Auto selecting of adjacent photo when filter is activated

Lets say you have 100 photos in a folder. Photo nr 51 has a red label and all the other photos have a green label. Photo nr 51 is the selected one. Now when I turn on the filter for the green labeled photos the first photo in the folder is selected. To me it would make much more sense to have the adjacent photo selected (nearest to your last selection) instead of the first one in the folder. This would be a time saver.
When the filter is already active and you change another green labeled photo to a red label, this photo will be hidden and the next adjacent photo is selected. That is the way it should work, also when you turn on a filter.
Thanks!

Have you rendered? I have had this problem in the past with RT. Goes away for me after i render the timeline.

Similar Messages

Lighroom 5 Auto-selecting of all photos

I have installed Lightroom 5 for Mac. It automatically grabs every photo I import. My preference would be to only have LR grab the photos/documents when I instruct it to do so. How can I set up LR to only grab photos when I instruct it to?

If by "grab" you mean "change photo source to import collection", then there is an Lr preference for it:
General -> Import Options
(2nd one down).
If you mean something else, then please clarify.
R

Selecting size of photo when printing on HP Office Jet 6500A from an Ipad

Hi, I have just setup my Printer and tried to print a photo from an Ipad, the prints are only coming out in A4 full page size. I have searched the User Guide and cannot find any reference as to how I can print them out in any sizes, I would like to print in Postcard size. Can someone assist please. Many thanks.

Hello KenA! Here's a link to an HP printing article on printing from an Apple iPAD:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
Take note:
With AirPrint, you do not have the option to select different paper sizes. Paper and media sizes are automatically selected depending on the application you are using on your Apple device, your HP ePrint product, and the region in which you are using AirPrint.
For example, from Apple’s Photo application, if the HP ePrint product has a separate photo paper tray, AirPrint will use 4x6 inch photo media as the default paper size. If the product does not have a separate photo paper tray, AirPrint will use letter-size paper. If you are printing from Apple’s Safari browser, letter-size paper will be the default paper size in the US region, and A4 will be the default paper size in Europe.
If you are using the HP Eprint center:
All photos e-mailed with HP ePrint will print at a default size of 4 x 6 inches (101.6 x 152.4 mm).
If your HP ePrint-enabled printer does not have a separate photo paper tray, just make sure that photo paper is the only paper loaded in the tray when printing photos.
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

How could auto-select customized row(s) when af:table loads?

for example,
the first row be selected at the first start up.
or, if i change/add a row, this updated row should be highlighted
JDev: 11g
any good solution for this use case?
Thanks.
Kevin.

Hi Frank,
but it doesn't work...
Thank you.
Kevin.

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.

Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

How to Turn Off the Auto-Select Function When Clicking In a Document?

Whenever I click my cursor within any document (Mail, Text, this post) sometimes an entire word is selected (highlighted in blue) rather than the cursor just being there blinking & ready for me to type. If I click again the entire line is selected, then the whole paragraph.
This is VERY frustrating when all I want to do is place my cursor within the document to edit or begin typing. If I'm not careful and click in a document and just start typing, the auto-selected text is deleted. Yikes!
Only my Mac Mini with the Leopard OS 10.5.8 does this, not my PowerBook w. Tiger OS 10.4.11. Thanks for any advice on this.

Correct, Sig.
When I checked the Double-Click speed in prefs, it was set all the way to the left -- SLOW. When I set it half-way to the right, problem was solved. Thanks much.

When I use the type tool or the selection tools, my photos blink between the photo and a black screen. Anyone else have this issue?

When I use the type tool or the selection tools, my photos blink between the photo and a black screen. Anyone else have this issue?

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

HT201401 how do i set my phone to auto rotate my photos when i turn my phone around?

how do i set my phone to auto rotate my photos when i turn my phone around?

Try unlocking the auto-rotation. Go to your multitasking bar (double tap Home button), then swipe from left to right. There should be a symbol there that looks like a circular arrow with a lock in there. See if it's 'locked'.

We have one iPhone3s w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud

we have one iPhone3gs w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud. How can I get all my photos from the iPhone3GS to iCloud?

You can't see inside a backup file on icloud, thus you can't view your photos at icloud.com.

Why i cannot delate my photos when i press select? Icon for delete is not appear.

Why i cannot delate my photos when i press select? Icon for delete is not appear.

Did you use iTunes to sync those photos onto your device? If so then the only way to get them off is to use iTunes to sync them off.
When you sync them on you choose a folder and say 'put all the photos in here on my iPad', so to take them off you need to deselect that folder or remove photos from that folder and sync to take them off.

IPod Touch Freezes when I select a certain Photo.

So I saved a photo to my iPod Touch to use as a background when i was surfing safari. Whenever I select the particular photo my iPod freezes until it crashes and restarts. I tried deleting the photo but it freezes before I can... I also tired resetting the iPod and everything was deleted but those photos.... its so ********. What else can I do?

What format are these movies in?
From this article: http://support.apple.com/kb/HT2729
What video content works with iTunes and mobile devices?
iTunes:
Video content purchased from the iTunes Store.
QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
Video podcasts.
iTunes Digital Copies.
iTunes Store Movie Rentals (Requires iTunes 9 or later).
B-rock

'Ignore Adjustment Layers' when auto selecting

Auto select - being able to highlight layers based on where you click in the image, is a very useful option. Especially for design based work.
What I want is a way to specify the auto-selecting of active layer content only (this could be pixel or vector of course). And for it not to pick up adjustment layers.This could be an additional option in the move tool options bar. It would also be picked up with the Command and Shift command shortcuts (control on PC) which are so useful as they are.
Unfortunately for those of us that work with very complex layered structures, with many adjustment layers at the top level - auto select will also pick up WHITE areas on masks which have content other than 100% white or black. Its actually quite rare than you want to highlight adjustment layers in this way, and it really gets in the way. It very quickly becomes impossible to auto-acivate layers underneath any masked adustment layers
I am also aware of the contextual Control click and choose any layer under the icon, but this is not a replacement.

A workaround to avoid auto selecting adjustment layers is to lock the adjustment layer.
But an option in the Move tool will be more elegant solution.

How to make Logic auto-select channel when external instrument is selected?

I recently upgraded hardware and now have to upgrade the OS 9 software (MOTU FreeStyle) I've been using and join the 21st century. I asked a Guitar Center employee about what package to buy and stressed that I wanted the software to auto-select the midi channel since that was a major benefit (for me) in using FreeStyle. I was informed that all of the newer DAW software did this (which made sense to me, after all FreeStyle was already at least 10 years old, although no longer under development (hence OS 9.) Logic Express was specifically recommended.
Sadly, I don't see this capability in Logic Express. I don't understand why, if I have 15 instruments set up, and I select a new one, I have to manually look at each of the other instruments (assuming I don't have their channels memorized) and see what channels have been used so that I don't accidentally reuse the same one for the new instrument. Doesn't the computer already know what channels are unused??
In FreeStyle could have 25 instruments set up for a 16 channel keyboard, and as long as there was never more than 16 voices playing at any particular time, the software just managed the channels for me. I don't know what happens if you go over 16 for a 16 channel instrument, I don't think I ever did (I never had voices cut out anyway.)
Not to berate Logic Express, there's lots of cool stuff in it that I'm looking forward to exploring, and it sounds like you have to jump through hoops even to get MOTU's Digital Performer to emulate the same behavior and I suspect it's as much of a hassle to set it up as to just do it on the fly (from previous experience of "what a salesman says" vs. "what is real.") I'm just trying to figure out how to make the computer do the computer work so that I can do the music work.
I have lots of partial (and even some complete!) projects to port over and not nearly as much spare time as I'd like to spend playing. I'd rather spend my meager spare time composing, not fighting with the technology.
Any ideas?
Thanks,
-David

Hi bunker,
I can't test it at the moment but I think that can be achieved by slightly changing the code like so:
*<script type="text/javascript" src="http://code.jquery.com/jquery-1.4.2.min.js"></script>*
*<script type="text/javascript">*
*$(document).ready(function(){*
*$("td.GFPFilter span input").focus(function(event){*
this.select();
this.value = '';
*</script>*
Also, if you found my posts helpful or correct could you apply those labels to the relevant posts?
Cheers,
J
Edited by: J Kremer on 20-Apr-2011 19:23
Edited by: J Kremer on 20-Apr-2011 19:30

Auto selecting of adjacent photo when filter is activated

Similar Messages

Maybe you are looking for