Auto tunning plug recommendation for Logic

anyone have experience with a really good auto tunning plug..for vocals.I am pretty decent vocalist..but the years are taking it's toll. I have tried the one in Logic and it's ok but I'd like to know if someone can recommend something better for Logic they use or have used. Thanks

The term "Auto Tune" comes from the Antares plug-in of the same name. It has become analogous with the term "Pitch correction", which is actually a better description.
The "auto" part comes from a mode within the Antares plug-in that will pitch correct on the fly, or automatically. If a singer is really close, and just has a few small problem spots, this mode can work wonders. But if a vocal performance is WAY off, you need to result to graphic mode, where you have visual feedback to work with.
I've used them all, but Melodyne gets my vote as the best available.

Similar Messages

  • Auto tune plug-ins

    Hey everyone!
    Just wondering if anyone knows of any auto tune plug-ins I could use through GB for vocals?
    Cheers
    Righini

    you can use GB's built in Enhance Tuning, and of course there's Auto-Tune from Antares.

  • Plug-Ins for Logic Express 9

    Does anyone know of any sites where one can download plug-ins for Logic Express 9 (either for free or for purchase)? Also, I know that one can use sound fonts (.au) with GarageBand --do these also work in Logic Express 9 and, if so, do they need to be reinstalled for Logic or do both programs read the same source files?
    Thank you!

    To piggy back on previous posts, I would definitely pursue Native Instruments. While some may of the plug-ins may seem a bit on the pricey side, you will certainly get your money's worth. If you're looking for strong lead and bass sounds, I would encourage you to check out Massiv - it's my go-to plug-in of choice. I believe there is even a limited demo to try if you want to play around before purchasing.
    Hope this helps.
    Message was edited by: lostinthesound (spelling correction)

  • Is there a plug-in for Logic Pro that records all live output to disk?

    Hi, I noticed Digidesign have a plug in called Flashback which literally records up to 15 minutes of the master audio output for all those 'happy accidents' or when you miss recording a genius solo because it was just a run-through. Is there anything like this for Logic? thanks, Chris

    right click on transport bar, select "Customize Transport Bar ...", select "Capture Recording" checkbox.
    If you're in cycle mode and playing on an input enabled track, this button will capture the last time through the cycle and place it on the timeline as if you'd been recording with the little red light on. Works for audio and midi.

  • Best Transpose plug in for Logic???

    Anyone know the best "transpose" plug in for Mac/Logic/??
    I mean a general Transpose plug in that does the most basic job of pitching audio up and down like a sampler, in semitones - but in the arrange window of logic/protools?
    I dont mean any elastique/stretching at same pitch that every DAW does nowadays - I mean a simple plug in to go :
    1,2, +3 up in pitch and sound gets shorter and higher
    -1, -2, -3 down and sound gets lower in pitch and longer/deeper...
    This is a bit like Ableton does when the warping is off, and also as Acid Pro does with "one-shot" samples..
    I find it easier in the arrange window instead of loading up a sampler.. but Im on the Mac (so no Acid Pro) and want to use inLogic
    I cant find anything that does this without "warbling/strtching the audio? I have tried Elastic time with Varispeed which has no semitones value, and Serato which didnt do this...
    Does waves soundshifter do this? and can it be demo'd?

    oops.. I added some additional info about Apple Loops in the previous post
    All new audio files that has been recorded with Logic allow you to use transpose function
    About Audio streaching method used in Logic search on th Logic manual chapter 23 page 525
    Also search for Time Machine
    it works fine!

  • Compatible Plug-ins for Logic Pro X?

    Hello Apple Community,
         I am new to Logic Pro X, I am coming from Pro Tools. The only reason why I have purchased Logic Pro is for composing music. I love Pro Tools only for recording audio, mixing, and mastering. I was wondering if anyone knew if the following Plug-in companies are compatible with Logic Pro X. Waves, iZotope, Native Instruments Komplete 9, Universal Audio (UAD).
         If these are not compatible, if you could let me know what plug-in companies are it would be very much appreciated.
         Thanks!

    They all make OS X compatible plugins. Logic uses the AU (Audio Unit) format, so VST plugins won't work. For UAD I believe you need extra hardware.

  • How to I get the Keyboard Plug In for Logic that includes the B3 Hammond Organ?

    I just downloaded Logic Pro X, along with all the additonal instruments, but I can't seem to find any of the keyboard plug ins that I thought came with it. I'm really interrested in the B3 Hammond Organ plug in. How to do I get that? Can anyone help me?
    Thank you!

    Search for Organ patches, the instrument used is named "Vintage B3 Organ"

  • NI Guitar Rig Pro 4 as a plug -n for Logic Studio/Garageband?

    Hi,
    I have Logic 9 and use AmpDesigner/Pboard via an Apogee GIO for both my guitar and bass - Sounds great. However I've just been goofin around with a mate on his Macbook Pro using Native Instruments Guitar Rig 4 with their Control 3 foot pedal - ummm don't wanna say this but that sounds great too! I really like the interface and patch library and some of the presets did sound bloody great to me.
    So my question is ...
    Is it possible to use NI Guitar Rig v4 in Logic 9 studio/mainstage? as a plugin? maybe mix and match Amp Designer and or Guitar Rig in one song? I'm sure I read somewhere that you could use non Apple plugins in Garageband.
    Anyhow
    Keep on Pluckin'

    dynapop wrote:
    Wow that was quick - thanks!
    AU (Audio Unit) plugins eh? - I'll check that out in help documentation ...
    http://www.hitsquad.com/smm/cat/PLUGINS_AU/
    http://www.wikirecording.org/AGuide_to_FreePlugins
    http://www.mhc.se/software/plugins/tips.php
    Next problem is -
    how do I explain the missing 300 euros from the house keeping to the missus!?
    Just quit the sitcom...

  • New Kontact 5 player and plug-in for Logic Pro 9.

    Any hints on how to get Logic to recognize it and install as AU plug-in ?

    A redo of the upgrade installation, double checked the AU file format; no help... got mad and shut it down. It was there when I restarted and brought up Logic 9 fresh. The opening splash was longer and I could it it recognize and load the plug-in.

  • Plug Ins for logic 8

    hi guys..i got a question..i am currently running lp7.2 but am about to upgrade..i got lots of virtual instrument plug ins that work on 10.4.4...my question is when i upgrade into leopard and lp 8..will these instruments work?..and the second question is if i stayed in 10.4.9 and upgrade would these plug ins work?..thank u in advance..one last question advance accoustic system has a virtual guitar strumming and picking program has anyone used it and will it work too?

    Leopard: I am afraid you would have to check with the makers of those VI's.
    Almost all of them have Leopard versions, some of them are both tiger and leopard compatible.
    If you upgrade to Tiger .11, everyhing should keep working just fine. No reinstalls necessary - I say this with 98.3 % certainty.
    regards, Erik.

  • Some software instruments are not working when midi controller is plugged in for logic pro x

    So I have made a track and I have been using my midi controller. Some instruments work when i record on the track. But if i change to some other instrument i.e. the vintage organs, then it won't work. I have bypassed all control surfaces and it still hasn't worked.

    Some of the vintage organ patches use different Midi channels.....other than Chan 1 for other registers... Example Chan 3 might be used for the pedals... and Chan 2 might be used for the lower keyboard/register of the organ...
    Check your keyboard to see what Midi channel it is actually transmitting on and set it accordingly....

  • Plug-ins for vocal editing (logic pto 8)

    Does anyone know where I can get a really nice vocal editing plug in for logic pro 8? Something like v-vocal in sonar? I know of antares autotune but is that for mac?
    Thanks guys!

    Anything that is available as an Audio Unit can be used in Logic. Antares Autotune is available as an AU.
    But trust me on this one, this is the one to own...
    http://www.celemony.com/cms/index.php?id=products_plugin

  • How do i import 3rd party VST plug-ins into Logic Express 8???

    I downloaded some vst plug-ins for logic express online somewhere and the instructions to install them says to go to library/audio/plug-ins/vst and to just drop them in there. i do that, but then when i drop them in there and then start up Logic, they're no where to be found in the program
    is there another way you are suppose to import vst's?

    You can't use VST plugins straight in Logic. The format recognized is AU (Audio Units) but there is a workaround using a program called VST to AU Adapter.
    http://www.fxpansion.com/index.php?page=5
    cheers
    rob

  • Korg Microkontrol or Novation SL MkII for Logic 8...

    I'm planning to get a new control surface and i'm not decided about which model to choose between Korg Microkontrol and Novation SL MkII....i'm looking for something that allows me to control The Mixer, Instruments and Plug-ins for Logic 8...please any advice will be highly appreciated...thanks.

    I'm planning to get a new control surface and i'm not decided about which model to choose between Korg Microkontrol and Novation SL MkII....i'm looking for something that allows me to control The Mixer, Instruments and Plug-ins for Logic 8...please any advice will be highly appreciated...thanks.

  • Anyone using Antares Auto-Tune 5 with Logic Pro 8 on a Mac Intel?

    I just bought the upgrade from Auto-Tune 4 to Auto-Tune 5 since v4 didn't work with the Intel machines, and I'm using a Mac Pro.
    After trying to tune one simple part of one song, I'm going nuts. The plug-in is full of bugs, it seems -- mostly in graphical mode. Is anyone else either successfully using this set-up or experiencing major bugs with it?

    I'm thinking it's an Intel thing.
    When I try to use the various tools in the graphical view, the plug-in will just basically stop responding. I can't close out the plug-in window, and sometimes the "options" window of AT 5 will pop up for no reason and freeze. Its "cancel" and "OK" buttons are non-functioning at that point.
    I've hard to force quit Logic a few times now, which pains me to say. Not to mention that it's setting my project back.
    Antares doesn't have a forum, and I can't find anything else about this apparent anomaly online anywhere.
    Unrelated: I've had problems with Drumagog in LP8 as well. If I try to drag the Drumagog pop-up window around the screen, the only thing that moves is the semi-transparent LP 8 "container". The actual Drumagog window stays put as the LP 8 window that frames the Drumagog window moves about. Very strange.

Maybe you are looking for

  • Crystal Report, BW and BO

    I know in order for BO scheduler to run a report the report my be saved on BO server. I would like to know if you can create a report using BW query then save the report on BO to have the scheduler run the query? Thanks, NewToProgramming

  • Download to excel in not coming in alv popup

    Hi All, Please have a look at the demo program SALV_DEMO_TABLE_POPUP.  The ALV displayed as a popup don not have button to download the data into a excel sheet/ spread sheet. Can someone please suggest how it can be added to alv toolbar ? I  have sim

  • Access Connections and Group Policy generated network profiles

    Hello, We are in the middle of rolling out 3500 T400 machines and are having fits with Access Connections 5.02. We have a default in-house Preferred Wireless Network Profile that is created on each machine via Group Policy. This works fine with AC an

  • Bring Back the Records From R/3 To BW

    Hi Friends We have a Generic data source and define ERDAT as Delta Field of type Calender day.after data coming to BW,we delete some records by using routine.we bring back these records from R/3 to BW. For Example :  01.03.2006 and 02.03.2006 records

  • Import data backup into another DB instance

    Hello all. I need to import a Data Backup into Another Database instance. MaxDb version 7.3. On higher versions of MaxDb I performed this operation without any problems (http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/d5ebc2c9ed3ab3e10000000a422035