Autocad 2013

Hi all,
I recently sequenced Autocad 2013 (part of the Building Design Suite 2013). All went well and Autocad is functioning properly except for two errors.
These errors are report to my logs as being blocked by the software restriction policy. I checked the sandbox location for restrictions but there are none. I've spent a lot of time figuring out why this is happening, but with no result.
Anyone an idea on this matter? Help would be greatly appreciated.
Error 1: Cannot execute a program. The command being executed was C:\Windows\Microsoft.NET\Framework\V4.xx\csc.exe
Error 2: Failed to execute Exchange Host application C:\Program Files\Autodesk\AutoCad 2013\AdExchange\AcbrowserHost.exe
This program cannot be run because of software restriction policy

rversluis2011,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

App-v 5.0 Sequence AutoCAD 2013

Hi, I am currently trying to sequence autoCAD 2013 according to tips from
http://www.naevette.com.au/sequencing-autodesk-autocad-2012-x64.
However, during the sequence, when I started AutoCAD installation, program will notify me that Dotnet4 section is missing and installation will be stack there for ever.
Has someone tried this? Please help!
THank you !
Thomas

All of the 2013 and most of the 2012 AutoCADs appear to be un-sequencable at this time, either under 4.6 or 5.0. I have been working a ticket with MS support for about 7 months now and we are not getting anywhere fast on it. The symptoms are
that the app at the client immediately quits after launch, issuing an app specific error that is different on each version of the app attempted, but often it is a complaint that it is not installed correctly. Procmon traces reveal no unusual file
or registry issues leading the app to make this complaint.
Something is amiss, as earlier versions work OK. I have ruled out licensing, VC Runtimes, and (I think) framework issues.
I would suggest punting on sequencing this until you see that someone else has success.
Tim Mangan MVP for App-V and Citrix CTP Author of AppV books: "The Client Book" and "OSD Reference Book" (http://www.tmurgent.com/Books )

Can't print A3 from autocad 2013 with hp officejet 7610 in win 7 32 bit

I can't print in A3 paper from Autocad 2013 with hp officejet 7610 in win 7 32 bit OS.Printing result is always A4 ussing this software.Other software have no problem printing in A3.An expert tried for three hours to solve the problem but has no luck.I have no problem print in A3 paper in win 8.1 64 bit system with the same software and printer.I think this is a problem of 32 bit driver of hp officejet 7610.Please help me to solve this serious problem.

We're experiencing a similar problem with cad 13 and win 8.1 with 7610 e-all in one printer. always plots a4 or letter size in the middle of the A3 paper. We need urgent help please!!!ı ve tried to delete and re install the printer driver and no response!! ı hva another computer with win 8.1 and cad 13 installed.But we have no problem in this machine ?? I can not understand where is the exact problem? Isn't there any professional to help us ?

Acrobat Pro and AutoCad 2013 for Mac

Hi there:
I just bought Adobe Acrobat Pro in order to make PDF files from AutoCad 2013 for Mac, but when I try to print, the option for Adobe PDF is not prompting and I don't how to set it.
I'm just using a trial version of AutoCad. I couldn't try with a trial version of Adobe Acrobat Pro, because the trial version for Mac is not available.
Could it be that Adobe Acrobat Pro is not compatible with AutoCad 2013???
Thanks,

Indeed it is not. Acrobat X 10.1 supports ACAD 2011 (32-bit), as indicated on the product matrix:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Each version of Acrobat includes PDFMaker plugins for the versions of these applications which are on general release at the time the Acrobat version is developed, so you'll have to wait a while. Adobe doesn't develop plugins based on beta versions, so with ACAD 2011 releasing in March 2010, it made it into the X build (released Nov 2010) but ACAD 2012 did not. ACAD 2013 was only released to market this March so there certainly won't be any PDFMaker support right now - beyond that I can't comment, sorry.

I will be using Autocad 2013 software and UGS NX, should I go for i5 or i7 MBA?

Hi all,
I will be using Autocad 2013 software and UGS NX, should I go for i5 or i7 2012 MBA?
Main tasks are reviewing those drawings. Not really designing it.
Thank..

Hi, it not about able to afford.
Cos if i dun realy need that, than I will rather get it directly off the rack.
Rather to wait a few days..
LOL..

I downloaded AutoCAD 2013 for mac and then the macbook started to glitch! WHY????

Hello,
I downloaded AutoCAD 2013 for mac and after 20 minutes work in the Autocad my macbook pro with Retina display 13 inch (OSX 10.9.1) started to glitch.
Then I deleted this program from mac, but it is still glitching. When I am moving windows, the picture on display is just breaking and after few seconds it is ok. Moreover, the Multi-Touch Trackpad's three, four finger function is also glitching.
Did it happen because something wrong with my graphic drivers which could be replaced by the AutoCAD
Please help me with this!!!

Reinstall AutoCAD and relaunch teh program. AutoCAD leaves the GPU in a bad power state in Mavericks, which causes problems.

Laggy animations because of Autocad 2013?

Hello, I'm having some problems with Autocad 2013. I've had it installed for almost 5 months and it never gave me any problems until now.
First of all, I was experiencing an unbearable lag with almost any animation (mission control, scrolling, switching between desktops, dock animations, etc) but, after doing some research on the internet, I realized it was Autocad's fault and the solution was to opening and closing it. That almost solved my problem.
A few minutes after opening and closing Autocad I realized that, even though the dock and "desktop switching" animations were working fine, scrolling was yet kinda choppy and mission control was having the same problems than before, so I tried opening Autocad and checking if the animations were working well whilst it was open. As a matter of fact, that was the solution of my problem, and once I've closed the Autocad the problem had returned.
Does anyone have any solution to it?? I don't get why this is happening because it was working fine until today. It's annoying.
I have a mid 2012 13-inch Macbook Pro with an i5, 4GB RAM and 256GB Samsung 840 Evo SSD running OS X 10.9.4.

It's a known issue with AutoDesk applications. I don't know what causes it.

AutoCad Supported NVIDIA Graphics Card for AUTOCAD 2013

We are an IT support company who have a client who has a HP 8200 elite with an Intel Core i7 Processor, 8GB RAM, a 1TB Hard Drive and requires to run AutoCAD 2013. We are struggling to find a graphics card that is supported on the 8200 elite, please see below for a list of support NVIDIA graphics cards, could you please advise if any of the ones from the list would work on an 8200? Ideally dont really want to spend more than £150 - £200.
http://usa.autodesk.com/adsk/servlet/syscert?siteID=123112&id=18844534&results=1&stype=graphic&produ...
I look forward to hearing from you.
Matt
This question was solved.
View Solution.

Which one:
Matching products outside United States (6)
Desktops & Workstations (6)
HP Compaq 8200 Elite All-in-One Base Model PC
HP Compaq 8200 Elite All-in-One PC
HP Compaq 8200 Elite Convertible Minitower PC
HP Compaq 8200 Elite Microtower PC
HP Compaq 8200 Elite Small Form Factor PC
HP Compaq 8200 Elite Ultra-slim PC
When the pc has a pcie16x slot, then I believe you should look for one of the NVIDIA GeForce GTX 2xx ....
V.
*** Say 'Thanks' with Kudos ***

Printing to PDF (custom page size) from AutoCAD Won't Work Anymore

The DWG to PDF driver provided with AutoCAD 2013 will not save my artwork to a high enough resolution for me to use. See attached screen shots of the PDF's printed by AutoCAD's DWG to PDF driver.
The only PDF print driver that I have found that will is the Adobe PDF driver provided with my Adobe Acrobat 9 Pro software. See attached screen shot of the PDF printed by the Adobe PDF driver. HOWEVER, I can only print to a standard paper size and I MUST print to a custom page size. When I try printing to a custom page size it will no longer let me save the PDF. It simply skips the save window. It used to work fine up until this past week, but when I came into work on Monday morning it stopped working. I cannot for the life of me figure out why it won't work now!
DWG to PDF set to Maximum Quality (400 DPI)
DWG to PDF set to Custom 1200DPI
Adobe PDF set to Custom 4000DPI

Try opening the DWG file in AutoCAD 2013 and changing its file format to an older version of Autocad (i.e, 2010/2011/2012).

Do ES4 supported autocad version ? (dwg)

Hi,
Is it support to convert autocad 2013 files(dwg) to PDF files in LiveCycle ES4 ?
thanks,

No, we can't convert AutoCad 2013(dwg) files to PDF. LiveCycle ES4 doesn't support AutoCad 2013.

Hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

System Requirements for AutoCAD 2013 for Mac:
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Direct3D®-capable workstation-class graphics card
3ds Max 2014 and 3ds Max Design 2014 are available for windows only:
System requirements for 3ds Max 2014 and 3ds Max Design 2014
Windows 8 or Windows® 7 64-bit Professional operating system
64-bit Intel or AMD multi core processor
4 GB RAM minimum (8 GB recommended)
4.5 GB free disk space for installation
3-button mouse
Latest version of Microsoft® Internet Explorer®, Apple® Safari®, or Mozilla® Firefox® web browser
Recommened Mac:
15-inch MacBook Pro with Retina display : 15.4-inch (diagonal) LED-backlit display with IPS technology
2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors
Hardware
2.4GHz quad-core Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
512GB Flash Storage
Autodesk AutoCAD 2014 for Windows vs AutoCAD 2013 for Mac
USER INTERACTION Windows Mac
Command line
✓
✓
Multifunctional grips
✓
✓
Dynamic input
✓
✓
Auto-complete command entry2
✓
✓
Hide and isolate objects
✓
✓
Create and select similar objects
✓
✓
Delete duplicate objects
✓
✓
Properties palette
✓
✓
Quick properties palette
✓
Quick view
✓
✓
In-canvas viewport controls
✓
✓
Editable UCS icon
✓
✓
Layer tools3
✓
✓
Layer groups
✓
✓
Layer state manager4
✓
New layer notification
✓
Filter
✓
Quick select
✓
DesignCenter
✓
Tool palettes
✓
Content palette
✓
Navigation bar
✓
ShowMotion
✓
Coverflow navigation
✓
Multi-touch gestures
✓
AutoCorrect command entry
✓
File tabs
✓
DOCUMENTATION
Geometry creation & measurement tools
✓
✓
Parametric constraints
✓
✓
Associative arrays
✓
✓
Copy array
✓
✓
Object and layer transparency
✓
✓
Strike-through text
✓
✓
Blend curves
✓
✓
Multiple hatch editing
✓
✓
Sheet set manager
✓
Project manager
✓
Dynamic blocks5
✓
✓
Model documentation tools
✓
Table style editing
✓
Hatch creation preview
✓
Multiline style creation
✓
Digitizer integration
✓
Change space
✓
Express tools6
✓
Text align
✓
DESIGN
Solid, surface, and mesh modeling
✓
✓
Surface curve extraction
✓
✓
PressPull
✓
✓
Autodesk materials library
✓
✓
Material creation, editing, and mapping
✓
Basic rendering
✓
✓
Sun properties7
✓
✓
Visual styles7
✓
✓
Advanced rendering settings
✓
Camera creation
✓
Walkthroughs, flybys, and animations
✓
Autodesk ReCap point cloud tool
✓
Import Sketchup files (SKP)
✓
Geographic location
✓
CONNECTIVITY
External references (DWG)
✓
✓
Image underlays
✓
✓
PDF underlays
✓
✓
DWF underlays
✓
DGN underlays
✓
In-place editing of DWG references
✓
✓
Batch publish
✓
✓
Publish or plot to PDF
✓
✓
Plot styles
✓
✓
Plot style table editor
✓
✓
AutoCAD WS connectivity
✓
✓
Autodesk 360 connectivity
✓
Data links
✓
Data extraction
✓
Hyperlinks
✓
Markup set manager
✓
dbConnect manager
✓
eTransmit
✓
WMF import and export
✓
FBX import and export
✓
SAT import and export
✓
✓
Additional model import
✓
Design feed
✓
Share on Facebook
✓
LICENSING
Standalone licensing
✓
✓
Network licensing
✓
✓
Cross-platform licensing
✓

Opening AutoCad drawing in Illustrator CS6

I am very skilled in CS5 and CS4, however I have updated to CS6, However I am unable to open a simple autocad .dwg into CS6
I am using Autocad 2013
I did not know if i need to down save the file to an older autocad file. Or is there a new way of opening an autocad file into CS6
Thanks
Jake

You will need to downsave the file to an older version of Autocad or export it as a PDF or possibly an EPS.

I just downloaded Mavericks and now my AutoCAD 2012 won't open. What do I do?

I just downloaded Mavericks and now my AutoCAD 2012 won't open. What do I do?

Autocad 2012 is NOT Mavericks compatble.
So, you either need to find and pay for an upgrade AutoCad 2013 which is compatible with OS X Mavericks or pay to upgrade to AutoCad 2014.
If you have a cloned backup of your previous system before upgrading to Mavericks, it would have been easy to revert back to your previous OS X version.
If you don't have a previous backup, your only option, now, is to create a backup of your system and important data , now, to an external hard drive. Once you have a backup, you need to purchase and clean install OS X 10.8 Mountain Lion (if you haven't purchase Mt. Lion already).
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
AutoCad 2012 is compatble with OS X 10.8. You'll have to reinstall all of your applications including AutoCad.

Autocad help for macbook ?

is it ok if I installed autocad 2013 while my macbook is 2GB memory ( Autocad 2013 needs at least 3GB) ?

It will run Autocad very slowly and may crash your Mac.
In any case 2GB of RAM is far too little.

Unable to crop Autocad DWG pasted into Excel 2010

Unable to crop Autocad DWG drawings pasted into Excel 2010. Use to be able in earlier versions 2003.
How to Can do this in word 2010 ?

Download the zip below and modify the registry.
http://forums.autodesk.com/autodesk/attachments/autodesk/706/1694/1/2000-2012%20CSLID%20Keys.zip
Please back up the system registry before adding this content to it, just to be on the safe side.
For Windows 7
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
For Windows XP
http://support.microsoft.com/kb/322756
Source post:
http://forums.autodesk.com/t5/AutoCAD-2013-2014/Editing-Excel-2007-Embedded-Autocad-Drawing-Problem/m-p/3458262#M1694
Tony Chen
TechNet Community Support

Autocad 2013

Similar Messages

Maybe you are looking for