Auto trace, multiple layers?

Hi
I have auto trace'd a illustration, but i would like to create a "black Layer" and "white Layer"
I am unable to select certan parts of the final trace, just the entire trace
Any help wpould be appreciated, Thanks

Click Expand in the command bar.

Similar Messages

How to customize Auto-trace selection over multiple frames?

Hi all,
I'm working on an After Effects CS5 project that involves a lot of compositing and my material is all in high-contrast black and white. I'm looking for a way to mask individual parts of a particular clip: e.g. I have a 10 second clip with two people standing in it, one on the right and one on the left. I'd like to isolate the person on the right and hide everything else, including the background and person on the left.
I used Auto-trace to quickly find the outlines of my image and it works great since my picture is such high-contrast. Only thing is, I'm not sure how to remove the person on the left from the auto-trace selection.
I have "work area" selected in my Auto-trace options, which is amazing as it makes the Auto-trace selection span over my entire 10 second clip (as opposed to me needing to apply it frame-by-frame), but now the problem lies in removing person on the left from the entire 10 second clip. I went to the beginning of the new layer (I have the "Apply to new layer" box checked in my Auto-trace options), used the "Delete Vertex Tool" (the pen tool with a minus sign on it), and removed the selection of the person on the left, but the selection exists in all the frames following it (i.e. 9 seconds and 29 frames), and only gets removed from the particular frame I was working on.
Is there any way to get AE to remove the selection over the span of the clip as opposed to only the individual frame I'm working on?
BTW, I'm not married to this method. If anyone has a better method I could use, I'm all ears, although I would like to see this through if possible.
Any help is much appreciated!
Thanks
Mike

Thanks for the tips. I checked out the super tight junk matte tutorial, and this works well for green screened content but the issue I have is that my image is completely duotone - i.e. I only have black and white in the image. See here for an example:
http://mysite.verizon.net/vze15wlb3/IOBG012.jpg
So my challenge is trying to get certain portions of the image excluded, and I'm having a hard time doing this using rotobrush. In this case, I want to exclude the face on the left while auto-tracing or somehow rotobrushing the face on the right. Any other suggestions? I was hoping for an easier way short of applying tons of junk mattes and precomping.

Expression / Linked slider for controlling multiple layers

I'm trying to create a slideshow with many many layers. Image sizes vary across the board.
I'd like to line them all up and set some Ken Burns keyframes on the scale before I use keyframe assistant to sequence them.
Is there anyway I can control these keyframes with relative values? So that I scale multiple layers in the same manner although they have different concrete values?

You can set up an expression that automatically starts a scale and a move on an image, tie variables to Effects Control Sliders and save the whole set as an Animation preset. That way you can drop all your photos in a time line, Scale and position the layer in it's final resting place, then set an out point for each layer, then elect them all and apply an animation preset and sequence the layers. EZ as pie, once you write the expression.
To setup an auto scale expression you simply divide the height of the composition by the height of the current layer and multiply by 100. Adding an expression Control Checkbox to layer and naming it AutoScale will give you the ability to turn auto scaling of the layer on or off. Here's the expression:
h=height;
ch = thisComp.height;
s = ch/h * 100;
if (effect("AutoScale")("Checkbox") == 1) {
ns = s}
else
ns = value[0];
[ns, ns, 100]
Use caution because this will scale a layer up to fill the comp height as well as scale a layer down. Also take note that if your layer is scaled down more than 50% you are probably not getting the best results in terms of image clarity or render times. Ideally any 2d footage layer in your composition should be some where close to 100% scale at some point in the composition. If the layer is 3D then the distance between the camera and the 3D layer should be approximately equal to the zoom value at some point in the composition with the layer at 100% scale.
Just for fun, try this Effects Preset that I have in my collection. Make the layers 3D, position them at their ending position, set an out point, then apply the animation preset. The layer will fade in and move to the ending position then fade out. You have a point control to control the starting point and a switch to make the layer fit the comp vertically. You can control the fade in - fade out time in frames, set easing, setup rotation, and there is a setup switch to kill opacity changes so you can see the starting and ending setup for your layers.
3DSlideshow.ffx
It's a good idea to start building your own animation presets library so you can have access to complex expressions with a click or two. I have more than 200 in mine. I pointed an alias to a dropbox account so I can have access to all my presets anywhere I am in the world.

MULTIPLE place image import...& "save as.." multiple layers to multipage PDF

Hello,
just some suggestions I`d like to see to speed up my set up and output..
i`d like to import multiple placed images into illustrator CS4. So open dialogue box place, and multiple select images for placing.
regards output save as...
Can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each layer... would be a huge time saver for me.I create different artworks on different layers..
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..i`d like to do this right in the illustrator "save for PDF" dialogue box. Adding something in the Save for PDF output dialogue box to save layers to one PDF as multiple pages would be a helpful time saver..
I`d also like to be able to CTRL click multiple layers and go " save as..." only those layers get saved out...

, bridge -FILE/PLACE into ai, goes to separate layers in AI as placed.
in PS, bridge/tools/ps/load files into ps layers.. CS4.
just using right click in explorer on individual PDF docs from layers saved from PS to combine to PDF. but cannot output multiple pds from layers in AI in CS4.

How to multiple layers in the MAP web item?

Hi experts,
I'm working on a demo with BWGIS. I encounter several problems with the MAP web item.
My demo:
QA results visualized on global (region object - e.g. Europe, Asia), country (country object) and plant level. Use geo-drilldown to navigate into the lower layers functionality to get from the global view to the countries within one region and plants within one country.
My settings:
Region is a static geo-characteristic. For region I used the cont200.shp file. Also country is a static geo-characteristic, here I used cntry200.shp. For test I used ARCGIS to draw (points) some example plants in the country shape file. I uploaded this shape file to the plant object (also static).
My success:
I'm able to display the QA results in a separate global or country view within the 3.x Web template.
My problems:
A) The map web item in 7.0 does not display any data: it looks like no link can be made between the query result and graphic although we installed the latest IGS.
B) I'm not able to drilldown from a global view to the countries within one region (doubleclick on one region in global view) within the 3.x Analyzer and 3.x Web template.
My first question is about the concept of BWGIS:
1) I want to use geo-drilldown (double-click) to navigate to the lower layers. For example in the global view I see only the QA result per region (shape file of region object) -> doubleclick on Europe, I expect to zoom in to Europe and see the QA results for all the countries in Europe (shape file of country object). How do I modell this in the web application designer?
alt. 1a: 1 map 1 layer - 1 dataprovider - underneath 1 query with region and country in the row is not allowed, so how to navigate between the two geo-relevant objects?
alt. 1b: 1 map - 2 layers (2 shape files) - 2 dataproviders - 2 queries, one with QA result per region and one per country -> in that case both will be displayed at the same time, is not what I want. How to navigate between the two layers?
alt. other ?
2) I know how to make maps with multiple layers in ARCGIS, but do I need this for BWGIS, because one layer is one shape file? So do multiple layers in the map web item correspond to multiple layers in a ESRI ArcMap Document.
More specific questions:
3) Is there a lot of experience with the map web item in 7.0, documentation and working examples? Are there known problems (I can't find anything in sap notes). Is it better to still use the 3.5 Web Application Designer for this?
4) There is very little information on SAP help, SDN and other forums about BEx Map and moreover the MAP web item. Does anyone have more documentation for me?
Thanks in advance.
With kind regards,
Rick Stoll

Hi Rick,
I am working on the same topic. I am strongly interessted in solutions to your open questions, that you pulled forward in the past.
Did you make any progress?
Thanks in advance and regards
Marcus

How to change blending mode on multiple layers at the same time

I'm using CS5. I have a document with about 70 layers. I would like to change the blending mode to "lighten" for each layer. Is there an easy way to do this?

Photoshop doesn't allow multiple layer editing. That's why the styles are grayed out. Only 1 layer at a time.
What version are you talking about?
CS5 definitely let’s one apply a Style to multiple Layers.
rfcommagere, I don’t know how to make it much clearer:
• set the Blending Mode on one Layer
• with that Layer selected create a Style with »Include Layer Blending Options« checked
• select all other Layers that should have that Blending Mode
• click the Style in the Styles Panel

How to share the same mask across multiple layers?

Say one needs multiple layers, one above another, to share the same layer mask. Is there any smart way to tell all those layers they have to use the same mask? As opposed to copying the same mask into all layers. The latter approach has the disadvantage that, when you need to change the mask, you need to copy it again into all layers that must share it.
Thank you.

Put the Layers in a Set and apply the mask to that.

How do I create holes through multiple layers?

I'd like to use boxes to punch holes into the layered artwork below them. I want the result to look exactly like this image, but with the white boxes being transparent holes.
This seems so simple, but I can't find any combination of layers/pathfinder tools/compound shapes/or clipping masks that will produce this result. No matter what, I end up losing part of the artwork (usually the topo lines and the black bar).
What am I missing??
Thanks in advance for any advice.

mirvlem,
You may:
1) Select the boxes to become holes and Object>Group (if nort already);
2) Select everything and in the Transparence palette flyout tick Make Opacity Mask with Clip unticked and Invert mask ticked.
There seems to be no need for multiple layers, but the Opacity mask punches through them all right.

Can no longer find or use Auto Trace in Illustrator CS11

My system was recently "upgraded" to Windows 7. Now I can no longer find the Auto Trace option in Illustrator CS 11. I see it in the preferences but cannot access it through a menu. I see "expand" but it's gray and not available. Any suggestions?

screen-naim,
You should have Auto Trace in CS, also known as 11. It was replaced by Live Trace in CS2.
I believe it is bundled with the Blend Tool in the Toolbox (ClickHold to see it fly out).

Photoshop CC 14.1 editing paths on multiple layers disabled?

Has editing paths on multiple layers with the direct selection tool been disabled in Photoshop CC 14.1? I can't seem to figure out how to do it now, shift- or command-clicking doesn't do anything. In fact, I can't even click to select individual paths on different layers, something that Photoshop has had forever.
While it was at times problematic the way it was in 14.0 (always selecting multiple layers and having to go into isolation mode to edit just one), there were times when it was useful to edit multiple layers, or even just click between layers with the direct selection tool.
I've seen this documentation on the site, but I'm not sure it's very helpful. Can someone give me some assistance?
Also, what is the custom keyboard shortcut for entering/exiting isolation mode? It is mentioned in the above image, but what actually is it?

You can still work with paths the way you could in 14.0 -- just choose the All Layers mode in the Path Selection tool or Direct Selection tool options bar. We added the Active Layers mode for users who prefer to isolate which paths can be selected based on which layers they have already selected in the Layers panel.
To clarify:
-Active Layers mode: Clicking or dragging on the canvas with the vector selection tools will not affect which layers are selected in the Layers panel. Double-click to enter isolation mode is disabled.
-All Layers mode: Works just like in 14.0 -- clicking or dragging on the canvas with the vector selection tools can change which layers are selected in the Layers panel. Double-click to enter isolation mode is enabled.
If you find yourself switching between these two modes a lot, you can add a custom keyboard shortcut that will toggle which mode is selected. In the Keyboard Shortcuts dialog, choose Shortcuts For: Tools and scroll down to the Direct Selection Mode Toggle option. Add your new keyboard shortcut here.
As for your question about isolation mode keyboard shortcuts, this just means that you can assign a custom keyboard shortcut to this command as well (Select > Isolate Layers).

In Elements 12 how do I auto fix multiple pictures, then send them back to the organizer?

In Elements 12 how do I auto fix multiple pictures, then send them back to the organizer?

Hi,
You can try the batch processing, refer the below link
http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6

Feature Request, option to relink all unlinked layer masks when transforming multiple layers at once.

As a professional PS artist who works on files with sometimes hundreds of layers, I often need to transform many layers or groups at once. It is a nightmare to find that after the transformation, a mask did not get included in the transformation, (especially when the file is many gigs large, and the transformation took 15 minutes). Sometimes, a mask is accidentally unlinked, but more commonly I unlink it temporarily, but forget to relink it. There is currently no way that I'm aware of to find these pesky unlinked layers, other than going through every single one. What would work great is to have a popup asking if you would like to relink all unlinked layers, whenever you're transforming multiple layers that include one or more unlinked masks. Or else have an option in the layers palette to either select or relink all unlinked layered masks. Hope this makes sense. Cheers!

Michael,
It looks like you are right! Thank you for your help.
I still have a small concern. I looked at the documentation and it reads,
"The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
Cheers!
John

Custom keyboard shortcuts and editing multiple layers in Flash CS4

Hi, all -
CS3 -> CS4 transition newb here who's getting increasingly frustrated with the new motion tweens; however, for this project, I'm working in a 3D space and require using them, so I'm dealing with this bit by painful bit. I found the tip about Split Motion, but first question: how do you apply Split Motion across several layers at the same time? I have six different tweens, and in CS3, I used to be able to shift-click or click-drag across frames and apply a command to all of them (for example, hit F5 to add frames), but Split Motion is requiring me to right-click on each and every layer. This is really laborious, and I worry about future animations that might be more complex.
Similarly, I tend to add custom keyboard shortcuts to each of my Flash versions for commands I use frequently and don't want to right-click a menu for (such as "add motion tween") - however, I can't seem to find where to create a custom shortcut for either that, or Split Motion.
Any and all help would be appreciated as I muddle through this. Honestly, guys, I WANT to like the new version and there's so many added features, but it's hampering my workflow so bad I want to pummel it with sticks.

Hey there,
I definitely hear you about Split Motion. There is an enhancement request for supporting multiple layers, and adding it as a keyboard shortcut. The first one is tricky, but the second one is not. I think there was hope that splitting motions wouldn't be necessary much (especially since you have to be careful when doing so when eases are involved), which is why the eventual need for more functionality related to split motion was realized a bit late in the schedule.
Now regarding other operations, such as you mentioned F5 to insert frames - that and other operations (inserting certain types of property keyframes, F6, and so on) work just fine.
You can apply a shortcut to Create Motion Tween in the custom keyboard shortcut dialog. Not all operations in the program are available though (most context menu items aren't), which is why unfortunately why we don't see Split Motion yet.
It might be possible to avoid Split Motion though with another workflow. What are you using the feature for? Just curious in case I can help.
Jen.

Digital Signature - Auto-Populate Multiple Signature Fields

Hello,
I am in the process of testing digital signatures with PDFs. I have a Topaz Signature Pad working in conjunction with Acrobat 9 and Reader 9 so that I can insert digital signatures with no problems.
We are wanting to take this a step further and streamline a particular business process. Does anyone know of a way to have a digital signature auto-populate multiple designated signature fields? We have about 15 documents that require an employee signature in multiple places and rather than having someone sign a document over and over again, we'd like the option for a single signature that auto-fills in all the required signature fields.
This doesn't necessarily have to work with Topaz Signature Pads. I am completely open to other suggestions, products or methodologies for making this work as long as something can be automated to auto-fill multiple signature fields.
Many thanks to the forum!
Regards,
Geoff

Hi Geoff,
Maybe there is no need to re-inent the wheel. Auto-population of forms is a feature of SignDoc - se http://www.signplus.com/en/products/signdoc/features.php#Form_Preparation
Auto-filling of forms is requirement which can be achieved through various processes.
In combination with Adobe LiveCycle this is executed in the case study of Adobe/SOFTPRO.
http://blogs.adobe.com/security/2010/01/adobe_secured_customer_showcas_8.html
http://www.adobe.com/cfusion/showcase/index.cfm?event=casestudydetail&casestudyid=762388&l oc=en_us
However there are also other ways to move forward depending on the envrionment you are using.
If you are based in the US you may want to get in touch with Rod Vesling SOFTPROs E-Signature Specialist, based in CA near LA, for a chat. His office phone is 805 435 1214. His email is [email protected]
Depoending on the deice of Topaz you are usinfg you may start right away as quite a decent number of Topaz tablets are supported by SignDoc. However the best idea might be to give Rod a ring and idscus your business requirements in detail.
Kind regards
Joerg

Convert multiple layers into separate smart objects

I have multiple layers in a document that I want to make into separate smart objects.
If I select them and choose "convert to smart object" in the Layers Panel fly out, it flattens the layers into 1 smart object.
Can it be done, or do I need to make each layer a smart object one at a time.
OR... let me back up
I have several files in Bridge, I want to "load into Photoshop layers" using the TOOLS > Batch Command BUT have each file load as a smart object.
Either way would be great!

While these don't use the batch command, take a look at
from within photoshop, File>Scripts>Load Files into Stack.
For bridge try Dr. Browns Services:
http://www.russellbrown.com/scripts.html
If you have cs5, you can drag files from mini bridge into an existing
photoshop document, for smart object layers, provided you have
your preferences under general to place or drag raster images as smart objects.
MTSTUNER

Auto trace, multiple layers?

Similar Messages

Maybe you are looking for