Autoconfig and maintanence mode?

Is autoconfig available from 11.5.8 or 11.5.9? Is there any relation between autoconfig and mainteance mode?

Autoconfig has been available since 11.5.7. You do not have to enable Maintenance Mode in adadmin in order to run Autoconfig, so there is no direct relation. Some patches check to make sure you are in Maintenance Mode before you can apply them.

Similar Messages

Difference between Simple maintanence and Export mode and Organisation plan

Hi all,
Can any one please explain the difference between Simple maintanence and Export mode and organisational plan in SAP easy access.
Thanks & Regards,
Naga

Expert Mode Infotype Maintenance: This interfaces allows you to edit individually selected objects in OM (Org Units, Positions, Jobs) via infotypes.
Expert Mode: Simple Maintenance Interface (PPOM_OLD) is used to quickly create a new Organizational Plan. As a user, you can pretty much maintain large volumes of data very easily ( i.e create several objects simultaneously), without having to go through the more "Performance Intensive" Org and Staffing interface.
In accessing the Simple Maintenance interface to create your org structure, the initial screen requires you to specify which evaluation path you want to create your org structure.
Organizational Plan: This is what provides you with a complete picture of an enterprise's environment. It comprises elements (objects like Org Units, Positions, Jobs etc) which are used as building blocks for creating an Organizational structure.
Need more information? Let me know.

FireFox 4 Crashes When Started (Both Normal and Safe Mode)

When I open up FireFox 4 (both in normal mode and safe mode) it crashes within a few seconds. It is a fresh install of FireFox 4 but I also have FireFox 3.6 installed as well. The report that was given is:
Add-ons: [email protected]:1.0.6,{5F590AA2-1221-4113-A6F4-A4BB62414FAC}:0.45.6.20100202.1, :1.2,[email protected]:1.0rc1,{8545daff-ad1e-493f-a37e-eed1ac79682b}:1.0,[email protected]:6.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:4.0b1
BuildID: 20100630141702
CrashTime: 1279002364
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1278990773
ProductName: Firefox
ReleaseChannel: beta
SecondsSinceLastCrash: 38
StartupTime: 1279002344
Theme: classic/1.0
Throttleable: 1
URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Vendor: Mozilla
Version: 4.0b1
I have Windows 7 32bit

1. You have a pre-release Beta 1 version of what will become Firefox 4 in like 5 or 6 months. Unless you are intending to test it for flaws and report those flaws to help in the development process, don't use it.
2. Did you create a new Profile for 4.0b1, and are you using that Profile with it? ''That isn't done automatically when you install 4.0b1, and those of us who have been doing the "testing" for many years consider a new Profile as the basis of doing out testing.''
[http://support.mozilla.com/en-US/kb/Managing+Profiles]
IMO, Mozilla is making a huge mistake by directly offering these beta versions to the general public.
Also IMO. if you want to play with 4.0b1, use the Portable Firefox 4.0beta version to minimize any conflicts with a currently installed version of Firefox, and to eliminate the need for creating a new Profile for 4.0 Beta #:
Download Firefox Portable Test to your hard drive and double click the '''FirefoxPortableTest_4.0_Beta_#_English.paf.exe''' file. The entire installation (including a new Profile for "Portable") will be self-contained in the \Program Files\FirefoxPortableTest\ folder and won't interfere with an "official" version that you already have installed. Your Profile will be in the \Program Files\FirefoxPortableTest\Data\profile\ folder.
The "down side" is that Firefox Portable won't launch if any other version of Firefox is already running.
[http://portableapps.com/apps/internet/firefox_portable/test]

Reporting Services in both SharePoint 2013 connected and native mode?

Is it possible to configure Reporting Services (SQL Server 2014) to support both SharePoint 2013 connected mode and local Report Server in native mode on the same server using multiple instances of RS? The reason for this setup is to avoid having to purchase
SharePoint Enterprise CALs for other users than analysts and still be able to publish standard reports to all employees.
Management and analysts -> Custom reports published through SharePoint 2013 Enterprise (SP2013 ECALs and SQL Server 2014 core license). Data alerts and Power View enabled if possible.
All employees -> Standard reports published through Native Mode Report Server (SQL Server 2014 core license). Possible subscriptions.
I find the official documentation a bit lacking in this area but can't find anything stating against the above. It would be greatly appreciated if someone could confirm before planning the installs.
What I'm aiming for is somewhat similar to the "2 Tier Topology" described at: Example
License Topologies and Costs for SQL Server 2014 Self-Service Business Intelligence
With the difference that there is a separate SQL Server 2014 server used both by SharePoint and as a standalone BI-server.
SharePoint EE + SQL Server 2014 EE
Excel Services
SSRS Add-in (Reporting Services, Power View)
SQL Server DB for SP Content, Configuration and Service Application DB:s
SQL Server 2014 EE - SharePoint + Standalone for BI
SSRS SharePoint Mode
SSRS Native Mode
SSAS (Not in SharePoint mode, skipping PowerPivot for now. Would Power View still work?)
SQL Server DB for Data Warehouse
= 1 x SharePoint EE Server Licence, 2 x SQL Server 2014 EE Server Licenses?
Deployment
Topologies for SQL Server BI Features in SharePoint - Actually gives a good overview in the section "PowerPivot for SharePoint
2013 and Reporting Services Three Server Deployment". Just remove PowerPivot Service from Server 1 and change the Analysis Services in Server 2 to a regular native multidimensional mode. Server 2 would also be used for native Reporting Services.
Fallback or even beneficial option to install SSRS in SharePoint mode on the SQL Server instance used for content and configuration?

Hi Daniel Wikar,
As per my understanding, you want to install two SQL Server instances on the same server, and configure one of the Reporting Services to SharePoint integrated mode, another to native mode.
According to my knowledge, multiple instances of Reporting Services on the same computer, where one instance runs in SharePoint integrated mode and the other instance runs in native mode is supported. But we must run all report server instances at the same
level. For example, if we are using SQL Server 2014, all report server instances must be SQL Server 2014.
Besides, Analysis Services and Reporting Services can be installed as standalone servers, in scale-out configurations, or as shared service applications in a SharePoint farm. Installing the services in a farm enables BI features that are only available in
SharePoint, including PowerPivot for SharePoint and Power View.
For more information about Feature Comparison of SharePoint and Native Mode and Supported and Unsupported Configurations, please refer to the following documents:
http://msdn.microsoft.com/en-us/library/ms157231.aspx
http://technet.microsoft.com/en-US/library/bb510781(v=SQL.105).aspx
For detailed information regarding to the license issue, please call
1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

The difference between VTP server and transparent mode on Catalyst Switch.

Hello
I have a question about the difference between VTP server mode and VTP transparent mode on general catalyst switch.
Basically VTP server mode can create and modify VLAN configuration but actually there is not any VLAN configuration through running-config, is it true? When I checked it on Cat3550, certainly there is not VLAN configuration on VTP server mode. But VTP transparent can create VLAN and configuration but does not synchronize with other switch VLAN status. I appreciate any related information and reason of the VTP server mode specification, thank you very much.
[VTP Transparent mode]
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Transparent
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
name TEST-VLAN
[VTP Server mode]
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
Best Regards,
Masanobu Hiyoshi

Hi mhiyoshi,
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Transparent
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
name TEST-VLAN
The above out put indicates that Vlan is created and then mode changed to transparent. i.e why revision no is 0.
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
This indicates that vlan never created in server mode nor learnt from another switch as revision no is 0

What is difference between TEXT mode and BINARY mode?

Hi,
          What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
OPEN DATASET wl_filename FOR INPUT
                          IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET wl_filename FOR INPUT
                          IN BINARY MODE .

Hi vishnu,
1. files like .TXT files are considered to be text,
   and other files like .EXE . DOC etc are binary files.
2. In text files, after each line, there are two
   internal binary characters
one for line feed and another one for newline.
3. But, we don't have any meaning for it,
   when we view such files in notepad, for eg.
   Hence, to only get the understandable content,
   we should open such TXT files, in text mode.
(we can also open them in binary mode,
but we will get two extra characters after each line,
   and such two extra characters are meaningless
for interpreting the text)
4. In binary mode, each byte by byte is considered,
   without any meaning.
regards,
amit m.

What is the diffrence between ASCII and BIN mode

Hello All,
What is the diffrence between ASCII and BIN mode
Regards,
Lisa.

'ASC' :
ASCII format. The table is transferred as text. The conversion exits are
carried out. The output format additionally depends on the parameters
CODEPAGE, TRUNC_TRAILING_BLANKS, and TRUNC_TRAILING_BLANKS_EOL.
'IBM' :
ASCII format with IBM codepage conversion (DOS). This format correspond
to the 'ASC' format when using target codepage 1103. This codepage is
often used for data exchange by disc.
'DAT' :
Column-by-column transfer. With this format, the data is transferred as
with ASC text. However, no conversion exists are carried out and the
columns are separated by tab characters. This format creates files that
can be uploaded again with gui_upload or ws_upload.
'DBF' :
The data is downloaded in dBase format. Because in this format the file
types of the individual columns are included, import problems, for
example, into Microsoft Excel can be avoided, especially when
interpreting numeric values.
'WK1' :
The data is downloaded in Lotus 1-2-3 format.
'BIN' :
Binary format. The data is transferred in binary format. There is no
formatting and no codepage conversion. The data is interpreted row by
row and not formatted in columns. Specify the length of the data in
parameter BIN_FILESIZE. The table should consist of a column of type X,
because especially in Unicode systems the conversion of structured data
into binary data leads to errors.

UI Control options do not appear for TCD mode and Webdynpro mode

Hi guys,
When I open the screen Start option in eCATT for ECC 7.0, there is no options for TCD mode and Webdynpro mode, only have for SAPGUI mode. So pls help to me find the options for these modes.
Thanks in advance,
Thien

Hello Friend,
This has been corrected by 640 SAPKB64023 and 700 SAPKB70016.
Please install the relevant SP to your system.
Thanks.
Eric Monteiro

Cisco Jabber for Windows in Extend and Connect mode and making outbound calls

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

How to record video in black and white mode

Hi,
I am developing a live video recording application and my application have black and white mode recording feature, So please give me some idea about black and white recording.
Thanks
Ram

Your 1200 is fine it will print in B&W using these settings:
in the print driver drop down box, select Color Options and tick the print in Greyscale option
then click in the Presets dropdown and select save as and type in a description such as " Black and White"

Running the report in Bitmap and Character mode

Hi,
We have the reports which can run in both the character mode and Bitmap mode. The only problem I'm facing is font size in the character mode report. If the report is run in Character mode then the font size of the report will be greater. As the sizer is bigger, I'm getting the X symbol in the place of report. Can i reduce the size of the font. I'm using the font Tahoma (8 points). Reports 6i Version and Windows Xp is the OS.
Regards,
Alok Dubey

Hi this may solve u'r problem
In Oracle Reports Designer, bitmap mode, you can make "C"
bold and in a different font and point size than "c". This
is because you are generating postscript output.
Postscript is a universal printer language and any
postscript printer is able to interpret your different
design instructions.
In Oracle Reports Designer, character mode, the
APPLICATIONS STANDARDS REQUIRE the report to be designed in
ONE FONT/ ONE CHARACTER SIZE. Character mode reports
generate ASCII output. In ASCII you cannot dynamically
change the font and character size. The standard is in
effect so a report prints as identically as possible from
both conventional and postscript printers.
by....
stanma

Firefox 18.0.1 consuming excessive CPU--both in Standard and Safe Mode--when accessing Gmail

Firefox 18.0.1 consumes excessive CPU--both in Standard and Safe Modes--when accessing Gmail (in Standard Mode). CPU consumption averages around 56% on my dual-CPU, Windows 7 desktop.
The only way to stop this from happening it to open Gmail in "HTML" mode. When I open Gmail in Standard mode, a "Loading..." status shows at the top of the page. After about 30 seconds, a error window pops-up within the Gmail page saying that there is a performance problem and provides the option to load Gmail in a limited, "HTML" mode. Clicking the HTML Mode link solves the issue. I've been using Firefox for years and have never seen this issue until now.

try this link
*https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix

At odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

at odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

That second one sounds like malware.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Firefox 19 crashes on startup in normal and safe modes.

upon startup, ff19 crashes in both normal and safe modes. I've disabled all add ons and extensions.
XP Pro sp3.
It started crashing occaisionally, then increasingly more often, now, upon startup.
I tried reloading ff19.
I can't start ff with the -p command.
Crash ID: bp-89fc95f5-6efb-4c72-8721-fbf1b2110906
1361302409
1360392309
1358921494
1357934458
1354939166

its not correct crash id.
We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

How to use a single page for create and update mode.

Hi,
I need to develop a single page to be used for both create and update modes.
I am going to use a variable MODE
and i will set this in the emp summary page.
Based on the button clicked by the user i have to render the JSF page.
For tis if the user selects a perticular and cliks on update thn i will pass the empno to the next.
so there in the next i will appy a ViewCreiteria on my View Obj to fetch only that row so that only that emp will be displayed ion update mode.
This is working fione for me.
So now the issue is
when the user clicks on CreatEmp button.
i need to enable my VO for insert operations.
for this i wrote the code like this in the beforePhase event
FacesContext ctx = FacesContext.getCurrentInstance();
ValueBinding valBinding = ctx.getApplication().createValueBinding("#{data}");
BindingContext bContext = (BindingContext) valBinding.getValue(ctx);
DCDataControl dcControl = bContext.findDataControl("DataControl");
Application app = ctx.getApplication();
ApplicationModule am = (ApplicationModule) dcControl.getDataProvider();
System.out.println("After Appmodule initiation");
// get the VO reference and initiate the query
System.out.println("Before Page VO initiation");
PrismDmPageSectionViewImpl vo = (ViewImpl)am.findViewObject("View");
//ViewRowImpl row = (ViewRowImpl) vo.createRow();
/* TO CREATE AN EMPTY ROW*/
Row row=vo.createRow();
System.out.println("New Row is created");
//vo.createKey(row);
vo.insertRow(row);
vo.setCurrentRow(row);
By doing this a new empty page is rendered.
But when i fill up the values and click on ok.. i am getting the error like this..
JBO-27023: Failed to validate all rows in a transaction.
JBO-27027: Missing mandatory attributes for a row with key null of type View3
JBO-27014: Attribute Id in View3 is required
JBO-27014: Attribute PageeId in View3 is required
Please point me out where i am missing.
Thanks

Hi,
In my opinion you are over complicating things.
This is what I do for using the sme page as both create and update without all this code.
1) Create a browse page containing a an adf table with a select one component bound to your view object.
2) Create an additional edit page containing only an edit form containing fields of your view object that your users must enter in order to add or edit rows.
3) Link the pages in the JSF diagram with an "edit" navigation case from browse to edit page and a "return" navigation case from edit to browse (make sure that redirect option is NOT set on both cases)
4) Remove the submit button from the edit page and add two application module bindings for the commit and rollback operations as command buttons in the form footer facet. Make sure that both buttons has an action of return and that their disabled property is set to false. You will probably change their labels to ok and cancel respectively.
5) Drop a create action for your view object from the data control palette inside your page as a command button and set the action property to edit also.
3) Set the action property of the view button to edit
This should basically work without any code from your part. -- at least it does so for me -- if you like to make it a bit more funcy you may add am action listener inside your buttons and set a requeScope variable for example #{requestScope.editing} to true or false depending on the button clicked. Then add a title to your page with a value like #{requestScope.editing == true ? 'Editing record' : 'Adding a new record'}..
Hope that helps.
Thanassis

Autoconfig and maintanence mode?

Similar Messages

Maybe you are looking for