Auto Update & Firewall

Auto download below never completes; fails to install. I have WinXPx32. "Installing Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86 (update 1 of 1).
Plus, my Firewall keeps shutting itself down. I have Security Essentials. Why does my Firewall keep shutting down? Thank you for anyone's assistance, rilc1. Please make it very simple fix as I have a brain injury.

For all things Windows XP I'd ask them here.
http://answers.microsoft.com/en-us/windows/forum/windows_xp?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1391568550506
For sercurity essentials I'd ask here.
http://answers.microsoft.com/en-us/protect/forum/mse?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

How to stop windows ipv6 route table auto-update

In ipv6 , windows xp can get one global ipv6-address. how to delete the address and del the route in route table persistent? And stop route table auto update?

The WsusContent folder is filled with 256 folders that are two-characters long (e.g. 00, 0A, 0B, etc), and each of those folders are filled with exe and cab files all with what appears to be a GUID as a filename.
Currently the C:\Program Files\Update Services\WsusContent folder is 27.5GB in size with 256 folders and 15,361 files.
Classifications are confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
Critical Updates
Definition Updates
Security Updates
Service Packs
Update Rollups
Updates
Product selection is confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
Developer Tools (VS 2005 - 2013, etc)
Exchange 2007, 2010, 2013
Forefront Endpoint Protection 2010, TMG Definition Updates for HTTP Malware and NIS, TMG, TMG Firewall Client
BitLocker Admin
Lync 2010, Lync Server 2010 and 2013
System Center DPM 2006 and 2010
Office Dictionary updates, new dictionaires, XP, 2003, 2007, 2010, 2013
Silverlight
SQL Server 2012, 2000, 2005, 2008, 2008 R2, 2012, feature pack
System Center 2012 (all), 2012 R2 (all), 2012 SP1 (all)
Windows (all except EU browser choice and graphics drivers for 8.1 upgrade)
Admittedly we could update that list a bit, but it sounds like you don't think there should be any content downloading to the WsusContent folder at all?

AnyConnect failing to auto-update upon connecting, requires a re-install

We recently upgraded our 5510 at one of our clients to ASA software version 9.1(5), and after that was up and running and stable, we decided to upload the newest AnyConnect package files to the firewall for VPN users to get updated to the latest version.
The VPN connection is setup with radius authentication, and it has been working perfectly for a few weeks now. But just to add, when we had 8.2(5) software on the ASA and would put newer versions of the web deployment package on the ASA, clients trying to connect via VPN would auto-update without a problem. Same with Mac's.
So with the new software on the ASA, I ran a test from my home office, I uninstalled AnyConnect and installed an older version, 2.5.x. I then tried to connect via VPN with the thought that it would automatically update my VPN client to the version of the client on the ASA which is 3.1.05178. I watched it connect, ask for my active directory credentials, it would connect, then check for updates, and then say it was downloading an update. Shortly after, AnyConnect popped up a window saying "The VPN Client Agent was unable to create the interprocess communication depot." and I have to click Ok. Basically what happens here - http://www.itsystemadmin.com/the-vpn-client-agent-was-unable-to-create-interprocess/ but I do not have ICS turned on on the network adapter or any of my network adapters.
After clicking ok, it shows me the AnyConnect window, but the program is now partially non-functional, it is there, but the connection address is gone and if I enter it and click "Connect" it gives me an error immediately.
What I then have to do is go onto the ASA, remove that newer package and upload an older one. Then I re-install the VPN agent on my computer and re-connect, it doesn't find any update because I'm now running a newer version on my computer than the one that is on the ASA, and it connects fine.
I've tested this with a few employee laptops and they experience the same thing. I'm not sure if there is something that isn't compatible between this latest ASA software and the 5510, or what the issue is. I have tried putting slightly older versions of the web deployment package on the ASA and I still get the same problem. The problem is when the client computer is running an older version of AnyConnect and the ASA has a newer version, it fails upon initial connection and ruins the AnyConnect program and it has to be re-installed.

Feel lucky. Lot of people are having wifi problems with 8.x.
You should try to update from iTunes. iTunes requires less space on your machine for the update.
Robert

No Auto-Update for To Do list, session message and toast message

After LC ES Server hardening, we noticed that auto-update is not working for To Do list, session message and new task notification toast message. Before server hardening, all of them are still working fine.
Does anyone know why auto-update is not working after server hardening? Is there any specific port numbers which need to be enabled/opened to solve this issue?
FYI, we also noticed that some RemoteEventClient error messages occur many times in jboss server.log file as the following:
--- LOG QUOTE START ---
2008-01-10 15:26:16,086 INFO [STDOUT]
GMS: address is neptune:[MULTIPLE VARIOUS PORT NO]
2008-01-10 15:26:19,398 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] Client JGroup initialization failed to connect to service JGroup. Service JGroup initialization may not be complete, retrying...
2008-01-10 15:26:20,414 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver using JGroups config UDP(bind_addr=10.77.250.248;mcast_addr=238.42.102.134;mcast_port=42707;ip_ttl=8):PING(tim eout=3000;num_initial_members=6):FD(timeout=3000):VERIFY_SUSPECT(timeout=1500):pbcast.NAKA CK(gc_lag=10;retransmit_timeout=600,1200,2400,4800):UNICAST(timeout=600,1200,2400,4800):pb cast.STABLE(desired_avg_gossip=10000):FRAG:pbcast.GMS(join_timeout=5000;join_retry_timeout =2000;shun=true;print_local_addr=true):VIEW_ENFORCER
2008-01-10 15:28:21,216 INFO [STDOUT]
GMS: address is neptune:3874
2008-01-10 15:28:24,528 ERROR [com.adobe.livecycle.remoteevents.client.RemoteEventClient] Client JGroup initialization failed to connect to service JGroup. Maximum retries exceeded.
2008-01-10 15:28:24,528 INFO [STDOUT] Jan 10, 2008 3:28:24 PM com.adobe.workspace.events.RemoteEventClientLifeCycle$RemoteEventInitThread run
SEVERE: null
com.adobe.livecycle.remoteevents.client.RemoteEventConnectionFailedException
at com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver.<init>(Remo teEventClient.java:213)
at com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver.getReceiver (RemoteEventClient.java:159)
at com.adobe.livecycle.remoteevents.client.RemoteEventClient.<init>(RemoteEventClient.java:3 61)
at com.adobe.workspace.events.RemoteEventClientLifeCycle$RemoteEventInitThread.run(RemoteEve ntClientLifeCycle.java:65)
at java.lang.Thread.run(Thread.java:595)
--- LOG QUOTE END ---

JGroups is an open source project that allows processes to send messages to one another. LiveCycle data services uses it for its messaging implementation (basically it configures the server to multicast messages to all the listening clients...even in a clustered environment across different LAN/WAN).
In most cases the default configuration will work fine, the problem is that if you are running a firewall on the server (or your local machine...i.e. windows firewall) the ports that JGroups uses for its communications can be blocked. In a local environment its easy enough to disable windows firewall and bounce your server to get things working.
In a production environment you need to open the ports that JGroups is using. These settings are in the Global Administration settings (as mentioned by WorkspaceUser above). If you export it and look at the JChannelConnectionProperties you'll see the ports its using and you can set your firewall to allow communication to those ports.
Bryan

IPS Auto Update 5525X

Hello,
I have two IPS ASA5525-IPS "module" of 5525-X Firewall.
I set the proxy connection in DNS/Proxy Settings for update the signatures, but, i receive an error above:
Auto Update Statistics
   lastDirectoryReadAttempt = 11:03:09 GMT-03:00 Wed Jan 09 2013
    =   Read directory: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
    =   Error: AutoUpdate exception: HTTP connection failed [1,110]
   lastDownloadAttempt = N/A
   lastInstallAttempt = N/A
   nextAttempt = 11:00:00 GMT-03:00 Thu Jan 10 2013
Auxilliary Processors Installed
Testing the connection i can see the packet direct in my firewall, and not passing over the proxy, i need the IPS use the proxy to update signatures.
The configuration looks okay for me.
Any sugestions?
Tks a lot.

Hi,
This enhancement to use proxy server for updates would be available in future release. (CSCsv89560)
Regards,
Sawan Gupta

Kill auto updates

Have both iPhone 4 and iPad 1. Constantly pestered with auto updates (nagware). Don't want to update or upgrade because things on both devices work just fine. "If it ain't broke . . .". Anybody?

There is no setting for that it, it just checks everytime you plug your idevice in...but you can "block" it if you prevent itunes from accessing the internet (firewall) or if you don't want to do that you can disconnect your computer temporarily and sync.

Adobe Flash Update Firewall Port

I have a windows 7 computer with the firewall set to block both inbound and outbound traffic. What program and firewall port(s) do I need to allow outbound traffic for the Flash auto update to work?

when you download something from the Internet something can go wrong with the data
so likely the install packet for flash is corrupt because of something along those lines
to offer a faster Internet service your ISP (internet service provider) keep a cache or local copy of downloaded data so should another user
request the same data all the 1's and 0's need not travel across the internet once more which take more time
the problem is that the cache has no idea that the data got corrupted so until the ISP's cache is cleared over time you may get the same corrupted data should you try to redownload the data
otherwise there is something wrong with adobes site

DesktopApp auto update URL port redirection.

Hi Everyone,
We are using Filr-1.0.1-HP1 and we are using the port-redirection option to redirect port 80 & 443 to 8080 & 8443 respectively. However this port-redirection doesn't seem to work for the auto update URL. I would rather not open the port 8443 on the firewall. Am i missing some configuration option somewhere?
https://<baseurl>/Desktopapp
invalid URL
https://<baseurl>:8443/Desktopapp
OK
Kind Regards,
Justin Zandbergen
edit: typo's

Originally Posted by thsundel
Justin, take a look here: https://forums.novell.com/showthread...67#post2295867
Tomas
Hi Thomas,
Thanks for the advice, i knew that was an option, but i would have preferred to stick it on filr.<customer>.nl/desktopapp instead of something.<customer>.nl/desktopapp. Ah well, it works now. Thanks!
Kind Regards,
Justin Zandbergen

Update never completes - always "connecting to update server" I can do manual update but why doesn't auto-update work?

I have this same problem with three machines (all linux - different versions of linux & firefox). Yes, I could do a manual update. But, I would like to get the issue with auto-update sorted out. I have a common network setup: private IP (192.168.15.xxx) on a router connected to COMCAST. There is a firewall but no proxy.

Thanks cor-el! Your question about how it was installed was spot on. It was installed as root (I always do that for an app like Firefox so that it is available to all users. That is also the default when installing apps with yum or other package managers). The solution is to run firefox as root (''kdesu firefox'') so that it has access to the installation folder for writing. I selected Help -> about firefox and it updated right away.
The error for the mozilla people is in not detecting and either handling (asking for root privileges) or reporting the problem instead of hanging up in an infinite loop.
Thank you.

Firefox wont connect after auto update!!

Hi, for ages now my Firefox has tried to auto update every so often. After the update it would never connect to the internet, so I would uninstall and re install the previous version that i still had in my downloads list. However, yesterday it did the same thing, so I uninstalled but the old version installer has vanished from my downloads list!! So i set about trying to get the updated version to work. Allowing it on the firewall, turning off firewall...nothing. I just don't understand!! Please help!!

Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Firefox auto-update bounces back end forth between 3.6.11 and 3.6.12

Firefox keeps going through the following apparently endless cycle: It realizes it's not on the latest version and auto-updates from 3.6.11 to 3.6.12. Everything is fine for a few uses, then it tells me it needs to reboot to complete an update, upon which its "completion" of the update results in it reverting back to 3.6.11. After a few uses of that version the entire cycle repeats (It again wants to install an update to 3.6.12)... and so it continues

You can check for a problem with the prefs.<br />
See http://kb.mozillazine.org/Preferences_not_saved

Client Auto-Update questions

We just updated our Dev system to SP5 with Patch 2, but the clients are not updating automatically.
I have checked that the Client and Admin boxes are checked for auto-update and can see nowhere else that this can be done.
I double-checked with the Master Install guide, and this appears to be the only thing that I need to do to make it work.
The clients are currently at 502, and they should now be 506.
Also, is this controlled by the files in C:\BPC\Websrvr\Web\Installation?
I have checked the live server (BPC 5.1 SP3) and the Dev server (BPC 5.1 SP5r2)
Both of them have EverestClient.exe and EverestAdmin.exe with version number 12.0.0.49974
Does that seem right? I would have expected an increment in version number.
Has anyone else seen this, and can you offer any advice?
Thanks
Craig
Edited by: Craig Aucott on Feb 23, 2009 9:46 AM

Here is an extract from the note:
It does not say about the Patch! sorry...
the note is 1269662
Summary
Symptom
The Client Auto Update feature does not work in 5.1 SP5.
Other terms
auto, update, client, upgrade, install
Reason and Prerequisites
This is due to unintended consequences of fixing IM 3569686 issue in SP5.
Solution
Remove the '<remove name="Documentation"/>' node from the web.config file located in the x:\bpc\websrvr\web directory and save.
Once all clients have been updated, add the node back to the file.
The node is found in the following section:
<globalization requestEncoding="utf-8" responseEncoding="utf-8"/>
<webServices>
       <protocols>
            <add name="HttpSoap"/>
            <add name="HttpGet"/>
            <add name="HttpPost"/>
            <remove name="Documentation"/>
        </protocols>
</webServices>
Header Data
Release Status:     Released for Customer
Released on:     25.11.2008 19:51:41
Master Language:     English
Priority:     Correction with high priority
Category:     Program error
Primary Component:     EPM-BPC-MS-SVM-OTH Other
Hope this helped
Bye

How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

Auto update of Schedule Agreements

Once a schedule agreement has been created will MRP auto update the delivery date (for JIT) if the lead time is zero days and the new need date is today?

You need to check what is the procedure (T-Code) from which the data gets updated into these tables.
For example
when we craete a material from MM01 the data gets updated in the corresponding table i.e. EKPO.
In same way you need to find the process and then you can use BTE (Busineess transaction events) for that process. BTE are only for FI module and these tables are also related to FI .

My firefox recently updated. Now my pop mail server won't work. I did a 'restore' to last week, and it was fine. It has now auto updated. No mail server.

I have read through several responses to others who are having problems following an update. I am not computer savvy enough to understand half of the recommended 'solutions'. I need clear and definitive instructions of what to do. (Instruction for 'dummies' is what I need.) I can not 'restore' my computer continuously, only to have the auto updates cause the pop mail server to stop working each time. If there is nothing I can do, I guess I will have to stop using Mozilla Firefox. Can you help?

There is no solution for Firefox and POP. Firefox doesn't do email and has no need for a POP email server.
If you are using Firefox to view and send "email", you are accessing a webmail service provider.
http://en.wikipedia.org/wiki/Post_Office_Protocol

Auto Update & Firewall

Similar Messages

Maybe you are looking for