Auto Start Up when installing a usb memory stick into a usb port on the computer

Whenever I install a usb memory stick into my computer the Photoshop Album Starter Edition program begins running. How do I stop this from happening?
Phil Walden
[email protected]

Phil,
I am not running the Starter Edition, but actually another version. However, since no one else has responded I will post what I think will work for the Starter Edition.
Look in your System Tray at the bottom right of your monitor. You should see a Camera icon that when you move near it will say Adobe Photo Downloader. Right click on the camera icon and you will probably have a choice of Disable - click on it.
Barb O

Similar Messages

My computer and itunes do not see my iphone 'device' when I plug into either USB port on the computer. Have tried all the basic stuff suggested by 'support'. Any ideas?

My computer and itunes app do not see my iphone when I plug it into either USB port on the computer. The cable works because I can hear the iphone start charging off the computer. But there is no indication of the device in itunes or on my hard drive device list. Any ideas?

Have no idea what you mean by "basic stuff". Try EVERYTHING in this support article:
iPhone: Not recognized in iTunes for Mac OS X

My memory sticks are not being recognized by the computer...

I just installed 4 1gb sticks of memory in pairs and all of the same maker. I already had 2.5gb of memory installed. Once I turned on my computer and clicked the apple, it is showing that I only have the 2 gb of memory installed! Why is it not showing the other 4 gigs? It is saying those slots are empty and all 8 slots are occupied. I have a total of 6gbs but am only showing 2gb. I restarted my computer twice and keep getting the same result. All memory sticks are seated firmly in the slots as well.
Any suggestions?
I bought the memory sticks from a reliable vendor that sells Mac products.

I don't have the slightest idea of what you are talking about LOL! How do I do cold boot? How do I reset the nvram?
Another thing I noticed that was odd is that I took all memory out of the computer and installed just the 1gb sticks totaling 4gbs. Once I turned on the computer, my desktop screen would not show up on my screen. I got a solid blue screen instead. Once I removed all those sticks and replaced with the sticks previously installed my desktop screen returned! The new memory sticks are brand spanking new. Perhaps I could have had them installed incorrectly as I had them all in the same bank. I Will experiment again tomorrow.
Message was edited by: DVX100Shooter

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
I have upgraded the XP OS to SP3 with numerous updates;
Checked that the USB ports read Data sticks OK;
run a/v and malware programs, including Microsoft Safety Scanner;
checked that USB drivers are up to date;
uninstalled driver software and re-installed with software downloaded from HP;
carried out the procedures detailed in HP Support Forum 4022116
Error message the same.
This is for my elderly neighbour - help please!
This question was solved.
View Solution.

Hi @bodger50,
Welcome to the HP Forums!
I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
Hope this is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..

I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..

Thanks Eric for responding.
I checked and it does not appear in the Applications folder.
I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death).
One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
Thanks again.

Why does my nook open iphoto when i plug it in the usb port on the back of my imac running 10.6.8

I have downloaded Adobe Digital Editions and downloaded Overdrive from the public library. When I plug the Nook eReader in the USB port in the back of the iMac, iPhoto opens immediately. I know this is not a forum for Nook eReaders, but I have to start somewhere and figured since iPhoto is opening automatically, maybe someone can give me a clue.
thank you,

Most likely, because your Mac and iPhoto think that you have connected a camera or mass storage device that has images on it.
Not sure where to go from there, but I would start by looking at the setting in both iPhoto Preferences and Image Capture if I wanted iPhoto to ignore that device.

Can anyone explain when the USB port on the Express is really needed?

Back with another question!
My Airport Express is used only for my Canon printer (MP980), nothing else. I know, with hooking up my new Mac Mini, I'll get new drivers from Apple and will need to install some of the updated software from Canon... from what I've read, I won't try to use the disc that originally came with the printer.
Since I'll join my Airport network for printing after my older Mini is disconnected, when is there a need to use the USB port on the Express? I've read that it's used for connecting multiple computers to the network. But, I'm having some confusion with this. With my network up and running, I assume I would be able to use my old Mini and the new Mini on the same network, if I decided to unplug one and use the other one for a short time, since my network settings won't change. (I have but one monitor!). Is a USB connection to the printer only required if multiple computers are shared simultaneously with the printer via Airport Express?? I never really understood this completely. All I expect to do for a few months is occasionally unplug one Mini for the other as I save some files onto disc, etc.
Did I make sense?

JiminReno wrote:
Back with another question!
hello again, jim !
Since I'll join my Airport network for printing after my older Mini is disconnected, when is there a need to use the USB port on the Express?
you can hook up a printer (or a Keyspan remote to control iTunes). one aspect may be location. what if you want the printer in a different room or on a different floor in the house ?
I've read that it's used for connecting multiple computers to the network. But, I'm having some confusion with this. With my network up and running, I assume I would be able to use my old Mini and the new Mini on the same network, if I decided to unplug one and use the other one for a short time, since my network settings won't change. (I have but one monitor!).
yes, you can also share a printer connected to your mini with other client machines.
btw, you could use the +screen sharing+ feature to access and manage the screenless mini.
Is a USB connection to the printer only required if multiple computers are shared simultaneously with the printer via Airport Express??
no, all machines on your network could use a printer connected to either of your mini's or connected to the AX.

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

Recharging my iPod (3rd gen.) on my 2010 iMac goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found itth

Recharging my iPod shuffle (3rd gen.) on my 2009 iMac (OS 10.5.8) goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found it yet... What's the most efficient way of recharging?

Purchase a wall charger for it instead.
B-rock

When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit

When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?

madonnafromqld wrote:
When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?
Stop doing that.

When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall? Is it necessary on a Mac to do so? I come from the Windows world and am still in the learning curve on the Mac.

Correct. I have not installed ANY other software for anti-virus, etc. I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac. HTC will not synch with it otherwise. That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac. In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur.
Thanks.

Auto Start Up when installing a usb memory stick into a usb port on the computer

Similar Messages

Maybe you are looking for