Auto Start 4.5.1 & Console startup

I have two questions (hope I have the correct newsgroup). To Start my
WebExpress server 4.5.1 on NT Server 4.0, I have to change to the Weblogic
Directory and type in startWeblogic.cmd.
- I will be managing the server remotely. How can I have it start
automatically for example when I reboot my server?
- I also noticed when I connect using the WebLogic Console, before I can
login I have to click on the Advanced button and change the port from 7001
to 80. How can I change the default to 80?
Thank You,
Tom Kochanowicz
mailto:[email protected]

Tom,
- I will be managing the server remotely. How can I have it start
automatically for example when I reboot my server?You should install WLS as an NT service.
- I also noticed when I connect using the WebLogic Console, before I can
login I have to click on the Advanced button and change the port from 7001
to 80. How can I change the default to 80?
I don't know why this happening. The Console should know to remember the
port number. Can you file a bug report?
Thanks!
Michael Girdley
Sr. Product Manager
WebLogic Server
BEA Systems
ph. 415.364.4556
[email protected]
Tom Kochanowicz <[email protected]> wrote in message
news:81obcj$254$[email protected]..
I have two questions (hope I have the correct newsgroup). To Start my
WebExpress server 4.5.1 on NT Server 4.0, I have to change to the Weblogic
Directory and type in startWeblogic.cmd.
- I will be managing the server remotely. How can I have it start
automatically for example when I reboot my server?
- I also noticed when I connect using the WebLogic Console, before I can
login I have to click on the Advanced button and change the port from 7001
to 80. How can I change the default to 80?
Thank You,
Tom Kochanowicz
mailto:[email protected]

Similar Messages

How to switch off auto start of replication sp's.

hi,
I was checking my sqlserver's master database and found some body has swithched on auto start
of the following sps.
sp_MScleanupmergepublisher
sp_MSrepl_startup
May be some one was exprerimenting with replication.
pls tel me how can i switch them off?
i was hesitating to use this command
"sp_procoption 'spname', 'startup','off'"
, because i thought some on might have configured some thing else also for replication
or there might be some other way to swithch of these replication sp.
yours sincerely

You dont want to stop these.
These are automatically started when SQL Server starts provided you have replication configured.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Virtual keyboard auto starts in Windows 8.1 Pro

Even if the toolbar is turned off and the toolbar is locked, and under ease of use the checkbox is unchecked, this pesky icon keeps coming back. Is there a registry fix... users are complaining. thx!
Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

Hi,
Please know that it’s powered by a windows service called Touch keyboard and handwriting
pane. Stopping this service will be in result of disabling the on-screen keyboard.
Let’s try to disable the service related to the touch keyboard:
1. Press Win+R, type “services.msc“, and press Enter to bring up Services window.
2. Scroll down a bit until locate the service called Touch keyboard …
3. Double click it, first to stop it if it’s running, and then change the Startup type to either Manual or Disable to prevent it from auto-starting next time when computer starts.
Hope these could be helpful.
Kate Li
TechNet Community Support

Skype/Pulse audio problem only if auto started

Hi,
I've an Arch/XFCE laptop including pulse audio and Skype (configured to use the pulse audio).
Skype has been configured (using XFCE startup menu) to auto start during boot ( we boot daily), and, till about 2 weeks ago, worked fine.
Ever since, Skype starts but isn't functional (while trying to connect to the test service I can't hear anything, not even the dialing), and, after a few minutes, starts with a constant loud noise (which stops, once I quit Skype).
Interesting, since the problem has begun, once I do either of the following, Skype returns, and remains, to be fully functional without any noise:
1. Quit the auto-started Skype, and immediately relaunch it.
2. Cancel to Skype auto start, and manually start Skype after XFCE becomes visible.
Looking at log files (below), I've seen some pulse audio related errors which I couldn't solve and may be related.
I do a full system update (almost) daily.
I'd be happy to return to the former state (functional auto-started Skype). Please advise
Thanks
----------partial end of journal------------------
Jun 08 08:51:08 Ira-Lenovo lightdm[246]: ** (process:272): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
Jun 08 08:51:08 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting user-620.slice.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Created slice user-620.slice.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting User Manager for UID 620...
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting Session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd-logind[234]: New session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started Session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: pam_unix(systemd-user:session): session opened for user lightdm by (uid=0)
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Paths.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Paths.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Timers.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Timers.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Sockets.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Sockets.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Basic System.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Basic System.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Default.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Default.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Startup finished in 78ms.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started User Manager for UID 620.
Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Activating service name='org.a11y.atspi.Registry'
Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Successfully activated service 'org.a11y.atspi.Registry'
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Unable to register client with session manager
Jun 08 08:51:15 Ira-Lenovo lightdm[246]: ** (process:297): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
Jun 08 08:51:15 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session closed for user lightdm
Jun 08 08:51:15 Ira-Lenovo lightdm[297]: pam_unix(lightdm:session): session opened for user ira by (uid=0)
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting user-1000.slice.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Created slice user-1000.slice.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting User Manager for UID 1000...
Jun 08 08:51:15 Ira-Lenovo systemd[302]: pam_unix(systemd-user:session): session opened for user ira by (uid=0)
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting Session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd-logind[234]: New session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started Session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Paths.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Paths.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Timers.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Timers.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Sockets.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Sockets.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Basic System.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Basic System.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Default.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Default.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Startup finished in 36ms.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started User Manager for UID 1000.
Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Jun 08 08:51:18 Ira-Lenovo systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jun 08 08:51:18 Ira-Lenovo systemd[1]: Started RealtimeKit Scheduling Policy Service.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully called chroot.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully dropped privileges.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully limited resources.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Watchdog thread running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Canary thread running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 328 of process 328 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 332 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 333 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 3 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module-gconf.c: Unable to read or parse data from client.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module.c: Failed to load module "module-gconf" (argument: ""): initialization failed.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] main.c: Module load failed.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-odf-thumbnailer.so": libgsf-1.so.114: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-poppler-thumbnailer.so": libpoppler-glib.so.8: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jun 08 08:51:22 Ira-Lenovo kernel: fuse init (API version 7.22)
Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounting FUSE Control File System...
Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounted FUSE Control File System.
Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 392 of process 392 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Supervising 4 threads of 2 processes of 1 users.
Jun 08 08:51:22 Ira-Lenovo pulseaudio[392]: Daemon already running.
Jun 08 08:51:23 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Jun 08 08:51:23 Ira-Lenovo systemd[1]: Starting Disk Manager...
Jun 08 08:51:24 Ira-Lenovo udisksd[401]: udisks daemon version 2.1.3 starting
Jun 08 08:51:24 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 08 08:51:24 Ira-Lenovo systemd[1]: Started Disk Manager.
Jun 08 08:51:24 Ira-Lenovo udisksd[401]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 08 08:51:25 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Jun 08 08:51:25 Ira-Lenovo systemd[1]: Starting Daemon for power management...
Jun 08 08:51:26 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UPower'
Jun 08 08:51:26 Ira-Lenovo systemd[1]: Started Daemon for power management.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): carrier now ON (device state 20)
Jun 08 08:51:26 Ira-Lenovo kernel: r8169 0000:06:00.0 enp6s0: link up
Jun 08 08:51:26 Ira-Lenovo kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Auto-activating connection 'Wired connection 1'.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) starting connection 'Wired connection 1'
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTING
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) scheduled...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) started...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) scheduled...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) complete.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) starting...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) successful.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) scheduled.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) complete.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) started...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> dhcpcd started with pid 440
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning IP6 addrconf.
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) complete.
Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: version 6.3.2 starting
Jun 08 08:51:28 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed nbi -> preinit
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: DUID 00:01:00:01:1a:27:1d:43:1c:75:08:53:82:9a
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: IAID 08:53:82:9a
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: soliciting an IPv6 router
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: rebinding lease of 192.168.1.13
Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: leased 192.168.1.13 for 3600 seconds
Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: adding route to 192.168.1.0/24
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed preinit -> bound
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> address 192.168.1.13
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> prefix 24 (255.255.255.0)
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> gateway 192.168.1.1
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '192.117.235.235'
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '62.219.186.7'
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) started...
Jun 08 08:51:35 Ira-Lenovo dhcpcd[440]: enp6s0: removing route to 192.168.1.0/24
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTED_GLOBAL
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Policy set 'Wired connection 1' (enp6s0) as default for IPv4 routing and DNS.
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Writing DNS information to /usr/bin/resolvconf
Jun 08 08:51:36 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) successful, device activated.
Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Jun 08 08:51:36 Ira-Lenovo systemd[1]: Starting Network Manager Script Dispatcher Service...
Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jun 08 08:51:36 Ira-Lenovo systemd[1]: Started Network Manager Script Dispatcher Service.
Jun 08 08:51:41 Ira-Lenovo dhcpcd[440]: enp6s0: no IPv6 Routers available
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): IP6 addrconf timed out or failed.
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 08 08:51:59 Ira-Lenovo su[587]: (to root) ira on pts/0
Jun 08 08:51:59 Ira-Lenovo su[587]: pam_unix(su:session): session opened for user root by ira(uid=1000)

See https://bbs.archlinux.org/viewtopic.php?id=182030
Here's the change you recently applied: https://projects.archlinux.org/svntogit … 882c43178c.

Problem with auto start-stop script

Hi to All,
Logged as root. I have create in /etc/rc.d/init.d this file and saved as dbora (Oracle Linux 5.4):
+#!/bin/sh+
+# chkconfig: 345 99 10+
+# description: Oracle auto start-stop script.+
+#+
+# Set ORA_HOME to be equivalent to the $ORACLE_HOME+
+# from which you wish to execute dbstart and dbshut;+
+#+
+# Set ORA_OWNER to the user id of the owner of the+
+# Oracle database in ORA_HOME.+
ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
+if [ ! -f $ORA_HOME/bin/dbstart ]+
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
+'start')+
+# Start the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
touch /var/lock/subsys/dbora
+;;+
+'stop')+
+# Stop the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
rm -f /var/lock/subsys/dbora
+;;+
esac
After creation I have execute:
*#chmod 750 /etc/rc.d/init.d/dbora*
*#chkconfig --add /etc/rc.d/init.d/dbora*
The last command return this message:
+"service dbora does not support chkconfig"+.
Can You help me? Have You an idea ?
Thank You and best regards
Gaetano

sb92075 wrote:
Oracle RDBMS needs to be started by process running at OS level as owner of Oracle software; typically OS user "oracle" & not as ROOT!Ok,
But I have founded this script at [http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php].
The article report:
Article
When using RAC or ASM under Oracle 10g Release 2 or above, the Oracle Clusterware automatically starts and stops the Oracle database instances, so the following procedures are not necessary. For all other cases, you can use the methods described below.I must suppose, that the author has written an incorrect article?
Best Regards
Gaetano

Auto start Oracle instance in linux

Can I configure oracle to auto start an oracle instance in linux environment ?

Here are the steps to enable the oracle service start automatically during the system boot
Login as root in Linux box to execute the following steps
1. the flag set to Y in /etc/oratab file with the respective instance
2. Copy the oracle script in /etc/init.d folder
3. change the permission < chmod 755 <script filename>
4. add the service <chkconfig --add <script filename>
5 Put the service auto on <chkconfig <script filename> on >
6. To verify the oracle service startup automatic < service <script filename> stop > < service <script filename> start >
Regards
N Jandial

Auto-Start Items

Before I delete the 2 entries form the auto start, can I prevent Adobe Acrobat & Adobe Reader and Acrobat Manager from starting at system startup??
A only installed Adobe Reader. I don't know why Acrobat is in there.
James

don't know about 1) but 2) ie easy to fix. when you are saving the script from the script editor uncheck the box "Startup Screen".

Where to put EM db console startup script?

I have 2-node RAC on Linux servers. All the services including database/listeners come up automatically after the Node reboot.
Oracle support confirmed that "db console" is not a part of auto-start script.
So I have to put together a script basically to do "emctl start dbconsole".
Need to know what is the best place/file to call this script, keeping in mind the CRS/database take sometime to comeup.
Thanks

Oh sorry. No, RAC don't use dbstart.
You probably have to come up with a simple script that just do emctl start.
For example, call this file oraem
modify based on the sample dbora script from Oracle doc.
#! /bin/sh -x
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
# Change the value of ORACLE to the login name of the
# oracle owner at your site.
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
PLATFORM=`uname`
export ORACLE_HOME PATH
case $1 in
'start')
        $ORACLE_HOME/bin/emctl start dbconsole &
'stop')
        $ORACLE_HOME/bin/emctl stop dbconsole &
        echo "usage: $0 {start|stop}"
        exit
esac
exit# chgrp dba oraem
# chmod 750 oraem
Test run it manually a couple of time make sure it works.
then link,
# ln -s /etc/init.d/oraem /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/oraem /etc/rc.d/rc3.d/S99dbora

Auto start-stop script

Hi to All,
I have create as root in /etc/init.d the file dbora:
+#!/bin/sh+
+# chkconfig: 345 99 10+
+# description: Oracle auto start-stop script.+
+#+
+# Set ORA_HOME to be equivalent to the $ORACLE_HOME+
+# from which you wish to execute dbstart and dbshut;+
+#+
+# Set ORA_OWNER to the user id of the owner of the+
+# Oracle database in ORA_HOME.+
ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
+if [ ! -f $ORA_HOME/bin/dbstart ]+
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
+'start')+
+# Start the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
touch /var/lock/subsys/dbora
+;;+
+'stop')+
+# Stop the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
rm -f /var/lock/subsys/dbora
+;;+
esac
After I have execute:
*#chmod 750 /etc/init.d/dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc0.d/K01dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc4.d/S99dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora*
At last
*#chkconfig --add /etc/init.d/dbora*
This message is returned
dbora service don't support chkconfig.+
Have You an idea ?
Thank You and best regards
Gaetano

Solved !
I have inserted a space before chkconfig and description in the script:
Incorrect Code:
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
This is the correct code
#!/bin/sh
#chkconfig: 345 99 10
#description: Oracle auto start-stop script.Bye
Gaetano

Console startup of WLS - Where does console get CLASSPATH?

Hi-
I just installed the eval version of WLS 5.1 + SP5 on my NT4 box. I followed the
SP5 installation instructions for modifying my classpath to include the new sp5
jars. Here's the output of wlconfig:
WebLogic startup settings are presently:
CLASSPATH Prefix d:\weblogic\lib\weblogic510sp5boot.jar
CLASSPATH
d:\weblogic\lib\weblogic510sp5boot.jar;d:\jdk1.3\lib\tools.jar;d:\jdk1.3\jre\lib\rt.jar;d:\jdk1.3\jre\lib\i18n.jar;d:\weblogic\license;d:\weblogic\classes\boot;d:\weblogic\classes;d:\weblogic\lib\weblogicaux.jar;d:\weblogic\eval\cloudscape\lib\cloudscape.jar
JAVA_HOME d:\jdk1.3
WEBLOGIC_LICENSEDIR d:\weblogic\license
WEBLOGIC_HOME d:\weblogic
system properties:
java.security.manager
java.security.policy==d:\weblogic\weblogic.policy
weblogic.system.home=d:\weblogic
java.compiler=NONE
weblogic.class.path=c:\weblogic\lib\weblogic510sp5.jar;d:\weblogic\license;d:\weblogic\classes;d:\weblogic\myserver\serverclasses;d:\weblogic\lib\weblogicaux.jar
INITIAL_HEAP 64 MB
MAX_HEAP 64 MB
SERVERCLASSPATH
d:\weblogic\lib\weblogic510sp5boot.jar;d:\jdk1.3\jre\lib\rt.jar;d:\jdk1.3\jre\lib\i18n.jar;d:\weblogic\classes\boot;d:\weblogic\eval\cloudscape\lib\cloudscape.jar
Now: If I start the server using startWebLogic.cmd and then attach the console
to it, I see that I'm running SP5 and the CLASSPATH is what I expect. However,
if I start WLS from the console I see that
d:\weblogic\lib\weblogic510sp5boot.jar is NOT in the CLASSPATH and I'm actually
running the "original" WLS 5.1
My question: Where is the console getting its settings, if not from the
registry? How can I change the console settings so it uses the right CLASSPATH?
Thanks,
James Scott

I'm not sure I understand your specific problem. Can you provide some details.
WLS does not require its admin console to be running, and it can be run in the background. (ie started via nohup from an init script.)
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Is there any app for phone auto start after swithced off??

Is there any app for phone auto start after swithced off??

Are you looking for an app which will startup the Z10 at a specified time?
I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Auto-start application on Container/Server restart

What's the easiest was to have the container auto-launch a specific application whenever it is started/restarted? I assume this would also happen if the entire server were rtestarted?
_mike

Hello,
If you put a server in your project and you put the servlet at auto-start your application will start automatically when the server will start.
To do that you just have to use the element:
<load-on-startup>1</load-on-startup>
in the servlet tag.
server.xml:
<application name="foo" path="../applications/foo.ear" auto-start="true" />
http-web-site.xml:
<web-app application="foo" name="foo-web" load-on-startup="true" root="/foo" />
Regards
Tugdual Grall

Auto start application in web logic

Hello,
I need to auto startup an application in a unix server. The application uses session bean to access the database.
Is it possible to auto start up the application using a cron tab/cron job because the application is using session bean residing in weblogic server?
If not how do i do that? convert the session bean into normal java classes and access database without using a session bean?
Thanks for you help.

Hi,
I tried adding the listener .
It work in tomcat but after i transport it into weblogic 5.1, i give this error.
Received SAXParseException from Sun Parser at line 5, column -1: org.xml.sax.SAXParseException: Element "web-app" does not allow "listener" here.
I removed all other elements and it stil l wont work...
<listener>
<listener-class>com.SAW.project.servlet.SVLTriggerServlet</listener-class>
</listener>
Is there any way to fix this?
Or what s the correct way to wrtie a program that do something once everyday, auto start up when webserver startup and use Session bean to access database?
I tried using cron job but i dont think i can because im using EJB in my program..init() is not called when u start the server...
im going to try the <!ELEMENT load-on-startup (#PCDATA)> to start it using a http servlet instead of a listener...

Auto-Start Tidal Agent services

Hi all,
Do you guys have an idea on how to auto-start the service of tidal agent in linux? Thanks!

Thanks guys for the inputs.
It is now working, this is what I did:
I created "mystartup.sh" at etc/rc.d/init.d with this script inside:
#!/bin/bash
/opt/TIDAL/Agent/bin/tagent TIDALAGENT1 start
#author: Lodz
#chkconfig: 345 25 75
#description: tidal agent auto startup
then i added the shell script on boot using this commands:
# chkconfig --add mystartup.sh
# chkconfig mystratup.sh on

Auto Start/Shutdown db on Linux (RHEL-4)

Hello,
I have posted a thread in Database General forum :
Auto Start/Shutdown db on RHEL 4
and there one suggestation i got that i have to raise my problem here itself only.
Kindly look into the issue and help me.
Thanks & Regards
Girish Sharma

I see you start this service at sequence "99". This is good, but there are other 99-level startup scripts as well. These are processed in alphabetical order. Do this:
$ ls /etc/rd5d.d/S99*
So, "dbora" will run even before rc.local and that may not be a good thing.
Also, checking:
$ ls /etc/rc5.d/K* | head -n15
will show you the order in which services are shut down, again in alphabetical order.
These steps may help:
# /sbin/chkconfig dbora off
# /sbin/service dbora stop
# cd /etc/init.d/
# /sbin/chkconfig --del dbora
# mv dbora xxx-dbora
# vi xxx-dbora
# /sbin/chkconfig --add xxx-dbora
# /sbin/chkconfig xxx-dbora on
# /sbin/service xxx-dbora start
What we are doing is:
1) Remove existing dbora service
2) Rename the service to something that shows last in an ls(1) command
3) Edit the xxx-dbora script to change the chkconfig info from "99 10" to "99 01"
4) Installed the service.
Now, the start-up is done as the very last action and shutdown as the very first.
Does this make any difference?

Auto Start 4.5.1 & Console startup

Similar Messages

Maybe you are looking for