AutoCAD on MacBook
The only reason I own a PC is that I use AutoCAD. I've been planning to buy a MacBook Pro when Apple makes a 12" size. Will AutoCAD run on a MacBook? The smallest MacBook would be acceptable.
you are welcome.
check out this link before you buy macbook:
http://usa.autodesk.com/adsk/servlet/hc?siteID=123112&id=6711853&linkID=9240618& isresults=1&card_sel=&manufac=32902&card=0&cert=0&d_stat=1&dstat=2&prod=AutoCAD-R17.0&prod=AutoCAD-R17.1&os=1&os=2&os=256&os=512&os=2048
I put intel and select all card, and nothing comes up as compatible as opposed to nvidia (used in macbookpro).
Good Luck.
Similar Messages
-
Hello,
I downloaded AutoCAD 2013 for mac and after 20 minutes work in the Autocad my macbook pro with Retina display 13 inch (OSX 10.9.1) started to glitch.
Then I deleted this program from mac, but it is still glitching. When I am moving windows, the picture on display is just breaking and after few seconds it is ok. Moreover, the Multi-Touch Trackpad's three, four finger function is also glitching.
Did it happen because something wrong with my graphic drivers which could be replaced by the AutoCAD
Please help me with this!!!Reinstall AutoCAD and relaunch teh program. AutoCAD leaves the GPU in a bad power state in Mavericks, which causes problems.
-
My girlfriend has recently purchased the new 13" Macbook Air (3rd gen Intel processor). It is the base model (ie. 1.8GHz i5 processor, 4GB RAM, etc).
I have checked on the autodesk website for their Windows 64-bit autocad system requirements and they all seem to be met, even to the recommended levels. However we havent actually tried running it because we havent gotten a copy of Windows on the machine yet. Also, she has a rendering software called Rhino, which ran fairly smoothly on my pc (its about 2 years old but was top of the line then), but I feel we are not up to par on the system requirement "OpenGL graphic card recommended".
If anyone could offer some guidance as to weather we should keep the MacBook Air it would be appreciated. I think the alternative would be to buy a Windows laptop because of cost, which wouldn't be nearly as exciting.It's not a hard core gaming rig, but it plays all the FPS games I like, quite well. It handles hi-def video, just fine. I use it for Photoshop, and it is quite fast. For web browsing, it has no equal. The 2010 maxed out 11" would do it all, except for some hi-def video (1080P), which it would stutter. But my new 2011 maxed 13", is perfect for video (1080P=no problem).
I really don't think a MBP will give you as much, on a daily basis. It (the MBP) has only a few advantages, and except for the built in optical drive (which you can still go external, if need be), none of the advantages you will miss even slightly.
I think the MBP would only serve me, if it spent most of the time deskbound, but I would still need an SSD. Once you have had an SSD, you can't go back. Then, you would have a really pricey MBP. -
hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.
System Requirements for AutoCAD 2013 for Mac:
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Direct3D®-capable workstation-class graphics card
3ds Max 2014 and 3ds Max Design 2014 are available for windows only:
System requirements for 3ds Max 2014 and 3ds Max Design 2014
Windows 8 or Windows® 7 64-bit Professional operating system
64-bit Intel or AMD multi core processor
4 GB RAM minimum (8 GB recommended)
4.5 GB free disk space for installation
3-button mouse
Latest version of Microsoft® Internet Explorer®, Apple® Safari®, or Mozilla® Firefox® web browser
Recommened Mac:
15-inch MacBook Pro with Retina display : 15.4-inch (diagonal) LED-backlit display with IPS technology
2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors
Hardware
2.4GHz quad-core Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
512GB Flash Storage
Autodesk AutoCAD 2014 for Windows vs AutoCAD 2013 for Mac
USER INTERACTION Windows Mac
Command line
✓
✓
Multifunctional grips
✓
✓
Dynamic input
✓
✓
Auto-complete command entry2
✓
✓
Hide and isolate objects
✓
✓
Create and select similar objects
✓
✓
Delete duplicate objects
✓
✓
Properties palette
✓
✓
Quick properties palette
✓
Quick view
✓
✓
In-canvas viewport controls
✓
✓
Editable UCS icon
✓
✓
Layer tools3
✓
✓
Layer groups
✓
✓
Layer state manager4
✓
New layer notification
✓
Filter
✓
Quick select
✓
DesignCenter
✓
Tool palettes
✓
Content palette
✓
Navigation bar
✓
ShowMotion
✓
Coverflow navigation
✓
Multi-touch gestures
✓
AutoCorrect command entry
✓
File tabs
✓
DOCUMENTATION
Geometry creation & measurement tools
✓
✓
Parametric constraints
✓
✓
Associative arrays
✓
✓
Copy array
✓
✓
Object and layer transparency
✓
✓
Strike-through text
✓
✓
Blend curves
✓
✓
Multiple hatch editing
✓
✓
Sheet set manager
✓
Project manager
✓
Dynamic blocks5
✓
✓
Model documentation tools
✓
Table style editing
✓
Hatch creation preview
✓
Multiline style creation
✓
Digitizer integration
✓
Change space
✓
Express tools6
✓
Text align
✓
DESIGN
Solid, surface, and mesh modeling
✓
✓
Surface curve extraction
✓
✓
PressPull
✓
✓
Autodesk materials library
✓
✓
Material creation, editing, and mapping
✓
Basic rendering
✓
✓
Sun properties7
✓
✓
Visual styles7
✓
✓
Advanced rendering settings
✓
Camera creation
✓
Walkthroughs, flybys, and animations
✓
Autodesk ReCap point cloud tool
✓
Import Sketchup files (SKP)
✓
Geographic location
✓
CONNECTIVITY
External references (DWG)
✓
✓
Image underlays
✓
✓
PDF underlays
✓
✓
DWF underlays
✓
DGN underlays
✓
In-place editing of DWG references
✓
✓
Batch publish
✓
✓
Publish or plot to PDF
✓
✓
Plot styles
✓
✓
Plot style table editor
✓
✓
AutoCAD WS connectivity
✓
✓
Autodesk 360 connectivity
✓
Data links
✓
Data extraction
✓
Hyperlinks
✓
Markup set manager
✓
dbConnect manager
✓
eTransmit
✓
WMF import and export
✓
FBX import and export
✓
SAT import and export
✓
✓
Additional model import
✓
Design feed
✓
Share on Facebook
✓
LICENSING
Standalone licensing
✓
✓
Network licensing
✓
✓
Cross-platform licensing
✓ -
Autocad on the MacBook Pro retina display
If I download windows on the MacBook Pro with retina display does autocad have the same features as if it was the real windows?
If you install Windows by using Boot Camp Assistant to partition the drive IT IS REAL WINDOWS and works the same as any other Windows install.
-
Anyone using AutoCAD on a MacBook Pro? I will be loading AutoCAD soon and wonder if there are any issues to avoid.
ThanksI am currently running Vista through Bootcamp on my SR Macbook Pro with AutoCAD 2006 installed along with Inventor 2008; both work flawlessly. I ran both through parallels and Fusion for a while, but neither ended up being very responsive. Also ran them on XP installed in bootcamp for a while and they again both ran great.
Running in Bootcamp AutoCAD is more responsive on my laptop than on the computers we have to use here at school -
i want to buy macbook air 13, can i use designing software like AUTOCAD, solidworks, and some heavy games, like Maxpayne 3 and Some more in AIR 13??
Welcome to Apple Discussions.
Read the system requirements for the programs you listed. Match them against the specifications of the machine you propose to buy. The more RAM the better, your hard drive size requirements and video card specicications may require the upgraded, not base, model or may eliminate the MBA as a platform. -
My daughter is an architecture student at UF, we bought her a MacBook Pro with Bootcamp and Windows. We have had no problems until she tried to download and install AutoDesk onto the Windows Side. THis is what she sent me,"AutoCAD Architecture (all three versions on the educational site)
"Error creating process
<C:DOCUME~1\Hana\LOCALS~1\Temp\IXP000.TMP\Install.exe>. Reason:
C:\WINDOWS\system32\advpack.dll"
this is in the process of trying to download any of the versions in the
first installing the Autodesk Student Community Tool; .NET Framework.
When she calls Autodesk they won't support her can anyone shed any light on this? i would greatly appreciate it.
Thankspfbittner wrote:
When she calls Autodesk they won't support her can anyone shed any light on this? i would greatly appreciate it.
Well, she should call back again and speak to someone else. They probably say they can't help because she's on a Mac. But you must tell them that Macs are PCs just like anything else you can buy out there...they just happen to run Mac OS as well as Windows, and if she's purchased their software she's entitled to support from them.
You can also search Google for "Reason: C:\WINDOWS\system32\advpack.dll"
You'll find many threads on it with possible solutions, but based on what I've seen you may not have the .Net 2.0 Framework installed. Regardless though, this is not really a Mac issue -
Autocad help for macbook ?
is it ok if I installed autocad 2013 while my macbook is 2GB memory ( Autocad 2013 needs at least 3GB) ?
It will run Autocad very slowly and may crash your Mac.
In any case 2GB of RAM is far too little. -
Macbook autocad incompatible pourquoi?
bonjour j'ai un macbook sous snox leopard osx 10.6.8 10K549 et je ne peux pas installer le logiciel autocad car il me dit que la carte graphique n'est pas prise en charge que dois je faire?
dois-je changer de carte graphique pour pouvoir utiliser ce logiciel indispensable pour mes etudes ou carrement changer d'ordinateur? si oui lequel il me faudrait? merciJe ne crois pas que vous pouvez mettre à jour la carte graphique dans un Macbook. En tout cas, pour exécuter Auto Cad vous avez besoin d'un ordinateur plus rapide.
Il ya une application appelée TurboCAD. Les versions précédentes ne fonctionnent sur les anciens Mac. J'ai utilisé la version 3 sur un système d'exploitation Mac sous 10.6. -
Few days back I installed Autocad 2014 in my macbook pro 15" early 2012.For few days it worked fine but since last two days I'm getting graphical lag in my mac. Finger gestures and dock movement all seems to be lagging badly.Please help.I'm using mavericks
We regularly use Cocktail by Maintain software. You run the whole gamut of options but the important one is in System - Databases - Rebuild launch services. Also in Files - Caches - then clear the lot.
This is just houskeeping really but there are so many 'links' in A/cad it needs 'cleaning' -
Which macbook is perfect for autocad?
This summer I start an education. This requires that you install AutoCAD on your computer.
Since I have a three year old Sony laptop, I hardly think that it will be able to run such a program.
Do you have a good suggestion for the laptop that will be suitable to run such a program? Thinking maybe just the computer must have a pretty good graphics card. I have been looking at a MacBook Pro, but there are other alternative than that?This summer I start an education. This requires that you install AutoCAD on your computer.
Since I have a three year old Sony laptop, I hardly think that it will be able to run such a program.
Do you have a good suggestion for the laptop that will be suitable to run such a program? Thinking maybe just the computer must have a pretty good graphics card. I have been looking at a MacBook Pro, but there are other alternative than that? -
Is MacBook 2.2 capable of running AutoCad
Hi-
Long time Mac owner that knows virtually nothing about how these things work. Need to purchase a new machine and will be running autoCad for interior design work. Also quite cheap. Can I pick a refurb. MacBook, upgrade some memory and run Autocad. Have a friend that seems to do this quite well-but everyone at Apple tells me that its just an impossibility. Any suggestions?I'm running a ArchiCAD on my mac and it works fine, it is similar to AutoCAD in some way. Do you want to install to windows on Mac, or are you trying to run it in OSX? I don't think there is AutoCAD for mac platform.
Just make sure you have 2GB+ RAM. -
Can macbook air run autocad application smoothly?
I would like to know if macbook air is capable enough to run Autodesk Autocad software smoothly, without any problem or leg?
No reason why it wouldn't. Of course overall performance would depend on the exact specs of the Macbook.
http://knowledge.autodesk.com/support/autocad-for-mac/troubleshooting/caas/sfdca rticles/sfdcarticles/System-requirements…
However, pretty much any Macbook will have more than enough resources to run it correctly. -
AUTOCAD MACBOOK PRO 13in HELP!
I bought a new macbook pro 13in this August and i am wondering if Autocad 2011 will work. I only need to use it for one semester and i just one to know if anything bad will occur to my laptop if i try to use this program. I also want to know if it will be usable even if it is kind of slow, and if i can use it with OS LION?
Read through this thread:
https://discussions.apple.com/message/15994336#15994336
Maybe you are looking for
-
Hi,i want to know suppose that i click withdraw button can i be able to see which java code it's calling so that i can add some code to it to customize it. Plz,help me out since i have a urgent requirement in my project. Thanks and regards, [email pr
-
Hi I've just bought a Scanjet G3110 which I've installed on a Dell T1700 PC runing Windows 7 64 bit. The Scan to Email button doesn't work, it just prompts me to save the scan to a file, this is not what I expected. Can anyone offer any suggestions a
-
NHL Gamecenter AppleTv3 in Scandinavia?
Can anyone help someone who lives in Scandinavia to get nhl game center on Apple TV3? How do I go step by step? Having understood that I need to change dns address. Will the nhl app up automatically after restart and on / off power? Can I pay for acc
-
Optimizing this query....
I have a query for the following select x.date_required, sum(x.t_score) as t-score from (select tv.business_date as date_required, sum(tv.score) as t_score from table1 tv where tv.type like 'blue' union all select ta.business_date as date_required, s
-
Unresolvable conflict on update (qt conflicts with qt-copy)
Hi! I use Archlinux with kde-svn. And after some time without updating the whole system, I have got this problem since a few days: pacman -Syu :: Starting full system upgrade... resolving dependencies... looking for inter-conflicts... :: qt conflicts