Auto-will this apply lens profiles to all images in ACR when a profile exists

I would like to know if I hit "Auto" under the Lens Correction Tool in Adobe Camera Raw, will that then set up Adobe Camera Raw to apply a
lens correction profile to each image that I process, when such a lens profile is available in the database? I have read one or two threads on this topic and I am still not sure that "auto" does what I want, versus default; the situation becomes even trickier I think if you edit the settings below this tab, and want those choices to become a default. I am very confused by all the various "if you do this, then this will happen, but not if you set these to other choices, and so on".
Perhaps "Default" does what I want to have done? In any event, I would like to know which setting will do as above and apply a lens correction profile every time that one is available.
Thanks, Debra

Yes, if a profile can be found that matches, it will be applied, at 100% for all three sliders.
Conversely, if you for instance don't want your fisheye to be defished, you open an image taken with that lens, move the distortion slider to 0%, and save that as a new default. Now, "Auto" would put the distortion slider at 100% while Default will leave it at 0%.
If you don't make any changes to the standard settings and don't save any new defaults, they are both identical.
Hope this makes sense.

Similar Messages

I have emigrated from the UK to Australia and am about to change my itunes country. Will this result in me losing all my itunes downloaded songs etc? Will i need 2 accounts?

I have emigrated from the UK to Australia and am about to change my itunes country. Will this result in me losing all my itunes downloaded songs etc? Will i need 2 accounts?

Going on what other people have posted your purchases will disappear off the Purchased links for redownloading (they won't be removed from your iTunes library or iOS devices), but as long as you have all your downloads on your backup of your library then that shouldn't be a problem - you won't be able to redownload anything from the Australian store unless you return to Australia anyway.

Trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images

trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images say "preview cannot be seen" and some don't. And when I try to import and I hit "new photos" it's all the photos on my card. My brain is about to explode.

It said something similar where the thumbnails were supposed to be.
Just got the newest edition of LR, 4.4
4.4 is not the newest edition of LR
We don't want to know that it said "something similar", we want to know the exact wording. In fact, you ought to state the exact problem you are having, in detail, instead of saying you are having the same problem.

Applying settings preset to multiple images in ACR v4.3

When attempting to apply a preset to multiple images in ACR, the preset is only applied to the "current" or "active" image. The other images in the thumbnail pane remain unchanged, even though they are selected. This function works correctly in Bridge, but not in ACR. "Synchronizing" the files does not do the same thing, as my preset incorporates "Apply auto tone adjustments." What am I missing?

Pardon my misunderstanding of the question. I just tried it, and the method of selecting the images has no impact (e.g., the "select all" button, or hold "shift" or "ctrl" and click on multiple images...)
All the boxes are checked in the "synchronize" dialog. However, this synchronizes all of the settings to the "active image," which ties the tone adjustments to that image, which is undesirable. I just want to automatically adjust the tones (as part of my preset) to all of the selected images.
Based upon input from this tread, this is the refined procedure I use to "check" if it's working (which hasn't for me so far):
1) Select multiple images (or all, if you prefer)
2) Apply "camera raw defaults" Note that the settings default to Blacks: +5, Brightness: +50, Contrast: +25
3) Apply a saved preset (saved with the check box "Apply auto tone adjustments" checked).
4) Note that the Blacks, Brightness, and Contrast sliders only "adjust" for the "active" image, but don't change for the other selections. They remain at Blacks: +5, Brightness: +50, Contrast: +25
Again, if I perform this procedure in Bridge, it works for all selected images. However, in ACR, it functions as described above.
Does that clear it up?
Thanks for the prompt responses so far. I hope I'm simply doing something incorrectly!

HT5868 if i accedently hit trust on my friends computer will this back my phone with all my info to his computer??

If i hit trust computer on accedent on another persons computer will this sync and back up my iphone data to that computer?

Raul206 wrote:
If i hit trust computer on accedent on another persons computer will this sync and back up my iphone data to that computer?
Maybe.
But you can (and should) delete your backup in iTunes prefs > Devices.

I have 3 year warranty, will this apply for my charger?

my charger stopped working and the forums said that the chargers have one year warranty, but i brought 3 years worth of warranty so will it apply to my charger also?

No, it does not.

How can I apply 'Lens Correction' to 32bit image without reducing to 16bit?

I'm looking for a way to apply 'Lens Correction' to a 32bit image. The image is originally 8bit, but I need to bring it up to 32bit when running the HDR. I only seem to be able to do 'Lens Correction' on 8 or 16bit images however, and the quality of a 32bit HDR wipes the floor with a 16. I'm a bit new to smart filters so hopefully there is something simple and obvious that I'm missing! Any help?

This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

HT5463 Is it possible to use DND on a single number and will this apply to messages as well?

Can you use DND on a single phone number?

What do you mean by "use DND"? Do you mean you want to block a single user? Or let only a single user through. The latter would be fairly simple. Just make that person the only "Favorite" and set DND to allow only favorites through. Blocking only one person can be simply accomplished by assigning them customer ring and text tones of silence.

How to see all image file types when saving images without selecting "all files"

Hallo, and thank you fom reading.
I am a person who saves a lot of images online in different folders with different names like G - 456 or F - 35.
I have been using firefox 10.0.2 for a long time because of a bug (I guess) that made it easier to save images.
When I saved an image it would always show me all the image files in any folder I wanted to save it, and that way making it easier for me to save files with the right names.
Now with the newer firefox (currently 19.0) whenever I try to save a JPEG I only see the JPEG files in the folder and only way to see the others is by selecting "save as type" all files, but with this I also see all the files that are not images.
This used to save me a lot of trouble and a bit of time but I dont see anything in the options menu that can help me. Is there a way to recreate this function?
Thank you for your time.

I suspect this is a Windows problem. I am surmising the FilePicker uses the Operating System or Desktop facilities. Does Windows 7 offer any other file categories like ''images'' ?
I do not normally use Windows 7, but may the option depend upon the directory being an indexed one, I ask after finding this thread ''Bring File types tab back'' [http://www.windows7taskforce.com/view/819]
This question is a duplicate of [/questions/951764]
Normally I would lock the duplicate question, but in this instance I will leave it open as it is unanswered and someone may give a better reply.

Recovery Slider: Color Changes with Camera Profiles, not so much with ACR 4.4 Profile?

I'm sure there's a reason for this, and not necessarily a defect, but I have to ask:
The recovery slider: if I use the Recovery Slider on an image set to the ACR 4.4 camera calibration profile, this helps control my highlights without affecting the overall color/tint of the image. However, if an image is set to the Adobe Standard camera calibration profile (or any of the other camera profiles) and I use the Recovery Slider on that image, the affect on the image seems to be different: the highlights are also controlled, but not without a perceived effect on the color tint of the image. The color balance almost seems to slightly change. Particularly noticeable on skin tones. I'm working with 5D files, using Lightroom 2.3 on a Mac.
What's the reason for this? Anyone experience similar?
Thanks

This is a known "problem". It is caused by "hue twists" that are present in the camera-matching profiles and the new Adobe profiles. Several threads on this in the ACR forum:
http://www.adobeforums.com/webx?128@@.3bc03c04.59b77b09
http://www.adobeforums.com/webx?128@@.3bc03c04.59b783f8

How to edit in ACR when ICC profile not recognised?

Hi everyone,
I am getting some of my photographic images made into a book by a large and reputable printer in HK. They have just sent me their ICC profile and I've figured out how to do soft proofing in photoshop using the profile.
However, I do 99% of my images adjustments in camera raw, then only open the image in photoshop if I need to do something else camera raw can't do (rarely).
Is it correct that I won't be able to see how my photo will look when printed until I open the image in photoshop, after I've already done of my adjustments in camera raw, and meaning that I might have to do another round of changes in photoshop??
Is there any way for camera raw to load the ICC profile so I can see what it's going to look like while I'm making the adjustments in camera raw, not after they're already done??
HELP!
Thanks,
Poppy

As I asked in the Photoshop Windows forum, what profile(s) have they sent you, along with what instruction? A printer profile? A document profile? Both?
It may be that you'll want to work on your images in one of the standard document profiles (ProPhoto RGB, Adobe RGB, sRGB) then when you're ready to deliver images to the publisher you'll want to do a Convert to Profile operation.
But that's getting ahead of things. You really haven't given quite enough information just yet.
-Noel

I have my @gmail account for iTunes purchases, and my @me account for contacts/calendar, how do I approach iCloud and how will this affect me?

I know accounts cannot be merged. The @gmail account has existed for years before the @me account.
I haven't been able to set up my phone yet because I have absolutely no idea how this will affect me, when it was quite clear before.
How will this affect me in the future? What about when my @me service expires (I had just under a free year left)? What email should I link? What should I be worried about if kept separate or the same as they are now?
I still don't even understand what exactly iCloud does yet. If I set up my phone with whatever my iCloud account is, is it locked in? Since no credit card info or applications or purchases are associated with it, it will be of no use in that area.
I am absolutely confused on what I should do, and after spending 4 hours attempting to update my phone, am still stuck on having a useable device.

This point I don't quite understand. It is clear that:
   1) your additional 20gb are available only up to next summer
    2) the migrated account will be downgraded to a free account then.
    3) the purchased music and apps do NOT count in the 5 gb.
So, I don't know what you need the 20 gb in the "unused AppStore account" for. Your documents and emails are all on the 25 gb account.
I think, you can log into your non-me.com AppleID and change your e-mail address there without loosing what you purchased. So, I wonder what would happen if I put the me.com address there...
Not sure, I would try...
Regarding the me.com AppleID, you should make sure you have a secondary email account added there, otherwise it might be difficult to recover that account in case you cannot read the me.com email anymore. Interestingly, when I tried to put my non-me.com address there, it complained about that email already used by a different account. So, I guess if you try to put your gmail account there it will complain. So, you probably need a third independant email account....

My iPad 4 has a ton of small scratches on it!? Will this affect price?

Alright, so I've been using a screen protector for the past month or so and I just took it off and noticed a bunch of small scratches all over the screen. I'm surprised cause from what I remember before I put the screen protector on it it had few to no scratches.
I have a very nice case for my iPad, and while the screen protector was on it I did drop it (minor drops) a few times. But surely those few drops couldn't make all these tiny little scratches could it? Also, when I did clean the screen with the protector on it I used Lysol, could that have causes the scratches or no?
I honestly don't know if those scratches were there, cause I just noticed them now after I took the protector off for over a month and I was under direct light in my very bright bathroom (I was right under where the light shines).
When the new iPad 5 comes out I plan on selling this iPad 4 (32 GB) on eBay, but I'm kinda worried these scratches to the screen will drastically effect the price. Will it change the price a lot or do most used conditioned iPads contain scratches?
When that time came I was planning on selling it for around $500 and pitch in the other $100 for the iPad 5 32 GB (it would include this leather/plastic duo case I have on it currently).
Oh, and one last little question, I accidentally sprayed the Lysol on the speaker in the bottom right, it's been 14 days since the incident and the iPad sound still works normally. Does this mean no damage was caused? When I first used the sound it sounded all crackly, but then it immediately went back to normal. So will this accident come to bite me in the butt when I sell it or no? Oh, and another small bit of info on this, when I sprayed it inside the speaker I took about 2-3 mins to wipe it (cause I had to find a towel to wipe it with) and when I wiped it up, I put my mouth on/around the speaker and tried to suck the Lysol out of it (my logic was like when people suck venom from snake bites lol), just Incase there was still some left inside (which there seemed to be nothing left when I sucked it). I know it sounds gross, but I'd rather get a little bit of chemical taste in my mouth than have my precious iPad damaged hah :P
So it's easy on all you readers, I will organise all these questions into numbers :)
1. Could a few drops of my iPad (with case on it) cause multiple small scratches? How do I fix these scratches (it makes a rainbow effect in light)?
2. Could the Lysol have caused the scratches when I sprayed a little bit on the screen protector?
3. Will all these scratches affect the price for when I go to sell it on eBay? If so, by how much do you think?
4. Do most used iPads have scratches in the screen?
5. When the Lysol was accidentally sprayed up inside the speaker, did it do any damage (speaker sounds 100% fine since the incident, no difference what so ever, except, when I first used the speaker it made a crackly noise, but then stopped)? When I resell it, would this incident come to bite me in the butt or do you think I'm safe since its been 13 days since that happened (I rounded to 14 earlier)?

Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%.

"File could not be found" message on top of all images in Library: How do I fix this?[was:Question]

New to LR 5.2 Running OS X 10.8.5. Tried to save image in file folder. Now get this message at top of all images in Library: "File could not be found." How do I fix this?

“Save” is not a term used with LR to create images. What are you trying to do, exactly, in terms of LR menu options?
Are there questions marks on the thumbnails for the images that say File could not be found?
Sometimes a screenshot can communicate things quicker than words.

How to assign a specific color profile to an image?

I am in the process of submitting an image electronically.
They want me to submit images that have the color profile "ISO Coated v2 ECI".
My image has the color profile "Adobe RGB (1998)", according to File Info, and according to Preview.
I have downloaded the color profile from eci.org and put them in /Library/Color Sync/Profiles.
When I open the image in ColorSync Utility, I can see the profile under 'Profiles'.
However, when I try to assign or match or apply the profile to the image in ColorSync, it does not "stick".
With 'Match to Profile', I can select the profile (in the dropdown menu under 'Output'). But when I then save the image (using Save, Save As.., or Export..) it seems like it does not put that profile in the image, i.e., when I open the new image using Preview, I still get the "Adobe RGB (1998)" profile.
Same with 'Apply Profile'.
With "Assign profile", the profile I want is greyed out.
I also tried Pixelmator, but that does not offer me the profile "ISO Coated v2 ECI".
Am I missing something?
Could some kind soul please shed some light on this?
Or point me to the right web page or forum?
All insights and suggestions will be highly appreciated.
Best regards,
Gabriel.

Thanks for your response.
But, first of all, the profile I want to "set" is not in that list in Preview.
Second, I believe now that I don't need to just *assign* the profile, I need to *match* the image to it (the profile is an output profile).

Auto-will this apply lens profiles to all images in ACR when a profile exists

Similar Messages

Maybe you are looking for