Autocomplete doesn't work for packages that were just installed

After installing a program with pacman, I wasn't able to use autocomplete in bash or zsh for that program, even though I was able to run it. If I made a new terminal autocomplete worked fine, it was only in the terminal I had just used to install the application where the autocomplete didn't work. I found out after a while that I can manually run `hash -r` after installing a package to get this to work. Is there any way I could do this automatically after installing a package, or is there another way I could get autocomplete to work right after installing a package?

Your .zshrc is only read when you start a new shell: https://wiki.archlinux.org/index.php/Zs … tion_files

Similar Messages

  • Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

    Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

    So, you're totally new to computers?
    Go to the Help menu in Photoshop and select the System Info menu item.  Copy all that information and paste all of it here MINUS your serial number.
    Yes, Photoshop can delegate a lot of the computing tasks to the GPU on your graphics card.  You may have to disable that feature in Photoshop Preferences > Performance.

  • The location bar autocomplete doesn't work for certain letters.

    This is a really specific problem, the dropdown autocomplete for the location/awesome bar does not work if what I'm typing starts with the letter 'k'.

    Your .zshrc is only read when you start a new shell: https://wiki.archlinux.org/index.php/Zs … tion_files

  • HT6030 Unread mail count still doesn't work for any mail accounts after installing the Nov. 7 Mail fix. I deleted Gmail from my Mac Mail so that's not the problem.

    I still cannot get an Unread Mail count in the Dock even after installing the the Nov. 7 Mavericks update. I deleted my Gmail account from my Mac, so I know that's not a problem. I checked the Mail preferences, and thay is configured correctly. Any suggestions?

    Point noted re multiples posts [ there were loads of  typos in previous]   . Your previous reply  may indeed be one way of  solving my problem. Thanks .
    Nevetheless  why does Apple prodcue "updated " software which isnt properly comptiable or tested;  with the result that it   now  doesnt work well with Gmail when the prevoius version worked fine. You would think an update  would at least work with Gmail as  well as the prevsoius version did.  G mail is  very widely used, so they, Apple,  and probably  Google too are  shooting themselves in the foot if they can't make the software compitable,

  • [Solved]Gnome-pacman asking to upgrade packages, that were removed

    Dear Archers
    I have removed from my system 'eog', 'cheese' and other gnome packages that I do not use. Today, when I  tried to upgrade, it is including the removed packages also. Is it now like this? All or none?
    [root@KRISHNA san2ban]# pacman -Syu
    :: Synchronizing package databases...
    core 101.8 KiB 159K/s 00:01 [######################] 100%
    extra 1389.9 KiB 74.5K/s 00:19 [######################] 100%
    community 1647.0 KiB 62.9K/s 00:26 [######################] 100%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    Targets (153): accountsservice-0.6.18-1 at-spi2-atk-2.4.0-1
    at-spi2-core-2.4.1-1 atk-2.4.0-1 baobab-3.4.1-1
    brasero-3.4.1-1 cantarell-fonts-0.0.8-1 caribou-0.4.2-1
    cheese-3.4.1-1 clutter-1.10.2-1 clutter-gst-1.5.4-1
    clutter-gtk-1.2.0-1 cogl-1.10.2-1 colord-0.1.19-1
    cups-pk-helper-0.2.2-1 dconf-0.12.0-1 eog-3.4.1-1
    eog-plugins-3.4.0-1 evince-3.4.0-1
    evolution-data-server-3.4.1-1 folks-0.6.9-2
    gcalctool-6.4.1.1-1 gconf-3.2.5-2 gcr-3.4.1-1
    gdk-pixbuf2-2.26.1-1 gdm-3.4.1-2 gedit-3.4.1-1
    geoclue-0.12.0-5 gjs-1.32.0-1 glib-networking-2.32.1-1
    glib2-2.32.1-2 glibmm-2.32.0-1 gmime-2.6.9-1
    gnome-applets-3.4.1-1 gnome-backgrounds-3.4.1-1
    gnome-bluetooth-3.4.0-1 gnome-color-manager-3.4.0-2
    gnome-contacts-3.4.0-1 gnome-control-center-3.4.1-1
    gnome-desktop-1:3.4.1-1 gnome-dictionary-3.4.0-1
    gnome-disk-utility-3.4.0-1 gnome-documents-0.4.1-1
    gnome-font-viewer-3.4.0-1 gnome-games-3.4.1-1
    gnome-icon-theme-3.4.0-1 gnome-icon-theme-extras-3.4.0-1
    gnome-icon-theme-symbolic-3.4.0-1 gnome-keyring-3.4.1-1
    gnome-media-3.4.0-1 gnome-menus-3.4.0-1 gnome-nettool-3.1.1-1
    gnome-online-accounts-3.4.1-1 gnome-panel-3.4.1-2
    gnome-power-manager-3.4.0-1 gnome-screensaver-3.4.1-1
    gnome-screenshot-3.4.1-1 gnome-search-tool-3.4.0-1
    gnome-session-3.4.1-1 gnome-settings-daemon-3.4.1-1
    gnome-shell-3.4.1-1 gnome-system-log-3.4.1-1
    gnome-system-monitor-3.4.1-1 gnome-terminal-3.4.1.1-1
    gnome-themes-standard-3.4.1-1 gnome-user-docs-3.4.1-1
    gnome-utils-3.4.0-1 gnome-video-effects-0.4.0-1
    gobject-introspection-1.32.1-1
    gsettings-desktop-schemas-3.4.1-1 gstreamer0.10-bad-0.10.23-1
    gtk-vnc-0.5.0-1 gtk3-3.4.1-1 gtkmm3-3.4.0-1
    gtksourceview3-3.4.1-1 gucharmap-3.4.1.1-1 gvfs-1.12.1-1
    gvfs-obexftp-1.12.1-1 icu-49.1.1-1 iproute2-3.3.0-1
    libchamplain-0.12.2-1 libcroco-0.6.5-1 libgdata-0.12.0-1
    libgnome-keyring-3.4.1-1 libgnomekbd-3.4.0.2-1
    libgsf-1.14.23-1 libgweather-3.4.1-1 libgxps-0.2.2-1
    libimobiledevice-1.1.1-3 libmusicbrainz4-4.0.0-1
    libpeas-1.4.0-1 libplist-1.8-2 libquvi-0.4.0-3
    libquvi-scripts-0.4.2-1 libreoffice-base-3.5.2-1
    libreoffice-calc-3.5.2-1 libreoffice-common-3.5.2-1
    libreoffice-draw-3.5.2-1 libreoffice-en-GB-3.5.2-1
    libreoffice-gnome-3.5.2-1 libreoffice-impress-3.5.2-1
    libreoffice-math-3.5.2-1
    libreoffice-postgresql-connector-3.5.2-1
    libreoffice-sdk-3.5.2-1 libreoffice-sdk-doc-3.5.2-1
    libreoffice-writer-3.5.2-1 librsvg-2.36.1-1
    libsocialweb-0.25.20-1 libsoup-2.38.1-1 libsoup-gnome-2.38.1-1
    libsystemd-44-5 libtracker-sparql-0.14.0-3 libwacom-0.4-1
    libwebkit3-1.8.0-2 libwnck3-3.4.0-1 libxklavier-5.2.1-2
    man-pages-3.39-1 mash-0.2.0-1 metacity-2.34.3-1
    mousetweaks-3.4.1-1 mutter-3.4.1-1 mx-1.4.3-2
    nautilus-3.4.1-1 nautilus-sendto-3.0.2-1
    network-manager-applet-0.9.4.1-1 networkmanager-0.9.4.0-2
    nmap-5.51-3 pango-1.30.0-1 pyatspi-2.4.0-1
    pygobject-devel-3.2.0-1 pylint-0.25.1-1
    python-egenix-mx-base-3.2.3-1 python-logilab-astng-0.23.1-1
    python-logilab-common-0.58.0-1 python2-gobject-3.2.0-1
    raptor-2.0.7-2 seahorse-3.4.1-1 sound-juicer-3.4.0-1
    sushi-0.4.1-1 telepathy-glib-0.18.1-1 telepathy-logger-0.4.0-1
    telepathy-mission-control-5.12.0-1 totem-3.4.1-1
    totem-plparser-3.4.1-1 tracker-0.14.0-3 udisks2-1.94.0-1
    vinagre-3.4.1-1 vino-3.4.1-1 vte-common-0.32.1-1
    vte3-0.32.1-1 yelp-3.4.1-1 yelp-xsl-3.4.1-1 zenity-3.4.0-1
    Total Download Size: 243.26 MiB
    Total Installed Size: 1290.16 MiB
    Net Upgrade Size: 205.83 MiB
    Proceed with installation? [Y/n] n
    [root@KRISHNA san2ban]#
    Removed unwanted packages manually
    Last edited by San2ban (2012-04-24 17:02:50)

    Anyway, as usual, I have to manually remove unused packages. Earlier, only tose packages that were explicitly installed, were upgraded. Now, it is forcing me to accept all, or none

  • The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that  wifi network

    The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

    I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

    Did you fail to look at the requirements before purchasing?
    All sales are final.  You can try contacting itunes support and asking for an exception

  • Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

    since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

  • Touch ID doesn't work for App Store

    My iPhone 5s touch ID works only on the lock screen. I verified to make sure the fingerprint settings were for both pass code and iTunes or AppStore purchases (which it was) and it doesn't work for a App Store purchases. Help anyone?

    I had the same problem. I did not have restrictions enabled. After reading through similar threads and the Apple support article for using the fingerprint sensor for App Store and iTunes Store, where it says that resteictions cannot be set to "immediately," I decided to enable restrictions and set to "15 minutes." That did the trick for me!

  • With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

  • Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

    Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
    e.g.
    In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
    /content/myproject/-/
    So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
    But the problem is there in following scenario.
    I have an anchor tag as follows.
    <a href="#" id="test"> click here </a>
    And I am assigning the href to anchor through JQUERY.
    <script>
    $("#test").attr("href","/content/myproject/en.html");
    </script>
    Ideally this should have been mapped to "/en.html".
    But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
    How to resolve this.
    Thanks,
    Sai

    In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
    Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
    Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
    Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
    Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
    Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

  • HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

    Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

    Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
    I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
    It's still under 1yr warranty so will have to take to a dealer.
    I'm sorry that's not much help for you but at least you know it's not a unique problem.
    PC   Windows XP  

  • Central Autoreaction Method doesn't work for NW 7.10 in SolMan 7.01

    Hello!
    The central autoreaction method doesn't work for the satellite system
    NW 7.10. For systems with kernel releases 4.6D, 640, 700 this method
    works fine and e-mail alerts are coming.
    The configuration steps I've checked:
    1. Configured SCOT. The mail_send job executes every 5 minutes.
    2. Background dispatching job is released: SAP_CCMS_MONI_BATCH_DP (In
    central CEN/000/DDIC and satellite system SAT/000/DDIC)
    3. Central dispatching job is released: SAP_CCMS_CENSYS_DISPATCHER
    (Only in central system CEN/000/DDIC)
    4. The sapccm4x-agent registered as web service within CEN using
    Create Remote Monitoring for NW 7.10:
    Connection test to SAPCCM4X.<satellite_host>.00 was performed successfully
    5. Created a new autoreaction method by copying method
    CCMS_OnAlert_Email_V2 to the own Z_CCMS_Email_Alert_CEN:
    Function Module - SALO_EMAIL_IN_CASE_OF_ALERT_V2
    Execute Method on Any Server and Only in Central System, triggered by
    CCMS agents
    SENDER (EMAIL_USER) exists in CEN/000 , RECEPIENT - <distr list
    SAP_BASIS in CEN/000>, RECIPIENT-TYPEID - C
    6. Got MTE Classes from NW 7.10 satellite system and assigned this method
    Z_CCMS_Email_Alert_CEN to an MTE-class CCMS_ORAucPSAPSR3 for NW 7.10
    satellite system. The alert is red right now.
    7. The mail_send job doesn't send anything, in SCOT there are no
    sending orders.
    8. Autoreaction status on this alert in CEN in RZ20 - Sent to CEN.
    CEN_CHECKED.
    9. The alert status in RZ20 in CEN - ACTION_REQUIRED. If I execute it
    in manual the alert status changes to ACTIVE, but no email and no
    messages in sending orders in SCOT.
    Please help me to solve this issue.
    Thank you!

    Hi,
    Since you are using RECIPIENT-TYPEID =C i.e. General distribution list, pls ensure to have shared type of list created in SBWP.
    Also pls verify your SCOT configutaion , if apropriate address area i.e. *@abc.com
    Also one point to note that even if you trigger auto reaction method manually via RZ20 , pls check if alert is listed in SOST.
    if yes , that means there is problem in either SCOT configuration or distribution list.
    If alert is not appearing in SOST , that means you need to check auto reaction method parameters;
    Z_CCMS_OnAlert_Email_V2 , here check release section if Auto reaction execution method is checked.
    Regards,
    Rupali

  • Oracle client 9i doesn't work for windows ordinary user

    Hello All,
    I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
    Incorrect environment variable PLUS_DFLT
    Program execution error.
    i also need access to Oracle ODBC driver.
    When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
    The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
    Could not load the setup or translator library
    Very appreciate for any help.
    Regards Arkadiusz Masny

    It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
    HTH Mark F

  • PSPaletteMenu category doesn't work for automation plugins

    Hello,
    I would like to have a menu item under Photoshop "Window" menu for my automation plugin.
    There is a notice in the PIPL.r file that goes with SDK:
    // Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
    // This is currently only enabled for automation plugins.
    PSPaletteMenu ="**Palette**";
    However when write my PiPL res like in example below
    resource 'PiPL' (ListenerResourceID, plugInName " PiPL", purgeable)
    Kind { Actions },
    Name { plugInName "..." },
    Category { "**Palette**" }, // or Category { PSPaletteMenu }
    Version { (latestActionsPlugInVersion << 16) | latestActionsPlugInSubVersion },
    menu is not shown under Window menu :(
    Want to note that if I specify Category { PSHelpMenu } it works correctly and menu item is shown under Help menu. PSPaletteMenu also doesn't work for Listener plugin that ships with PS SDK.
    Looks like plugin is not recognized as automation plugin, but I have correct info.plist props (on MacOS X version)
    What should be done to have my plugin menu item under "Window" menu?
    Regards,
    Mac Developer

    Hi Tom, thanks for your reply. Actually I'm not asking about floating palette (which I actually created and there is no issues observed). I just need my automation (!) plugin entry point to be called with kPSDoIt ("Do It") selector action after menu item is chosen under Window menu. (like it works in case PSHelpMenu)
    In the PIPL.r file that goes with SDK it states that
    // Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
    // This is currently only enabled for automation plugins.
    PSPaletteMenu ="**Palette**";
    Is it documentation issue?
    Regards,
    Mac Developer

Maybe you are looking for