Auto Update of characteristic values in PO from SRM.

Hi,
For Configurable material we have characteristics values.
Material is configurable material with material type as services.
Same ECC material is replicate in SRM.
Create Shopping cart in portal SRM EBP for Multiple line item for material. Each material item will have different characteristics value.
Currently User attaching excel sheet with different characteristic value in Shopping cart.
Once Shopping cart no is created and Shopping cart no goes for approval.
Once approved, PR is created automatically.
Attached document is available in PR.
Buyer has to maintain manually characteristics value for material in Purchase order (PO) for each material item.
Is any way to Update Characteristics values in PR automatically when saving?
Regards,
Swapnil

check if the condition is marked as statstical one in the pricing procedure

Similar Messages

Auto Update of configuration values in PR from SRM.

Hi,
For Configurable material we have characteristics values.
Material is configurable material with material type as services.
Same ECC material is replicate in SRM.
Create Shopping cart in portal SRM EBP for Multiple line item for material. Each material item will have different characteristics value.
Currently User attaching excel sheet with different characteristic value in Shopping cart.
Once Shopping cart no is created and Shopping cart no goes for approval.
Once approved, PR is created automatically.
Attached document is available in PR.
Buyer has to maintain manually characteristics value for material in Purchase order (PO) for each material item.
Is any way to Update Characteristics values in PR automatically when saving?
Regards,
Babar

Hello,
updated_by and update_datePlease use triggers to populate audit data. That's the best way to do.
CREATE OR REPLACE TRIGGER "TRG_TABLE_NAME_BRU"
BEFORE UPDATE ON "TABLE_NAME"
     REFERENCING OLD AS OLD NEW AS NEW
     FOR EACH ROW
BEGIN
     IF NOT UPDATING ('UPDATED_BY') OR :NEW.UPDATED_BY IS NULL THEN
          :NEW.UPDATED_BY := NVL(v('APP_USER'),USER);
     END IF;
     IF NOT UPDATING ('UPDATE_DATE') OR :NEW.UPDATE_DATE IS NULL THEN
          :NEW.UPDATE_DATE := SYSDATE;
     END IF;
END TRG_TABLE_BRU;
/Regards,
Hari

Copy characteristic value(class 023 ) from the material master to the batch

Dear All,
Is there a way to copy the characteristic value (class 123) from material master to the batch master automatically once we create a batch of that material
I tried to create a dependency, but didnu2019t know what to write in the dependency editor
Please advise

I dont know if its possible in standard, you can try and create a reference batch, and use the below user exit I found in SAP library :
Set Up Customer Exit for Determining Source Batch
You can use function module exit EXIT_SAPLV01Z_011 in SAP enhancement SAPLV1ZN when assigning characteristic values to batches. You use this to specify a reference batch when creating a new batch with the central function module VB_CREATE_BATCH.
Further notes
The reference batch must always be specified completely. This means the reference material, source batch and reference plant details must have been entered if the batch is determined at plant level.
All batch master data is copied. If the batch is classified in this enhancement, the values assigned to the corresponding characteristics are copied.
In the exit, you can use a communication structure with the application data for the respective business transaction (for example, plant or material type). If you require further information, you must obtain it yourself in one of the user exits (such as time, user name, or date, for example).

Update item characteristic values using BAPI_SALESORDER_CHANGE

Hi Experts,
Could anyone give me sample code on how to update the characteristic values of a sales order item? Points will be awarded... Thanks!
Regards,
LM

Just checked on OSS note 549563 regarding this. This is resolved. Thanks

Condition type value updation using characteristic value in sales order

Hi Experts,
We are implementing SAP for one of our Spain client. In that one of the Legal requirements is, whenever they are selling the finished products to domestic customers who contain OIL as one of the component then, some additional cost needs to be calculated and collected from customer and which needs to be paid back to Spain Government every month on Region basis.
If OIL is not a component to produce the finished product then, not required to charge the customer additionally.
The OIL content used to produce every finished product will vary based on product characteristic value. Meaning, for some finished product the OIL used will be 2.2 KG and for some products it will be 3.5, 4.3 KG and etc.
Since various combinations of products are available for the client, during sales order creation we are planning to update some special characteristic which the data flow from u201CVariant Tableu201D. In the variant table we are going to maintain the OIL Quantity required making finished product.
But we are not sure how to activate a new condition type with the value fetched in the special characteristic. This new condition type needs to be activated based on this characteristic value and multiplied with total order quantity and price to charge from customer.
Example, the special characteristic fetched the value of 2.2 KG based on variant table. Total Order quantity is 10 PC and charge is 0.06 EURO per KG. in this case, (2.2 x 10 ) x 0.06 EURO = 1.32 EURO
I need the expert opinion how to activate the new condition type based on characteristic value and achieve the above requirement.
Thanks in advance.
Warm Regards,
VEL

Hello,
I have replicated the whole requirememt in IDES and getting the price calculation as needed but the only issue with the Conversion factor for the condition type. Either you need to maintian the conv factor in material master or need to enter manually for the condition type in SO. Some how you have to maintain the conversion factor to calculate the price for the condition type in different unit.
For easy of understanding Lets make the whole requirement in 2 parts
Part - 1
Oil qty calculation. For convenience sake I have taken oil qty also in TO
1) Created a num char OIL_QTY1 with length 9 and decimal places 5 and UOM as TO
2) Created Variant table to infer the OIL qty in TO per piece of finished prod ( This oil qty data may be depends on various factors). For certain Finished products the oil qty may be 0 or blank
3) Created a REF char SO_QTY to pull the SO qty to configuration and add this char in class 300(Table:VBAP,Field :KWMENG)
4) Created another char SO_OIL_QTY (Num with length 9 and decimal places 5 and UOM as TO)
5) Created a PROCEDURE say PROC_SO_OIL_QTY with code
*$self.SO_OIL_QTY = $self.OIL_QTY1 * $self.SO_QTY*
6) Create another PROCEDURE as mentioned earlier with modified code
$SELF.A_VARCOND = 'TEST_001' if OIL_QTY1 specified,
$SET_PRICING_FACTOR ($SELF,A_VARCOND,'TEST_001', SO_OIL_QTY)
Note: Maintain proper seq of the procedures in profile. The Qty cal proc should be before the price related procedures.
PART-2
1) For the condition type maintained 60 EUR per TO (0.06 EUR per KG)
Now if you create SO for the Finished product of 10 PC
the Char values will be
OIL_QTY1 = 0.00022 TO (inferred from Variant table th proc)
SO_QTY = 10
SO_OIL_QTY = 0.0022 TO
Get into conditions tab
Here Condition type ZSIG will be displayed as error with Amount 60 EUR per TO and condition value will be blank. Just enter value 1 in the col NumC and CCon fields.
Now the Condition value will appear as 1.32 EUR.
Hope this gives some more clarity
Regards
Brahmaji D

Update COPA characteristic values during order settlement - KO88

Hi,
We need to update some COPA characteristic values during order settlement using T-code KO88.
Looked for options in KEDR transaction, did not find any exits.
Could some one help us to resolve this issue.
Thanks
Vikram

Hello and thanks for your response.
We have actually created the new characteristic (WWCRE) and we are populating it in the user exit. I think the issue is that the characteristic may be 05012010 at the time of the sales order, but it is 04012010 at the time of billing.
Unfortunately, the PAOBJNR in the billing doc is the same as the order and the user exit doesn't seem to accept the changed value or create a new entry in the CE tables.
For example, if I change the sales order to cause a new WWCRE value, the system automatically generates a new PAOBJNR but at the time of billing, regardless of changes to the values, it simply keeps the old PAOBJNR from the sales order and doesn't reflect the changes.
I hope that makes some sense. Please let me know if you have any other suggestions.
>Ray

Best practice for updating ATWRT (Characteristic Value) in AUSP

I've notice that when we change the Characteristic Value of a Classification, that it does not update in the MM record. We have to go into MM02 for each material number that references Char Value and manually change it for row in AUSP to get updated.
Should i just create a report to Loop through and update table AUSP directly? Or is there a better way to do this via a function or BAPI etc? Wanting to know what best practice is recommended.

Hi Scott
You can use a BAPI to do that.
Check the following thread:
BAPI to update characteristics in Material master?
BR
Caetano

How to auto update LOV in Crystal Parameter inherent from SAP MDX query

Hi,
I'm using SAP BW MDX as my data source. How do I auto update the LOV in the parameters such that LOVs are always updated from the source.
I am using Crystal Report 2008.
Thank you.
Rose

Hi
Please refer to BusinessObjects XI Integration for SAP Solutions User's Guide from [here|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_sap_user_en.pdf]
Hope this helps!!!
Regards
Sourashree

Updating a characteristic value (CT04)

I have created a new class with corresponding characteristic. My characteristic has a single value, "01" representing document version number. I the MM, i add this new class to the Classification view for the appropriate material number. However, i have noticed that when we go to update the value in the characteristic, from lets say "01" to "02", we first get an error saying the value cannot be deleted (but the system lets us do this anyway) but more importantly when we do change the value, our hope was that the value in the MM class would automatically be updated as well. That doesnt seem to be the case as I have to physically go into the MM record and delete the class, then re-add it with the new updated value for the update to appear in the MM record as well as AUSP. This is my first time dealing with classifications/classes. Can someone give me guidance on how to achieve something more easily maintained?

In the CLMM transaction, select "Set and Change Values".
In the next screen, enter in 001 for material class in the class type field. Then add the characteristics you wish to change on the tab labelled "Chars". You can just add a new value to change all instances or you can specify an old value to change and only those with matching values will be changed.
Now click on the "Target Objs" tab. Enter in the material numbers you want to change. Click on the indicator "Overwrite Existing Values" to replace values, leave it blank if you are adding new values for a characteristic that allows multiple values.
On the menu bar is a button labelled "Test". Click on this to do a test run and see the log that is generated. When you have all the right selections, and the log looks correct, click on the button to the left of the Test button to execute the changes.
You can also use this to mass change assignments in certain classes. On the first screen, the first choice "Copy Values assigned to object" allow you copy the values from one object to another.. say for instance all the material class values from material A to Material A, B and C.
The third choice is "Assign value in matrix". This is very cool as it gives you a spread sheet form with the all the objects, (materials), listed vertically, and all the characteristics listed across. You can see the current values, and manually change any of the ones you want to.
This can be a very powerful transaction. It should be limited to only a handful of people
Craig

Auto update people picker value with email id when we add username in another people picker field in sharepoint 2013 list using javascript

hi friends
i have to people picker fields
pp1 and pp2
pp1 represents username
pp2 represents email id
here i problem is if user enters name in pp1, pp2 has to update with email id of corresponding user in pp1 dynamically.
using java script is there any solution for this.
please help me

Hope below will help
<asp:Content ID="Main" ContentPlaceHolderID="PlaceHolderMain" runat="server">
<script type="text/ecmascript" language="ecmascript">
var user;
var visitorsGroup;
function runCode() {
var clientContext = new SP.ClientContext();
var groupCollection = clientContext.get_web().get_siteGroups();
// Get the visitors group, assuming its ID is 4.
visitorsGroup = groupCollection.getById(4);
user = clientContext.get_web().get_currentUser();
var userCollection = visitorsGroup.get_users();
userCollection.addUser(user);
clientContext.load(user);
clientContext.load(visitorsGroup);
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded), Function.createDelegate(this, this.onQueryFailed));
function onQuerySucceeded() {
alert(user.get_title() + " added to group " + visitorsGroup.get_title());
function onQueryFailed(sender, args) {
alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
</script>
<input id="Button1" type="button" value="Run Code" onclick="runCode()" />
</asp:Content>http://msdn.microsoft.com/en-us/library/office/jj246835%28v=office.15%29.aspxhttp://msdn.microsoft.com/en-us/library/office/jj920104%28v=office.15%29.aspxhttp://stackoverflow.com/questions/20981226/sharepoint-2013-get-current-user-javascripthttp://sharepoint.stackexchange.com/questions/31457/get-user-via-javascript-client-object-model

Firefox auto update has changed my default language from English to American English. How do change it back?

and keep that as the default

If the Firefox user interface (menu bar) is in the wrong language or if you want to change the current language then you can get Firefox in the language of your choice here:
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html

Function Module to update Characteristic Value (AUSP table entry)

Looking for a function module/BAPI to update a characteristic value (AUSP table entry).
This is for a material master Material classification value, not a Variant Config value that I need to update.
Anybody have one? I have one that will find the value, but not change it.
Thanks.

That wasn't it, but it gave me the one piece I was missing.
Answer is:
Function Module "CLAE_CLASSIFY_OBJECT"
In CHANGE_KSSK
M = 0
KLA = (Class Type)
OBJEK = (Material Number for the Material Characteristic being changed)
OBTAB = MARA
CLASS = (Class Name with Characteristic to be changed)
S = 1
S = (blank)
AENNR = (EC Change Number or Blank)
DATUV = (Today's Date or date for change)
C = "X"
In CHANGE_AUSP
OBJEK = (Material Number for the Material Characteristic being changed)
ATINN = (Chararacteristic to be changed)
M = 0
KLA = (Class Type)
ATWRT = (New Value for Characteristic)
C = X

Copy BOM Component Characteristic value in material PR created by MRP Run

Dear Gurus,
My requirement is I have materials like thread to maintain color characteristic i have create class - color- class type is 023 , now i want user should able to maintain characteristic value in BOM component (thread) of semifinish material. FG , SFG are not having any characteristic.
Now in PR and PO we can maintain characteristic value in Material Data --->Configuration tab , Configuration tab will come only when there is tick in material is configurable at material basic data 2 view of thread and in CU41 I have to maintain material for class type 300 - Variant , then in class assignment i have select class type 300 and 023 both and maintain class , both are having same characteristic please make me correct if i am doing wrong process, if i am not maintaining class assignment 300 in CU41, in manual PO system not allowing to enter characteristic value in configuration tab . so i maintain both class assignment 300 and 023.
Now for manual PR and PO system showing configuration tab and from PO configuration tab characteristic value is coming in MIGO automatically but when i am running MRP for finish material the auto PR generated by system for material thread is not showing configuration tab in Material Data of PR. I have maintain characteristic value in BOM --->Extra--->Batch Classification. Please guide me how to archive this.
Thanks & Regards
Akshay.

Akshay kukde,
Still i am unable to understand the reason for maintaining a characterstic value for a batch through BOM, I hope you are not changing BOM for every purchase order ?
can you explain what you expect by maintaing this one value for batch characterstic?
you can have many other simple option like
1) Create a material with colour included in it ex, Thread_red, Thread _green etc and use them in BOM
2) Use text in BOM to hold this discription for colour
3) Use batch management, class 023 in material master classification , defalut value for colour, purchase order will be created and while doing GR you can change in colur if its different then default you set earlier.
Akshay kukde wrote:
if i am creating PR Manually -ME51N , system showing configuration tab , where i can maintain characteristic value , which then reflecting in PO and from PO to MIGO
The above scenario I have tried by maintaining class type 023 and same characteristic in material Master. but result is same for auto generate PR by MRP- configuration tab is missing.
My requirement in this case is characteristic value should flow from BOM to PR generated by MRP.
when you manualy create PR you Thread material is consider to be a configurable material and thats why you are able to input configuration value, otherwise as soon as you put this configurable material inside a BOM of normal materila it loost its configuration feature, if you want you can create your parent material also as configurable material, assign same class to it and create configuration profile and take MRP run this time you will get PR with configuration tab as your thread get configuration derived from parent.
Hope above details may help you.
Check and reply, also mark replies helpful if it helps you.
Thanks
Ritesh

Auto update of time when changing time zones - PLEASE help.

I travel for a living and I can't figure out how to get this 8310 to auto update the time when I fly from one time zone to another. Can anyone help me with this? Thank you so much in advance!

I'm sorry to inform you that the blackberry does not have a feature like this yet. You can read this FAQ and it will give you some tips though.
Why doesn't my time update correctly when I change Time Zones? - BlackBerryFAQ.com
You would need to set that manually and enter the meeting times in accordingly.
Sorry!

Windows XP Permissions vs AIR Auto Update

Hello All,
I've just started getting into AIR, and I've run into an
issue. I'm planning an app that would be distributed to Windows XP
users with limited accounts. The issue I'm currently trying to
tackle is how to get the application to auto update when a user
opens it from a limited account. Currently it gives me the error:
"An error occurred while updating the application. Try updating it
again. If the problem persists, contact the application author.
Error# 0".
Since I'm a Mac guy, I don't know too much about permissions
and account settings in XP. Is there a way to simply give the
application the necessary permissions without having the user have
to login every time like the "Run with different credentials"
option.

No, there's no way around this. Prevent applications from
updating themselves is part of what limited accounts are supposed
to do.
You might try finding out how software is normally updated
for these machines. That's probably the path you want to take for
this application, too.

Auto Update of characteristic values in PO from SRM.

Similar Messages

Maybe you are looking for