Auto update fails with permissions error on Win 7

Everytime there is an update and I try to istall it I get this error on Windows 7 :
How do I set it right?
My user a/c has admin privileges to my system. It is my personal laptop, so no corporate policies or such stuff.
Currently I have to download the update everytime manually and install it.
My currently installed version is : 11.4.402.265
And I have chosen to be notified when updates are available.

Did it and this is the final output :
Elapsed Time: 00 00:00:00
Done: 13, Modified 13, Failed 0, Syntax errors 0
Last Done : C:\Windows\SysWow64\Macromed\Flash\NPSWF32_11_4_402_265.dll
=========================
Finished.
=========================
Press any key to continue . . .
I will have to wait for the next available update and see if this works. I will update this post once that happens.
Please note that several of the registry keys mentioned in the batch file are not present in my registry. I did not verify all the resources mentioned there. I have copied the complete output and I can pass it on if it can be of any use.

Similar Messages

Software Updates Fail With Permissions Error

Three recent software updates (Security Update 2008-02 v1 & v1.1, Aperture 2.1) have given me problems when using the default mode where the Software Update Systems Preferences application downloads and installs in one continuous sequence. The Security updates both failed with a permissions error at the end of the download, saying they'd move the Package file to the trash where I could install it manually. Neither one actually placed anything in the trash though. Instead I downloaded the installer disk images from the direct link at Apple.com and installed the Package from Finder. With the Aperture installer the error was something about an inability to expand the installer. This time I performed a "Download Only" in Software Update then ran the installer once the download was complete that way. This worked too.
So far I've run a permissions repair from Disk Tool and changed the read/write permissions on the /Library/Updates folder as suggested in an earlier thread. Neither had any effect on subsequent updates. What should I try next?

I just ran into this and what was happening to me was I had SU to automatically download updates in the background.
But I have 2 user accounts i use, so it was downloading the package under user A and I was trying to install via user B.
So i just deleted the old file in /Library/Updates then re-downloaded. I could have also just changed the permissions on the file.

Itunes new update failed with an error R6034

Itunes update failed with several error R6034

Follow the directions of tt2 in: https://discussions.apple.com/thread/5822086

Xperia z1 4.3 update failed with UE error code 5

Got this error while updateding Z1 c6902 to 4.3 on OS X. What should i do?

The first thing to try is to update the version of Java you are using then restart the computer and try the update again:
http://www.java.com/en/download/help/mac_java_update.xml
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

CCMS agent update fails with an error

Hello All,
We are trying to update CCMS agent 700 unicode version on 640_REL unicode kernel.
But we are getting below error
./sapccm4x -v
Could not open the ICU common library.
   The following files must be in the path described by
   the environment variable "LIBPATH":
   libicuuc30.a, libicudata30.a, libicui18n30.a [nlsui0_mt.c 1557] pid = 860208
Please help.
Thanks,
Anu

If you use the Unicode version you need to install the Unicode libraries also.
You find them in the download area (where you got the CCMS patch) under "UCLIB". I assume this is AIX so you can also search for the file
UCLIB_3-20000978.SAR
extract it and put the files in the kernel directory.
Then logout and logon (the shell) and try again (or simply give a 'rehash' command).
Markus

Iphone 6 plust update to 8.1 failed with unknown error (6)

Trying to update my iphone 6 plus to ios 8.1 using windows laptop running windows 7. It failed with giving message update failed with unknown error (6).
Exact error is:
     The iPhone "iPhone" could not be restored. An unknown error occured (6).
After this whenever I connect iphone to my laptop itunes shows serial number as n/a and it keeps on asking me to restore but always fails.
Any help in resolving the issue (either completing the update or restoring to factory defaults) is highly appreciates.
Thanks.
Checked the update logs and see the following at the end:
[11:07:48.0460] requested restore behavior: Erase
[11:07:48.0461] device did not return saved USB log
[11:07:48.0461] device did not return saved panic log
[11:07:48.0462] previous restore failed with exit status 0x100
[11:07:48.0463] connected to service com.apple.mobile.restored
[11:07:48.0464] using protocol version 13
[11:07:48.0464] unable to open device_map.txt: No such file or directory
[11:07:48.0465] board config = n56ap
[11:07:48.0466] no value returned for BootArgs
[11:07:48.0467] _copyDeviceProperty() failed for restore bootargs
[11:07:48.0468] no value returned for MarketingPartNumber
[11:07:48.0469] _copyDeviceProperty() failed for mpn
[11:07:48.0469] requested restore behavior: Erase
[11:07:48.0470] value query for 'HardwareModel' returned 'N56AP'
[11:07:48.0471] Established proxy for device ID 4
[11:07:48.0522] <Restore Device 06B9BF48>: operation 35 progress -1
[11:07:48.0525] requested restore behavior: Erase
[11:07:50.0998] <Restore Device 06B9BF48>: operation 28 progress -1
[11:07:59.0151] no override trust object found
[11:08:20.0357] device returned CFError with code 6
[11:08:20.0361] dumping CFError returned by restored:
[11:08:20.0364] CFError domainXXXXXXXXXXXXXXXXXXXin code:6 description:Fatal FDR Error returned from RestoredFDRCreate()
[11:08:20.0368] Sending acknowledgement that final status was received
[11:08:20.0759] Restore completed, status:6
[11:08:20.0759] Failure Description:
[11:08:20.0759] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[11:08:20.0759]    Depth:1 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Failed to handle message type StatusMsg)
[11:08:20.0759]       Depth:2 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Fatal FDR Error returned from RestoredFDRCreate())

Hi sailesh.chopra,
Thanks for the question. After reviewing your post, it sounds like you are not able to update because of an error 6. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

When deploy multiple updates, some updates fail with Hash does not match expected

If I deploy a few updates (less than 5) the deployment completes without any issues. If I have a lot of updates, most the updates install with no issues but some, and not always the same update, fails with an error in the CAS.log on the client
that states "Hash does not match expected" after several reties the update will download and install.
What could be causing this?
I have setup a new folder that is not on the root of the drive. This has not help with this issue but is handy in organization.
Ashley
County of San Bernardino
Assessor\Recorder\Clerk
Automated System Analyst

It you don't do anything and the hash calculates and downloads correctly then I would look to a network error of packet corruption or something wrong with the DP.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application:     Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now                    Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
     Download failed
     There was an error downloading the update. Error #16820
     Close

CRM 2015 Update 0.1 Install Fails with SQL Error

Hi, anyone managed to install CRM 2015 Update 0.1?
The software installed fine but the DB updates fail with a SQL error. Just want to know if this is just my issue or if MS have a bug in the update. This is the SQL error:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Data.SqlClient.SqlException: The current transaction cannot be committed and cannot support operations that write to the log file. Roll
back the transaction.
Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
All of the ORGs fail with this error, even when I try to apply the DB update via Deployment manager. I've had to back out the rollup.

The issue appears when the update process creates the index cndx_BusinessDataLocalizedLabel. This is a known cause which is under investigation internally. Currently it seems to plan to release in CRM 2015 SP1

IOS 4.2 update failed with error 1604..

Heyy I updated my iphone 3GS with IOS 4.2.. But finally it gave me error message saying Update failed due to error 1604. I restored my phone but how to get rid of this issue..Any help is appreciated.

http://support.apple.com/kb/ts1275

FDM Schema update failed with error

Hi,
Version: FDM 11.1.1.3
Database: Oracle 11.2.0.1
Running schema update on 9.3.0 schema failed with following error:
Ram the schema upgrade utility (Name: FDMApp Schema Level: 9.3.0)
The upgrade failed approximately 1 minute into the process with the following error:
Application [FDMApp] failed, check log file!”
From the log file:
…\Applications\FDMApp\Outbox\Logs\FDMApp_Update.log
** Begin Schema Update Entry **
Step 12: Update English Language Code to Standard Local Value Failed!
-2147217873-Data access error
SQL where it fails:
ORA-00001: unique constraint (FDMOWNER.PK_TAPPOBJECT_LOCALE) violated
UPDATE tSecObject_Locale Set LangKey = 1033 Where (LangKey = 1)
Anyone have any idea on this???
Thanks!

Hello,
I would suggest you make sure that you run the schema update on an appropriate FDM 9.3.0 application.
Language records (as the one mentioned in the error) do not exist in FDM 9.3.0 and should not be a problem.
I would suspect you either don't have a 9.3.0 application; or some other custom modification was made.
Thank you,

Updates fail with error 1328. I have re-installed Acrobat XI Pro twice without problems.

Updates fail with error 1328 I have re-installed XI Pro twice without problems.

2
William D. Burstow, CPG, QP
Consulting Economic Geologist
Tel: 541.573.1078
Email: <mailto:[email protected]> [email protected]

Windows 8 Windows Update fails with error 80244FFF

Windows 8 Windows Update fails with error 80244FFF

Hi @SURAJITsaha ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14-b049tu Sleekbook and issues with a Windows update.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
You might have to temporarily disable your virus protection.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Critical patch update fails with error code 73

RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)

That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P.

Auto update fails with permissions error on Win 7

Similar Messages

Maybe you are looking for