Auto Time Menu Option Vanished

Hi there,
I recently purchased a new Lumia, when I booted it up there was an Auto-Time (on/off) option in the date&time settings menu...but now it has disappeared.
I did a factory reset of my phone but the option still isn't there, any thoughts?

Can't find any way to remove the option on the 800,920 or 1020 suggest you visit the person who supplied the phone or go to a Nokia Care point as the option should be available , all my phones are on the latest available software versions and have choice to turn auto update time on or off.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

How Can I deactivate CS3 in a machine where the Deactivate menu option is disabled all of the time?

We have a CS3 license. We lost the cd with the serial number. We want to deactivate the software in an old machine where it was registered to install it in a new machine, but the Deactivate menu option is disabled all of the time. How can we deactivate the software?

Use Web chat. Link at the bottom of this page:
Adobe ID, sign in, and account help

How to change options in Run time menu while labView was running

Hello Good Afternoon,
I m Using LabView 8.5.How to change the options in Run time menu for any control while Labview was running
Thanks
Jai
Jayavel
Solved!
Go to Solution.

Hi Jai,
Try the below attached VI and let me know if u still need some explanation.
Rgds,
Venky
Attachments:
Run Time Menu.zip ‏6 KB

Help menu options change all the time - repair install always shows

After installing Acrobat X, I noticed the Help menu options change all the time. The repair install option is always present and sometimes the deactivate option is present but grreyed-out, somtimes it is enabled and most of the time it doesn't even show up. I have the full version purchased from a major online retailer.

I should add the following: The Sound control panel will not even let me click on the "Show volume in Menu Bar" check box.
I just now installed the latest Brother control panel (Leopard compatible) and it DOES appear in the menu bar.

Auto time stamp formula help

Does anyone know how to make the auto time stamp to nit update. I figured out how to make a cell show the time whenever another cell is filled in. But I would like it not to update. Currently the cell I have updates whenever I do anything and I was hoping for it not to.
Formula is
=if(A1<1,hour(now()),minute(now()),second(now()),0)

Little clunky, but one option: Select a cell. In menu, click on Insert, then Date & Time. In the cell, double-click the date that was inserted and in the box that shows, pick a format that has a time. The current time will get inserted into the cell.
Another slightly less cumbersome option is to format 2 cells with Pop-up menus, one Pop-up to choose hour, then other Pop-up to choose minute. For example, if cell B2 has hour Pop-up and C2 has minute Pop-up, then D2 can have =TIME(B2,C2) and that would display your time, which can get used in other formulas.

N97, can't view menu options (wireless settings, m...

I tried to set WiFi, but I can't find this menu option, and other option are hidden too.
This option Menu > Settings and Connectivity >Wireless LAN.
Doesn't appear only can access to MENU > Settings and only show Profiles, Desk Settings, Phone Settings, Themes, Network Settings, Security Settings, and Reset Configuration. And no other option.
Other hand, memory is full(because I have a little MBs). 32GB drive not is considered or not is recognized.

sorry, but that is not an original nokia phone. it's a chinese fake, you should go where you bought it and ask for your money back, this is 100% a fake phone. more precisely, it's a nokia replica named KAIQI. the main proof is that "language set default" message. also, for that phone, these codes are also available (which, by the way, do not exist on nokia phones) :
*#06# (show IMEI)
*#8375# (Version info Summary)
*#3646633# (Engineer Mode)
*#66*# (Factory mode)
*#87# (Auto test)
*#33778# (Serial number)
*#523# (Main lcd-contrast)
##62# (infos)
*#21**11# (infos)
*#43# (infos)
*#0000# (Language set to default)
*#0044# (Language set to English)
*#0886# (Language set to traditional Chinese)
*#0034# (Language set to Spanish)
*#0048# (Language set to Polish)
*#0033# (Language set to French)
*#0049# (Language set to German)
*#0039# (Language set to Italian)
*#0066# (Language set to Thai)
*#0007# (Language set to Russian)
*#0351# (Language set to Portugese)
*#0084# (Language set to Viatmnese)
*#0385# (Language set to Croatien)
*#0972# (Language set to ??? error)
*#0966# (Language set to Arabic)
*#0086# (Language set to simplified chinese)
If these codes work on your phone too, then it's clearer than crystal clear that you have a fake phone. Nevertheless, I can assure you that you do not own a Nokia N97.
If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!

Nike+Ipod options vanished

Hi I have just come to use my Nike+iPod foot sensor with my 5th Gen 16G Ipod Nano and there is no menu option on the Ipod any longer to choose. The menu item is selected in settings\menu option but the menu refuses to appear. Also all Nike options have vanished from Itunes, which was updated yesterday to 9.0.0(15).
Any ideas why and how I can get the options back so that I can use the Nike sensor please?
Mark

{quote:title=Jeff Bryan wrote:}
The compatibility of the Nike kit with the nano has more to do with the nano being more suitable for running as it has flash memory and not a hard drive (no skipping or moving parts), and is lighter and smaller too. Much more suitable for activity sports. It has nothing to do with the Mac OS version.
Thank you for the reply, Jeff.
I appreciate your points and I don't mean to belabor the issue. I meant to say I purchased the iPod in late '06, which makes it just over a year old. Technically the Nike+ kit was available then, but it was basically brand new and I don't recall being aware of it.
To respond in support of the 5th gen ipod, personally I've run with it well over 500 miles, up to 13+ miles at a time, over steep hills and through heavy rain and skipping has not been an issue once. The same is true for a few other runners I know who use this model. While the nano is smaller, the 5th gen is a good size as well, and a marked improvement over older devices runners used happily for years, so it is far from a critical issue.
There's nothing you can do other than replace your 5th gen with a nano. There are no options to make your 5th gen work with the Nike kit.
I understand and appreciate Apple's making an iPod tailored to running, but logically activity sports would have been considered a key use from the first iPod, and the pre-nano models are suited to this very well also. I am a usually-happy and consistent Apple customer, am just once in awhile annoyed when good (and relatively new) products are not included for compatibility with new systems. It seems to me that the points you mention, while logical, are far from critical, and that a product less than 18 months old using the same OS could easily have been made compatible with the Nike kit.
Thank you again for the reply, I'll forward my thoughts to iPod feedback.

Save link as option vanished in firefox 17.0.So now not able to download mp3 files.Instead click on mp3 files starts playing in some black player in firefox

Save link as option vanished in firefox 17.0.So now not able to download mp3 files.Instead click on mp3 files starts playing in some black player in firefox.
Earlier i was able to download mp3 files by pressing on link for some time and menu popus up "Save link as" but after recent update that option is gone.
That option is desperately needed.
One more thing is MP3 file start playing in black player on firefox when i actually want to download them and then play it.
fix this issue ASAP.

I still have the "Save link as" option in my context menu with FF 17. Maybe something went wrong with the update?

"open vi reference" with run time menue

Hello,
I met some problems with "open vi reference" in labview.i can't parallel run this vi with the run time menue.i can't load the any vi then the run time menue has activation.(the "open vi reference" can run after the run time menue release.). it's means labview is serial running for this both function.but now i want to parallel running in the program.so would you give the some idear?

Now I see what you are talking about. What you are trying to do is expected behavior. If you click on the menu while any state is running that doesn't lock the front panel, then the menu will halt the VI execution until you choose a menu item.
You should check the option in the event to "Lock front panel until event case for this event completes" Then you will not be able to click on the system menu until tthe VI is launched and running. If you wire a True like I suggested before, then you will fall out of the case pretty quickly in non-hoghlight mode, and the user most likely will not notice. If the VI you are trying to open is quite large, it will take a little bit of time for LV to load the VI into memory.
In highlight-mode, you just have to wait for the event to process before you select the menu.
Message Edited by Matthew Kelton on 12-03-2007 10:56 PM
Attachments:
edit events.png ‏27 KB

When I don't have the BROWSER menu option turned on, the WINDOW menu options are un-accessable by mouse

First of all, I would like to clarify which "menu" is un-accessable.
I'm referring to the menu that regardless of which program, a user can access by either clicking ALT + SPACE or by clicking the top left corner of the window. I'm NOT referring to the FIREFOX menu options, those I am fine with.
Normally, I can just move my mouse to the top left corner and double click to close a program. I used to be able to do that too with firefox 3.6. However, due to the new design, when I click the top left corner, I get the orange Firefox drop down menu. This is because firefox, due to the new update, no longer has an independent window bar that is the norm across most programs. The only way I can get this independent menu bar is to enable the browser menu bar. This however, adds two entire layers of bars, which defeats one of the purposes of the update, to give more viewing space
The Chrome browser also has the tab row on top, however, it doesn't have the issue I brought up. When I click the top left corner of the window, the regular WINDOW menu options pop up.
The reason why this is important to me is due to the fact that I use two monitors. Normally, I can just move my cursor to the top right and close the window without looking for my right hand side monitor, and then double click the top left hand side of my left hand side monitor to close the window. This is because with a 2 monitor set up, the "X" close button is located inconvinently in the middle of my two screens, forcing me to aim for the tiny small red rectangle, which is why I prefere to double click the top left corner; I don't have to aim.
I have long been a loyal user of firefox. Browsers like Chrome and others have been out ranking firefox for a long time, mozilla is only playing catch up here...
While I am glad for the update - better speed due to JaegerMonkey, the added hardware acceleration, the tab groups, and more, if the window menu problem is not resolved soon, this update is going to force me to switch browsers.
I look forward to a fix, or response on how to resolve this issue.
Many thanks,
Still a firefox user... for now

it's possible but there is likely no need to do this. what exactly is wrong with your computer? a simple reinstall of snow leopard on top of your current system will cure many ills and will preserve your data and applications. and many problems can be solved without reinstalling at all.
but if you insist on doing a wipe and install boot from the SL install DVD and start disk utility from utilities menu at the top. erase your hard drive using the erase tab in disk utility. then quit disk utility and proceed with the install. and if you do reinstall I suggest you back up your data first. otherwise it will be completely wiped when you erase your hard drive. and you should always back up anyway.
Message was edited by: V.K.

Microsoft Office for Mac open recent File menu option causing AFP to crash

Hi all,
We have an Xserve running Mac OS X Server Leopard 10.5.8. The Xserve hosts three file shares for about 60 users. Our network is 99% Mac based running mostly 10.5.8 with a few 10.6.x. We have historically over the past several years had the AFP service become unreliable and crash frequently. Late last week the AFP service crashes constantly. The quick solution to getting it up and running is to delete the AFP.conf file in /etc.
We have troubleshot one cause of AFP crashing to the Open Recent... File menu option in Microsoft Office for Mac applications. That is, through some amount (haven't been able to narrow it down to how much) of opening documents on the share via the Open Recent menu the AFP service will crash.
Here's what's happening in the AppleFileServer .crash file:
Process: AppleFileServer [26065]
Path: /usr/sbin/AppleFileServer
Identifier: AppleFileServer
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2010-04-12 13:25:54.666 -0700
OS Version: Mac OS X Server 10.5.8 (9L34)
Report Version: 6
Anonymous UUID: 273147DD-D725-4DAB-B403-95391FF85FE1
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000015
Crashed Thread: XX
******** blah *********
Thread XX Crashed:
0 AppleFileServer 0x0004bc15 operator+(OSException&) + 103513
1 AppleFileServer 0x00064988 operator+(OSException&) + 205260
2 AppleFileServer 0x0006da4e operator+(OSException&) + 242322
3 AppleFileServer 0x000711f3 operator+(OSException&) + 256567
4 AppleFileServer 0x00071446 operator+(OSException&) + 257162
5 AppleFileServer 0x00076686 operator+(OSException&) + 278218
6 AppleFileServer 0x000790d7 operator+(OSException&) + 289051
7 AppleFileServer 0x0004560c operator+(OSException&) + 77392
8 AppleFileServer 0x00044269 operator+(OSException&) + 72365
9 AppleFileServer 0x00044343 operator+(OSException&) + 72583
10 libSystem.B.dylib 0x9587c155 pthreadstart + 321
11 libSystem.B.dylib 0x9587c012 thread_start + 34
This is followed by a lot of these entries in AppleFileService.log file:
IP xx.xx.xx.xx - - [12/Apr/2010:13:25:54 -0800] "Login username" 0 0 0
IP xx.xx.xx.xx - - [12/Apr/2010:13:25:54 -0800] "No matching key: username" 1271103954 1271103943 1
** - - [12/Apr/2010:13:26:15 -0800] "Mounted Volume VOLUME1" 0 0 0
** - - [12/Apr/2010:13:26:15 -0800] "Mounted Volume VOLUME2" 1 0 0
** - - [12/Apr/2010:13:26:15 -0800] "DiskArbStart -" 0 0 0
Our solution is to have all our users turn off the open recent option in Word, Excel, and PowerPoint. Not an ideal solution but it may get the AFP service running "good enough."
Has anyone had an experience like this before or can anyone duplicate the AFP service crashing when trying to open documents on a share via the open recent menu? Any other ideas?
Thanks

Update.
I have been able to consistently reproduce a problem where the AFP service will crash if a file that a user has an alias to is moved to a folder and the user is denied access to .
1. On your Mac create an alias to a file or folder, that you have access to, that is stored on a share served via AFP. The alias can be in the Places section of a Finder window, on the Desktop, or anywhere an alias can be created. Lets call what the alias points to the target.
2. Move the target to a folder on the AFP share and deny the user or group Read & Write access to that folder.
3. Try accessing the target via the alias created in step 1.
The AFP service should crash.
Can anyone reproduce this crash scenario too?

Both the 'delete' button and in the menu options do not delete messages but change them to unread. How can I remedy this?

The delete function seems to no longer work in Thunderbird. Both the 'delete' button and in the menu options do not delete messages but change them to unread.
I have tried to fix it by deleting the trash / deleted files as suggested in another thread but it made no difference. The delete key still works to delete things outside of Thunderbird (including here for example).
I have not uninstalled / reinstalled. I have rebooted a couple of times and it hasn't made any difference.
I did go through and delete a huge number of old emails a few days ago, but I have cleared out the Deleted folders and it made no difference.
All suggestions appreciated.

Right click on any of the other right panel headers in Slideshow module to open the context menu. You should be able to reactivate the Options panel from there.

How do I get the "jpeg to iPhoto" menu option in Snow Leopard?

in 10.5, there was a nifty little "jpeg to iphoto" option when opening photos. seems to have disappeared from menu options in 10.6. Anyone know a work around or if it's still there just somewhere else? It was one of my favorite things!

you are welcome! another option is to make a service using automator to import images to iphoto. it will be available in the right-click menu and might be useful for importing more than one file at a time. and of course you can always just drag the files to the iphoto icon in the dock.

The menu options won't highlight.

i'm done with everything, im about to burn but the menu options wont highlight. im making a slideshow for my friends because we went camping and i have pictures lol :P
Message was edited by: isaac556

Hi isaac556
Welcome to Apple discussions. I see this is your very first post here on iDvd forums. As already stated, most of us can't read minds. But I'll go ahead and assume you are trying to make the slide show within iDvd and not elsewhere like iMovie for example (where you might have better luck if you haven't already tried that). iMovie is a very viable option (no 99 photo limits) as are other apps (Roxio /Fotomagico, Photo to Movie) you'll find mentioned throughout this forum. However most are 3rd party and thus are not free. So I'll try and stay with those you likely already have ... hence the iMovie recommendation.
If iDvd's slideshow function is not performing as expected (not hi-lighting the button/s as expected) and you haven't exceeded 99 images and have played by all the other rules mention in the Help Menu; then it's time to disposed of iDvd's plist
Go to your HOME folder (the one that looks like a house) > Library > Preferences
over to:
com.apple.iDvd.plist
and get rid of of it by dragging and dropping to the trash ...
followed by a complete restart of your mac. Thereafter you need to repair permissions from apple's disc utility (within applications > Utilities > Disc Utility), and again restart the app.
Good luck on this and feel free to keep us posted.
Message was edited by: SDMacuser

How to enable commenting for Adobe Reader users--missing menu option?

According to the help file, I can enable commenting in Acrobat Pro X so that Adobe Reader users can use annotation and commenting tools. The help file says:
"In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.:"
However, all is see on my menubar is:
According to the help file, I *should* see something like the following:
I have uninstalled and reinstalled Acrobat Pro X. I have installed Acrobat Pro X on a machine that has never had Acrobat Pro installed on it. Each time I see only the shortened version of menu options.
So, why do I only see File, Edit, View, Window and Help? Where are the other menu items, such as Comments, Forms, Tools, etc? Is there something I need to do to enable them?

*Thank you*. That worked. How odd that the help file was out-of-date with my version of Acrobat. Thanks you again!

Auto Time Menu Option Vanished

Similar Messages

Maybe you are looking for