Auto sync of Date & Time does not work on startup

Is there a reason why out of two entire labs of like 60 mac's that when restarted, a number of them will not look to sync up the date & time. I have every computer to do so, but for some odd reason, on a shutdown/restart, random computers will not sync up and ge the proper time.
The correct time is needed because these computers are running on with the AD Plugn, and AD will not allow computer user to login to the computer using AD user credentials if the time is not matched to the server. So what is happening, after a shutdown/restart, the computers can be off as much as a couple of mins, causing the users not able to login.
The only way right now to fix the issue is for me to log into the computer using my admin account, just open up the date/time preferences, and then with out doing anything, it will sync up to the correct time/date, and then I just restart the computer. Once restarted, users can login.
Any ideas ??
Tks.
Carter

Just received this from SAP:
17.04.2009 - 09:20:53 CET - Reply by SAP
Hi Henning
Thanks for contacting SAP and providing with most of the details required to analyze the issue.
As per note 1235408,this is a known issue with Flex2.
Visual Composer UI elements are displayed relative to the browser size and not relative to each other.
Solution: None; there is no relative layout available for the Flex 2 runtime.
Workaround: Choose the "Actual size" option in the "Fit contents" list in the Configure task panel of the UI elements.
Please refer to the note for workaround on the issue.
See mentioned note if this also applies to your problem.
Henning

Similar Messages

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Use member on data form does not work

Hello,
"Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
Who is resolve this problem?
Version hyperion: 11.1.2
Thanks

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

Droid Razr Maxx HD Data & SMS does NOT work in South Korea

If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

Quick time does not work on win7. What do I do?

quick time does not work on win7. What do I do?

Mine works fine with both my iPad and my iPod Touch. Been using it for two years. I recently replaced it with an Apple TV.

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

try a reset.
Hold the home & power buttons down simultaneously until you see the Apple logo appear.
Note: no data will be lost.

I can't restore the back up of my phone and when i try to sync my phone it does not work totally nether what should i do ?

i am trying to sync and back up my phone but it never works, so i tried to restore my back up but a message is telling me that an error occured so it does not work. It caus me a problem because i won't stop receive messages telling me that my iPhone as no space available even if i have deleted a lot of things.. help me please!

It might be the battery, it sure sounds as though it could be. What happens if you leave it to charge, does the charging symbol show, does the battery icon show full, part full or empty at any time?
If you check here; https://locate.apple.com/uk/en/ and enter your postcode in the Service box, you should see the options available to you from Apple and its Authorised Service Providers. They can advise you about the battery and you should be given the cost before you commit to spending your dosh!

Sync iPhone5 to Contacts does not work, but contacts to iPhone5, works..! Crazy..??

Hello all..!
I added a new contact to my iPhone 5, and after a day or two tried to find it from contacts. Resolt? NOWHERE..!!
I made all steps, before i write this question here. Tried almost(!) every help i found at sites. but didn't work.
Finally, I deleted the contact from my iPhone5, and added it at first at contacts. I made sync, and the new contact came to my phone..!
Please, what is wrong..??? This anomaly drives me crazy..!
iPhone5 --> Contacts (iMac) does not work.
Contacts (iMac) --> iPhone5 works..!
PS. Before "Mavericks" was Mountain Lion, without problem...
Thanks in advance

Well not sure about anyone else but finally spoke with "support" today.
First call I made I was told if I paid $79.00 I would receive assistance for a year.
They could fix my problem through my pc.
Well not paying.
Phone 1-800-APPLE and was told that because didn't pay for call display through
my provider it isn't going to work for me.
Seems they don't advise you of that when you are making a decision on buying a phone.
They at least could have put a *note saying function only works under specific conditions.
I would have checked that out first thing.
Lesson learned I guess. Now my provider supplies that option free for new plans but won't
apply it to mine. So much for customer service. This all within a couple of months.
Now if anyone has any information that would change what I was told please let me know.
Gayle

Exit button - Germany Personal data service does not work

Hi all,
We just upgraded our portal to EP7 Sp22 with 1.3 ESS Business Package and 603 XSS components in the back-end.
In testing Germany and all countries that use the Germany personal data service, the Exit button on all screens (Overview, Edit, Review and Save, Confirmation) does not work. The Exit button, when selected, keeps the user on the same screen.
I am not sure where the button is configured, but it should always take us back to the page from where the service was launched. So if I accessed through the Overview page or Personal Information page, and then click on the exit button, I should be taken back to one of those pages.
Where can we configure the exit button for the German Personal data service, so that it works and takes the user back to the page where they started.....?
Cheers!, Neeta

Hi,
The Germany personal data service is the only one where the exit button is not working. All other countries are testing fine.
Is it a customization issue on the back-end? The resource in spro for germany is configured with the pcd link of the german personal data i-view.
The other countries are also customized in the back-end with the pcd link of the appropriate i-view.
Regards, Neeta

Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

ICloud sync with MacBook Pro does not work

I've installed iOS 5, updated Lion to 10.7.2, marked Calendar and Contacts sync in System settings for iCloud on my Mac. However iCal and Address Book sync between iCloud and Mac (MacBook Pro) does not work though there is no problem in syncing between iCloud and iPhone. Whether I create new event or contact, change existing one or delete existing one in iCloud this change is not reflected on my Mac and vise versa. I could not find a solution in this site or in forums.

Yep, worked for me, too and now contacts and calendar seem to be syncing perfectly. We'll see if it lasts.
Thanks for your answer.

After upgrade date selection does not work in xml forms

Hi Experts,
since we upgrade the portal from 7.0.19 to 7.0.24 we have a problem with the timestamp in the xml forms in combination with IE7. When we click on the date selction button, the date screen appears and the form disappears. The only option we can choose is cancel and then the date selection screen disappears and the form is not comming back. Selecting a date en choose ok does not work. I tried with IE6 then it works fine. Before the upgrade it works fine with IE7.
How to solve this?
thanks in advance.
Vo.

I created a OSS message and the answer is : [Note 1491775 - XML Forms locked when closing browser window|https://websmp130.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1491775]
gr
Vo.

Request Scope for portlets? Sharing data tutorial does not work for portlet

I created 2 identical applications, one that was a regular JSF web app, and one a JSR168 portlet. By following the "Sharing Data Between Two Pages" tutorial, I can get this technique to work without a problem in the web app, but the portlet (deployed locally using the pluto server) does not work. What is the difference between a regular app and a portlet app?
This shows that portlets apparently handle scope much differently than other applications, so any information relating to this would be helpful to pass along.

Portlet Life Cycle Differences
A portlet page is the same as a web application page in the Creator 2 application
model with differences only in the page life cycle. To best understand the life
cycle differences, you must first understand how a portal interacts with a portlet.
This interaction between portals and portlets is defined by the JSR-168 Portlet
specification. Typically a portal display in the web browser shows multiple
portlets. That is, when the portal page is displayed, there are actually multiple
portlets displaying or rendering their content. The job of the portal is to manage
how these portlets are displayed. Internally, the portal is responsible for telling
each portlet two things:
1. When to display itself
2. If there has been an action, such as a button press, performed inside that
portlet.
When a portal wants portlets to display their contents, the portal sends a render
request to each portlet showing in the portal. If one of the portlets showing in the
portal has a button tied to an action request, when that button is pushed, the
portal fires an action request for that portlet. In addition, the portal generates a
render request for the portlet and all other portlets on the page. You should note
that the portal implementation fires both action and render requests for each
action method on a portlet showing in the portal. The implication of this
interaction means the portlet page being rendered can not make assumptions
about the state of the values to be shown. Unlike a normal web application page,
a portlet page can't assume that the page being rendered in the Render Response
phase is the same page that was built in Restore View. If a portlet wants to
maintain state across repeated render requests, the portlet must use the session
bean to store stateful information.
The main point to remember is a portlet page must always be prepared to render
it's values from scratch or session data. This implies you should never bind
portlet page UI components to page bean properties or request bean properties.
Also, you should never rely on page bean instance variables that might be set
during an action event.
Hope this helps.

UNION for Columns of CLOB data type does not work

Hi,
I have two tables Encounter & Encounter_History. They have same columns. One column is of type CLOB. My requirement is to retrieve all the distinct records from both the tables with order by a date column. But problem is, UNION does not work in case of CLOB data type.
I know it will work if I use UNION ALL, but it returns duplicate records.
Please give me suggestion, how to solve this problem.
For example: The following query does not work since column1 is a CLOB data type
select column1 from table1
union
select column1 from table2
Thanks

But for sufficiently small clobs you can try:
michaels> SELECT TO_CLOB ('abc') cl
FROM DUAL
UNION
SELECT TO_CLOB ('abc')
FROM DUAL
Error at line 1
ORA-00932: inconsistent datatypes: expected - got CLOB
michaels> SELECT TO_CHAR (TO_CLOB ('abc')) cl
FROM DUAL
UNION
SELECT TO_CHAR (TO_CLOB ('abc'))
FROM DUAL
CL
abc
1 row selected.

Auto sync of Date & Time does not work on startup

Similar Messages

Maybe you are looking for