Auto shot down no longer works

I pulled a power plug out of my iMac. And now my 2 external Seagate drives no longer auto shut down. They stay on unless I pull my firewires 800 and 400 out.
The new Free agent Seagate doesn't have the on and off buttons. Its very frustrating.
What happened to my OSX ?

Hi Girshon Rutstein-
Have you tried un-mounting the drives before shutting down?
Luck-
-DP

Similar Messages

Lightroom: Why does auto white balance no longer work after changing the camera calibration profile?

I'm using NEF raw files from Nikon.
Lets say for example I import a NEF file into Lightroom (v4) and click on 'auto' for white balance. The white balance in the image is adjusted correctly (somewhat). However, if I then change the camera profile (in the camera calibration section) from 'adobe standard' to 'camera standard' then the white balance in the image becomes very wrong. I then have to set the white balance back to 'as shot' and correct it manually instead.
Why would 'auto white balance' no longer work just because I change the profile from 'adobe standard' to 'camera standard'?
Any ideas?

Works as expected here...
Which Lr version and what OS??

Key code 24 using control down - no longer works in 10.6

I have a script that should open a dialog box to make a picture using Copernicus. the command I try to invoke is 'Control ='.
here is the script.
tell application "Copernicus"
activate
delay 2
tell application "System Events"
key code 24 using control down
end tell
end tell
or alternative I tried:
tell application "Copernicus"
activate
delay 2
tell application "System Events" to keystroke "=" using control down
delay 5
end tell
However both do not work, it does do nothing on - key code 24 using control down -.
If I do a manual 'Control =' it works regardless if the Application is active or in the background.
Has anything changed in 10.6 that this sort of code no longer works? How do I set it up for this to work?
Message was edited by: ChangeAgent

Pierre L. wrote:
I have downloaded Copernicus 1.5.2 (Build 15) just to better understand the issue.
is what I use.
However, I am unable to find any “Control =” keyboard shortcut in any menu of that application. Does that shortcut belong to Copernicus, or is it a shortcut that you have added yourself in the Keyboard pane of the System Preferences?
I added it replacing 'F7' for various reasons. however “Control =” works if I do it via the keyboard.
As for me, after assigning a “Control =” keyboard shortcut to a TextEdit menu command, I have no problem invoking it from the following script.
*tell application "TextEdit" to activate*
*tell application "System Events"*
*key code 24 using control down*
*end tell*
OK. as said it works using the keyboard, but not via the script. could it have something to do with Copernicus? I simply do not understand as to why it does not work using a script.

My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

Sounds that you have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

Screen Shot Problem (No Longer Working)

For some reason, I suddenly cannot take a screen shot! I'm using Snow Leopard on a MacBook Pro, and I keep trying to take a screen capture shot of a website for a friend, but when I hit optionshift3 in both Firefox and Safari, nothing happens! I even restarted and the problem is persisting. Is there some way to fix this? I just can't figure out what I could have done to make this function not work any longer.

Command + Shift + 3 for entire screen
Command + Shift + 4 for selected area
Go to Finder > Help menu. Type in "shortcuts for taking picture of screen" for more information.
cornelius

Arrow keys up and down no longer working NOT caret browsing.

I'm running the Nightly 64-bit build on Windows 7. Two or three nights ago one of the updates came down the pipes and my arrow keys stopped working correctly. When typing in either a url or search if you try to scroll through it will only hit the top and bottom (and hitting down responds like I've hit the up) I've checked caret browsing and disabled all addons to test and still no luck. In the search area I've noticed it only hits 1/3 of the suggestions. Why is this happening? I've had to resort to typing out the full url and search or using the mouse which is sometimes annoying given I used to just hit one down arrow and press enter no need to move my right hand from the keyboard at all.

Since you are Testing the unstable Nightly channel builds, you may be better off getting help in http://forums.mozillazine.org/viewforum.php?f=23 where many Testers hang out as almost everybody here uses Releases and maybe Betas.

SCREEN SHOT FEATURE NO LONGER WORKS

I was successful using the command/control/shift/4 key stroke process to evoke a cursor to frame a phto from my iMac screen - and then it stopped working! What do I need to do to get it to work again?

Make sure the shortcut is still set:
System Preferences > Keyboard > Keyboard Shortcuts > Screen Shots (in the pane on the left)

Keyboard command to shut down no longer works after Leopard & 10.5.1

I recently upgraded to Leopard and 10.5.1 (all at once) and now the Ctrl-Opt-Cmd-Eject shortcut to shutdown doesn't work.
Any ideas or maybe a preference setting somewhere?

MacSavage wrote:
I cannot create a new thread on this forum in Safari, however. It works in Firefox, but in Safari there is no button (link) to create a new thread.
*Hi M'S', Welcome* to Apple's Users Help Users Forums.
A bit of a puzzler there. The button to create a new thread is *not in Safari, it's on the forum page.* (Not the Categories page, a bunch of folders, a level too far back.)
Good Luck, JP

PgUp/PgDn no longer work after upgrading to Firefox 4

I just upgraded from Firefox 3.6 to 4.0., and now the PgUp/PgDn keys (page up/page down) no longer work. Or rather, they act as though caret browsing (F7) is turned on, which it is not. (In caret browsing, PgUp is like the back button and PgDn is like the forward button.) To confirm that caret browsing is off, I've hit F7 and clicked No (multiple times), and also checked about:config, which shows that accessibility.browsewithcaret is false.
More info: (1) Options > Advanced > General > Always use the cursor keys to navigate within pages is unchecked, (2) the PgUp/PgDn keys also don't work when Firefox is restarted in Safe Mode, (3) they don't work on any webpage, (4) they do work correctly in other applications (Microsoft Word, etc.), (5) my operating system is Windows 7 Home Premium (64-bit), and (6) I run Microsoft Security Essentials (antivirus software).
Any ideas?
Could this be a bug? If so, what is the procedure for uninstalling Firefox 4 and returning to Firefox 3.6 -- without losing my bookmarks, add-ons, etc.?
Thanks!

dmtf2010 nailed the problem here (https://bugzilla.mozilla.org/show_bug.cgi?id=640587#c48):
So, the solution is:
1. Go to about:config
2. Find ui.elantech_gesture_hacks.enabled
3. Change its value from -1 to 0
4. Restart FF
5. If you run into a bug that option was designed to fix (non-working page swipe gestures), install the latest Elantech driver (http://www.techspot.com/drivers/driver/file/information/14513/) and reboot.
I've tried his solution and, so far, so good. :)

Mythtv, auto shutdown no longer working, scheduler.cpp ?

Following a recent update the automatic shutdown of my backend is no longer working (well, at least not reliably).
I have 3 scripts set up in the relevant sections of the mythtv-setup to check if myth is ok to shut down, set the new wakeup time and perform the actual shutdown. These scripts still work alright, but the backend is not initiating the shutdown any more in some cases.
Lots of trial and error makes me think that this is somehow related to scheduler.cpp, but I am not sure if this is the case or how to fix it.
I think I have established a pattern:
Scenario 1:
- Boot backend
- do nothing else (e.g. start remote frontend or mythfrontend on the backend)
- automatic shutdown does not work
Scenario 2:
- Boot backend
- start remote frontend
- shut down frontend
- automatic shutdown does not work
- restart backend service (without reboot)
- automatic shutdown works
I also notice that in scenario 2 (when automatic shutdown works) there are a whole heap of these kind of messages right until shutdown occurs:
2013-04-29 19:18:07.592125 N [660/738] Expire autoexpire.cpp:641 (SendDeleteMessages) - Expiring 156 MB for 1073 at 2013-04-13T11:50:20Z => Hulk
2013-04-29 19:18:07.632899 E [660/660] CoreContext mainserver.cpp:2610 (DoHandleDeleteRecording) - ERROR when trying to delete file: myth://192.168.1.103:65103:6543/1070_20120126203445.mpg. File doesn't exist. Database metadata will not be removed.
2013-04-29 19:18:07.889638 E [660/660] CoreContext mainserver.cpp:2610 (DoHandleDeleteRecording) - ERROR when trying to delete file: myth://192.168.1.103:65103:6543/1022_20120206192600.mpg. File doesn't exist. Database metadata will not be removed.
In scenario 2 (successful) I see the following in the log just before the above auto expire stuff:
Scheduler scheduler.cpp:2307 (HandleRunSchedulerStartup) - Scheduler: Seem to be woken up by USER
then a whole heap of auto expiry stuff and finally:
Scheduler scheduler.cpp:2862 (CheckShutdownServer) - CheckShutdownServer returned - OK to shutdown
2013-04-29 19:19:55.276775 N [660/735] Scheduler scheduler.cpp:2947 (ShutdownServer) - Running the command to set the next scheduled wakeup time :-
sudo /home/laffi/scripts/MythSetWakeup 1367229120
2013-04-29 19:19:55.372582 N [660/735] Scheduler scheduler.cpp:2974 (ShutdownServer) - Running the command to shutdown this computer :-
sudo /home/laffi/scripts/MythShutdown
In scenario 1 (unsuccessfull shutdown) I also get
Scheduler scheduler.cpp:2307 (HandleRunSchedulerStartup) - Scheduler: Seem to be woken up by USER
and then autoexpiry, but then, once a frontend connects:
ProcessRequest mainserver.cpp:1385 (HandleAnnounce) - adding: frontend as a client (events: 0)
I don't get autoexpiry of files and no shutdown, both of which I believe are initiated by scheduler.cpp
I also noticed the following in the logs when auto shutdown does not work:
2013-04-29 15:40:36.046359 I [648/848] ProcessRequest mainserver.cpp:1385 (HandleAnnounce) - adding: mythbackend as a client (events: 1)
which does not seem to appear in the logs when auto shutdown works.
Any ideas ? I have found very little (next to none) regarding scheduler.cpp when searching.

The other side of the VPN is a TMG server hosted at our main office. I can connect to it off site, and others were connected to it remotely as well, but for some reason users at that remote site can no longer connect to the VPN.
I talked to my ISP wondering if there was something that was blocked due to the change from dhcp to static IP addresses, but they don't see anything.

I can no longer down load on iTunes said I need a new payment method but why does my bank card no longer work how do I fix this

Hey everyone I can no longer down load or up date my games videos so on on iTunes
It's telling me I need a new payment method but why would my bank card no longer work how can I fix it so my bank card works again

how do i fix this

My ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an u

my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor song

If your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use

I bought pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

I bought Pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

All apps are always tied to the account from whaich they were purchased and will always have to be updated using that account.
Just because the e-mail account is shut down, has nothing to do with the itunes account. Why did you create a new account? Why not just change the e-mail associated with the old account?

Our menu bar no longer works correctly. The flyouts only show the first menu option and none of the drop-down menu options.

In previous versions of Mozilla we had drop-down menus that contained flyouts that offered more drop-down options. This no longer works in Mozilla 4. If you look at our website in IE7, 8 or 9 and Mozilla 4.0.2 they now work differently. (www.saskschoolboards.ca) Eg. Under About Us / Committees there should be three more dropdowns on a flyout - Committee List; MEPP Report and Semi-Annual Report form. Mozilla 4.0 only shows Committee List and no other drops downs. All of our flyouts are showing only the first selection and nothing else.
Other affected menus dropdowns are:
Board Dev / Trustee Development (there should be 4 dropdowns - not just one)
Communications has Surveys and Elections
Why is Mozilla not showing our menus correctly anymore?
Andrea Ashton - [email protected]

I see this error in the Tools > Error Console: 
 
<blockquote>Error: D.getStyle is not a function
Source File: http://www.saskschoolboards.ca/js/mootools.js
Line: 279
</blockquote>
It looks that the mootools script is no longer compatible with Firefox 4. 
Google Chrome behaves the same and also doesn't open the sub-menus properly and keep the first entry on display once it is open.
Did you check if there is an update for that script?
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

Auto shot down no longer works

Similar Messages

Maybe you are looking for