Auto-update of date and time on Lumia 800

I've recently had my Lumia 800 in for "repair" as the auto-update switch did not appear on the menu.
The phone has come back (from carphone warehouse) with OS version 7.10.8858.136 and Firmware 1750.0823.8858.12460, both of which seem more up-to-date than the versions currently listed as the most recent.
[How can that happen?]
The auto-update switch is still not available to me, and I am told that the "newer software does not support this function"
REALLY? Or are they just fobbing me off?

What network are you on ?

Similar Messages

Auto update of date and time

Hi All!
I have a requirement wherein i will add three fields to a screen.Now if i enter value into one field with f4 help the other two fields shall be automatically updated with the current date and current system time.
Any simple logic to get this..
Please advise.

Hai Praneet Kumar
Go through the following COde
Just Copy & Paste in a report Program
then execute the code
TABLES : MARA.
DATA: BEGIN OF IT_MARA OCCURS 0,
        MATNR LIKE MARA-MATNR,
        MTART LIKE MARA-MTART,
        DATE type sy-datum,
        time type sy-UZEIT,
     END OF IT_MARA.
DATA : T_RETURN TYPE STANDARD TABLE OF DDSHRETVAL WITH HEADER LINE.
parameters : P_MATNR LIKE MARA-MATNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR MTART FROM MARA INTO table it_mara where MTART = 'ROH'.
loop at it_mara.
it_mara-date = sy-datum.
it_mara-time = sy-uzeit.
modify it_mara.
endloop.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
    RETFIELD               = 'MATNR'
    DYNPPROG               = SY-REPID
    DYNPNR                 = '1000'
    DYNPROFIELD            = 'P_MATNR'
    VALUE_ORG              = 'S'
TABLES
    VALUE_TAB              = it_mara
    RETURN_TAB             = T_RETURN
EXCEPTIONS
   PARAMETER_ERROR        = 1
   NO_VALUES_FOUND        = 2
   OTHERS                 = 3.
Thanks & regards
Sreenivasulu P

How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

Hi JN and Barry,
Barry wrote:
The second case may not be included in the available D&T formats in Numbers 3
For my region, the Date & Time data formats include month.
The Date Pop-Up
This may not be the case for all regions.
Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
Regards,
Ian.

Any way to see when an iphone 5s has been updated by date and time?

anyway to see when an iphone 5s was updated by date and time? that info is very important

Warren,
The message doesn't show if you use a local (it does when you use a property
node!). The boolean does blink!
Try the attached VI.
Regards,
Wiebe.
"Warren Massey" wrote in message
news:5065000000050000007C570100-1075935269000@exchange.ni.com...
> I've already tried something like this and it just does not work like
> I want it to.
>
> Enforced with a sequence structure I do this:
> 1) put up a message saying "Updating"
> 2) dump the updated data to the display
> 3) clear the message
>
> What I see on the CRT is this:
> 1) a message saying "Updating"
> 2) the message quickly goes away
> 3) several seconds later the image changes.
>
> My kludge/workaround is to add a variable delay before the message
is
> cleared. The delay is based on the image size and some
> empirically-derived constants.
[Attachment Picture Update.vi, see below]
Attachments:
Picture_Update.vi ‏45 KB

My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

Why do I get iMessage failed update date and time in settings

My iphone5 keeps changing it time zone on it's own and I keep getting a notification in messages saying iMessage failed update your date and time in settings. I have update it several times and it's keep doing it. Now it's just frustrating. How can I take care of this problem for good.

I have also been getting the message ever since I got my iPhone 5 on September 12. I have to reboot the phone to fix the problem or turn the "Set Automatically" off and then back on. This is a glitch likely with Apple's iOS software, but my Verizon store said that have received numerous complaints on this issue, but no patch has been released for it as of yet.

How to automatically update date and time on Numbers spreadsheet

Would like to have printed version of Numbers spreadsheet reflect present date and time. I know how to do this in Excel, but can't figure out how to get there in Numbers.

Add the date and time to the Header or Footer in the Print Dialog via the Insert menu.
It is only semi-automatic, in that to update the date and time, you must either delete and reinsert the date and time, or you must open the token and update by clicking the Set to Today button.
Jerry

Mail App not updating date and time

Hey guys,
Has anyone else has this problem: My Mail app isn't updating the date and time at the bottom of my screen. (In between, the refresh button on the left and the new draft button on the right) Not sure how to fix it...
Thanks in advance!

Click on View on the top menu, click on Columns, and then click on "Date Received" to select it. Once it is checked, the Date and Time will display.
Cheers,
GB

Ipad will not automatically set date and time

My ipad drained and when I recharged it the date read 31 Dec 1970. Now it will not automatically connect and update the date and time, and cannot connect to itunes. I can recieve emails on this device but I can's send emails. So it must have some kind of connectivity...would appreciate any comments or help. Very frustrated.

Try resetting it. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

Every time I create a new row, I want a certain cell to display the date and time the row was created. How do I do that?

=NOW() updates the date and time continuously, I don't want to do that. I just want the date and time in that cell to stay the same after that row is created. Seems like this would be easy, but I can't figure it out.

My preferred scheme is a variant of Barry's proposal 2
create the new row
select the cell in which you want to insert the date
type the shortcut dedicated to one of the four "Insert date" services delivered with WordService from Devon Technologies (FREE)
On a French keyboard, only one of the default shortcuts apply : cmd % which inserts the long date.
But we may edit these shortcuts.
Yvan KOENIG (VALLAURIS, France) mercredi 6 juillet 2011 15:12:16 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do I stop auto update of date/time

Hi,
I'm starting to despair, a while ago I stupidly clicked on auto update/time on a letter I was working on, it seemed like a good idea at the time. But now whenever I open any letter the date is automatically updated which is a major problem as I am losing the references to when I actually wrote and therefore sent these letters. I'm too scared to open letters now because I'll lose this important piece of information.
Any help appreciated!
Thanks
Nathalie

Next time, don't use the Pages 's insert date_time feature.
Use the one delivered in the free WordService from Devon Technologies.
It always inserts a fixed date_time.
But I have wondering about your problem.
The Pages User Guide states:
• To add and format the date and time, place the insertion point where you want the value to appear, and then choose Insert > Date & Time.
To change the date and time format, Control-click the date and time value, choose Edit Date & Time, and then choose a date and time format from the pop-up menu. *If you want the document to always show the current date and time, select “Automatically update on open.”*
Which, if I understand well means that the default setting is that the inserted date_time is a frozen (fixed) one.
Yvan KOENIG (VALLAURIS, France) mardi 30 mars 2010 16:29:17

Is there a way to auto fill DATE and TIME

I have the field format set to mmddHHMM
Can you please tell me how to have the date and time auto fill when the PDF is opened?
I am new at this so details are very helpful. Thank you!

Let's say the field's name is Now. Go to Tools - JavaScript - Document JavaScripts and create a new item. Name it "scripts".
Delete any code that is created by default and enter this instead:
this.getField("Now").value = new Date();
Click OK and you're done. The field will update each time the file is opened.

APPLE TV 2 HD model and updated to latest version 6.1.1 since doing that it won't set date and time and tells me my Apple ID and password are incorrect and I know there not. What do I do?

It connects to internet fine. I have tried restoring back to factory condition and hard wire update by connecting it to my Mac mini .
The date and time won't set. And won't acknowledge my Apple ID and password......... I am usually tech savy but this has caused me grief .
Do I need to downgrade my update....
But can't get any menus until I log in my apple account...
It can't log into my iTunes account until time and date have been set.
When I did the hard wire restore connected to Mac mini it wouldn't go past the date and time screen as it wouldn't when I did the wifi update too.
it just would get past that screen.
Anyone help!!

This is the result of a network issue. Ensure port 123 on the router is open.

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

Insert Date and Time doesn't update

i am inserting a date and time in my numbers documents so that i know which paper copy is the most current. i do this by going to Insert pulldown and selecting Data and Time while in a Footer Cell.
this data does not update upon re-opening the file and i end up printing multiple copies over weeks and months with simply the date that I inserted the Date and Time into the footer.
is there a way to do this so that it updates?
TIA

As most of the times,
this kind of question is answered in Numbers User Guide.
When you insert a date_time value in a cell, you insert a fixed value.
If you want a living one, you must insert a formula.
=NOW()
or
=TODAY()
would achieve your goal.
Yvan KOENIG (VALLAURIS, France) dimanche 25 décembre 2011 21:40:50
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Auto-update of date and time on Lumia 800

Similar Messages

Maybe you are looking for