Auto-setup client mail with 3rd party servers?

Just curious if this was possible. I know Mail clients can get auto-setup with SLServer, but its likely only for SLServer's own Mail Server.

Hi
If you go to Workgroup Manager > Accounts > joe user > Mail
Click enabled and there is a nice little line that reads "Mail Server". You can type just about anything you want in there.
-or-
click forward and there is a line that accepts [email protected] as the input
Are either of those what you are looking for?
Bob

Similar Messages

SMTP outgoing mail through 3rd party servers

Apple Mac Mail - used to be fine sending email via a different SMTP server by setting up the SMTP details.
This seems to have stopped working and I am told by the service provider that BT must be doing something "strange" stopping my connection via SMTP to the mail servers I want to use.
Suggested that maybe the port was being blocked. Mail is trying 25, 465, 587 ports.
Any ideas

IanRS wrote:
LOve it to be something simple I did move to a new machine and latest OSX but I have switched the old one on and that fails too when it just worked for years.
Think I have a work round by using mail.btinternet.com as the outgoing server for all account but bemused as to why I should have had to do that.
Spent two hours on the phone today with BT. They escaleted the problem to a specialist support desk, which we then had to agree to paying a £30 charge if they were able to fix the problem as they say that it is a problem with mac mail. (Which it isn't because it works fine using a different broadband connection, and we have three laptops in the house all with same problem, using outlook as well as mail).
All three laptops have been working with out fault for the last four years and just before christmas they all stopped being able to send emails using hotmail. Obviously BT have changed something somewhere along the line.
The Specialist just changed our outgoing mail server to use BTs instead. (I have been using a different SMTP server anyway as a temporary fix since christmas) Whilst we are able to send emails, we are still unable to connect to hotmails SMTP server. Still had to pay the £30 though. As far as they are concerned that still counts as a fix. Another "solution" they gave me was to change the DNS address in system preferences- Not Ideal as everytime you connect your laptop to a new network you will have to reset them.An absolute joke.
Their direct number is 08000 321 118 if you need them to talk you through it. Best to have your bank card to hand.
Livid.

Cannot send mail through Windows Live Mail with 3rd party email address

I know this problem has been thoroughly discussed, and I basically understand it. I must change my outgoing port to 587 on my two non-Verizon email accounts that I pull into Microsoft Mail along with my Verizon mail. One of the accounts is my web site email with Network Solutions, and one is an email address through Onebox.com.
When I used port 587, neither worked to send email through Outlook Express or Windows Mail. I called Onebox. and was told to use (for them) port 465, which did not work to send, either.
I have not called Network Solutions yet. I did call Verizon Support, however, and the support person tried to find the solution. Finally, he told me I need to call Onebox again (and Network Solutions).
I am just checking to see if there is something I missed that anyone knows of. I would really like to consolidate my mail on my computer...it will be complicated if I cannot.
Thank you,
Laurie Bishop

What error did you get when you tried port 465?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

ANE with 3rd party libraries

Short Version: How does one package 3rd party dylib dependencies with an ANE on MacOS?
Extended Version:
I have an ANE that dynamically links with 3rd party libraries. I am working on MacOS.
My ANE framework dylib file links with the 3rd party library dylib. However, when I package a bundle application with the ANE, the ANE fails to initialize, throwing an Error: "ArgumentError: Error #3500". I have inferred that the issue is failure to find and link my 3rd party library dylib.
If I run my AIR app from a Working Directory that contains the 3rd party library, everything works. This implies that the linker is only looking in the Current Working Directory and not the locations of the 3rd party dylibs.
I have included my 3rd party dylibs with my ANE framework, for instance:
MyANE.framework/MyANE
MyANE.framework/Resources/3rdparty.dylib
I have used otool to inspect the linkage for MyANE.framework/MyANE:
MyANE:
          libMyANE.dylib (compatibility version 0.0.0, current version 0.0.0)
          @rpath/Adobe AIR.framework/Versions/1.0/Adobe AIR (compatibility version 1.0.0, current version 1.0.0)
          ./3rdparty.dylib (compatibility version 1.0.0, current version 1.0.0)
      /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 52.0.0)
          /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 159.1.0)
Ok, you see that it wants to load from CWD. I tried changing the 3rdparty.dylib linkage, as so:
install_name_tool -change ./3rdparty.dylib @loader_path/Resources/3rdparty.dylib MyANE
but the application displays exactly the same behavior: It only works if I run from the folder containing 3rdparty.lib.
Are there some kind of additional platform options I have to set while packaging the ANE?
Thanks!
JW

Hello,
I assume your client is standalone (or runs outside of the WLS JVM) if so you will need to put the required jars on your clients classpath.
cheers
Hussein Badakhchani
www.orbism.com

Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone". Sound comes through and it charges but NO Video???

Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone". Sound comes through and it charges but NO Video??? I have verified the cable, I can play video with sound from iPod Nano 4th gen.

composite don't support mirror so it will only display on the tv when the app being used support tvout option
the build in video app does so it should display on the tv at least my composite cable does with my iphone4
the audio always works it's pretty much works like a headset

PDF form auto-notification/pop-up on 3rd Party PDF readers

My livecycle generated PDF form wants to work only on Acrobat reader for user input and most importantly when summing numbers in the table field. I currently enable usage rights under Acrobat 9. The problem is that when people attempt to open the form with 3rd party PDF viewers I receive complaint that the form doesn't work; no numbers are summed, buttons and fields don't operate.
I'm searching for a method that will automatically manage and direct a user to execute the form through Adobe reader. The compliment to this statement is that I am searching for a method to detect and alert a user against trying to use a 3rd party pdf viewer. When the user does run the form in Adobe reader, my objective is to hide this particular instruction as it is not relevant. I'm very open to the method of instruction such as throwing a splash screen, adding javascript methods or dynamically writing text across the document, such as a water mark, that informs and instructs on how to successfully use the form.
Can anyone offer methods, techniques, behind code examples on how to manage this issue?
Any input and suggestion is greatly appreciated as I am at a road block.
Thanks,
DJG

Hi George,
Thanks for your interest. I looked carefully at possibly using dynamic form option but decided against adding the unnecessary complexity. Given the simplicity of the form, dynamics isn't needed. To your point, static is the most "robust" solution for my needs. I've tested with with reader from 9 on up and it works..... I just need to educate the user in a way so that this will be usable.
Often with web searches hitting the right key words is often critical. Problem is that I don't know enough about the PDF model that I may be missing key words. Am I missing something really obvious? In your opinion am I even describing this in the correct manner? Never hurts to get a second opinion.
Thanks much,
DJG

IPayment with 3rd Party payment system

Hi All,
I have to configure iPayment with the third party payment system. the 3rd party talks with the Paymentech for credit card processing.
Here in this case,
1. 3rd party server is providing web services to talk with them
2. 3rd party server is working fine with the Paymentech
Issues
1. As per my understanding, I have to use Gateway model overhere. Correct me if I am worng?
2. Do I need to create any configuration servlet to talk with 3rd party server or is there any other way?
3. At which point I should call the web services provided by 3rd party?
4. How to create request as per the web service requirements and how to solve the response provided by web services?
Thanks in advance

Hi,
If your third party system talks with Payment Tech, Is it possible for you to confiure payment Tech directly with iPayment. As you know that oracle provides all the necessary confguration and servelt. Its pretty striagt forward and simple.
Find out whether you can use payment tech directly, that should solve most of your issues. If you need more information, let me know
Thanks,
RK
925 998 1494
Independent Techno Func Consultant

HT204368 Can you (Handoff) control your iphone with 3rd party devices ? (Like making calls, sending message, etc...)

I am wondering if you can control your iphone or other iOS devices with 3rd party devices? I have in mind like making calls, sending sms, etc....
Thank you!

No,

Is message persistance with 3rd party queues implemented?

Is message persistance with 3rd party queues implemented for 9.0.2 or 9.0.3 prev?
I am not able to use Oracle JMS and want to try implementing this.
Documents on how to implement this would be helpful.
thanks,
Isaac

OC4J 9.0.2 is certified with few JMS providers like MQSeries, SonicMQ, SwiftMQ, etc. Please look at the Services Guide that documents how to use 3rd Party JMS providers.
regards
Debu

Adobe Muse form with 3rd party host is not working

I have uploaded a form with Adobe Muse to a 3rd party host. Upon testing the link scripts/form_check.php, I see 3 green checkmarks. Upon testing the form, the form appears to submit successfully, however I never receive the email.
I checked with the hosting company and this is what they said:
...this form is using localhost smtp of webserver which was stopped due to spamming issues...actually, localhost doesn't have proper rDNS record and the return path for all mails is the server itself, so whenever a client uses its domain for spamming the server's mail queue gets choked and creates issues for others. So we generally do not open localhost smtp and recommend users to use proper SMTP Authentication so that each mail will be delivered and won't create issues for server even if someone does spamming because in that case all mails will bounce back to the mailbox. So, we recommend you to use smtp authentication in the form and use proper smtp details to send mail.
Please provide a recommendation on what I should do to resolve this? Is there a way to modify the form so that it uses proper SMTP Authentication instead of Localhost?

Hi
Please refer to this document :
https://forums.adobe.com/docs/DOC-3581
Thanks,
Sanjit

Integration with with 3rd Party Document management System

Hi
We are implementing Invoice Management in SAP, using the Opentext VIM ECC Addon.
The Customer has a 3rd Party Document Management System called DocHarbour which is NOT Archivelink enabled.
The process flow is that Invoices will be scanned and available in a share drive somewhere.
Using SAP and Invoice Management Work, we would like to attached these documents to the relevant SAP Documents, and then post them to the 3rd Party Doc Management System , but the Images must be retreival in SAP at any time .
Everything tells me the 3rd party Doc Management System needs to be ArchiveLink enabled for this work.
Is anyone able to shed any light on this issue , provide possible solutions , workarounds or infor ?
Any help or information appreciated.
Thanks in advance.

Dear Minesh
My suggestion would be use SAP Content server provided by SAP as is easily available and easy to setup.
Doing Integration with third party involves much time and efforts.
Client always thinks of Moon. Always show him his city.
With Regards
Mangesh Pande

Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

No SDO Communication Using CAN over EtherCAT (CoE) with 3rd Party Slave

Dear all
We are trying to establish an EtherCAT communication between a cRIO 9024 as EtherCAT master with a 3rd party frequency comverter (bmaxx 4432) as EtherCAT slave. CanOPEN over EtherCAT is industry standard.
The slave device has a CAN in Automation (CiA) configuration 402, i.e. motion and drives. Thus it has a well configured address range, input/output parameters and the like. The frequency converter remains in INIT mode and waits for a PDO definition, sent via an SDO communication.
In LabView, adding an EtherCAT master in the cRIO system works fine. Adding targets and devices on the configured EtherCAT master also works fine after we imported an XML description of our third party EtherCAT slave. LabView detects the slave type and the version correctly. Thus, there must already be a rudimentary EtherCAT communication working between LabView and our 3rd party slave.
The problem is that we cannot establish a first SDO communication.
Every description I found was about using CANopen on a CAN bus hardware (e.g. NI 9861) plugged into the cRIO. Descriptions concerning EtherCAT are usually concerning an NI cRIO 9144 extension as slave, which is not what we have.
The NI CANopen library seems to definitely require the NI 9861.
Is this correct?
1)
Either it should be possible to define a kind of virtual CAN port based on the EtherCAT port, on which we can write to and read from with the NI CANopen library. This would be the preferred solution so we can use the CANopen VIs.
Is there a way to do this?
2)
Otherwise, there should be a possibility to establish a more basic SDO/PDO communication directly based on the EtherCAT interface.
Are there any NMT/SDO/PDO VIs available to do the programming?
Is there a manual document which would describe how to start the first communication setup via EtherCAT (CoE)?
My sincere thanks for any advice you can give.
Many cheers
Markus

Dear all,
I'm trying to establish a connection between a cRIO9068 and a BM 3300 via CoE.
I already had a hard time establishing a normal EtherCAT-connection.
Finally I could set the Scan engine to active, and I was able to get from "ini" and "pre operational" into "Safe operational" and "operational".
As I can see, you had similar problems as I do.
When I add my cRIO to my project (with the EterCAT-master) I can look for the slave device, and add it to my project.
Within this slave device, I can add two mods, as seen in the attachment.
These slots should include all the parameters, the drive provides, but actually I only end up with some "position mode" -parameters, I think those are the SDO's.
If I add these to a VI, the cRIO scan engine switches to configuration mode, but can't switch back to active mode.
Actually, the Baumüller slave device should be able to provide multiple parameters for read and write.
I can see them, wehn I go to "online device state" in the rightklick menu of the slave device (Parameter.png), but there's no way I can actually use them.
I can't add these "slots" on every computer.
On some computers it's possible, on some it isn't.
Thanks for any advice, you can give.
Yours sincerely
Karl
Attachments:
slot 1.PNG ‏6 KB
slot 2.PNG ‏9 KB
Parameter.PNG ‏46 KB

USB Sync with 3rd party Software

Seem like Verizon is determined to press using it's restrictive syncing technique with MS Outlook. I guess they still want to compete with Outlook. There is an issue with USB sync with the Droid X.
Android OS 2.2 supports TETHERING, but Version does not. By allowing tethering, 3rd party software can sync with the Droid X via USB.
Why is Verizon restricting a feature so many business users want? To compete with Apple, Verizon should wise up and support its user communit to allow easy syncs with Outlook (Contacts, Notes, Calendar) at the subdirectory level. Business people will not post their sensitive information on the Google site in order to sync with their phone.
Wise up Verizon! You are missing an opportunity in your battle with Apple!

Hi Nitsan
You need to contact Oracle to see if they can help you. Supporting a Discoverer installation without a support number (CSI Number) is not the right thing to do. You need to pay up and buy the necessary support so that you can get the help you need.
Having said that, Oracle do produce lists of certified operating systems and platforms etc and you will not have a lot of luck if you go outside those boundaries. I'm not saying that you have but usually if their product works on one platform but not on another it is usually something at the platform end that is causing the problem. In this case the first place I would look is to see whether there are any settings within the 3rd party security software that can be applied to tell it that anyone running Discoverer inside IE is allowed to do so.
It may be as simple as allowing JInitiator to work. You may also want to try using the Sun JRE instead to see if that helps.
I strongly recommend you buy a support license. You can buy these relatively cheaply and they can be purchased in groups of I believe 25 requests (could be a different number) thus keeping the cost down. If you yourself are an independent consultant you can buy your own support license and use that to get help for your clients.
Best wishes
Michael

Auto-setup client mail with 3rd party servers?

Similar Messages

Maybe you are looking for