AutoCenterTransform on rotate effect not working !!!

Is there a workaround or known bug fix for the fact that the autoCenterTransform=true is not working for the rotate effect.
I tried this with the spark Rotate effect control and played it in IE with FlashPlayer 10.3.1818.14 and also on Firefox with FlashPlayer 10.2.153.1
Even Adobe's sample here isn't working.
http://help.adobe.com/en_US/flex/using/WS6C251DAF-9EBC-4a79-820B-E4AA5B2ADCE8.html#WS4A706 08A-1304-4463-8FC6-B4ABC41078A8
I also tried using the old mx Rotate effect like this, and it is no longer working with Flex 4.5 SDK.
<mx:Rotate id="rotateEffect" target="{this}" originX="{this.width/2}" originY="{this.height/2}"
angleFrom="0" angleTo="360" duration="2000" repeatCount="1" effectEnd="rotateEndHandler()"/>
This rotate effect using Flex 3.6 sdk works fine using the FlashPlayers listed above.
<mx:Rotate id="rotateEffect" target="{this}" angleFrom="0" angleTo="360" duration="2000" repeatCount="1" effectEnd="rotateEndHandler()"/>

I found a workaround for my custom Button that I had built to rotate itself around it's center and was being used inside a mx VBox. I wrapped the whole thing in a spark Group component which I set to the same size as the Button and then put that Group inside my VBox that was set with horizontalalign and the button now rotates properly on it's center point.

Similar Messages

Thinkpad Helix - Screen auto rotation does not work (Issue 3/3)

Hi,
I have installed a clean Windows 8.1 on the Helix and have several issues. Putting them into several threads so they can be answered independently.
The first thing I did after installing the system (and critical Windows Updates) was running the Lenovo System Update tool and downloading everything.
Screen rotation does not work. In “Device Manager” I can see “C5621 gw Mobile Broadband Geolocation Sensor” and “Hid Sensor Collection”. The HID one has an exclamation mark next to it. Are there some drivers I need to download to make this work. I did of course check if screen rotation is not locked – it is not (I did turn it on/off a couple of times, without any effect). Manual rotation (using display settings) works fine.
Thank you in advance for any help,
Łukasz
Solved!
Go to Solution.

Hi Lukasz,
Try, in device manager, right click on HID Sensor Collection then uninstall. Reboot, and see if the driver is loaded properly, if not click on scan for hardware changes.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

What's going on with ios8... Screen rotate does not work anymore, wifi doesn't work very well anymore and apps are crashing or running slow... Come on Apple sort this mess out

ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
first the the screen rotation is not working... Checked the settings and lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly.... come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......

Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily.

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

Lighting Effect not work in CS6*

Why Filter/ Render/ Lighting Effect not work in CS6?
It's not work only in CS6 Beta or in anything else :-/. It's Useful with me

A bit more information would be helpful. What is happening on your system when you go to lighting effects?
What system are you running on? What video card are you using? Are you using the most recent driver?
Do check our system FAQ as GPU is requried for lignting effects to work properly.
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Pattie

After Effects not working in Mavericks

Is anyone having issues with Adobe After Effects not working in Maveriks? Premeire, Photoshop, Audition all work, but not AE. No update from Adobe available.

This update is ONLY FOR MAVERICKS. You can't update through Creative Cloud, to prevent users of other operating systems from installing it.

Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

I have installed the latest HP Support Assistant for windows 10 and I have installed the updates Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings I have checked the box of "Allow the screen to auto-rotate" In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424) In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them In User Account I have created a new user with password. Auto-rotate did not work in that user But all these have not worked. Please find a solution for me. About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work

Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

OpenAL sound effects not working .. Please Help

Hi
I ported OpenAL to our platform and able to play the wav files.
I wrote a sample openal application and try to produce some sound effects.
Play back of audio is working but sound effects are not working.
I am using jungle.wav which is mono channel sound wave file as input
# The Code snippet used is mentioned below.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>
#define NUM 2
alutInit(0,0) ;
alGetError();
SourcesPos[0] = SourcesPos[1] = SourcesPos[2] = 0.0f;
ListenerPos[0] = ListenerPos[1] = ListenerPos[2] = 0.0f;
ListenerOri[0] = 0.0f;
ListenerOri[1] = 0.0f;
ListenerOri[2] = -1.0f;
ListenerOri[3] = 0.0f;
ListenerOri[4] = 1.0f;
ListenerOri[5] = 0.0f;
alListenerfv(AL_POSITION, ListenerPos);
alListenerfv(AL_ORIENTATION, ListenerOri);
alGenBuffers(NUM, Buffers);
Buffer[0]= alutCreateBufferFromFile("/Res/jungle.wav");
err = alutGetError();
alGenSources(NUm, Sources);
alSourcei (Sources[0], AL_BUFFER, Buffers[0] );
alSourcef (Sources[0], AL_REFERENCE_DISTANCE, 25*2);
alSourcefv(Sources[0], AL_POSITION, SourcesPos);
SourcesPos[0] = 200;
SourcesPos[1] = 200;
SourcesPos[2] = 25;
alSourcefv(Sources[source], AL_POSITION, SourcesPos);
alSourcePlay(Sources[source]);
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>
I am expecting the sound to be played in the right headphone/speaker.
But the sound is played in both the headphones.
I used wave device and generated the output.wav file.
In that file also the sound is played in both the headphones.
I used the following settings for configuring OpenAL alsoft.conf.
Someone please help me the error in the above code.
Does OpenAL able to generate the right sound or left sound effect depending on the co ordinates
format = AL_FORMAT_STEREO16
cf_level = 0
frequency = 44100
refresh = 4096
sources = 256
stereodup = false
drivers = osp // Our platform
excludefx =
layout_STEREO = fl=-90, fr=90
layout_QUAD = # Sets the speaker layout when using quadriphonic output.
# Available speakers are back-left(bl), front-left(fl),
# front-right(fr), and back-right(br).
# The default is:
bl=-135, fl=-45, fr=45, br=135
layout_51CHN = bl=-110, fl=-30, fc=0, fr=30, br=110
layout_61CHN = sl=-90, fl=-30, fc=0, fr=30, sr=90, bc=180
layout_71CHN = bl=-150, sl=-90, fl=-30, fc=0, fr=30, sr=90 br=150
device = default
periods = 0
capture = default
mmap = true
[wave] # Wave File Writer stuff
file = # Sets the filename of the wave file to write to. An empty name
# Default is empty
volume = 100
Thanks
Swaroop

Hi,
You might want to check out connect.creativelabs.com to see how they can help you.

Lighting effect not working for photoshop CC 2014

hello there i can not seem to get the lighting effects working in Photoshop cc 2014 i updated it and also made sure my graphic driver was updated and also made sure that it was strong enough to run it and it is so now i'm just confused why its not working.
not sure what to do from here need to get some textures done and this does not help and couldn't find anwsers on the adobe contact us tab so came here.

I could repro this. Fix it by restarting Photoshop.
What happens is that when you toggled your graphics acceleration on without restarting Photoshop, it made Photoshop go coo-coo for Cocoa Puffs. (It happens.) Hopefully, someone from Adobe's staff will see this.

Clip name effect not working correctly in 2014/2014.1

I'm referring to these notes from the latest bug fixes here...
Bugs fixed in Premiere Pro 2014.1 Release | Premiere Pro work area
"Clip name effect doesn’t work correctly if Source Track is set to a different track."
"The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip."
I've just updated Premiere (2014.1) to specifically fix these two bugs. The Clip name effect isn't using the correct file names. It uses something close but not quite e.g. clip 100 shows as 100B which is down the timeline.
The effect is applied to a transparent layer (have also tried it in a black video layer) and the clip name drawn from a different video track (video/PNGs in track 1, transparent video and effect is in track 3). This problem only appears when videos are in the timeline. When used with stills (PNGs) it works fine.
Any idea of a fix or workaround that isn't using some kind of titling filter? I'm looking to automate the shot naming process for a pipeline in creating animation animatics and this would be perfect. If to actually worked properly.
Using Premiere on a Mac Book Pro with 10.9.5.

Anyone from Adobe care to offer some insight as it's something that is reportedly fixed?

Why is ken burns effect not working on individual slides I have amended when sent to iDVD

When making a slideshow in iPhoto, I changed the zoom and scan on individual slides as instructed in the Help dialog; these showed perfectly when played. However, when I shared the slideshow to iDVD, those particular slides were just 'still' and there was no Ken Burns effect at all. Why did this happen?

The Slideshow was created in iPhoto and then shared to iDVD. The Ken Burns effect works on all the photos that used the basic "Ken Burns' setting. However, on some of the photos I tried to amend the scanning to zoom into particular faces or parts of the photo. When I played the slideshow in iPhoto, these amended photos were exactly as I wanted, but after 'sharing' it and viewing it in iDVD, those photos I had altered were 'frozen' and the Ken Burns effect did not work at all, neither the automatic version, nor the specific way I had set it. All the other photos still had the Ken Burns effect as expected. I am using iPhoto 11, 9.1.5, I haven't had this problem in the past.
If you have any ideas why this should have happened I'd be grateful.
Thanks

Eye Dropper tool in After Effects Not working Properly

I am using Adobe After Effects CS5 on a mac. And most all of the eyedropper tools in the software are not working properly. They always select a way different color than it should be. What is wrong?
One day they just all decided to not work. Its really frustrating. Its been a few weeks now.

Well, For some strange reason its working just fine today. I did restart my computer yesterday and after that it seems to be working.
I haven't recenitly messed with my hardware acceleration/graphics card or monitor color profile. So if that was it, then it did it on its own.
None the less its working now. Thank you for your help!!!

Sound effects not working after upgrade

After upgrading to Yosemite, my system sound effects are no longer working. Instead of hearing my selected Basso sound, my entire screen flashes. Other sounds, such as the audio track of a video, still work fine. If I use the "afplay" command I can hear a system sound. I also get sounds for incoming and outgoing mail. But clicking one of the system alert sounds in the "Sounds" preference pane does nothing audible, and in other places where I used to get a Basso sound, my screen flashes instead. I'm aware of the Accessibility option that gives the screen flash in lieu of an audible alert, but that is turned off, and I have tried turning it on and back off again, to no avail. My "Alert volume" is all the way up in the "Sounds" preference pane, and I've slid that back and forth too.
Can anyone suggest a way to reset whatever got confused in the upgrade, and get my alert sounds back?
I'm on a 13" mid-2009 MacBook Pro, if that matters.
Thanks!

I had same exact problem - Reset PRAM and not works fine. I followed instructions here, and step 5 fixed it: http://www.iphonetopics.com/no-sound-after-upgrading-to-os-x-yosemite/

Photo Booth Effect not working

I upgraded to 10.4.8 and 75% of my Photo Booth effects stopped working. There is only a blank screen instead of a camera image. Has anyone else experienced this problem. Photo Booth worked great before the upgrade. I have a 20" iMac intel. Any suggestions would be appreciated!
iMac Mac OS X (10.4.8)

Hi OH~IO,
Welcome to the Apple Discussions
First try Repairing Permissions, with the Disk Utility in Applications/Utilities. This will read your Receipts folder for the latest Permissions based on the Updates.
Next, if that does not work try deleting com.apple.Photobooth.plist for your Home/library/Preferences Folder and restarting Photo Booth.
6:25 PM Wednesday; November 22, 2006

Ken Burns Effect not working as expected.

Hi,
I have created a slideshow in iPhoto 08 and want to have all of the slides use the ken burns effect except the first one (i want this to be a 20 second title photo). To get this to work, i have disabled the Automatic Ken Burns effect in the settings menu and then clicked the Ken Burns checkbox in all of the photos from the second one onwards. Even with these checkboxes selected, the photos just stay still and the ken burns effect does not work. Am i going about this the wrong way?
Any ideas appreciated.
Joe.

I believe that if you do not use the automatic ken burns effect you need to set the effect for each photo - pick one or two and with the KB slider to the left set the view for the beginning photos and then slide the slider to the right and set the end view - then it will transition between those two (I'm thinking that you can turn auto automatic and override it for just the first slide by making the start and end the same so the transition does not really do anything
Try that first (it is easier )
LN

AutoCenterTransform on rotate effect not working !!!

Similar Messages

Maybe you are looking for