AutoCAD 2000 Architectural Desktop 3 installation in Windows 7 64 bit Professional

How to get AutoCAD 2000 to install on a Windows 7 64 bit operating system. The problem we were having was with the forced installation of Netmeeting from the AutoCAD installation disc. Our solution at the time was to install AutoCAD on the Windows Virtual XP. The XP mode created more problems than we were able to ignore because the XP mode is very watered down and does support proper graphics for the drafting software. We decided to try another approach. Take the AutoCAD 2000 installation disc (Architectural Desktop release 3 in our case, which is based on AutoCAD 2000) and create an ISO image of the disc. I used MagicISO because it allowed me to make the image, and delete the folder for Netmeeting from the ISO image. I believe it is under Support\NM in the ISO image. Once the NM folder is deleted from your ISO image, burn the image onto a new disc. It will fit onto a 700mb disc. Then proceed with the installation of AutoCAD onto your Windows 7 machine. It worked great for me, but my colleague is still having problems. We suspect it is because he is still using the Beta version of Windows 7 64. I am using the full Windows 7 64 Professional version. We will be getting the full version for my colleague and trying the installation again. Also, my colleague tells me there is a work around to get the express tools installed. Keep checking back, we will be updating as we get new info.
Cheers,
James

I know this is an old thread, but I would really like to install acad2000 on my new laptop.
What does creating the ISO image do for you? I did this and the iso doesn't automatically load or anything. I can try to run the setup copied to the ISO disc, but it does the same thing as the autocad installation disk. I get the error stating it is
not compatible with my version of windows. I'm trying to install acad2000 on a windows7 pro 64bit machine.
Any help on this is greatly appreciated.
Thanks
Jason
Jason ..... obviously you're not the only one reading this after it became an OLD thread!
Go back in this thread (up above, that is) and find the response by -James on Tuesday, January 05, 2010 at 4:58 PM. I'll repeat his instructions here.
1. Open the ISO file with MagicISO.
1B. Look for folder \Support\nm. Remove the "nm" folder.
2. Go ahead and install the software with Full/complete installation. The installation may fail on you near the end.
If it fails....
3. Put your install disc back in the drive (the one you burned, the ISO disc), and choose uninstall from the menu. After it unistalls, reboot your machine.
4. Now put the disc back in again, and redo your full/complete installation. It should work this time. (We have done these steps about 5 times on 2 seperate machines to verify it works because we have many machines that need to transition
at some point...) If it fails a second time, try steps 3-4 again. If it fails a third time, let me know...
Jason, IF you have returned to this forum, from there on you're on your own, unfortunately!
Hope this helps .....

Similar Messages

I cannot install itunes on my computer; I keep getting the following message every time:   Could not access network location %PUBLIC%\Desktop\.   I have a DELL Optiplex 750 Desktop Computer, Running Windows 7 Professional, SP1, 64 bit, 3.40 GHZ, 4.0 GBRAM

I CANNOT INSTALL I-TUNES 64 BIT ON MY COMPUTER. I HAVE A DELL 750 OPTIPLEX DESKTOP COMPUTER RUNNING WINDOWS 7 PROFESSIONAL SP1, INTEL Q965/Q963 EXPRESS CHIPSET FAMILY.   THE ERROR MESSAGE I KEEP ON GETTING EVERY SINGLE TIME IS:
Could not access network location %PUBLIC%\Desktop\.
ANYONE HAVE AN IDEA ON HOW TO FIX THIS PROBLEM?   THANKS FOR YOUR HELP IN ADVANCE!

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

A successful installation on Windows XP Professional SP2

I have had partial success installing before.
This time i created an D:\oraclexe director with the followin INHERITED permissions:
ravn\Administrators : Full Control
Authenticated users : Read & Execute, List Folder Content, Read
System : Full Control
I made sure that C:\WINDOWS\system32\drivers\etc\hosts contained the IP address and name of the PC. It also contained localhost IP address and name.
Installation went like a charm. Even the Database Home Page works.
I suspect that most problems with Oracle XE installations on Windows XP can be solved with the proper inheritable access rights. Errors in network configuration excepted.
greetings,

.Net uses oledb connection. The connection string used on the WinXP system results in the ORA-12154 error on the WinXP x64 system.
from WinXP x64 system:
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\dchman>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-AUG-2
006 07:56:31
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = daddysx2
)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (120 msec)
C:\Documents and Settings\dchman>
it is the same for the WinXP system, except for the host name.

SQL Server Installation on Windows 7 Professional sp 1

Hi Everyone,
I have windows 7 professional sp1 installed on my pc.
I am planning to install SQL server 2008 on my pc.
As I am using sp1 os, I have to install SQL server 2008 sp1 also.
I have enabled .net framework 3.5, installed sql server 2008, and sql server 2008 sp1.
But when I tried to connect to server I am getting the below error.
The below is services state information.
Thanks and Regards, Readers please vote for my posts if the questions i asked are helpful.

I am getting an error like "this is used by another application" when I tried to delete the entries starting with "Microsoft.SqlServer".
Can you please help me on this.
Hi G Srikar Reddy,
Please ensure that you have uninstalled SQL Server 2008 instance and other SQL Server 2008 R2 components completely, and restart the computer.
Besides using the Windows Installer cleanup tool , you can also perform the following steps to uninstall
SQL Server 2008 manually.
    a. Uninstall all SQL Server 2008 components ( including the entry "Support for SQL Server Setup") from the control panel.
    b. Backup the registry.
    c. Delete the following keys in regedit:
        --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
        --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    d. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
    e. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
    f. Rename all the SQL Server folders in the computer.
    g. Reboot the machine.
Thanks,
Lydia Zhang

Unable to install 11g R2 Database(desktop class) on Windows 7 professional

Hello,
I have downloaded Oracle 11g Release 2 and try to install on Windows 7 Professional (x64) and it is giving the following error .
Appreciate if any someone can resolve.
Expected Value
: n/a
Actual Value
: n/a
List of errors:
PRVF-7531 : Physical memory check cannot be performed on node "Tanweer-PC" - Cause: Could not perform check of physical memory on the node indicated. - Action: Ensure ability to access the node specified and view memory information.
Edited by: Tanweer on 20 Mar, 2011 8:31 AM

Here output from the install log files:-
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME Tanweer-PC
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_client_OraMTSPortNumber 49156
oracle_install_db_ASMSNMPUserPassword Protected value, not to be logged
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_CustomInstall false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EMCentralAgentSelected
oracle_install_db_EMEmailAddress
oracle_install_db_EMSMTPServer
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_ReceiveEmailNotification false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_RecoveryBackUpPassword Protected value, not to be logged
oracle_install_db_RecoveryBackUpUsername
oracle_install_db_SID
oracle_install_db_SecureConfigDisabled false
oracle_install_db_SetOracleBase false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords Protected value, not to be logged
oracle_install_db_SuperAdminSamePasswdForAll Protected value, not to be logged
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseDBControl true
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
INFO: Launching Oracle Database 11g Release 2 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@5f159e0c
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>

Discoverer desktop installation on Windows 7 64 OS XP Mode TNS error

I have installed discoverer administrator and desktop in XP Mode on a Windows 7 64 OS. I downloaded the install from Oracle Discoverer 11g Fusion Middleware. I am using XP mode because I believe there is no download for the 64 bit OS in the Windows environment. I have had no trouble with the installation. The trouble comes when trying to connect to a database. I get a TNS error.
I have edited the environmental variable to include tns names. I am able to connect to a database on the network via sql developer but not with discoverer.
One needs to run the xp application within the Windows 7 environment. I have included the environmental variable in both environments (xp virtual and Windows 7) and am 0% successful with discoverer and 100% successful with sql in seeing the database.
Any technical advice?

I am indebted to Praveen Deshpande for this :
You need to create a Windows environment variable TNS_ADMIN that points to the directory where the correct Tnsnames.ora file is held.
On my system, I went to 'Computer - System Properties - Advanced - Environment Variables", created an environment variable TNS_ADMIN and set its value to C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN
Check where your server or other tnsnames file is stored and set the corresponding value.
Then it all worked perfectly.

Oracle Service Bus Installation on Windows 64bit Professional

Its 28th July 2012, I have been unable to get the OSB platfomt running on my new Windows 7 Laptop. Keep getting the "The selected wizard could not be started.
Plug-in "com.bea.alsb.ui" was unable to instantiate class "com.bea.alsb.ui.wizards.NewALSBContainerWizard. com/bea/alsb/core/containers/exceptions/ContainerException" error while attempting to create a new OSB project from my Eclipse Helios. I have installed OSB 11.1.14, OEPE 11.1.1.6.1 and wls1036_generic but I haven't been able to get the IDE working!
Can anyone tell me the right combination of OSB, OEPE and wls generic installer that really works!........ I would pretty much appreciate and advice that works!..Thanks!

Hi,
OSB is not certified on Windows 7 according to certification matrix...
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It maybe possible to get it running with some workarounds...
Have you seen this thread?
Installation - OSB in 64bit windows 7
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Lenovo G550 Windows 7 Professional Upgrade

This Notice refers to 2958-A5U and 2958-A4U models of the Lenovo G550 notebook PC’s only.
The 2958-A5U and 2958-A4U G550 systems ship preloaded with Windows XP Professional, and include a Windows 7 Professional upgrade disk.
Issue: When upgrading from Windows XP Professional to Windows 7, some users have been unable to successfully complete the upgrade.  The most commonly reported failure point is when the customer is asked to insert a Certificate of Authenticity (COA) key. The Microsoft Upgrade process for Win XP to Win7 requires the upgrade to be executed from a ‘cold boot’. If the Windows 7 DVD is inserted while the system is running, the installation process will auto run. However, at the end of the installation process, the system will ask for a 25-key Certificate of Authenticity (COA). The Win7 upgrade process will not successfully finish the installation using this method. The installation DVD must be inserted while the machine is powered off and not running.
When upgrading from Windows XP Professional to Windows 7, Microsoft advises that this process be done via a custom ‘clean’ installation.  Per Microsoft.com; "A custom (clean) installation erases the contents of your PC's hard drive. Your files, settings, and programs will not be transferred to Windows 7".  The clean install will remove any pre-loaded software applications, including VeriFace, One Key Recovery, and other applications that were installed by Lenovo or the user.
Customers should review the following information prior to performing the Windows 7 Professional upgrade.
The Windows 7 installation procedure provides a clean installation of Windows 7 Professional edition. During this process, all contents of the C: drive including all applications, files, programs and user data will be archived in the Windows.old folder.  The data should be available for access, but the applications and programs will not run, and Windows 7 appropriate versions will need to be installed. Lenovo STRONGLY recommends that external backups or all user data are made prior to initiating the upgrade in order to prevent permanent data loss.
Correct Windows 7 Upgrade Procedure:
1) Power off system
2) Insert Windows 7 disk in the DVD drive
3) Power on system and press F12 to access the boot order menu
4) Select the option to start from the DVD / Optical drive
5) Follow the on screen directions as Windows 7 installs
6) Remove the DVD at the end of the process and reboot to Windows 7
Windows 7 has native drivers that will fully support most of the hardware on Lenovo G550 systems.  In order to maximize the functionality of the Trackpad and the Power Management system, the appropriate Lenovo drivers must be installed. The most current Lenovo Windows 7 drivers and applications are available for download here. Please check this site periodically for updates.
Recovering to Windows XP by using One Key Recovery:
The One Key Recovery feature can restore the factory XP downgrade preload at any time, but will erase all other data.
Important: All user data should be saved prior to implementing the following procedure
      1) Power off the system
2) Press the recovery button (small round button next to the power button)
3) System will start and OKR (one key recovery) application will load
4) Select System Recovery from the menu
5) Select option to Restore to factory default
6) Click “Start” button to recover your system partition
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

eaeditor wrote:
Now I just started the laptop up , clicked next when I was prompted for the product key and windows 7 ultimate 32 bit pro starts up...ofcourse I still need to authorize...the serial at the buttom is still a no go
Error message displayed: the product key will not work with this version of windows 7 and I need to reinstall or get a serial for windows 7 professional .
The recovery disk set is supposed to have an SLP key embedded, so that you do not need to activate it, as long as the disk set matches the OS version that is nominated on the COA attached to the laptop.
If it really does say "windows 7 ultimate", then there is something odd going on. Can you please double check that it says "ulitimate"?
With Windows 7 licening issues and keys, the terminology needs to be quite exact to get to the best answer for you!
Cheers,
Bill
I don't work for Lenovo

Problem in installing Oracle 9i on Windows XP professional

I have completed a fresh installation of Windows Xp professional on my machine. The machine configuration is 261 RAM with 10 GB hard disk with NTFS partition and IE 6.
When I tried to install Oracle 9i Client on my machine, it gives me the following error:
The Java Runtime environment was not found at C;|Documents and Settings\Program Files\....\jrew.exe. Hence, the ORacle universal installer could not run.
Plz help!

Down the Java Runtime from Sun
That might solve it :)
If I recall, Java Runtime is not shipped with XP
Humphrey
www.not5150.com

Oracle 11g R2 client installation on Windows 7 64 bit hangs after performing prerequisite checks

Windows 7 Professional SP1 64bit OS
6 GB RAM
380 GB free space
Extracted client to C:\Stage\win64_11gR2_client\client
Ran setup.exe as administrator, but the installation always hangs after step 5 of 7 is completed (Perform Prerequisite checks). Install log ends with entry "INFO: Get view named [SummaryUI]"
What am I missing here? Any help would be greatly appreciated.
C:\Stage\win64_11gR2_client\client>dir
Directory of C:\Stage\win64_11gR2_client\client
06/15/2013 02:56 PM    <DIR>          .
06/15/2013 02:56 PM    <DIR>          ..
06/15/2013 02:56 PM    <DIR>          doc
06/15/2013 02:56 PM    <DIR>          install
06/15/2013 02:56 PM    <DIR>          response
06/15/2013 02:55 PM           341,304 setup.exe
06/15/2013 02:55 PM                56 setup.ini
06/15/2013 02:59 PM    <DIR>          stage
06/15/2013 02:55 PM             4,327 welcome.html
               3 File(s)        345,687 bytes
               6 Dir(s) 412,474,404,864 bytes free
Last few lines of install log:
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@75f0f8ff
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from c:\Stage\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Temp\OraInstall2013-06-17_02-55-15PM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\APPS\PuTTY\;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]e4b
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: PN-PC:C:\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:5.9491GB (6238064.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: PN-PC:C:\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:130MB
INFO: Actual Value:384.1495GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:1023
INFO: Actual Value:369
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

Yes, I've tried using the -jreLoc option but it doesn't seem to like the path.
Version 6.0.200.2 is at C:\Program Files (x86)\Java\jre6\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\Program Files (x86)\Java\jre6"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_04-47-16PM. Please wait ...
The Java RunTime Environment was not found at "C:\Program Files (x86)\Java\jre6"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again
I downloaded a newer version to C:\APPS\Java thinking the space in the path for Program Files (x86) might be a problem, but that also fails with the same error message
Version 7.0.210.11 is at C:\APPS\Java\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\APPS\Java\"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_05-09-13PM. Please wait ...
The Java RunTime Environment was not found at C:APPS\Java"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again

Oracle 11g R2 Installation on Windows 7 (64 bit)

While installing, it is asking for Proxy Server. What should I enter?

I'm installing on laptop Oracle 11g R2 Installation on Windows 7 (64 bit) it was asking me to enter Proxy server details, since I'm not connecting internet with proxy I've skipped the step. But after that when reached the "System class" there was two radio buttons 1)Desktop Class - which selected default and clicked on Next button, then it disappeared. Looks like process was stopped. i have looked it in Windows Task manager it is not there.
Is any one know what is going on?
Thanks.

Sync BB desktop software with Windows 7 64 bit

Dear Friends, I am rally stuck here. I just bought a new laptop with MS office 10 and windows 7, 64 bit. I was earleir using xp and was able to sync my phone with laptop very easily. Now after buying the laptop I just realised that I am not able to sync my BB software and my phone and not able to transfer my data to my laptop.
I tried downloading outlook but it is not getting done, sighting, not possible. I also tried syncing with Morzilla and windows live as well But the desktop software just not identifying neither of them.
Can some one please help me here, in how to sync my phone to my laptop with windows 7 and transfer my contacts and calender on to my laptop.
Other wise I will have to throw away my BB and buy some other phone.
Regards
rohit

Hi and Welcome to the Community!
First off, you must have installed one of the compatible Desktop Organizer apps:
KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
Attempting to use anything NOT on that list will, of course, fail.
Secondly, you must have not have Outlook installed as "Click To Run":
KB24040 Support for Microsoft Office 2010 Click-to-Run installation
If you have it installed in that manner, you must correct that.
I have no idea how your prior machine was configured, but I know 100% that you can synchronize to a Win7X64 Laptop with Outlook 2010...I do it all the time.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I connect a Windows 2000 PC desktop to my home network (laptop mac)

Hi,
Sorry to be such a novice. I have created a wireless network with an airport express. My Macintosh laptop can connect to it without a problem and can access the internet. Next step is I want to connect my desktop PC (running Windows 2000) so that it can also connect to the internet using the wireless connection.
Do I need special equipment so the desktop can find the airport express network? How do I set it up on the PC?
Also - does anyone know the easiest way to connect a TIVO to the home network as well?
Thanks for any guidance!
-Lori

Your PC needs to have the ability to join a 802.11b/g compatible network. If it doesn't have that hardware ability, you will need to add a wireless card or wireless adapter.

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

How do you overcome a blackscreen upon beginning installation of windows 7 64-Bit on a MacBook Pro5,1?

Hello All,
I have a MacBookPro5,1, upgraded to 8gb RAM running Mac OS X Version 10.6.8.
Apple states that this model is capable of installing Windows 7 64-Bit.
But when I try to install Windows 7 via Boot Camp Assistant, everything goes to plan until Boot Camp restarts the machine where a Blackscreen appears and does not show the windows installation screen. The machine is doing something in the background but then appears to power off. I have to press the power button twice, one long press to stop whatever it was doing then one more to power back on. I can get back into the Mac side with no problem.
I am certain bootcamp does not have the relevent video drivers for the windows installation to use...
I am using a Microsoft certified Windows 7 Professional SP1 image file burnt to a DVD-R, the image was downloaded from Microsoft as part of their student deals.
How do I get the blackscreen to go away?
Kind Regards,
tmanz

Okay,
So I still have the problem.
I was able to upgrade my Mac OS X to Lion using a Retail DVD and this gave me Boot Camp v4.0.
Followed the steps, burn't the downloaded drivers to a DVD. Then selected install on the Boot Camp and the MacBook Pro still goes into a blackscreen where I should see the Windows 7 installation screen.
This problem seems to be similar to the apple problem with their iMac's TS3173, but I am dumbfounded as to why I have this problem. I don't think anyone else out there with a MacBookPro5,1 has this problem.
I think If I had a solution as in TS3173 for the MacBookPro5,1 it would solve my case. Really I need the nVidia drivers for the GeForce 9400M, I tried getting these from the Boot Camp drivers but these are in exe form which would not be detected by the Windows 7 installer.
Is there anyone out there that understands my problem and can advise me?
Your time and efforts are greatly appreciated.
Kind Regards,
tmanz

AutoCAD 2000 Architectural Desktop 3 installation in Windows 7 64 bit Professional

Similar Messages

Maybe you are looking for