AUTO START WHEN CONNECTED

AUTO START WHEN CONNECTED  In Backup, NAS to USB AUTO START WHEN CONNECTED: What does this  actually mean, in BACKUP of Dashboard? Will it auto sync every time a change takes place on the NAS?   Or must the USB be removed and reinserted into the USB port on the MCM?  

No, the clue's in the name It's a one-off single process, just triggered by the drive connection rather than by manual starting via the dashboard. When you connect the drive, it will trigger the backup, which will then proceed to the end and stop just as if you had manually started the backup. But at the end, if you want to backup again, you have to either manually restart it or disconnect and reconnect the drive. As it stands today, there is no "auto sync" option within the dashboard between the built-in drives and USB connected ones. It can be set up using SSH and a cron job, but that will be messing aroud with the NAS at the base command line level and will probably invalidate your warranty if things go wrong. Have a look through the suggestions thread as this kind of question (sync'ing in general, not specifically NAS<>USB) comes up quite regularly and has probably been made there, where you can support it and comment yourself.

Similar Messages

  • Iphone not auto syncing when connected

    i have the auto sync when connected option enabled on itunes, but when i plug my phone in, nothing happens.
    when i launch itunes, then dis- and reconnect the phone, it's fine and syncs everything. ideas? this just started happening.

    I've always had to open iTunes, then plug in phone for it to see it. I've never been able to just plug in my iPhone and watch iTunes get pulled up automatically like with my iPod. I just figured this is normal.

  • PSE 12 don't start when connecting camera

    Photodownlaoder don't start when connecting camera or sd card. Even when its started manually, the media won't get imported to harddisk.
    I'm using windows 8. Camera is tested on several computers with differnet fot software and funtions perfect. PSE 12 causes me trouble...

    One more information:
    this is my second iPhone that I use on the mac. I gave my first phone back to the dealer because
    of some cracks in the housing and I activate this second phone.
    Maybe this is the reason, that iTunes doesn´t react ?
    Can I control or delete the first iPhone (or must I do this ?)
    Where can I look after all my confirmed iPhones and iPods on my iTunes ?
    Many questions; I know....

  • Can I stop Safari from starting when connecting to a network on my iPad?

    Can I stop Safari from starting when connecting to a network on my iPad?
    On my home network the wi-fi connection happens automatically without opening Safari. But on my work network, when attempting to make a connection the iPad lets me enter my user name and password, but then tries to open the webpage www.apple.com, which is blocked by iPrism as entertainment, so I can't actually connect to that network. oes anyone know a fix for this problem?

    Can I stop Safari from starting when connecting to a network on my iPad?
    On my home network the wi-fi connection happens automatically without opening Safari. But on my work network, when attempting to make a connection the iPad lets me enter my user name and password, but then tries to open the webpage www.apple.com, which is blocked by iPrism as entertainment, so I can't actually connect to that network. oes anyone know a fix for this problem?

  • How to stop an app from auto starting when signing on?

    how to stop an app from auto starting when signing on?

    Several point :
    1st : do you select "auto relaunch" application when you close ML last time? don't do that next time
    2nd : in system preferences/Users and Groups look at applications that are selected for automatic opening. You can remove application. Tab called "Open At Login"
    3rd : have a look at /Library/LaunchDeamons/
    4th : buy Lingon
    Hope it can help

  • Is it possible to get Win 7 to auto start VPN connection?

    Hey all,
    Is it possible to get Windows 7 to auto start VPN connection? Or can you recommend a 3rd Party VPN client application?
    thanks

    To make a batch file. exe or cmd, you need to open a notepad. Go to Start-All Programs -Accessories and click on Notepad. In notepad type in
    rasphone -d ****** where is ****** a name of your VPN connection
    For example: your Vpn connection is called My VPN
    The command line will be:
    rasphone -d My VPN
    Then, save as .cmd or .bat for example. Vpn.cmd
    2. Then, Go to Start-All programs -Startup Folder. Click on it with a mouse right button and drag the Vpn.cmd file (file you've made in a notepad). Now, you should see it in startup folder.
    3 Right click on your Vpn connection, choose properties. Go to the ,,Option menu,, and Unmark (if marked) -prompt for user name and password, certificate etc. And press Ok.
    Restart the laptop. if everything is ok, you will see appearing Command prompt after Windows logging. It connects automatically and disappears.

  • How to turn off iTunes auto-start when iPhone connected?

    The option "Open iTunes when this iPhone is connected" is disabled (grayed out) in iTunes 10. The grayed-out check box is unchecked, yet iTunes starts every time I plug in my iPhone 3G. I would like to be able to plug in my phone without iTunes starting. Is there a way?

    Right. Un-checking the preference to prevent auto-sync re-enabled the auto-start option. Then I was able to check and un-check the auto-start option and re-check the prevent auto-sync preference. Now all seems well. Despite appearances (the un-checked option), the internal setting was in the wrong state and twiddling it seems to have set things right.
    What a boneheaded user interface, where items on widely separated parts of the UI affect each other invisibly.

  • How to stop music from auto starting when bluetooth ear piece connects.

    Does anyone know how to keep the music app from auto playing when I connect my blue tooth ear piece? It's driving me crazy because when I'm on a call and switch to Bluetooth the music starts playing. Any help would greatly be appreciated.
    Thanks,
    Gregg

    G,
    You might try downloading Bluetooth Connect & Stop Play from the playstore.
    I found this on the web and it may help:
    How to Stop Music Autoplay when Connected to Bluetooth in Car
    S.

  • Stop Napster Auto Starting when I connect my

    I wonder if anyone has any tips about this one...
    When I first connected my ZMP I accidentially chose "always start Napster to syncronise" from the auto start list.
    Normally I choose "don't do anything" but I chose Napster by accident this time.
    Anyway - normal autostart removal techniques dont work with the ZMP...
    Anyone any ideas how to stop this auto starting?
    cheers!
    dj_T

    When connecting your MicroPhoto, the "MTP icon" will appear in your taskbar briefly. Double-click that icon to bring back the "MTP Media Player" autostart box; you can then change the option. I suggest you choose "Take no action" and keep the "do this every time" option on; that means it won't autostart any application.
    You can also download the TweakUI application for WinXP from Microsoft and use it to change your player's autostart options.

  • Set up software does not start when connecting ipod for first time

    Hi,
    Just bought an ipod classic and appart from charging nothing happens when connecting it for the first time, I don't even see it in my finder window.
    Help please.
    Thanks.
    Mike.

    If your signature is correct in stating your computer is running 10.4.5, you need to run Software Update to get your system up to 10.4.10 or later.
    CG

  • How do I stop iTunes from auto-launching when connecting iPod.

    I have found one method of doing this set out below.
    You may want to stop iTunes from auto-launching whenever you plug in your iPod. To do this, open iTunes, and select the iPod in the left-hand Source window. Four buttons will then appear in the lower right-hand corner of the iTunes window. Click the left-most button with the iPod icon on it. This will bring up the iPod Preferences dialog. Uncheck the option labeled "Open iTunes when attached." You probably also want to prevent iTunes from trying to automatically synchronize your iPod when you connect by selecting the "Manually manage songs and playlists" option in the same Preferences dialog.
    I am unable to find the iPod icon in the left hand Source window, maybe if I connect my iPod an icon will appear, but I don't want to do this in case stuff is transferred between the iPod and Comp or vice versa.
    Sorry to be so long winded, but it was difficult to explain without being so.
    If any one knows of another way to do what I am trying to do
    Perhaps they would let me know.
    ASP   Windows XP Pro  

    okay. in a 7.0.x, we no longer get the "ipod options" icon when the ipod is plugged in and selected in the sourcelist (the area to the left of the iTunes screen). instead, the ipod options and preferences display for us in the main library screen.
    "Open iTunes when this ipod is connected" is kept down at the bottom of the "Summary" tab. (scroll down to the bottom of that tab to see everything under the "Options" heading.)
    "manually manage music" (or "manually manage music and videos" if you've got a video-capable ipod) is also kept down at the bottom of the "Summary" tab in the Options area.
    for a technique for connecting the ipod without automatically syncing (if you have an automatic syncing option set on the ipod already), and then changing the options to "manually manage music", see:
    How to keep iTunes from automatically updating your iPod
    unfortunately, that document is also written for itunes 6.0.x or earlier. so in your case the instructions under the "Now that you're logged in as the Guest user, it's time to get back to iTunes and your iPod:" section at steps 4, 5 and 6 should read:
    4. Scroll down to the bottom of the Summary Tab
    5. Check the "Manually manage music" checkbox.
    6. Click "Apply".

  • Auto Start When Device Plugged In

    Hello,
    Everytime I plug in a device that has pictures in it iPhoto automatically opens up. It has become quite annoying since purchasing the iPhone. How do I turn this automatic start up off?
    Thanks,
    Mark

    Mark,
    Open Image Capture which is located in your Applications Folder, and select Preferences>Camera: When a camera is connected, open: (Make Your Choice)
    ;~)

  • Stop programs from auto-opening when connecting iPod touch to PC

    I have a PC, and when I charge my iPod touch it wants to automatically open iPhoto, but cannot find it. So it asks which program I should use instead, so I stupidly chose Photoshop. Now every time I plug in my iPod touch, Photoshop automatically opens.
    Note: It's not about auto-syncing, I already have that disabled. The problem is I don't have a Mac, so I don't have iPhoto. It's trying to open iPhoto, but uses Photoshop instead.

    You may have inadvertently saved a picture from the web, if you hold the Home key it will snap a copy of the picture to your Touch. This is not the same as pictures you sync from iTunes. When you have a saved image on the Touch, that causes Windows to think it is a camera so it wants to open what it thinks is a related application.
    You can tell Windows to disable this, refer to this article:
    http://support.apple.com/kb/TS1857
    Another solution is to connect the Touch to your computer and go into My Computer. Normally you won't see your Touch listed, but if there is a picture saved to the Touch as described above, it will show up as a "drive". Select it an you'll probably see the image saved to the Touch, so you can delete it (or move it to your computer if you want it for some reason).

  • IPhoto Starts when connecting iPad; not iTunes

    Hi Folks,
    I've checked the settings in iTunes under "Summary/Options" in iTunes and the option is checked to start iTunes when the iPad is connected.
    However, when ever I connect my iPad to my iMac, iPhoto starts automagically instead.... I have manually start iTunes and even then it takes several seconds for iTunes to recognise that I've connected the iPad.
    Any and all assistance is greatly appreciated.
    Many thanks!
    Richard

    iPhoto opening automatically was annoying me, too, but I found a solution in this iPad discussion group. I don't know how to insert a link, but here is the address, the answer being the last posting.
    http://discussions.apple.com/thread.jspa?messageID=12600577&#12600577
    The solution has something to do with "ImageCapture", so you could search in this discussion group for that if the address above doesn't work. Or, search "iPhoto", and the answer is in a posting from November 17, 2010.

  • I phone auto starts when i plug into usb in car

    the I phone music starts playing when i just plug the phone into the USB port in the car.  How do i stop that.  is it a car software issue or an iphone issue?

    Hey there MORGRM,
    It sounds like your phone just starts playing music automatically every single time you connect it to the USB port in your vehicle. We should be able to troubleshoot the software on the phone to help you isolate it to the phone or the vehicle. Start by quitting the running apps on your phone with this article:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone  and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

Maybe you are looking for

  • How to block set of vendors for creating PO but allowing them to create RFQ

    Dear Experts, I want to block the set of vendors created by GS01 for creating Purchase order but allowing them for creating RFQ. I tried using XK05 but its blocked even vendor for creating RFQ. So is there any way to do so in my business practise ? I

  • Vendor Get Details

    Hii, Is there any Function Module or Bapi for getting details of a vendor. Other than this three functional module 1) read_lfa1 2) read_lfb1 3) vendor_read Regards Hiren K.Chitalia

  • Hold button non-functional

    Hi, I have a second-gen iPod that's never given me much trouble before. A few days ago, though, the hold button stuck. I can move it to "hold", but even if I physically move the button to the side, it won't come off hold. It prevents me from using th

  • If the trial version of apps are still active, do I have to reinstall apps after subscribing?

    I started using the trial version of a few apps just a few days before I ended up signing up for the year subscription, so whenever I go to use them, they still say "Tryout."  Do I have to reinstall the apps now that I have a subscription?

  • Major issues with buttons

    I'm having a bit of an issue right now.  In the image below, the blue buttons are supposed to be circles (you can see them in the middle of the line).  They ended up coming in with extra color on the sides that was not there in the original psd file.