Auto vendor block for procurement

Hi All,
I want to automatically block the vendor for procurement based on the rejection caused by the vendor. e.g. if material from that vendor is rejected 3 times then system should automatically block the vendor for procurement. Please suggest some possible solution.
Regards,
Amol

Dear,
Please check about Vendor Quality Scoring by which if vendor short falls in quality scoring against defined score, the vendor will be rejected automatically through inspection.
http://help.sap.com/saphelp_46c/helpdata/es/69/e72c7dd435d1118b3f0060b03ca329/content.htm
Quality Score Calculation?
Regards,
Syed Hussain.

Similar Messages

  • Vendor Blocked for Local Purchase Organization

    Hi,
    I have checked the vendor details in SRM and ECC. The vendor is not locked in SRM & ECC, still the User is getting the Error message that Vendor Blocked for Local Purchase Organization.
    Please suggest.
    Regards,
    Lovkesh

    Hello,
    To prevent a shopping cart being created with blocked vendors, you shall
    make an implementation in BBP_DOC_CHECK_BADI. This badi is called for
    each refresh of ITS screen. Here
    Call FM BBP_ITEM_GETDETAIL by supplying IV_DOC_GUID
    The FM will return among others a table E_PARTNER.
    select  the corresponding partner related to E_PARTNER from table BUT000
    Check weather the BUT000-XBLCK and E_PARTNER are matching
    If yes, Fill ET_MESSAGES with an error message.
    I hope this information help.
    Thanks and regards,
    Gaurav

  • Vendor Blocked for posting

    Hi Freinds,
    Vendor exists in two company codes A and B.
    Vendor is blocked for posting only in Company A. But when try to clear open items in Company B via F-44, Error saying Vendor is blocked in company A.
    As we dont have any open items and in F-44 we entered company B, Why does system still cheks Blocking indicator for other company code?
    Thanks,
    Edited by: Balajiblessed on Feb 1, 2011 6:19 AM

    Hi,
    Use T.Code: FK05 / Xk05 and Give Vendor (dont give Comp Code) and press enter from next screen you De - select All Company Codes Check Box.
    Regards
    Viswa

  • Vendor blocked for Purchasing Organisation

    Experts,
    SRM 7.0/ECC 6 (Ext classic)
    User created SC and local PO was created but this PO was not transferred to ECC.
    When I tried to retransfer this via SE37, RZ20 error shows "Vendor 1000 blocked for Purch Org XXX". Now the shocking finding is that this vendor i.e. 1000 is nowhere used in my PO.!! Vendor in my PO is 2000. Why is system linking a different vendor with this PO....as a result ECC PO is not getting created.
    Any SAP notes for this...looks like an SAP bug.
    Thanks

    Hi Sachin,
    I checked the same. Under 'Partner data' tab for vendor 2000, vendor 2000 is only maintained and same is the case for vendor 1000 as well.
    Also vendor 1000 is blocked for Purch org, but why is system picking 1000 instead of 2000 for a PO which is using vendor 2000?
    Anyway I can debug this??
    Thanks

  • Material Block For Procurement

    Hi Experts,
    Here we have one requirement to block material for procurement only.
    Stock at Plant should be process in normal for issue and consumption .
    In MRP 1 view i tried with Plant-sp.matl status as 01 but it block the material for procurement as well warehose movements too.
    It is very urgent.
    Thanks in advance
    Chetan Mistry

    Dear Vishal,
    There is only three types are there as below
    01     Blocked for procment/whse
    02     Blocked for task list/BOM
    99     Complete Block
    How can i config new option for material block for payment only.
    Thanks
    Chetan Mistry

  • VENDOR BLOCK FOR PO,GRN & INVOICE

    Hi All,
    We want to block vendors for Purchasing ,GRN ( Old PO) & INVOICE
    We have done the setting in XK05 for the vendor Posting Block for all company code & purchasing block for all purchasing organisation & block function Total block
    Now it is not allowing us to make PO , but GRN is stilll possible for old PO.
    How to restict the same ?
    Thanks in advance.
    Rajesh

    hi,
    You can block the vendor from:
    1. VMR
    2. Source list....
    If the PO is not getting generated then how the GR and IR will be made....pls check...
    This is possible before making the PO....otherwise the system will allow to post the GR for the existing PO.....
    If you want you can archive the PO or delete the old PO by deleting the line items...
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Sep 24, 2008 11:09 AM

  • Vendor Block for payment.

    Hello Experts :
       We are migrating vendor from one SAP to Another SAP system .But we are doing payment and clearing in source SAP system and like to block all vendor for payment in target system how can I do this. For migrating we are using Interface.Can we do any setup in Interface that say block vendor for payment or we have to do configuration in target system to block vendor for payment ?

    Hi
    You can block the payment to vendor in mass by using xk99, where select table-vendor master company code LFB1 & select field payment block-LFB1-ZAHLS, then execute, then select the vendors & company code & again execute - then you can select the payment block in new values & select carryout a mass change button & execute

  • Vendor blocking for specfic materilas

    Hi,
    Can someone explain me how to block a vendor from purchasing certain materials. MRP should also take this into account.

    HI
    try to block in source list
    ME01,here give material number and plant,,after executing give vendor number and there is one indicator block source ticked it
    Regards
    Kailas Ugale

  • Block article for procurement not for STO

    Hi
    We want to discontinue a particular article, but we have stock of this article in Distribution Center.
    How can we prevent this article for external procurement and at the same time we want to send this article to store for sale using stock transfer order.
    I have tried with X-site status as blocked for procurement, system is not allowing me for external procurement but it is also not allowing me to make STO.
    I want STO to happen not procurement. How?
    Thanks
    Manoj

    Hi Manoj,
    When you use X-Site status in (Basic View) Article Master, You can use this field depending upon your business requirements;
    01     Blocked for procment/whse
    02     Blocked for task list/BOM
    03     Blocked for procurement
    Bye,
    Muralidhara

  • Frieght requires separate dept and blocked for payment when frieght invoice

    Hi Gurus,
    For frieght handling seperate department is maintained and separate approval is required, when ever the frieght invoices comes it has to get blocked for payment automatically. Can any one provide the solution.
    Regards,
    Hariprasad.G

    Hi,
    I thought create a separate cost center and create service PO, maintain the vendor blocked for payment at the time of vendor creation, then do the service entry sheet, and Invoice.
    The above said solution weather i have to create separate Pricing procedure and which conditon I have to use?
    Regards,
    Hariprasad

  • Payment block for vendor  based on value.

    Hi Friends,
    Is there any way to set like,
    If the payment is >$5000 for vendor 100100, Invoice must be blocked for payment automatically.
    If the payment is <$5000, Invoice should not block for payment.
    Best regards,
    RAMAN.

    Hi,
    Unfortunately this is not standard SAP.
    There are Vendor specific tolerances but these are not set upper value limits, they are tolerance ranges for value and so do not do what you are asking for.
    There are also value tolerances that can be used to block all invoices over a certain value, but these are not vendor specific.
    So if you REALLY MUST have this then a user exit or modification would be required.
    Or set the payment block on the vendor and block ALL invoices and then release the lower value ones (manually) and leave the others blocked until you want them to be paid?
    Sorry that there is no SAP solution for this via config.
    Steve B

  • Payment block for vendor payment

    i blocked a vendor invoice for payment, it's shows the error msg correctly as item blocked for payment in the proposal log but when i do manual payment via F-53 , the paid document is being generated for excatly the same vendor and the same blocked invoice.
    kindly assist.
    thanks.

    Hi
    Go to OB27 and check whether the block has a tick for manual payment block also. If there is no tick then the system accepts the block only for payment proposal but it allows the manual payment.
    This will solve your issue.
    Regards
    Jyostna

  • Blocking Vendor only for Payment( MIRO)

    Dear All,
    Can anyone help me in Blocking a vendor for only Payment.I have checked below cases from end but it is not working.
    1. I have gone to vendor master - XK02, then Payment Transaction and then selected Payment Block as "A" ie., Blocked for Payment"/
    2.I have done MIGO and have gone to MIRO to do IV for the existing PO, if i checked here the Payment Block is not reflecting, it is allowing to post the document with  pmnt block"Free of Payment".
    *3.Also to check one more case have created a new PO and done GRN, aftewards try to do MIRO still the payment block showing as "Free of Payment" which is not mentioned in Vendor master
    Please help me out how to block this vendor for payment by updating some master data.
    >>> Though I have selcted as Blocked For Payment in vendor master why system is considering other Blocked indicator.
    >>> How to block the vendor for payment.
    Regards,
    Nagaraj S
    Edited by: Nagaraj  S on Aug 23, 2010 11:18 AM

    Hi,
    See the below help document..it says it will not refelect in manual payment.
    The block key in the document will affect manual payments only if you have selected the Blocked for manual payments option for the block key. The block key you set in the master record has no effect on manual payments. However, it is possible to make system settings so that a warning is shown, explaining that this is the case. You do so by customizing message 671 in work area F5 in the message control.
    thanks

  • System message:Procurement of material&blocked for quality reasons(0006 883

    Hi Greetings!
    I have the following issue.
    I need to make the message "Procurement of material & blocked for quality reasons" as Error message . Message number - 00 06 883.
    This will not allow to create PO , if the "Blocking Function" - 02 "Block Request and Purchase order " is set in the QM info record.
    Even though i ahve set this message as "Error" in the configuration ( Materials Management --> Purchasing --> Define Attributes of System Messages), i am getting only warning message during PO creation.
    Can you please let me know if am missing any setting.
    Gobinathan G

    Dear sir,
    GO to material master of that item go to .. PURCHASING VIEW there is a Plant specific material status chk if that is 01- blocked for production 02- blocked for BOM chk and change it then system will allow you to purchase the parts.
    Kaustubh

  • Block vendor only for po

    Hi All,
        We want to block vendors only for purchasing that means user should be able to create RFQ but he should not be able to create PO for that vendor. How to do this?
    Thanks in advance.
    Pavan

    Hi Pavan,
    Go to MK05, Enter Vendor / Purchase Orgn and there is a Tab called Block for Quality Reasons.
    Select Only the Block function 01 Lock the Purchase order.
    Eventhough If you are not able to do RFQ. Go to OQB3 and select the reason and choose your reason suppose 01 uncheck all the options expect for Purchase order and save.
    Surely this would resolve your thread.
    Revert back in case not solved.
    Reg,
    Ashok
    Rewards Welcome

Maybe you are looking for