AutoCommit Setting for the Microsft OleDB Provider for Oracle(MSDAORA)

Hi,
The default setting for the AutoCommit(MSDAORA) is "On". can any one please tell me how to set this Off.
thanks

To use 32 bit oraoledb, you'll need to set IIS to run in 32 bit mode.
Or, install 64 bit oledb/client instead.
Hope it helps,
Greg

Similar Messages

  • Cant connect to Ora8.1.6 db using OLEDB provider for Ora8.1.7 cant find 8.1.6 OLEDB

    Hello,
    I need to connect to an Oracle 8.1.6 Database using OLEDB. Currently, we have one workstation with an ODBC connection and has an OLEDB Provider for Oracle 8.1.6. I can connect to Oracle using OLEDB on this machine (Winnt4 SP4) and see data from the tables. But I need to connect to the same Oracle DB from another workstation (Winnt4 SP6).
    I dowloaded the OLEDB Provider for Oracle8i from the Oracle Website, and on install I observed that this one was for Oracle 8.1.7. I keep getting an error message that it can't resovle the Service Name. I have played with the Net8 Configuration assistant for Oracle8i and the other selection for Oracle8.0 or 7.0. But I keep getting the same error on the NT SP6 machine. I have looked at the tnsnames.ora file on the SP6 machine and the SP4 machine. They are different, and I tried to make the .ora file on the SP6 machine match the .ora file on the SP4 machine but still can't resolve the Service Name. I would be very grateful if someone could help me out - either finding an earlier OLEDB Provider or some configuration trick.
    Many thanks,
    Rich Protzel

    Did you ever get this issue resolved? Do you know where I can get the Oracle Provider for OLE DB for 8.1.6?
    Aaron

  • RC0: RS Installation Problem - The credentials you provided for Reporting Services service are invalid. To continue ...

    Hi
    When installing 2008 RC0 I get the following error message:
    "The credentials you provided for Reporting Services service are invalid. To continue, provide a valid account and password for the Reporting Services service.
    Error code: 0x84B40000"
    During the installation process it never prompted for the credentials to be used for the Reporting Services service (i.e. the Reporting Services service did not appear under the "Service Accounts" tab during the Server Configuration stage of the installation. The other services did appear). In the "Ready to Install" stage the Account under Reporting Services, Service Configuration is given as "udefined". Everything else installed without a problem.
    Any help would be appreciated.
    Thanks.
    Egmont

    I had a same and similar issue.
    I finish the installation by providing SQL Agnt and SQL Service by NT AUTHORITY\NETWORK SERVICE and blank password. Once complete the installation I changed the Service Account by services.msc to SQL SA account.
    Reason: Service account is not granted for Log on as Service.
    Solution: Grant the SA to Log on as Service.
    Abu
    Bad Idea When you first install Microsoft SQL Server to run under a Microsoft Windows NT account, SQL Server sets for that Windows NT account various Windows user rights and permissions on certain files, folders, and registry keys. If you later change the startup
    account for SQL Server (the MSSQLServer service) and the SQL Server Agent service by using SQL Server Enterprise Manager (SEM) or SQL Server Configuration Manager (SSCM), SEM automatically assigns all the required permissions and Windows user rights to the
    new startup account for you so that you do not have to do anything else. We recommend that you use this is the approach to change the service account.
    http://support.microsoft.com/kb/283811

  • PhoneGap - The sdk location provided for WebOS is not valid

    I am trying to get the phone PhoneGap Building Setting correct.
    I am getting an error "The sdk location provided for WebOS is not valid, Please verify your setting.
    I don't know what path I should select.
    I have the sdk software installed and Dreamweaver CS6.

    I can share a document on Acrobat.com (I just verified this), but I can't send one for shared review. Same error message as before. Curiouser and curiouser!
    Date: Wed, 31 Mar 2010 08:13:29 -0600
    From: [email protected]
    To: [email protected]
    Subject: "The file destination provided is not valid. Enter a valid location."
    Has the version of Acrobat that you're using been packaged by your IT department? If so, can you find out if they perhaps disabled access to Acrobat.com. Sometimes in doing this, shared reviews are inadvertently disabled.
    >

  • OLEDB Provider for Teradata - 64 bit

    Hi,
    We want to install OLEDB Provider for Teradata - 64 bit in Windows Server 2012 for SharePoint 2013 Excel Services connection refresh.
    Please let us know from where to download them.
    Thanks in advance.
    Regards
    K.V.B.Gururaaja

    Hi Gururaaja,
    Here is an article of Data Sources Supported in PowerPivot Workbooks which includes Teradata relational databases (Teradata V2R6, V12), you can take a look.
    https://msdn.microsoft.com/en-us/library/gg399082(v=sql.110).aspx
    http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2012/12/21/powerpivot-for-sharepoint-scheduled-refresh-to-oracle-ibmdb2-sql-en-us.aspx
    And I find Teradata OLE DB Provider from the below link, please take a look, and also I would recommend you post this question in teradata forum for more accurate information and better assistance.
    http://downloads.teradata.com/download/connectivity/ole-db-provider
    http://forums.teradata.com/forum/connectivity/ssis-2012-ole-db-teradata-provider-tdoledb-1
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have
    feedback for TechNet Subscriber Support, contact [email protected]
    Daniel Yang
    TechNet Community Support

  • Does the iMessage protocol provide for "online status" indication?

    In iChat, I could set the online status of my AIM account ("Available", "Away", etc.).
    Does the iMessage protocol provide for "online status" indication?

    HI,
    Messages Beta can do the same indications for the older style iChat Buddy List the same as iChat does/did.
    The iMessage Login (the "Account" in the Messages Menu > Preferences > Accounts that deals with sending iMessages to iPhones and iPads) does not have the same indicators.
    What it does do is indicate the options in the "To" spot for the Name that is currently shown there.
    To explain that a bit further.
    When you click New Message the Blue Plus icon appears
    You can select Contacts from this list and navigate to a Contact in the Address Book
    Once you select a Contact their Name is in the "To" spot
    If you now click this it becomes a Drop down and the iMessage details they have are marked with a blue Speech bubble.
    IF you select an iMessage Contact this way and they are Off Line the name will go red.
    9:53 PM      Monday; May 14, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix?  Thx.

    In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix? 
    I also notice that each contact says iCloud in it twice, but when I go to iCloud.com, there are no duplicates either. Help..

    mdd770,
    Try Contacts>Preferences...>Accounts...remove {-}/re-add {+}your iCloud account.
    If that is not successful, follow the steps listed in iCloud: Troubleshooting iCloud Contacts.

  • Set up the output GR slip for RE (customer return) Order Type

    Dear Experts,
    I need to set up the output GR slip for RE (customer return) Order Type
    Kindly let me know how can I do this in SAP
    Regards
    Shetty

    Hi,
    As I understand your question, you need to set up an output type for printing Goods Receipt in Sales Order (RE) - perhaps when the RE order is saved. For this, you can follow the following steps. Also you need to take the help of an ABAPer to develop a form which prints as per your requirement.
    For configuring the output, follow the steps
    a. Go to SPRO>Sales and Distribution > Basic Function > Output Control > Define Output type.
    b. Create a new output type (Eg: ZTRE)
    c. Create a new Access Sequence and put in the required condition tables... The Key combination may be Document Type / Customer or Document Type /  Sales Orgnaization / Distribution Channel. etc.
    d. Assign the access sequence to the new output type.
    e. Create a new ouput procedure and assign new output type to it.
    f. Assign this new output procedure to the document type.
    g. In Tcode: VV11 maintain the condition record for Output type ZTRE.
    When the output type is created, a form and a program needs to be assigned to it so that the requirement of GR slip gets printed. You have to take the ABAper's help for the same. You have to mention the fields which have to be printed on the GR Slip. You can do the same for delivery document as well.
    Else you can go to Tcode: NACE to do the same configuration. You have to select V1 for Sales documents.
    Hope this answeres your question
    Thanks
    Mukund S

  • Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

    hi
      i'd like to ask question about linked server.
      my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
    for linked server"
      but in fact for test connection i was told "the test connection to the linked server succeeded".
      could  anyone help me? thank u very much
    best regards
    martin

    Hi, 
    In addition to Tracy's post we have to know those answers as well:
    * what provider are you using for the connection
    * what do you connect to
    for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
    please post the connection string (without the password!) + the query that you are trying to use.
    [Personal Site] [Blog] [Facebook]

  • How can I set up the canon printer mf4380dn for macbook pro MD318

    I can not set up the canon printer mf4380dn for macbook pro MD318 even thought I set up the printing driver already. The printer usually work good for printing via windows laptop.
    I tried some way but error appear "unable to verify the printer on your network". I printing IP is available

    Upgrade your RAM to at least 4GB's.  Your machine can support 6GB's, but upgrade to 4GB's first. Regardless of what Apple says, you need at least 4GB's to run Lion properly.

  • HT201412 Perfectly fine working iPad and I attempted to load the software update provided for settings. Now, all I get is a black screen with an, on again, off again apple. Restore? iTunes doesn't even recognize the device. Force quit does nothing. Now wh

    Hello,
    Perfectly fine working iPad and I attempted to load the software update provided for settings. Now all I get is an on again off again apple. Attempted hard reset to no avail. iTunes no longer recognizes the device. So......? what? how? where?
    Thanks, Richard

    And one more point, I am not an Apple user. This is my first experience and have had to learn as I go. So any explanations please break it down for a noob. I am fairly computer geeky but when it comes to Mac or Apple or iAnything... I have zero experience.

  • How to set up the "incoming Mail server" for google apss account

    how to set up the "incoming Mail server" for google apss account

    The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server.  You'll have to ask them about it.

  • Error while generating CW kin for the new BG created for Taiwan

    HiAll,
    Please provide your help to resolve this issue,
    Iam getting error while generating CW kin for the new BG created for Taiwan, China.
    Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
    Please let me know, is there any step missed to create CW kins for new BG's.
    Thanks-
    Sowmya.
    Edited by: user13419037 on Jul 2, 2012 3:41 AM

    Hello ,
    Your solution can be solved by enabling the displayed check Box in Location Address DFF
    Thanks
    Bindu

  • Ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset.

    ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset. is there anything i can do to fix this or am i screwed?

    If you have music that was purchased on different iTunes accounts than the one you use, then you must provide the password, otherwise the tunes are not considered yours.  You can turn off iCloud and just use the usual USB sync method.  But I wonder whether you'll have the same problem?

  • An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

    Hello
    i got this error in step2
    Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
    here is full summary
    > Bootstrap-CsComputer
    Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
    Checking prerequisites for bootstrapper...
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Host name: lync.rcc.local
    Disabling unused roles...
    Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
    Checking prerequisites for roles...
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Checking prerequisite PowerShell...prerequisite satisfied.
    Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
    Checking prerequisite SupportedServerOS...prerequisite satisfied.
    Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
    Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
    Checking prerequisite IIS...prerequisite satisfied.
    Checking prerequisite IIS7Features...prerequisite satisfied.
    Checking prerequisite ASPNet...prerequisite satisfied.
    Checking prerequisite KB2646886Installed...prerequisite satisfied.
    Checking prerequisite BranchCacheBlock...prerequisite satisfied.
    Checking prerequisite WCF...prerequisite satisfied.
    Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
    Checking prerequisite VCredist...prerequisite satisfied.
    Checking prerequisite SqlNativeClient...prerequisite satisfied.
    Checking prerequisite SqlClrTypes...prerequisite satisfied.
    Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
    Checking prerequisite UcmaRedist...prerequisite satisfied.
    Checking prerequisite WinFab...prerequisite satisfied.
    Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
    Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
    Checking prerequisite RewriteModule...prerequisite satisfied.
    Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
    Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
    Installing any collocated databases...
    Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
    An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
    what should i do?
    Please help me

    Hi,
    The issue may be related to disk read and write cache. Here is a similar case for your reference:
    http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

Maybe you are looking for