Auto Updating using the built in updater?

Is there any command line options that would give me the ability to download updates and install them automatically using the built in program updater without user intervention? (ie: command line "check for updates" for Acrobat)
I have several users with several different versions(6,7.0,8.1,9.0, pro, std, ect..), and it would be a heck of a lot easier to update them this way. Rather then me downloading each patch and scripting each situation.
Rich

Both my internal mic and the one on my Apple headphones produce something I would describe as low level pink noise rather than high-pitched. Best bet is probably to compare with someone else's iPad. If they are radically different then you may need to get your swapped out under warranty.
tt2

Similar Messages

  • HT204053 I cannot use the password to update apps on my second IPhone.  It only works on one of the phones. They both have the same Apple ID and password.

    I cannot use the password to update apps on my second IPhone.  It only works on one of the phones. They both have the same Apple ID and password.

    If it really does not work, change your password here https://appleid.apple.com (Manage account) and try to add the account again. I hope it helps.

  • I have a macbook purchased in 2009. I just purchased a new ipod and am in a loop of updates that seems to have no end.  Do I need snow leopard? Will that then let me use the latest itune update?

    I have a macbook purchased in 2009. I just purchased a new ipod and am in a loop of updates that seems to have no end.  Do I need snow leopard? Will that then let me use the latest itune update?

    You need to buy Snow Leopard from the online Apple Store. You don't need Mountain Lion.
    (85170)

  • Iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgraded application.

    iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgrader application.  Repeatedly says it can't locate photos even when told to cancel.  I think the photos in question are in Nikon RAW format.

    iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
    iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
    You need to do the following:
    1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application. 
    2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
    3 - launch iPhoto 9.5 to open and finish the conversion of the library.
    OT

  • LIKP table updation using the IDOC_INPUT_DESADV1

    Hi,
    Please help me when and where the LIKP table is updating using the FM IDOC_INPUT_DESADV1. I debugged the program several times even though i couldnt able to find the updation part.
    Further to the above wherer exactly the idoc number is generrating in this FM.
    This is very urgent.Kindly give the replies at the earliest.

    Ubay
    Refer to this code in IDOC function module DOC_INPUT_DESADV1. Delivery order must be getting created thorugh this function module.
      CALL FUNCTION 'GN_DELIVERY_CREATE'
           EXPORTING
                VBSK_I        = S_VBSK
                NO_COMMIT     = TRUE
                IF_SYNCHRON   = ' '             "INS_HP_338221
                IF_NO_DEQUE   = 'X'             "n_632020
           IMPORTING
                VBSK_E        = S_VBSK
           TABLES
                XKOMDLGN      = T_DLGN
                XVBFS         = T_VBFS
                XVBLS         = T_VBLS
                XVERKO        = T_VSEK
                XVERPO        = T_VSEP
                IT_GN_HUSERNR = T_HUSN
                IT_GN_SERNR   = T_SERN
           EXCEPTIONS
                ERROR_MESSAGE = 1
                OTHERS        = 2.
    Thanks
    Amol G. Lohade

  • TS2529 what do i do when am unable to activate my iphone after using the itunes to update?

    what do i do when am unable to activate my iphone after using the itunes to update?

    I had something similar (wouldn't connect to my router). I just reset the router, and it went like a dream from there. Myabe your problem too? Good luck.

  • Go Daddy UCC Certificate: "ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update"

    Hello,
    I have this issue regarding certificate chains while performing Outlook Anywhere connectivity test
    by Microsoft Remote Connectivity Analyzer:
    "ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled."
    Note: even if I got the error, Outlook Anywhere and
    ActiveSync services work fine.
    Environment:
    - Exchange 2007 with SP3
    - Go Daddy Multiple Domains UCC certificate (up to 5 Subject Alternative Names)
    I already read and followed instructions on this TechNet post
    Can I safely ignore this warning about the SSL cert? Using GoDaddy UCC cert but it is a little bit different by this case.
    So after an investigation I understand the issue above is related to SSL certificate
    Certification Path (see screenshots below).
    NO ERRORS on ExRCA checking
    Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
    repository
    Go Daddy Class 2 Certification Authority is under Intermediate Certification Authorities
    repository
    Starfield Technologies (http://www.valicert.com)
    is under Trusted Root Certification Authorities repository
    ERROR on ExRCA checking
    Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
    repository
    Go Daddy Class 2 Certification Authority is under Trusted Root Certification Authorities
    repository
    Can you add some useful information ?
    I'm opening a support ticket at Go Daddy; I hope they could me some positive feedbacks.
    Regards,
    Luca Fabbri
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees, and confers no rights.

    Strange I have a feeling the exrca tool can't validate the godaddy class2 root authority due some older compability and wants to use the older original root authority valicert owned godaddy. Or when the exrca tool is validating the root CA it only has the
    goaddy class2 root ca that was issued by valicert and not the standalone cert when doing the comparision. I sent the question to MS and will let you know when I hear back.
    You can get rid of it
    https://certs.godaddy.com/anonymous/repository.seam
    Download the cert
    ◦gd_cross_intermediate.crt
    Then import it into the trusted root cert authority on your CAS boxes. Then you need to delete the other godaddy class2 root authority. Make sure you see the one you imported both will be named goaddy class2 root authority but one will be issued by valicert.
    Re-run the test and it will go away, I also saw the error with my domain as well using godaddy and got rid of it by using the new cert authority.
    James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

  • When updating my apps it stoped half way through and won't start so now I can not use the app recently updated it to ios7

    and won't start so now I can not use the app recently updated it to ios7 I have tried turn the device on and off still hasn't work and I would like to actually use my apps and I can not download new apps

    If the apps are waiting:
    Fix iOS Apps Stuck on “Waiting…” During Download & Install
    Otherwise:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download the apps to your computer and sysnc
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

  • My Ipod says to use the Ipod software updater application??

    I unplugged my Ipod and all the songs got deleted. This is the 3rd time this has happened and now when I plug it in to put the music back on, a box pops up and says "iTunes cannot read the contents of the iPod MICHELLE'S (that's my iPod). Use the iPod Software Updater application to restore the iPod to factory settings." What does this mean? & how do I update it to factory settings? Can someone please help?

    Use the instructions in this article to restore the iPod with the iPod updater; use the document it links to if you are using iTunes 7. Some iPods may require that they be connected to the iPod AC adaptor, a car adaptor, or a 6-pin FireWire port before the restoration process can be completed.
    (16822)

  • Can we use the built-in Row fetch for Multiple reports in a page?

    I need to create a page with multiple report regions. Each of it is based on a table. Those tables are different. I somewhat remembered that we can NOT use the built in automatic row fetch process if there are multiple report regions, neither the built in DML process. You have to make your own fetch and insert/update/delete process if you intend to.
    Also if I write my own row fetch and update processes, do I have to consider lock mechnism? or just simply write select and insert/update?
    Any input is appreciated.

    I think I found the answer. Would Scott or other gurus take a look at the thread and confirm it, in case the limitation is not in 2.0?
    Re: automatic row fetch
    What I am concered about is that the locking mechanism. If I have to write my own process to fetch and insert/update, other than the regular select and insert/update statements, do I have to put commit by myself, or htmldb can handle it automatically? Is there an example for this?
    Thanks in advance.

  • I can;t get firefox to use my usb web cam. It always uses the built in i sight cam

    fire fox uses the built in cam and does not recognize my USB webcam. Independent programs such as Skype, yahoo messenger and I chat have no problem with the USB cam.

    hello cl092, unfortunately there are currently authentication issues with the sync server - the admins are investigating this issue. maybe keep an eye on this thread to get updates when sync is restored to working order again: https://support.mozilla.org/en-US/questions/966368

  • Does reapplying 10.4.11 combo update negate the latest security updates?

    I've reapplied the 10.4.11 combo update in an attempt to trouble shoot some problems I've been having. My question is, "Does reapplying 10.4.11 combo update negate the latest security updates?" I've checked my computer using the "Software Update" option, and I'm given the message that I'm up to date. But that may be due to the fact that there's a receipt of the security update in my receipt's folder.

    Steve:
    If the Combo update was downloaded previous to the last security update being available it will not have included the security update. If the Combo update was downloaded after the security update was available, it will have included the latest security update. As new updates become available, the Combo update is updated so that it includes the latest updates. If you are concerned that the security update may not have been included in the Combo update, or you are sure that you downloaded the Combo update a while previous to the availability of the latest security update you can either:
    1. Download the stand alone security update and install it over what is already on your computer, or
    2. Download the current Combo update and install it.
    In either case, remember to Repair Disk Permissions in Applications > Utilities > Disk Utility before and after installation.
    Cheers
    cornelius

  • Three updates from the same Software Update Group showing as unknown, while all the others are showing as expected.

    Hi
    I have an issue from Septembers security updates where three updates from the same software update group are showing as unknown status rather than required / not required / installed etc.
    There are multiple other updates in the same update group and they are all displaying correctly with the figures I would roughly expect.
    I would have expected if something was wrong with the clients not returning software update scans that all the updates in this software update group (all deployed automatically as part of the same ADR) would show the same status of unknown, rather than just
    three of them.
    The updates in question are: KB2894842, KB2972215 & KB2977629 (First two .net 4.0 and last one IE11).
    Now these updates would largely be not required in our organisation as for the most part we use different versions so I would expect them to show as not required.
    Short of kicking off a mass software update scan cycle I don't know a) why this has happened b) if a scan cycle will fix it. Our clients scan every week and its been several weeks since the updates were deployed, that and the other updates have all reported
    back in.
    Anyone have any ideas? Its making the compliance results look quite poor :(
    Thanks
    Jonathan

    Hi,
    Is there any clue in the logs? Please review WUAHandler.log.
    What is the code you get when you run compliance report, like that in the following thread:
    http://social.technet.microsoft.com/Forums/en-US/becda545-4a5e-4ea3-bd83-8c7026767af5/software-update-compliance-report-showing-status-unknown?forum=configmanagerdeployment

  • Everytime I try to update my iPhone this happens: The iPhone cannot be updated because the iPhone software update server could not be contacted or is teporarily unavailable. Please try again later. Can you please tell me how to fix this? Thanks in advance

    Everytime I try to update my iPhone this happens: The iPhone cannot be updated because the iPhone software update server could not be contacted or is teporarily unavailable.
    Please try again later.
    Can you please tell me how to fix this? Thanks in advance.

    We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.
    Apple has started to get "tough" with hacked iPhones, & simply won't permit their activation.

Maybe you are looking for