Auto Video playback after Slideshow Times Out

I am trying to figure out how to create a Self-running Kiosk program that when it times out goes to the first slide and plays a looping video. However, when I run it, it goes to the first slide and holds. It does not begin to play the video. I've created a build of Start Movie that begins after transition, but that just won't work.
Any ideas?

It's most definitely a bug. I created a slide with animated text only and that would play. It doesn't seem to work. And I know it worked in the past because I did the exact same thing with the previous version of Keynote for a show we did in Seattle.
Sigh. Let's see if this will ever get fixed.
Steve

Similar Messages

Slow video playback after reinstalling Geforce2 MX card

Ok, reinstalled (took out the 9200 card) my Geforce2Mx card and now everything is in super slow motion - video, scrolling, typing, opening and closing of apps, pull down menus, loading of web pages - everything. It's like being back on an old SE30 and now even that seems fast to what is happening now. What did I do wrong? Tried rebooting a few times and resetting pram with no better results.
G4 Mac OS X (10.3.9)
Posts: 536
From: Vancouver, Canada
Registered: Dec 30, 2005
Re: Slow video playback after upgrading to ati 9200 card
Posted: Apr 10, 2006 11:56 PM
in response to: G J
Press the button near the battery on your logic board, it will reset the PMU, which might help.
Gigabit Ethernet G4 upgraded 1.2Ghz, 120GB HD, 10GB HD, 1GB RAM Mac OS X (10.4.6) ibook G4 1.42Ghz, 80GB HD, 786 MB RAM, 1GB iPod Shuffle
Tried that also with no results. Also repaired permissions. What could have happened to the machine to do that?
G4 Mac OS X (10.3.9)

Installed the modified Radeon ATI 9600 Pro for G5 Edition card and I still have the same slow video playback results. However when I boot up from another internal hard drive I do not have the video problems. Everything works just fine. Both of my hard drives had no video problems before screwing around with the ATI cards and now the one still has the problems with the video playback. This one also has Classic on it and Classic also runs slow. BTW I don't know if this has anything to do with it but when I ran a search result for "ATI" no files are installed on that 2nd hard drive which is playing video and loading pages with no problems. Would trashing all those ATI files on the slow drive do anything to help? Or is this just a coincidence?

'Rocky' video playback in Slideshow mode (update does not help)

After importing a video clip in Aperture everything is ok. I can play it back etc and everything goes smooth. However as soon as I add this clip in a slideshow and try to play it, it's goes very rocky/jumpy skipping frames.
What I want is the following: I want to add some videoclips from my wedding into the picture slideshow. I (unfortunately) only have a DVD (no original files). So I ripped the dvd with MPEG Streamclip as DV stream. Then loaded it into iMovie and exporting clips from there to use in aperture slideshow. If've tried out many codecs now, but nothing seems to really work. I have the feeling that larger files (dv, or avi) do it a bit better.
These movies play perfect in any other player and quickview.
What would be the best way to get clips from the DVD in a photo slideshow? Is there a certain codec I should use? etc.
I updated to 3.0.1 and only after that I installed the update for playback video in the slideshow (because I run into this problem)

Hello Walter,
The are are many things to consider because there is probably a mismatch between your photos and your movie concerning size and quality.
Movies on a DVD will normally be Standard Definition, either in 4:3 ratio (old TV) or in modern widescreen 16:9 ratio. So you may just want to continue with Standard Definition, therefore SHARE your project to iDVD.
You need to consider the possibility of cropping your images to match the movie otherwise if the movie is 4:3 and the photos are 16:9 or 6:4 the movie will have a different screen size to your photos. Not all images can be cropped pleasingly in 4:3 so you may be forced to use another ratio or the original, in which case you movie will be different.
If you have Apple TV, or wish to view the final result on your computer screen you could try the SHARE to Apple TV option as that should result in better slideshow quality but probably not improve the movie quality. You will have to test this as I have no personal experience to draw upon.
Using the preset SHARE options is far easier than Exporting via Quick Time where you have to specify many parameters including output pixel dimensions.
Hoping you have success.
AW

Video Playback After 3.1.2 Update

I have recently updated to 3.1.2 and now find that some videos, that played perfectly well before the update, are now pixelated and of a considerably lesser standard.
Is anyone else aware of this issue and is there any way around it?
Thanks in advance.

Your suggestion to reset and restore is much appreciated.
However, I wouldn't have labelled the video playback issue a bug before trying something so basic.
To review, just like to person who began this thread, when playing back videos on my 2G iPod touch using OS 3.1.2, any attempt to summon the video controls, after about the first 10 seconds of playback, does not work. The iPod offers no response to any gestures on the screen.
That the iPod's behavior (a) was not observed before the current OS, (b) has been experienced by other users with the same hardware and firmware combination, and (c) continues no matter how many times I reset and restore the device, sounds very much like a bug to me.
My apologies if I offended anyone with the question I posed at the end of my previous post, but it does seem that, in their rush to get stuff out to us, high-visibility glitches like this are becoming more frequent. Perhaps, with our ridiculously high expectations of Apple, we are in part to blame.

Program Monitor is Black, no video playback after installing new graphics card

I bought a PNY Nvidia Quadro 2000 graphics card a few days ago, and since it's been installed, I've been unable to watch video playback in my program, source or even reference monitor.
Similarly, If I designate one of my monitors soley for video playback, the screen is just black, and as the timecode advances on my timeline I only hear sound.
My project is using "Mercury Playback Engine GPU Acceleration" for Premiere Pro CS6.0.1
I went from using one graphics card to using two graphics cards, and installed a third monitor. I've spent the last few days trying everything I could think of, I even uninstalled and re-installed premiere.
Hardware Specs:
Windows 7 Ultimate (64-bit)
HP Pavilion h8-1230z
AMD-FX8150 3.59Ghz 8 core processesor
16GB RAM
600W PS
EVGA Nvidia GeForce GTX 550Ti
PNY Nvidia Quadro 2000
I am using a PCI x16 for the Quadro 2000
I am using a PCI x1 slot w/x1-x16 adapter for the 550Ti
Could this be the problem?
Additional Information
Vectorscope, All scopes, YC Waveform - Display modes all work.
I downloaded the most recent Nvidia drivers for both of my cards.
I haven't received any error messages or had any problems in After Effects CS6, as video playback is working properly in my other adobe applications.

I am still building a new system, so currently I'm still using a 480. You can read all about my choices and progress here: Adobe Forums: Planning / building a new system. Part 1
There are 11 entries in the Benchmark Results that succesfully use the GTX 680, even though it is not 'supported'. They all use the 'hack'. However, the 680 has been added to the list of supported cards for AE, so it is only a matter of time before the 680 will be added to the list of supported cards for PR. Todd had made that clear. Now, when the 680 is added, it makes sense that the 670 will also be added. My guess is that both will be added in a short while.

WLS 8.1 SP5 Message bridge doesn't refresh connection after idle time out

Hi,
I am seeing in the log after enabling the debug flags that message bridge intermittently stops refreshing the connection without logging further info and causing a production failure.Bridge is forwarding the message from WLS 8.1..5 DQ to the remote MQ 6.0 queue.
Below is the snippet which doesn't come in the log which suggests that bridge stops refreshing the connection.
<BEA-200027> <Bridge "CASLDNSenderBridge" works in asynchronous mode and has not received messages for the predefined maximum idle time. The connections to the adapters will be interrupted and reestablished.>
The above message does appear everytime but intermittently it stops and the messages put after this leading to the exceptions.The bridge has been configured in asynchronous mode and the idle time out is configured as 60 secs.
Can somebody please let me know if there is any known issue with 8.1 SP5 where message bridge stops refreshing connection intermittently or how to debug this further.

I would normally suggest raising the issue with support, but I recall hearing that 8.1 is nearing the end of its support cycle, so I'm not sure that's an option for you. Other options:
- try upgrading to a newer SP, or better yet, a new version of WebLogic
- try changing to synchronous forwarding
- examine thread dumps from when the bridge appears to be stalled
- post the exception that bridge is throwing when it tries to connect
- try patching MQ (the problem could be on the MQ side, and perhaps an older version of the bridge may not be fully capable of handling all of MQs minor quirks)
- write a program to (A) detect inactivity on the src destination, and (B) somehow restart the bridge and/or all of WL when this occurs
Tom

Aperture issues with video playback in slideshow

I'm trying to add a few videos into a slideshow but seem to be hitting an issue with playback. The mpeg4 files play perfectly fine in my project folder but when I drag it into my slideshow I only hear the audio of the video, no picture. Anyone know what I'm doing wrong? I'm running Aperture 3.4.5

Sorry, that should read .mp4. Have also tried .MOV with no success in the playback of the slideshow.

No sound on any video playback after 5-10 seconds

The sound on my second generation ipad seems to disappear after 5-10 seconds of watching any video playback, although sound works when i stream to my apple TV so I'm assuming its the device that's problematic. Any suggestions on how to resolve this issue and get sound from the ipad would be greatly appreciated.

Perform a "reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem.

How to redirect page after session time out-Urgent

I want to redirect my page once the session time out..
plz let me knw its very urgent

HI
i too got the same problem. At present i fsession expires i'm farwarding it to Some general login page. But we've diffenternt employers with differnet login pages. How can i farward to login page wich the use entered in previously
For this i got one solution buti don't how to implement it.
After login page i'll send one value as parameter to Servelt controller.This value ,i append as query string to all requests which are going through the Servelt. And i'll retrive this value from the URL referal. whenever session expires i'm farwarding to some Session Expired JSP . There i want to check this varibale's and depanding on that i'l farward to particular login page.
This is in my mind . Can any help me how to Implement this.
Satya

Slow video playback after upgrading to ati 9200 card

Just upgraded my graphics card to the PCI ATI 9200 but now I have slower video playback than I had with the OEM Geforce AGP card. Does anyone know why this has happened? I thought I was gonna get better playback by upgrading
G4 Quicksilver 733 896mb ram Mac OS X (10.3.9)

Hi,
Well, you have me scratching my head, that's a real puzzle.
Try an Open Firmware re-set, do the 're-set all' procedure:
http://docs.info.apple.com/article.html?artnum=42642
BTW, ATI (and OWC) has just released this info on their 9600 video card, meaning it's not so good for G4's:
Knowledge Base
ATI Customer Care > Product Information > Specifications, Features, Comparisons >
737-21888: Radeon 9600 PRO PC & MAC Edition list of supported system configurations
The information in this article applies to the following configurations:
Radeon® 9600 PRO PC & MAC Edition
"Quicksilver" Power Mac G4 model
"Quicksilver 2002" Power Mac G4 model
"Digital Audio" Power Mac G4 model
The Radeon 9600 Mac & PC Edition is not compatible with the "Quicksilver", "Quicksilver 2002" or the "Digital Audio" PowerMac G4. If a Radeon 9600 Mac & PC Edition board is installed in one of these systems the result is a blank display.
For assistance in differentiating Power Mac G4 models, please refer to Apple Article 58418.
Regards,
Dave

G5 crashes during iTunes video playback after Leopard install

I have a G5 1.6 single-processor running 10.5.1. Since I installed Leopard, I have been experiences frequent crashes during iTunes video playback (TV shows bought in the iTunes store). The crashes hang my whole system and require a restart by holding down the power button. The video itself sort of "blip-blip-blips" during the crash, but the mouse and keyboard are unresponsive, windows don't do anything, etc.
Any thoughts? Anyone else with this problem? Thanks!

Ever since I installed Leopard on my dual 2ghz G5, neither itunes nor quicktime player works. They both crash on launch. Maybe not the same issue, but I'm regretting the upgrade.

Choppy iPhone video playback after upgrading to 10.5 + QuickTime 7.6.9

Hi,
I recently upgraded from 10.4 to 10.5 on my Powerbook G4. I used the "Archive and Install" option. After updating all software to the latest (10.5.8 OSX + 7.6.9 QuickTime), I noticed that the playback of the videos shot with my iPhone 3GS becomes extremely choppy (jumps combined with slow-mo). Based on the what's in "Previous System", I was using QT 7.6.4 with OS 10.4, which didn't have this playback issue.
I found several posts related to similar issues in the forum, and tried the following suggestions without success:
(1) removing all third party plug-ins from /Library/QuickTime;
(2) repair permissions with Disk Utility;
(3) installing Perian;
None of the above made a difference. Just for the heck of it, I tried "su" in Terminal and moved "QuickTimeH264.component" to "QuickTimeH264.component.bkp". Surprisingly this made the playback a lot better (all the iPhone clips are H264+ACC). So I'm guessing somehow the QT H264 component is not working properly for me, but what is QT using instead to play those videos after I renamed the component? It shouldn't be any of the third-party plug-ins since I tried removing all the third-party stuff at the same time, and the videos still played fine. I'd like to get to the bottom of this as I'm a little uneasy about re-naming the H264 component.
I hope someone more QT savvy can diagnose the problem based on what I've tried and make new suggestions. Granted my machine is a bit long in the tooth but it's still decently powered (1.67 GHz, 1.5 GB RAM, 320GB HDD) and the videos played fine before the "upgrade".
Is it worth doing a clean re-install of 10.5 as opposed to the "archive and install"? It's a pain obviously to have to re-install all the apps but I'm willing to try it if it could reasonably make a difference.
Thanks in advance!

The problem is that you moved your Mail application to a sub-folder in your Applications folder, and you are running an older copy of Mail.
From your crash report it shows your path is to a different folder then the default folder:
Path: /Applications/Mail Apps/Mail.app/Contents/MacOS/Mail
It also shows that you are not running the correct version of Mail (should be version 3.5 (930.3):
Version: 3.5 (929.4)
Check out this article:
http://support.apple.com/kb/TS2486
The short of it is that you may have two copies of Mail on your system. When 10.5.6 installed, it may not have updated Mail correctly. Look to see if you have another copy of Mail in your Applications folder, and if so run it and check it's version from the 'About Mail' menu option, it should be 3.5 (930.0). My recommendation is to remove any copy of mail that is not in /Applications (if there is no version of Mail in Applications, move the one you have in Mail Apps back) and run the Mail Update referenced in the article above.

Playback after slideshow is burned using iDVD produces random pauses

Every time I burn a slideshow project using iDVD, the playback, whether it be on the Mac or on a generic DVD player, produces a momentary pause somewhere. I burned the same project several times in order to pinpoint the error, however the pause does not occur at the same place. Any suggestions?

just to add to the already good advice above .....please also tell us what media you are currently burning to. I recommend Verbatim DVD-R Minus media.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Script or anything that will auto quit app after certain time of inactivity?

I am searching for a way to make apps auto quit after a certain time of inactivity.
For exmaple, if i open the app store, i would like it to close automatically after a certain amount of time, with the possibility of adding exceptions to the list.
Is this in any way possible?
Thanks/.

The above checks lsof every 30 seconds;
-) if it's been only inactive for half a second at exactly that point, it'll close it.
-) You can `while sleep 30;`
Systemd doesn't seem to have this exact behavior. Autofs does though, it has a timeout option. (Systemd's StopWhenUnneeded is for when services don't need it, and its timeout option is for how long to wait before giving up trying to mount it.)
Now I wonder if autofs can also trigger a command after unmounting...
Edit:
You can use the intofiy-tool's package's inotifywait to wait for an unmount event.
Last edited by Blµb (2014-03-14 09:52:59)

Jerky video playback after installing adobe flash player for forefox

I switched to Firefox the other day from MSIE. I immediately had problems with jerky / intermittemnt delivery of video training. I noted that one of the causes could be the adobe flash player so i uninstalled the windows one and installed the firefox plugin. This made no difference.
Can't readily see anything on Google that makes immediate sense.
Any ideas welcome. Thank you.

I uninstalled version 13 and installed the version 12 as they suggested. Did not work.
On my computer now I have three accounts.
1. Mine - Flash Player version 13 originally worked but after updating (as was suggested by onscreen prompt) it did not work with Safari. Uninstalling and reinstalling Flash Playaer version 12 also did not work.
2. Second computer user can still see CNN video clips in Safari. 'This user did NOT install the update to version 13.
3. Guest accoount still can see CNN video clips in Safari.
Any suggestions how to get back to the original configuration on my account. Unfortunately, I did not know about Time Machine and did not have it set up (have subsequently tried to set it up but cannot seem to be able to select a backup disk).
Any suggestions appreciated.

Auto Video playback after Slideshow Times Out

Similar Messages

Maybe you are looking for