Auto start up on airport question

when i shut down my mac and turn it back on it, airport doesnt find my wireless router, unless i go to it and select it, how do i automatically set it so it finds it automatically when i start it up.

my alienware ***** got it bout 1 1/2 years ago, its heavy and bulky and now its not to fast, but my brother just got the new m7700 its freakin huge, not portable at all but its really fast, i pefer my macbook, its still more stylish, and about 10 times more portable, unless you absolutely want the fastest then alienware would be good.

Similar Messages

AUTO START WHEN CONNECTED

AUTO START WHEN CONNECTED In Backup, NAS to USB AUTO START WHEN CONNECTED: What does this actually mean, in BACKUP of Dashboard? Will it auto sync every time a change takes place on the NAS? Or must the USB be removed and reinserted into the USB port on the MCM?

No, the clue's in the name It's a one-off single process, just triggered by the drive connection rather than by manual starting via the dashboard. When you connect the drive, it will trigger the backup, which will then proceed to the end and stop just as if you had manually started the backup. But at the end, if you want to backup again, you have to either manually restart it or disconnect and reconnect the drive. As it stands today, there is no "auto sync" option within the dashboard between the built-in drives and USB connected ones. It can be set up using SSH and a cron job, but that will be messing aroud with the NAS at the base command line level and will probably invalidate your warranty if things go wrong. Have a look through the suggestions thread as this kind of question (sync'ing in general, not specifically NAS<>USB) comes up quite regularly and has probably been made there, where you can support it and comment yourself.

Auto Start Dependencies?

Hi,
I have a quick question for Sun Cluster 3.2.
I have a HAStoragePlus resource group, and a Logical Hostname resource group, which an NFS resource depends on the resources in both of those groups. How can I have it auto-start dependencies if all are offline?
Ie, everything is in offline state, and I say to start nfs-rg resource group...it will complain, instead of bringing up the required resources from the other groups. Is there a way to make it do that?
Thanks,
-Matt

Bringing this back from the dead.
Because of various reasons, we only got this set up about 2 or so weeks ago.
Here's my issue (mind you, it's getting late here, so please bear with me if I missed something obvious).
I have 2 resource groups:
zfs-rg:
storage-rs (HAStoragePlus)
zfs-rs (LogicalHostName)
nfs-rg:
nfs-rs (HA NFS)
I'm going to be adding a third rg:
samba-rg:
samba-rs (HA SAMBA)
Here's what I would like:
To be able to bring up or down the NFS and / or SAMBA services without affecting each other, and without affecting the storage and logical hostname. However, both the storage and logical hostname need to be on the current node in order to start either service.
Here's what I have:
clresource create -g nfs-rg -t SUNW.nfs \
-p Resource_dependencies=storage-rs,zfs-rs nfs-rs
clresource create -g zfs-rg -t SUNW.HAStoragePlus \
-p Zpools=HApool -p Resource_dependencies=zfs-rs storage-rs
/usr/cluster/bin/clresourcegroup create -p nodelist=zfs-2,zfs-1 zfs-rg
/usr/cluster/bin/clreslogicalhostname create -g zfs-rg -h zfs -N sc_ipmp0@zfs-2,sc_ipmp0@zfs-1 zfs-rs
/usr/cluster/bin/clresourcegroup online -emM zfs-rg
That's what was used to create everything, and I also set an affinity of zfs-rg:
RG_affinities: ++nfs-rg
Now, if zfs-rg is NOT running, it auto-starts upon trying to start nfs-rg (goal!).
BUT, it auto STOPS upon shutdown of nfs-rg. Not what I want.
Should it only be a nfs-rg? Am I doing this backwards? Will I have to add a + or +samba-rg to the zfs RG_affinities?
I looked at those blog entries, understood some of it, but I would think this is fairly straightforward, but I don't see any examples of it that I can find...
Thanks.
-Matt

Auto Start, with no theme

Hello Folks,
I am new here and found the FCP discussion to be very helpful, so.... here I am.
I have just updated to iLife 06' and have a question. I don't want a theme whatsoever. I want the DVD to be able to start when it is loaded into the DVD player without having to push menu buttons; Although I have completed the first task of dropping the clip into the auto start area, I do not know how to get rid of the theme. Please help.....
Thank you in advance, as this is probably a novice question to the talent on this discussion board.
CR

Thank you for all who replied! My question did get answered, and I also found another method...... DVD Studio Pro Thanks again.
Oh, by the way.. I do not see the area where I could put that these answers were helpful (they were).
CR
CR
PowerMac G5 Mac OS X (10.4.6)

Auto starting iTines on OS X tiiger server

Hi,
I'm running iTunes on my Tiger server under the Admin user. 99.9% of the time I don;t actually listen to music from the admin user, I use either the AppleTV downstairs or the mac mini in the back room.
question- I always have to log on as admin and start iTunes and have it displayed on the monitor before either the AppleTV or mac mini can talk to it. If i minimize iTunes on the server, i get a "cannot connect" message on either of the other two devices.
How can i auto start iTunes on the server when it boots up so that the other devices can talk to it without me having to login and fire it up explicitly?
TIA
alex

I'm not too familiar with server and I'm not sure if there's a way to auto login. you could look in system preferences. But I'm fairly sure under system preferences there is a "login items." You can add iTunes there and it will launch when you login.

Auto start emctl dbconsole on server reboots...

Hi All,
I am using Linux 5.3 Os and 10g (10.2.0.4) version of database.
I configured listener,db service and emctl service in auto start mode, means if my server gets rebooted then all these service should be up and running automatically.
this script is working fine but the issue is with "emctl" status.
after server reboots if I check emctl console through the url of "https://localhost:1158/em, then it is working .
but If I check manually this service through "emctl status dbconsole" it display as "not running", if I am going to start through "emctl start dbconsole" it display is already running.
now my question is: if this console is already up and running on machine reboots then why it disaply as "not running" when I check manually.
can any one suggest me?
Thanks,
Jigisha...

Hi,
Have a look at the following threads.
Autostart of Services
Re: Autostart of Services
Auto Start Oracle Services didn't work
Re: Auto Start Oracle Services didn't work
Regards,
Hussein

ITunes auto starting is getting old

I have gone through all the different threads, tried disk utility on the install disk. Completely removed iTunes from my hard drive using the support page from Apple then reinstalled iTunes and it is still starting on its own. At this point, I am seriously considering going back to iTunes 8, if that is even possible.
This is ridiculous. Apple should be ashamed of the issue and get it fixed but it doesn't even seem to be an issue they are aware of. It's like they don't even read their own forums here.

You are right JVL. But then I did ask a question, it just was phrased as a rant rather than a direct question.
So, to poster ta, I owe you an apology. I am on enough other forums that you would think I would be used to a response that didn't do anything to help me. But I guess I just got tired of it in general. Nothing against you, so please try to understand that I don't know you and have nothing against you personally. The anonymity of the internet leads many, including myself it would seem, to forget my manners. I apologize.
To answer ta's one true question, the starts are random. There is no rhyme nor reason to them. Sometimes I am doing nothing, sometimes I am surfing the net, sometimes I am doing data entry. So, no thread to connect the auto starts.
As to ta's comment that if there was an issue, he is sure Apple would be looking into it. Well, not really at least IMHO. I have found posts from the middle of last year, on this and other forums, and websites, talking about the same issue. I, and others, have submitted bug reports. So I am sure apple is aware of the issue. His comment, "why would they fix it?" is probably what set me off. My answer would be, they would fix it because it is broken and is a tarnish to Apples reputation. This company used the catchy PR phrase, "It just works". Well it doesn't "just work" anymore. More and more issues are arising. Have you looked at this particular discussion group lately? The number of issues with iTunes 9 is growing pretty quick. And the recent release of 9.0.3 doesn't seem to have fixed all that is wrong with iTunes.
As I said, iTunes is a "halo product" for Apple. It should just work and it doesn't, at least for me and a number of other folks.
Now, if somebody has some other things to try other than those that have been recommended, I would love to hear them and willing to give them a try.
And I will try my best to behave myself and not jump down your throat for no reason.

How to remove auto start of firefox plug in page

1) how to remove auto start of firefox plug in page. we do not want this site to open when openning firefox.
2) we proceeded with a few updates as requested, but firefox did not show the update once complete-still said need to update.

First of all your Flash plugin is out of date: Use Adobe's own page to test your version of the plug-in and to update it www.adobe.com/software/flash/about/ -- evidently the same information is not getting to the Mozilla plug-ins test. That might fix your problem if your home page uses Flash such as a news site.
Find updates for installed plugins at www.mozilla.com/plugincheck/mozilla.com/plugincheck
plugin page keeps coming up: see https://support.mozilla.com/en-US/questions/832793 particularly the replies near the end (different replies for different users).

My mouse pointer auto starts links and bookmarks without clicking on them . is there a way to stop this?

i am on a desktop pc .i use a perrixx usb keyboard and touchpad mouse .it looks like a laptop keyboard.# Question
my mouse pointer auto starts links and bookmarks without clicking on them . is there a way to stop this?

this should not be happening, maybe one of your addons is interfering?! - can you try running firefox in safemode or with all extensions disabled for a while and see if this behaviour is still there...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

HT4539 Is there any way to auto-start the Apple mail app?

Our company offers a 7/24 service where a user can leave a voice mail in our system and our mail server will send an urgent mail message to the iPhone of the employee on duty so it can be handled in a timely manner. The problem we are having is that if someone turns off their phone and starts it again (or if the user opens the running apps window and shuts down the mail app), the users are not getting those urgent emails.
While I understand having an auto-starting app would be undesirable, since every developer might start activating that feature, does Apple iOS6 have any way to tell the mail app to restart on iPhone boot? We have a few people using other smartphones with a competing O/S that sounds similar to "asteroid" ;-) and the mail appears to be always operational, even if you shut down the app.

And be sure to set up Notifications for mail so the phone will beep, buzz, flash, whatever when a message comes in.
One issue though (discussed elsewhere): the phone will only Notify once. If you didn't hear or see it, there won't be any further warning (unlike, say, Blackberry's flashing LED). You're gonna have to grab the phone and at least bring up the lock screen to see if there are any notifications queued up.

Error in Setting Auto Start for Oracle DB on Sun Solaris 10

Hi Gurus,
I am trying to set my DB to auto start when server reboots. Fllowing is my setting and the error. The issue is that the DB starts but LISTENER is not running...
Please please help me...
This is what I used for setting the auto start.
Thanks,
Jayant
SETTING:
=======
#!/sbin/sh
#Match ORACLE_HOME with whatever is in ~oracle/.profile!!!
ORACLE_HOME=<whatever is Orcale home is>
case $1 in
start)
su - oracle -c $ORACLE_HOME/bin/dbstart
su - oracle -c "$ORACLE_HOME/bin/lsnrctl start"
exit 0
stop)
su - oracle -c "$ORACLE_HOME/bin/lsnrctl stop"
su - oracle -c $ORACLE_HOME/bin/dbshut
esac
You're not done yet! You now have to dl
ln -s ../init.d/oracle /etc/rc3.d/S95oracle
ln -s ../init.d/oracle /etc/rc0.d/K15oracle
chmod 0755 /etc/init.d/oracle
ERROR:
======
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 02-DEC-2006 10:09:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
Solaris Error: 2: No such file or directory
root@zngds1gk #

Bingo.... I got it.
Thanks for your hint about the ./.profile. I was setting env variables in .cshrc file and my default shell for "oracle" user was sh.
Then I changed the default shell for oracle user to csh and viola..... it works.
root@zngds1gk # su - oracle
$ id
uid=100(oracle) gid=101(dba)
$ setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/sh
$ exit
root@zngds1gk # usermod -u 100 -s /bin/csh oracle
root@zngds1gk # su - oracle
zngds1gk%
zngds1gk% setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/csh
zngds1gk% cat .cshrc
umask 022
setenv ORACLE_BASE /space/oracle/app/oracle
setenv ORACLE_SID adm
setenv DISPLAY 47.102.212.108:0.0
setenv ORACLE_HOME /space/oracle/app/oracle/product/10.2.0/Db_2
setenv PATH /space/oracle/app/oracle/product/10.2.0/Db_2/bin:$PATH
And now it works...
Thanks.
~Jayant

How to switch off auto start of replication sp's.

hi,
I was checking my sqlserver's master database and found some body has swithched on auto start
of the following sps.
sp_MScleanupmergepublisher
sp_MSrepl_startup
May be some one was exprerimenting with replication.
pls tel me how can i switch them off?
i was hesitating to use this command
"sp_procoption 'spname', 'startup','off'"
, because i thought some on might have configured some thing else also for replication
or there might be some other way to swithch of these replication sp.
yours sincerely

You dont want to stop these.
These are automatically started when SQL Server starts provided you have replication configured.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Virtual keyboard auto starts in Windows 8.1 Pro

Even if the toolbar is turned off and the toolbar is locked, and under ease of use the checkbox is unchecked, this pesky icon keeps coming back. Is there a registry fix... users are complaining. thx!
Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

Hi,
Please know that it’s powered by a windows service called Touch keyboard and handwriting
pane. Stopping this service will be in result of disabling the on-screen keyboard.
Let’s try to disable the service related to the touch keyboard:
1. Press Win+R, type “services.msc“, and press Enter to bring up Services window.
2. Scroll down a bit until locate the service called Touch keyboard …
3. Double click it, first to stop it if it’s running, and then change the Startup type to either Manual or Disable to prevent it from auto-starting next time when computer starts.
Hope these could be helpful.
Kate Li
TechNet Community Support

Auto start LR on camera connect?

Hi
When using Bridge it would auto-start when I connected my camera to my Mac, LR doesn't seem to follow this behaviour. It will open the import dialogue if LR is already running when I connect the camera. Is this normal behaviour?
Secondly, I can't find an option to delete files from the camera after importing them to LR as there is in Bridge, have I missed it or is it not there?
Thanks

Configure in ImageCapture under Applications and check 'Show import dialog when a memory card is detected' under Import in Preferences.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D See LR Links list at http://donricklin.blogspot.com for related sites.

How to stop the auto-start of log reader agent (replication) right after my database is restored?

I have the scenario where the SQL server is restored (after migration).
This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
Thanks in advance - Jebah

Thanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
any other way to disable the jobs?
Steps I followed
Started with a Working publication and subscription
Disabled the jobs (log reader and distribution agents)
Backed up publisher, subscriber, distribution and msdb
Deleted the publication, subscription, publisher and subscriber
Restored the publisher, subscriber, distribution and msdb
Enabled the jobs and executed sp_replrestart
Observations/Issues
Replication does not work
Replication monitor does not show any error
Jobs are shows as enabled but not started in job monitor
Not able to start/stop the log reader and synchronization manually.
I am not sure if I have missed something while restoring the db.
Thanks in advance

Auto start up on airport question

Similar Messages

Maybe you are looking for