Auto upgrades failing

First of all, we use the autoupdate functionality to upgrade our sensors. I have a test sensor that was upgraded to IPS-K9-min-5.1-1d (from 5.0.6) some time ago. I'm now trying to upgrade the signatures. It is not updating. Instead it seems it has been trying to re-apply the IPS-K9-min-5.1-1d upgrade over and over. I imagine it's been doing this since the upgrade. This is not the first time I've noticed this behavior. Is this a known bug?
evStatus: eventId=1147301912612292606 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:00 PM UTC offset=-300 timeZone=GMT-06:00
autoUpgradeServerCheck:
uri: scp://[email protected]//data1/edrm/test/sensorUpdates/
packageFileName: IPS-K9-min-5.1-1d.pkg
result: status=true
evStatus: eventId=1147301912612292610 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:04 PM UTC offset=-300 timeZone=GMT-06:00
downloadUpgradeFile:
uri: scp://[email protected]//data1/edrm/test/sensorUpdates/IPS-K9-min-5.1-1d.pkg
result: status=true
evStatus: eventId=1147301912612292611 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:04 PM UTC offset=-300 timeZone=GMT-06:00
softwareUpgradeInitiated:
description: Minor update initiated
upgradeName: IPS-K9-min-5.1-1d
oldVersion: IPS-K9-min-5
evStatus: eventId=1147301912612292619 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:38 PM UTC offset=-300 timeZone=GMT-06:00
softwareUpgradeCompleted:
description: Update completed with errors
upgradeName: n/a
oldVersion: n/a
newVersion: n/a
result: 5.1(1) is already installed on this system. status=false

Auto-download is not working for me either. It seems to be a server issue.

Similar Messages

AIR to auto upgrade to (native installer)

Hello,
The first application (released) was created in AIR now we want our exsting customer to auto upgrade to (native installer) to support few native process.
The AIR check for the new upgrade avaiable and downloads the new (native installer) from the server but fails to run the installer.
We have used NativeProcess to run the newly downloaded native installer. The logs shows that the nativeprocess is not supported.
The supportedProfiles is set to <supportedProfiles>extendedDesktop desktop</supportedProfiles>.
We had also tried using openWithDefaultApplication() function to run the nativeinstaller but with no success.
Thanks

Hello,
The first application (released) was created in AIR now we want our exsting customer to auto upgrade to (native installer) to support few native process.
The AIR check for the new upgrade avaiable and downloads the new (native installer) from the server but fails to run the installer.
We have used NativeProcess to run the newly downloaded native installer. The logs shows that the nativeprocess is not supported.
The supportedProfiles is set to <supportedProfiles>extendedDesktop desktop</supportedProfiles>.
We had also tried using openWithDefaultApplication() function to run the nativeinstaller but with no success.
Thanks

Ipad2 not able to auto upgrade

My Ipad 2 is an old version 4, Usually should be able to auto upgrade when click "General" we can see "upgrade" at right hand side or auto prompt out to ask for upgrade the latest version. But my Ipad don't appear any message ask for upgrade. I'm trying to used ITunes download but always failed to connect to "Devices" --> "Transfer Purchase" even i was sign in at "Store" to authorize this computer.

No point in issuing idle threats at a user to user help forum only.
Copied from this link.
http://www.apple.com/ipad/specs/
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.
Which are very "open" formats.
Does this particular video meets these specs?
This video was acquired where?
iTunes includes an option to create an iPad or Apple TV version. iTunes also includes - create an iPod or iPhone version for video acquired elsewhere that is not in a compatible format.
When I've used a 3rd party app to rip video that was acquired elsewhere which includes default iPod/iPhone/iPad/Apple TV settings, I've use the default Apple TV version which works on my Apple TV, iPhone, and iPad.

Flash Player Auto Upgrade ver 14, Won't Install: Error- Unable to Register

The Flash Player Upgrade attempted to install but stopped and gave me an error: Unable to Register. I have been all through the forums and I believe I have tried everything suggested. These have been my attemptsOS - Windows XP Pro, latest updates loaded.
1- I read a suggestion to attempt a "clean install" . I watched the YOUTUBE video that was on the page and followed it exactly. Attempted to re-install ver 14, and recieved the same error. this is the link to the page I followed: Can not install Adobe Flash Player. Error messages are "Failed to - Microsoft Community
2- I also downloaded the SubInACL file and the reset_fp10.zip file, followed the instructions and ran the file. Attempted to re-install ver 14 and got the same error, unable/failed to register.
3- I have attempted this numerous ways, rebooting the computer in between each change, re-booting after I did all, and nothing seems to work.
4- Downloaded Mozilla Firefox at someones suggestion, attempted to download and install, still the same error.
5- When I open AOL, it attempts to install Flash Runtime and the same thing happens. Error, Failed to Register.
6- Purchased a Registry Editor/Cleaner. Ran this cleaner and it did speed up my computer. Did clean uninstall of Flash Player making sure no files were on my computer. Same error.
7- Finally, contacted Adobe by phone. The tell me they can help and try to fix the problem, but it will cost me $39.95 per instance. And, I didn't get any warm feeling that there was a gaurantee that they could fix it. In fact, i could hardly understand the indian speaking tech support.
8- I also was told that after 1pm EDT, the new Adobe help page would be up and there would be a fix on it. Now, 3:20 EDT, and the page is still not up.
Anyone have any suggestions to fix this. I want to avoud the "F" word ,,, Format and re-install from scratch just to get this fixed.

I'm using WinXP (Home Edition) with Service Pack 3, and IE ver 8. When I tried the auto upgrade to Ver 14, I got the same results as you -- "failed to register". What tickes me off the most is that the auto upgrade deleted the previous version of FlashPlayer that worked fine. Now I get no flash content using IE8,
Like you, I tried to install a previous version of FlashPlayer and got the idotic response "you need to install the latest version, Ver 14" which caused all the problems.
Maybe the brainworks at Adobe can develop a fix soon.
If not, I will never install another Adobe product on my newer Win8 computer.

Where can i download the Auto Upgrade Utility?

I can't find it anywhere on your site. Im trying to upgrade the firmware of my WRT54GS since its power LED keeps on blinking. I'm trying to do the instructions on this link http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=175&p_created=1084205858&p_sid=btIGUT4i&p_accessibility=0&p_lva=703&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9Mjc1JnBfcHJvZHM9MCZwX2NhdHM9JnBfcHY9JnBfY3Y9Jn but i can't continue because i don't have the Auto Upgrade Utility. please help. thanks in advance.

I had the same problem, and followed the instructions as provided in several posts on the internet, without much help. Main problem was that I could not find the Auto Upgrade Utility or TFTP.EXE anywhere on the Linksys website, although I tried to use TFTP in Windows XP Pro. It did not work; the result was Successfully transerred 311 bytes, although the file was 2.99MB in size.
I called Linksys Tech Support and got a patient chap who didn't just tell me to go buy a new router, but knew what I was looking for. The first chap hung up on me, because he didn't seem to know much more than what he was seeing on his screen prompts, which basically got him to: "Buy a new router!"
The Auto Upgrade Utility can be located by going to the donwload page for the BEFW11S4 download page (http://www.linksysbycisco.com/US/en/support/BEFW11S4/download) and selecting the v3.2 hardware, as this is the only one that displays the very particular Setup Wizard link for download; someone should lose their head over this one! Why don't they just document this. The filename is BEFW11S4-v2_SetupWizard.exe (aka the Auto Upgrade Utility). Safe it to a folder on your hard drive.
Once you have downloaded the utility and the latest firmware bin file for your router (preferably in the same folder), use these brief insstructions/tips to upgrade the router:
Connect via an Ethernet cable to one of the router's LAN ports (not Internet/WAN port) at 10 or 100 MB/s, half-duplex; slower the better, but it worked at 100 MB/s for me. Use a static IP address such as 192.168.1.101 for your computer.
Make sure you can ping the router from the command prompt (ping 192.168.1.1).
Reboot the router.
Run the utility, and use Server: 192.168.1.1, Password: admin, and locate the firmware bin File from the earlier download.
Again, ping the router from the command prompt, just to make sure it is still connecting and not timing out.
Click Upgrade. If all is well, the router will be upgraded without a problem.
IMPORTANT: Give the router a couple of minutes to reboot and settle down. When I upgraded the first time, the power light was still flashing and I (and the Linksys technician) thought it had failed and unplugged the router to see if a reboot would solve the problem. It did not. I repeated the steps, and this time I waited a couple of minutes, and voila(!) the power light became steady and the router worked like it was brand new again!
Hope this helps. Locating the Auto Upgrade Utility was the key to solving this problem for me.
Suny

IPS Auto Update failing

I've configured the signature auto update via the GUI and CLI but receive the same error:
evError: eventId=1210198298109812431 vendor=Cisco severity=error
originator:
hostId: LON-Sensor
appName: mainApp
appInstanceId: 341
time: Jun 06, 2008 03:00:07 UTC offset=60 timeZone=BST
errorMessage: MainApplication::downloadAndStartUpdate Error status returned with status str Found name=errSystemError
Any ideas? I've rebooted both the IPS & ASA in the hope that would resolve the problem to no avail. I have another ASA/IPS in a different site and that works ok.

Hi, I got the information :)
show stat host
General Statistics
Last Change To Host Config (UTC) = 14-Jan-2009 14:38:43
Command Control Port Device = GigabitEthernet0/0
Network Statistics
= ge0_0 Link encap:Ethernet HWaddr 00:13:C4:80:C3:C1
= inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
= UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
= RX packets:25375769 errors:0 dropped:0 overruns:0 frame:0
= TX packets:2411636 errors:0 dropped:0 overruns:0 carrier:0
= collisions:0 txqueuelen:1000
= RX bytes:2570835196 (2.3 GiB) TX bytes:657595036 (627.1 MiB)
= Base address:0xbc00 Memory:f8200000-f8220000
NTP Statistics
status = Not applicable
Memory Usage
usedBytes = 660455424
freeBytes = 372043776
totalBytes = 1032499200
CPU Statistics
Usage over last 5 seconds = 31
Usage over last minute = 40
Usage over last 5 minutes = 36
Memory Statistics
Memory usage (bytes) = 660455424
Memory free (bytes) = 372043776
Auto Update Statistics
lastDirectoryReadAttempt = 08:40:00 GMT-06:00 Wed Feb 04 2009
= Read directory: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
= Error: AutoUpdate exception: HTTP connection failed [1,111]
lastDownloadAttempt = N/A
lastInstallAttempt = N/A
nextAttempt = 08:40:00 GMT-06:00 Thu Feb 05 2009
Auxilliary Processors Installed.
! Current configuration last modified Mon Jan 19 17:15:14 2009
! Version 6.2(1)
! Host:
! Realm Keys key1.0
! Signature Definition:
! Signature Update S379.0 2009-01-30
! Virus Update V1.4 2007-03-02
service interface
exit
service authentication
exit
service event-action-rules rules0
overrides deny-attacker-inline
override-item-status Enabled
risk-rating-range 90-100
exit
exit
service host
network-settings
host-ip 192.168.1.11/24,192.168.1.1
host-name sensor
telnet-option disabled
access-list 10.254.254.0/24
access-list 192.168.1.0/24
exit
time-zone-settings
offset -360
standard-time-zone-name GMT-06:00
exit
auto-upgrade
cisco-server enabled
schedule-option calendar-schedule
times-of-day 08:40:00
days-of-week monday
days-of-week tuesday
days-of-week wednesday
days-of-week thursday
exit
user-name ********
password ********
cisco-url https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
exit
exit
exit
service logger
exit
service network-access
exit
service notification
exit
service signature-definition sig0
signatures 9430 1
status
enabled true
exit
exit
signatures 11018 1
status
enabled true
exit
exit
signatures 12000 0
status
enabled true
exit
exit
signatures 12003 0
status
enabled false
exit
exit
signatures 12020 0
status
enabled true
exit
exit
exit
service ssh-known-hosts
exit
service trusted-certificates
exit
service web-server
exit
service anomaly-detection ad0
exit
service external-product-interface
exit
service health-monitor
memory-usage-policy
enable true
exit
exit
service analysis-engine
virtual-sensor vs0
physical-interface GigabitEthernet0/1
exit
exit

3rd Party auto-updates fail

I'm having a problem where seemingly all 3rd party software auto-updates fail.
The scenario is:
* I'm using a 3rd party
* I receive a prompt from the application to download and install a new version of the application
* I click Install Now and the application downloads the new version in the background
* When the download completes, I get an error that the update failed
Looking at Console for error logs, I get the following messages:
pixelmator - "env: hdiutil: No such file or directory"
transmission - "env: hdiutil: No such file or directory"
adium - "MD5 verification of the update archive failed."
fluid - "sh: ditto: command not found" and then "The update archive didn't contain an application with the proper name: Fluid.app. Remember, the updated app's fluid name must be identical to {CFBundleName}.app"
fluid - also displays a dialog box after failure saying that the Application directory is not writable.
I can download the app manually and install it without any problem, however.
I have tried verifying and repairing disk permissions, as well as rebooting my system.
Running Software Update appears to work fine.
Does anyone have suggestions on how I can troubleshoot this issue?

I've done a bit more testing since I originally posted about my problem:
* I've upgraded to 10.5.3
* I've tried resetting my user profile permissions from my 10.5 install DVD
* I've tried reproducing the error from a new user profile.
The interesting thing is that I CAN'T duplicate this error from a new profile. Short of moving everything to a new profile, is there anything else I can do?

Help needed: iPhone 4 software upgrade failed many times

Hello. I've bought an iPhone 4, which its operating system is 4.3, and was prompt by iTunes about this iPhone 4 software upgrade to iOS 4.3.5. I've downloaded the software and waiting for quite some time and after the dowloading has completed, the file will be processed. After processing, there is a popup saying that somehow the software upgrade failed and said something like make sure that your connection is correct etc. Do you have any idea on how to solve this issue?
Help me, please. Thank you very much.

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Diasble your firewall/security software and try again.

Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
             -1: 'startsap.exe' returned an error
             See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
     msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
     disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
     igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
     shared lib "dw_xml.dll" version 150 successfully loaded
     shared lib "dw_xtc.dll" version 150 successfully loaded
     shared lib "dw_stl.dll" version 150 successfully loaded
     shared lib "dw_gui.dll" version 150 successfully loaded
     shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01                      <
DpShMCreate: sizeof(wp_adm)          22968     (1044)
DpShMCreate: sizeof(tm_adm)          3642120     (18120)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Apr 02 11:53:30 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6916 Ended         no      1   0        0
1 DIA     7724 Ended         no      1   0        0
2 DIA     6044 Ended         no      1   0        0
3 DIA     4300 Ended         no      1   0        0
4 DIA     6992 Ended         no      1   0        0
5 DIA     2412 Ended         no      1   0        0
6 DIA      432 Ended         no      1   0        0
7 DIA     8168 Ended         no      1   0        0
8 DIA     5420 Ended         no      1   0        0
9 DIA     9712 Ended         no      1   0        0
10 UPD     4320 Ended         no      1   0        0
11 ENQ     3476 Ended         no      1   0        0
12 BTC     2676 Ended         no      1   0        0
13 BTC     6816 Ended         no      1   0        0
14 BTC     9636 Ended         no      1   0        0
15 BTC     8356 Ended         no      1   0        0
16 BTC     7004 Ended         no      1   0        0
17 BTC     7284 Ended         no      1   0        0
18 BTC    10048 Ended         no      1   0        0
19 BTC     4560 Ended         no      1   0        0
20 BTC     4196 Ended         no      1   0        0
21 SPO     4268 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          7
wake_evt_udp_now     0
wake events           total     3, udp     3 (100%), shm     0 ( 0%)
since last update     total     3, udp     3 (100%), shm     0 ( 0%)
Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
Vadi

Hi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi

SCSM 2010 to 2012 Management server upgrade failed

I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.C

Jeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb

CUCM 8.6.2 to 9.1.2 Upgrade fails

I am trying to complete an upgrade of CUCM 8.6.2 to 9.1.2 however the upgrade fails at the very end - I have attempted this 4 times in various different ways from using SFTP to local media I get the following error;
HWModel=7835I3
CPUCount=1
CPUType= Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
CPUSpeed=2000
MEMSize=4096
BIOSVer=IBMCorp. -[D6E150CUS-1.11]- 02/08/2011
ObjectId=1.3.6.1.4.1.9.1.585
OSVersion=UCOS 5.0.0.0-2
SerialNumber= ********
VendorOID=1.3.6.1.4.1.2]|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleaning up download...|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
05/17/2014 13:54:51 upgrade_install.sh|Removing /common/download/9.1.2.10000-28>
05/17/2014 13:54:51 upgrade_install.sh|Started auditd...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::>
05/17/2014 13:54:52 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000>
05/17/2014 13:55:02 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade>
05/17/2014 13:55:02 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock >
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_in_progress: Already locked b>
05/17/2014 13:55:02 upgrade_install.sh|release_upgrade_lock: Releasing lock (pi>
Installation of UCSInstall_UCOS_9.1.2.10000-28.sgn.iso failed
An unknown error occurred while accessing the upgrade file.
A system reboot is required when the upgrade process completes or is canceled. .
I have previously used this ISO for other clients without an issue and have checked the MD5 is correct
Has anyone else experienced this issue?
Thanks,
Richard

We have got this resolved, after raising a case with TAC they identified that we were hitting the following bug;
CSCub53409
The detail on the bug is very limited but in our case it was caused by an issue with the numbering plan, GBNB 1.1(21) - we upgraded to the latest version 1.1(29) and the upgrade has now completed.

Repository upgrade fails 11.1.0.7 db -10.2.0.5 GC patchset

Installing GridControl 10.2.0.5 on Windows 2003 Server SP2. Initial install successful of 10.2.0.2 using existing database 11.1.0.7. The database was created new to use for GC. Patchset no problems until Configuration Assitant step "Repository Upgrade" failed with errors:
rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
oracle.sysman.emcp.aggregates.ConfigPlugIn
oracle.sysman.emcp.oms.StartOMS -configureOms
oracle.sysman.emcp.oms.EMCLISetup
oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
oracle.sysman.ccr.configCCR.ConfigRepeaterPlugIn
Tried to find cause of errors and cannot seem to understand why this step failed.
Considering uninstalling GC and Oracle 11g and reinstalling GC with "new database" option.
Anyone successful at installing GC 10.2.0.5 with an 11g database?
Thank you,
Curt Swartzlander
DBA

pasinc wrote:
Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

On Windows 7 PC, got the "upgrade iTunes" notice, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"

On Windows 7 PC, got the "upgrade iTunes" notice this morning, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"
I wasn't paying attention so I don't know the precise error I got on the upgrade failure.
All other iTunes upgrades have been fine...no brainers. Done several on this W7 PC.
If I re-download and install a fresh iTunes I assume I will lose my library...true? Can I find and save off my library so I don't have to "discover" all my music which is scattered all over the PC and a 1T attached USB drive.
Or is there some way to get the iTunes upgrade to successfully restart and install correctly?
Help!

Hello there, Konami84.
The following Knowledge Base article provides some recomendations for troubleshooting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

SCOM 2012 R2 agent upgrade fails crippling agents

Running into a large amount of SCOM agents that are failing the upgrade from 2012 SP1 to R2 and would appreciate any feedback from my SCOM community colleagues. Warning this issue is not for the faint of heart.
Plan:
I am in the process of upgrading 1900 manually installed SCOM 2012 SP1 agents to R2. I am using SCCM to deliver the upgrade using the standard sanctioned upgrade parameters.
Momagent.msi /qn /l*v %SystemDrive%\SCOM2012AgentUpgrade.log AcceptEndUserLicenseAgreement=1
Problem:
I have run into a problem where on a larger group of systems, 165 servers, where the upgrade fails and leaves the agent in a crippled state. At this point the agent cannot be removed cleanly via add remove, nor can a straight install of the agent
be done. What is required is a manual removal of registry keys and then a clean install of the agent can be performed to remediate. This is no problem and I am able to do this. (Note: all other methods of agent removal did not work ie:
Cleanmom.exe utility or add remove)
Task:
Seeing that we need to do agent upgrades in the future it would be great to know why this happened so we can plan for this in the future.
Notes:
Seems like a random sample of servers (2003/2008) with different applications running on them so that doesn't help in narrowing things down.
Looking at the MSI log, I see a common issue among systems that had this problem.
******* Product: {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'DisableMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Looking for sourcelist for product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Adding {387306D9-78CE-4E0E-B952-28A50CC8B3EE}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Now checking product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media is enabled for product.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Trying source C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 2203 2: C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\MOMAgent.msi 3: -2147287037
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing net source list.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing media source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 2203 2: 3: -2147287037
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Processing URL source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Failed to resolve source
MSI (s) (7C:8C) [08:08:44:744]: Note: 1: 1714 2: Microsoft Monitoring Agent 3: 1612
CustomAction returned actual error code 1612 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (7C:8C) [08:08:44:744]: Product: Microsoft Monitoring Agent -- Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Action ended 8:08:44: RemoveExistingProducts. Return value 3.
Action ended 8:08:44: INSTALL. Return value 3.
Ok so the obvious is that the installer is looking for original source installation files and not able to find them. What is surprising to me however is that the product references a 32 bit scom agent guid
387306D9-78CE-4E0E-B952-28A50CC8B3EE, however this is a 64 bit machine. Our build process dictates that a 64 bit machine only receive a 64 bit SCOM agent.
Doing a search on this product guid I realized I skipped some other references at the top of the MSI log that might offer some more explanation...
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_OM12_SP1_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Modifying OM_OM12_SP1_AGENT_FOUND property. Its current value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'. Its new value: '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_OM_AGENT_FOUND
Action ended 8:08:11: FindRelatedProducts. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_OM_AGENT_FOUND.
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_MOMV3_AGENT_FOUND
Action ended 8:08:11: _Set_OM_AGENT_FOUND. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding MOMV3_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_MOMV3_AGENT_FOUND.
Well that is interesting, seems to me that in the first line the MSI installer reads the OM_OM12_SP1_AGENT_FOUND property and identifies this with a 64 bit agent guid (8B21425D-02F3-4B80-88CE-8F79B320D330), but then appends
the 32 bit guid at the end (387306D9-78CE-4E0E-B952-28A50CC8B3EE). This is the point of my confusion and my suspicion as the cause of the problem I am having.
Concluding thoughts:
Why does the installer seems to first recognizes a 64 bit agent, but then later changes it's property to include a 32 bit agent guid.  Could a 32 bit agent have got on this 64 bit server based on the details of this log? Would this
cause my agents to fail the upgrade? I think so, but looking to bounce this over to another fellow SCOM colleague who may have wrestled with this before.
Thanks in advance if you took the time to read this and think about it. Extra points if you have any extra thoughts!
Keith

Hi,
Have you used Requirement to limit the platform when you deploy application with SCCM.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Auto upgrades failing

Similar Messages

Maybe you are looking for