Autoconfig error on dbTier

Hi all experts
When am ruuning adautoconfig on database tier it showing me following error
Verifying connection to the Database
Connection to the Database established
Verifying existance of the table: ADX_PRE_AUTOCONFIG
Table does not exist. Exiting RestoreProfile...
The log file for this session is located at: /u02/ORACLE/orcldb/9.2.0/appsutil/log/ORCL_dev/10271004/adconfig.log
----------------------------------------------------------------

Hi Rameshwar
There isn't much information about this problem, but if you are running 11i then the Metalink note below may be relevant.
Fatal Error Encountered When Running Txkrun.Pl [ID 417817.1]
(Cause: Autoconfig templates files are not up to date)
Regards
Frank

Similar Messages

Autoconfig erroring out in DBTier. after Cloning Patch. 6718351

Hi All,
We are on 11.5.10.2 with 9.2.0.8 fresh implementation.
ADI6
Developer suite 6i patchset19
ATG RUP6
While preparing for cloning using Note 230672.1
Applied 6718351, as post patch application steps create the appsutil.zip after running the autoconfig in aplication tier. transfered to dbtier ORACLE_HOME, UNZIPPED THE SAME AND RAN THE AUTOCONFIG.
It is erroring out in adcrobj.sh
===========
Database tier Autoconfig erroring out as folows.
===========
Executing script in InstantiateFile:
/mexuat/mexicouat/uatdb/9.2.0/appsutil/install/UAT_mexicodb/adcrobj.sh
script returned:
adcrobj.sh started at Wed Feb 4 02:52:29 IST 2009
Parameters passed are : -nopromptmsg
The environment settings are as follows ...
ORACLE_HOME : /mexuat/mexicouat/uatdb/9.2.0
ORACLE_SID : UAT
TWO_TASK :
PATH : /mexuat/mexicouat/uatdb/9.2.0/Apache/perl/bin:/mexuat/mexicouat/uatdb/9.2.0/bin:/usr/ccs/bin:/usr/sbin:/mexuat/mexicouat/uatdb/9.2.0/jre
/1.4.2/bin:/mexuat/mexicouat/uatdb/9.2.0/Apache/perl/bin:/mexuat/mexicouat/uatdb/9.2.0/Apache/perl/bin:/mexuat/mexicouat/uatdb/9.2.0/bin:/usr/ccs/bin:/usr/sb
in:/mexuat/mexicouat/uatdb/9.2.0/jre/1.4.2/bin:/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise-T2000/sbin:/o
pt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /mexuat/mexicouat/uatdb/9.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/mexuat/mexicouat/uatdb/9.2.0/ctx/lib
SQLPLUS Executable : /mexuat/mexicouat/uatdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.8.0 - Production on Wed Feb 4 02:52:29 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
adcrobj.sh exiting with status 1
========
Found the note: 415335.1, We have already done this Patch "5495695" application as a soln to "adgrants.sql" not working after 5989593.
Pl suggest the go-ahead.
Regards
Vasu

Thanks Hsawwan for your timely reply,
I forgot to mv the sqlplus to oracle_home/bin. i did the same and run the autoconfig to succesfull.
======
bash-3.00$ sh adautocfg.sh
Enter the APPS user password:
The log file for this session is located at: /mexuat/mexicouat/uatdb/9.2.0/appsutil/log/UAT_mexicodb/02040352/adconfig.log
AutoConfig is configuring the Database environment...
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /mexuat/mexicouat/uatdb/9.2.0
Classpath : /mexuat/mexicouat/uatdb/9.2.0/jre/1.4.2/lib/rt.jar:/mexuat/mexicouat/uatdb/9.2.0/jdbc/lib/ojdbc14.jar:/mexuat/mexicouat/uatdb/9.2.0/appsutil/java/xmlparserv2.zip:/mexuat/mexicouat/uatdb/9.2.0/appsutil/java:/mexuat/mexicouat/uatdb/9.2.0/jlib/netcfg.jar
Using Context file : /mexuat/mexicouat/uatdb/9.2.0/appsutil/UAT_mexicodb.xml
Context Value Management will now update the Context file
Updating Context file...COMPLETED
Attempting upload of Context file and templates to database...COMPLETED
Updating rdbms version in Context file to db920
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed successfully.
bash-3.00$
=========
Thanks again..
Regards
Vasu

Autoconfig errors

HI,
My Apps-11.5.10.5
RDBMS 9i
clonning was succesfull .....
Skipping the starting of services
INFO : Rapid Clone completed successfully , but the AutoConfig run recorded some errors.
Please review the AutoConfig section in the logfile. If required, you can re-run AutoConfig from command line after fixing the problem
Once Autoconfig issue is fixed , you can start services
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /stageAPP/stageappl
APPSORA.env INSTE8
Directory: /stageAPP/stageappl/admin
adconfig.txt INSTE8
adgetlnxver.sh INSTE8
adjareas.txt INSTE8
adjborg.txt INSTE8
adjborg2.txt INSTE8
adovars.env INSTE8
Directory: /stageAPP/stageappl/fnd/11.5.0/patch/115/import/US
wfautocfg.msg INSTE8
Directory: /stageAPP/stageappl/fnd/11.5.0/resourc

HI,
This is error report-----
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /stageAPP/stageappl
APPSORA.env INSTE8
Directory: /stageAPP/stageappl/admin
adconfig.txt INSTE8
adgetlnxver.sh INSTE8
adjareas.txt INSTE8
adjborg.txt INSTE8
adjborg2.txt INSTE8
adovars.env INSTE8
Directory: /stageAPP/stageappl/fnd/11.5.0/patch/115/import/US
wfautocfg.msg INSTE8
Directory: /stageAPP/stageappl/fnd/11.5.0/resource
appsweb.cfg INSTE8
Directory: /stageAPP/stageappl/fnd/11.5.0/xml
oamextensions.xml INSTE8
Directory: /stageAPP/stageappl/icx/11.5.0/html/US
ICXINDEX.htm INSTE8
Directory: /stageAPP/stageappl/mwa/11.5.0/bin
mwactl.sh INSTE8
Directory: /stageAPP/stageappl/mwa/11.5.0/secure
device.cfg INSTE8
deviceIP.ini INSTE8
mwa.cfg INSTE8
Directory: /stageAPP/stagecomn/html/US
ICXINDEX.htm INSTE8
Directory: /stageAPP/stagecomn/html/bin
appsweb.cfg INSTE8
Directory: /stageAPP/stagecomn/html
txkObjectTag.js INSTE8
Directory: /stageAPP/stagecomn/html/txkcsa
txkLoadXMLInDB.sh INSTE8
Directory: /stageAPP/stageora/8.0.6/bin
adlnk806.sh INSTE8
Directory: /stageAPP/stageora/8.0.6/discwb4
discwb.sh INSTE8
Directory: /stageAPP/stageora/8.0.6/discwb4/util
applypreferences.sh INSTE8
checkdiscoverer.sh INSTE8
registerall.sh INSTE8
registercollector.sh INSTE8
registerpreference.sh INSTE8
registersession.sh INSTE8
registersessionwithlog.sh INSTE8
runcol.sh INSTE8
runpref.sh INSTE8
runses.sh INSTE8
startall.sh INSTE8
startgatekeeper.sh INSTE8
startgkconfig.sh INSTE8
startlocator.sh INSTE8
startoad.sh INSTE8
startosagent.sh INSTE8
stopall.sh INSTE8
stopdisprocess.sh INSTE8
stopgatekeeper.sh INSTE8
stoplocator.sh INSTE8
stopoad.sh INSTE8
stoposagent.sh INSTE8
unregistercollector.sh INSTE8
unregisterpreference.sh INSTE8
unregistersession.sh INSTE8
Directory: /stageAPP/stageora/8.0.6/reports60/server
CGIcmd.dat INSTE8
Directory: /stageAPP/stageora/8.0.6/tools/web60/html
runform.htm INSTE8
runrep.htm INSTE8
Directory: /stageAPP/stageora/iAS/Apache/Apache/bin
apachectl INSTE8
java.sh INSTE8
Directory: /stageAPP/stageora/iAS/Apache/Apache/cgi-bin
printenv INSTE8
test-cgi INSTE8
Directory: /stageAPP/stageora/iAS/Apache/Apache/conf
httpd.conf INSTE8
httpd_pls.conf INSTE8
httpds.conf INSTE8
imeeting.conf INSTE8
oracle_apache.conf INSTE8
security.conf INSTE8
url_fw.conf INSTE8
Directory: /stageAPP/stageora/iAS/Apache/Apache/htdocs/disco4iv/html
disco4iv.xml INSTE8
Directory: /stageAPP/stageora/iAS/Apache/Apache/htdocs/discwb4/scripts
htmlvars.js INSTE8
htmlvars_apps.js INSTE8
Directory: /stageAPP/stageora/iAS/Apache/Jserv/etc
disco4iviewer.properties INSTE8
emailcenter.properties INSTE8
formservlet.properties INSTE8
jserv.conf INSTE8
mobile.properties INSTE8
ssp_init.txt INSTE8
zone.properties INSTE8
zone_restrict.properties INSTE8
Directory: /stageAPP/stageora/iAS/Apache/mapviewer/conf
mapViewerConfig.xml INSTE8
Directory: /stageAPP/stageora/iAS/Apache/modplsql/cfg
cache.cfg INSTE8
plsql.conf INSTE8
plsql_pls.conf INSTE8
wdbsvr.app INSTE8
Directory: /stageAPP/stageora/iAS/bin
adlnkiAS.sh INSTE8
Directory: /stageAPP/stageora/iAS/oem_webstage
oem.conf INSTE8
Directory: /stageAPP/stageora/iAS/soap/webapps/soap/WEB-INF/config
soap.properties INSTE8
soapConfig.xml INSTE8
wsConfig.xml INSTE8
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /stageAPP/stagecomn/admin/install/STAGE_rofdbs5
adgendbc.sh INSTE8_SETUP 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /stageAPP/stageora/iAS/Apache/perl/bin/perl -I /stageAPP/stageora/iAS/Apache/perl/lib/5.00503 -I /stageAPP/stageora/iAS/Apache/perl/lib/site_perl/5.005 -I /stageAPP/stageappl/au/11.5.0/perl /stageAPP/stagecomn/admin/install/STAGE_rofdbs5
txkGenExtSecConf.pl INSTE8_APPLY 1
[BINCPY PHASE]
Autoconfig could not process the following files:
Directory: /stageAPP/stageora/8.0.6/guicommon6/tk60/admin
Tk2Motif_UTF8.rgb BINCPY
Directory: /stageAPP/stageora/iAS/Apache/Apache/fcgi-bin
echo BINCPY
echo2 BINCPY
Directory: /stageAPP/stageora/iAS/Apache/Jserv/conf
jserv.secret.key BINCPY
Directory: /stageAPP/stageora/iAS/Apache/perl/lib/5.00503
CaptureRealClientIP.pm BINCPY
GetRealClientIP.pm BINCPY
AutoConfig is exiting with status 89

Autoconfig error on DB Tier after changing apps password

Hi,
I have changes APPS password in my new cloned instance. Autconfig on db tier encountered below error. we are on application 12.1.2, RDBMS 11.1.0.7, OS RHEL 5.4.
===================================================
Executing script in InstantiateFile:
/u01/oracle/fakieh/db/tech_st/11.1.0/appsutil/install/FTEST_testdb/txkcreateACL.sh
script returned:
You are running txkcreateACL.sh version 120.1
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/fakieh/db/tech_st/11.1.0
ORACLE_SID : FTEST
PATH : /u01/oracle/fakieh/db/tech_st/11.1.0/perl/bin:/u01/oracle/fakieh/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u01/oracle/fakieh/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u01/oracle/fakieh/db/tech_st/11.1.0/perl/bin:/u01/oracle/fakieh/db/tech_st/11.1.0/perl/bin:/u01/oracle/fakieh/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u01/oracle/fakieh/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:.:.
Executable : /u01/oracle/fakieh/db/tech_st/11.1.0/bin/sqlplus
Executing txkcreateACL.sql ...
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Dec 24 10:00:18 2012
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
txkcreateACL.sh: exiting with status 1
.end std out.
.end err out.
===========================================================================
Starting Restore Profile utility at Mon Dec 24 10:00:22 GMT+03:07 2012
Using version 120.4
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : testdb
sDbDomain : fakiehgroup.com
sDbPort : 1521
sDbSid : FTEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@testdb.fakiehgroup.com:1521:FTEST
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testdb.fakiehgroup.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=FTEST)))
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testdb.fakiehgroup.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=FTEST.fakiehgroup.com)))
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Verifying connection to the Database : Could not be stablished
No Restore Profile file created.
Restore Profile utility ran successfully
===========================================================================
adcvmlog.xml renamed to /u01/oracle/fakieh/db/tech_st/11.1.0/appsutil/log/FTEST_testdb/12241000/adcvmlog.xml.12241000
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/fakieh/db/tech_st/11.1.0/appsutil/install/FTEST_testdb
afdbprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/fakieh/db/tech_st/11.1.0/appsutil/install/FTEST_testdb
adcrobj.sh INSTE8_APPLY 1
txkcreateACL.sh INSTE8_APPLY 1
AutoConfig is exiting with status 3
AutoConfig execution completed on Mon Dec 24 10:00:26 2012
Time taken for AutoConfig execution to complete : 0 mins 21 secs
==========================================
Also when i am trying to select from DBA_NETWORK_ACLS its is giving error:
SQL> select count(*) from DBA_NETWORK_ACLS;
select count(*) from DBA_NETWORK_ACLS
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 10481
Session ID: 361 Serial number: 74
Thank You.

I have changes APPS password in my new cloned instance. Autconfig on db tier encountered below error. we are on application 12.1.2, RDBMS 11.1.0.7, OS RHEL 5.4.Did you use FNDCPASS to change the password? -- How to Change Applications Passwords using Applications Schema Password Change Utility (FNDCPASS or AFPASSWD) [ID 437260.1]
If yes, please post the contents of the log file here.
Connected.
ERROR:
ORA-03114: not connected to ORACLEIs your database up and running? Can you connect as sysdba or as system user remotely?
Please make sure that both the database and the database listener are up and running before you run AutoConfig.
Thanks,
Hussein

Autoconfig errors after AD.I.6

Hi
As part of the AD.I.6 post steps we are running autoconfig on the MT(Windows 2000 Server) on 11.5.9 CU2 instance. We are hitting with the autoconfig error
AutoConfig Profile Phase
Running Profile Process 4 of 8 for AD_TOP
Executing script in InstantiateFile:
e:\oracle\intcomn\admin\install\INT_devone\afadmprf.cmd
script returned:
Wed 05/19/2010
12:51a
ECHO is off.
ECHO is off.
Wed 05/19/2010 12:51a
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\intora\8.0.6"
" ORACLE_SID : "
" LOCAL : INT"
" PATH : E:\msvc60\msdev98\BIN;E:\VC98\BIN;E:\msvc60\TOOLS\WINNT;E:\msvc60\TOOLS;e:\oracle\intappl\au\11.5.0\bin;e:\oracle\intappl\fnd\11.5.0\bin;e:\oracle\intappl\ad\11.5.0\bin;e:\oracle\intcomn\util\jre\1.1.8\bin;e:\oracle\INTora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\intcomn\util\unzip\unzip;e:\oracle\intora\8.0.6\bin;E:\oracle\INTora\jdk131\bin;e:\mks\mksnt;C:\WINNT;C:\WINNT\system32"
" LD_LIBRARY_PATH : e:\oracle\intcomn\util\jre\1.1.8\lib;e:\oracle\intora\8.0.6\lib;e:\oracle\intappl\cz\11.5.0\bin;e:\oracle\intora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Wed May 19 00:51:12 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected.
define printer for reports ...
0 rows created.
0 rows created.
Updated profile option value - 1 row(s) updated
     Application Id : 178
     Profile Name : ICX_REQ_SERVER
     Level Id : 10001
     New Value : amli-apps1.AMLI.com:8000
     Old Value : amli-apps1.AMLI.com:8000
Updated profile option value - 1 row(s) updated
     Application Id : 178
     Profile Name : ICX_DEFAULT_EUL
     Level Id : 10001
     New Value : EUL
     Old Value : EUL
Updated profile option value - 1 row(s) updated
     Application Id : 0
     Profile Name : GWYUID
     Level Id : 10001
     New Value : APPLSYSPUB/PUB
     Old Value : APPLSYSPUB/PUB
Updated profile option value - 1 row(s) updated
     Application Id : 0
     Profile Name : TWO_TASK
     Level Id : 10001
     New Value : INT
     Old Value : PROD
declare
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at line 25
ORA-06512: at line 135
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
I have come across an exact hit for this error - 343045.1 but as per this note this note is valid for 11.5.10 but we are on 11.5.9 CU2. The patch readme doesn't have any specific version of apps as pre-req. Could you please confirm whether we could go ahead with this patch?
Thanks

>
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at line 25
ORA-06512: at line 135
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
I have come across an exact hit for this error - 343045.1 but as per this note this note is valid for 11.5.10 but we are on 11.5.9 CU2. The patch readme doesn't have any specific version of apps as pre-req. Could you please confirm whether we could go ahead with this patch?
Yes. You can apply this patch since the error message is exactly same and that patch 3828023 is applicable on 11.5.9.CU2 version
So apply the patch and re-run the auto-config
--Rk

Autoconfig error

Hi,
I am getting autoconfig error at the starting.
I found that the object APPS.FND_MESSAGE is present in the database.
Context Value Management will now update the Context file
Updating Context file...COMPLETED
Attempting upload of Context file and templates to database...ERROR: InDbCtxFile.uploadCtx() : SQLException : ORA-08103: object no longer exis
ts
ORA-06512: at "APPS.FND_MESSAGE", line 192
ORA-06512: at "APPS.FND_MESSAGE", line 298
ORA-06512: at "APPS.FND_MESSAGE", line 397
ORA-06512: at "APPS.FND_MESSAGE", line 374
ORA-06512: at "APPS.FND_GSM_UTIL", line 1064
ORA-08103: object no longer exists
ORA-01403: no data found
ORA-06512: at line 1
java.sql.SQLException: ORA-08103: object no longer exists
ORA-06512: at "APPS.FND_MESSAGE", line 192
ORA-06512: at "APPS.FND_MESSAGE", line 298
ORA-06512: at "APPS.FND_MESSAGE", line 397
ORA-06512: at "APPS.FND_MESSAGE", line 374
ORA-06512: at "APPS.FND_GSM_UTIL", line 1064
ORA-08103: object no longer exists
ORA-01403: no data found
ORA-06512: at line 1
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1144)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2176)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2050)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2959)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:650)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:726)
at oracle.apps.ad.autoconfig.oam.InDbCtxFile.uploadCtx(InDbCtxFile.java:274)
at oracle.apps.ad.autoconfig.oam.CtxSynchronizer.uploadToDb(CtxSynchronizer.java:309)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBCtx(FileSysDBCtxMerge.java:678)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:222)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1579)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:661)
FAILED
COMPLETED
Context Value Management Complete. Check Logs for details

Hi,
Both the packages are valid. APPS.FND_GSM_UTI and APPS.FND_MESSAGE
In fact there are no invalid objects in the database.
I am getting this error while cloning.
From the same source backup, i had performed cloning earlier; but not encountered this error.
No changes done to the source backup.
thx
sunil

Geeting autoconfig error while cloning

I am getting this eeror while cloning.Please suggest me
cinohdbd01sec:/prj2/apps/prj2appl/fnd/11.5.0/patch/115/bin $ tail -50 /prj2/output/log/txkSetSOHM_ac.log
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /prj2/apps/prj2comn/admin/install/prj2_cinohdbd01sec
adgendbc.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /prj2/apps/prj2comn/admin/install/prj2_cinohdbd01sec
adadmprf.sh INSTE8_PRF 1
afadmprf.sh INSTE8_PRF 1
afcpctx.sh INSTE8_PRF 1
afcpgsm.sh INSTE8_PRF 1
ahladmprf.sh INSTE8_PRF 1
aradmprf.sh INSTE8_PRF 1
bisadmprf.sh INSTE8_PRF 1
bisdblrp.sh INSTE8_PRF 1
clnadmprf.sh INSTE8_PRF 1
cnadmprf.sh INSTE8_PRF 1
csdadmprf.sh INSTE8_PRF 1
cseadmprf.sh INSTE8_PRF 1
csfagprf.sh INSTE8_PRF 1
csiadmprf.sh INSTE8_PRF 1
eamadmprf.sh INSTE8_PRF 1
fteadmprf.sh INSTE8_PRF 1
gladmprf.sh INSTE8_PRF 1
jtfadmprf.sh INSTE8_PRF 1
okeadmprf.sh INSTE8_PRF 1
okladmprf.sh INSTE8_PRF 1
ontadmprf.sh INSTE8_PRF 1
paadmprf.sh INSTE8_PRF 1
wipadmprf.sh INSTE8_PRF 1
wshadmprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /prj2/apps/prj2ora/iAS/Apache/perl/bin/perl -I /prj2/apps/prj2ora/iAS/Apache/perl/lib/5.00503 -I /prj2/apps/prj2ora/iAS/Apache/perl/lib/site_perl/5.005 -I /prj2/apps/prj2appl/au/11.5.0/perl /prj2/apps/prj2comn/admin/install/prj2_cinohdbd01sec
adadmat.pl INSTE8_APPLY 256
txkGenExtSecConf.pl INSTE8_APPLY 1
AutoConfig is exiting with status 29
Thanks,
Dave

And one more thing in log file showing this,Hsawwan plz suggest me
SCRIPT RETURNED:
Generate Tns Names
Logfile: /prj2/apps/prj2appl/admin/prj2_cinohappdi01sec/log/06010758/NetServiceHandler.log
Classpath : /usr/jdk1.5.0_12/jre/lib/rt.jar:/usr/jdk1.5.0_12/lib/dt.jar:/usr/jdk1.5.0_12/lib/tools.jar:/prj2/apps/prj2comn/java/appsborg2.zip:/prj2/apps/prj2comn/java
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
.end std out.
.end err out.
Result : FAILED
===========================================================================
Ending Context Value Management System.
===========================================================================
===========================================================================
No uploading of Context file and its templates to database. Database conection failed
===========================================================================
Configuring templates from all of the product tops...

Autoconfig error jtfictx.sh INSTE8_PRF

Hi,
Any one can help me to resolve the issue. The below is the autoconfig log.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /backup/applerpp/erpp1/inst/apps/erpp1_erpp1/admin/install
jtfictx.sh INSTE8_PRF 1
AutoConfig is exiting with status 1
Regards

Hi User;
Please follow below and see its helpfull:
Autoconfig Fails On The Application Tier in running jtfictx.sh [ID 396174.1]
Regard
Helios

Migration from windows to Linux -- Autoconfig Error

Hi DBA's
I am doing Migration from Windows 2000 to Linux 4.0ES Migration.
Application - 11.5.10.2, Database - 9.2.0.6.
Documents Followed
230627.1 - Export/Import Process for Oracle Applications Release 11i Database Instances Using Oracle9i Enterprise Edition
238276.1 - Migrating to Linux with Oracle Applications Release 11i
Till now i have finished as follows.
1) Doc -238276.1
Section 1 completed on the source instance.
2) Doc -230627.1
Section 1, Section 2, Section 3 completed.
3) Now i started 238276.1
Section 2.
Step 1- updated the manifest --- Completed
Step 2- copy appl_top and Common_top -- Completed
Step 3- Clone the AutoConfig XML context file on the Target System -- Completed.
Step 4- Install iAS Oracle Home -- Completed.
Step 5- Apply the Oracle interoperability patches for Red Hat Enterprise Linux -- Ignored
Note- Because My Application is 11.5.10.2.
Step 6- Run AutoConfig setup phase on the Target System -- Error out.
I run the command as follows.
# cd <AD_TOP>/bin
# ./adconfig.sh run=INSTE8_SETUP contextfile=<Target System ctxfile>
[applmgr@aqherp bin]$ ./adconfig.sh run=INSTE8_SETUP contextfile=/s03/oracle/prodappl/admin/PROD_aqherp.xml
Enter the APPS user password: Script execution phase specified: INSTE8_SETUP
The log file for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /s03/oracle/prodappl
ERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jarERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jar Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
The logfile for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
[applmgr@aqherp bin]$
==========================LOG FILE SHOWS=================================================
Starting AutoConfig at Mon Jan 12 20:07:21 2009
Using adconfig.pl version 115.81
Script execution phase specified: INSTE8_SETUP
Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
Please help me to resolve this issue.
Best Regards,
Suresh Gelda

Hi DBA's
I am able to run the autoconfig now, but i am getting errors in that
Please check log file which i am pasting here
Checking version of /s03/oracle/prodcomn/java/jdbc14.zip
File exists
RC-50208: Exception in method TimedProcessProcess.run
Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: Cannot run program "/s03/oracle/prodappl/ad/11.5.0/bin/adident": java.io.IOException: error=2, No such file or directory
File Version: -1
File version could not be obtained
Skipping updating s_fnd_jdbc_stmt_cache_size.
Updated s_fnd_jdbc_stmt_cache_size to 0
Configuring MOVEJSPPAGEREPOS settings ...
Execute SYSTEM command : mv /s03/oracle/prodcomn/html/_pages /s03/oracle/prodcomn
/s03/oracle/prodcomn/html/_pages is moved to /s03/oracle/prodcomn/_pages successfully
ERRORCODE = 1 ERRORCODE_END
.end std out.
*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl)
TIME : Tue Jan 13 12:23:09 2009
FUNCTION: [ Level 1 ]
ERRORMSG: ERROR: Reading /tmp//orainst/unix.rgs: No such file or directory
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 219
     TXK::Error::printMsg('TXK::Error', 'ERROR: Reading /tmp//orainst/unix.rgs: No such file or direct...') called at /s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl line 92
.end err out.
Result : FAILED
===========================================================================
Generate Tns Names
Logfile: /s03/oracle/prodappl/admin/PROD_aqherp/log/01131223/NetServiceHandler.log
     Classpath : /usr/java/jdk1.6.0_11/jre/lib/rt.jar:/usr/java/jdk1.6.0_11/lib/dt.jar:/usr/java/jdk1.6.0_11/lib/tools.jar:/s03/oracle/prodcomn/java/appsborg2.zip:/s03/oracle/prodcomn/java
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
java.lang.Exception: Error while generating listener.ora.
     at oracle.apps.ad.tools.configuration.NetServiceHandler.generate806Listener(NetServiceHandler.java:2503)
     at oracle.apps.ad.tools.configuration.NetServiceHandler.processNode(NetServiceHandler.java:2272)
     at oracle.apps.ad.tools.configuration.NetServiceHandler.main(NetServiceHandler.java:2978)
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 512
ERRORCODE = 512 ERRORCODE_END
.end std out.
.end err out.
================================================================================
Uploading file system Context file and its templates to the database
Context file :
/s03/oracle/prodappl/admin/PROD_aqherp.xml
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : aqherp
sDbDomain : qudrah.com
sDbPort : 1521
sDbSid : PROD
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@aqherp.qudrah.com:1521:PROD
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Failed to upload the Context file to the DataBase
     Uploading Context file and its templates to the database...FAILED
StackTrace:
java.lang.Exception: oracle.apps.ad.autoconfig.oam.InDbCtxFileException: SQLException : ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.FND_GSM_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
     at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBCtx(FileSysDBCtxMerge.java:685)
     at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:222)
     at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1663)
     at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
=========================================================================================
After Setting Environment
ORACLE_HOME          : /tmp/
LD_LIBRARY_PATH          : /tmp//lib:/usr/X11R6/lib:/usr/openwin/lib:/usr/java/jdk1.6.0_11/jre/lib/i386/server:/usr/java/jdk1.6.0_11/jre/lib/i386:/usr/java/jdk1.6.0_11/jre/../lib/i386:/tmp//lib:/usr/X11R6/lib:/usr/openwin/lib
PATH               : /tmp//bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/s03/oracle/proddb/9.2.0/bin
ORA_NLS               : /tmp//ocommon/nls/admin/data
TNS_ADMIN          : /tmp//network/admin/PROD_aqherp
NLS_LANG               : American_America.AR8MSWIN1256
NLS_DATE_FORMAT          : DD-MON-RR
NLS_NUMERIC_CHARACTERS     : .,
NLS_SORT               : BINARY
CONTEXT_NAME          : PROD_aqherp
AD_TOP               : /s03/oracle/prodappl/ad/11.5.0
FND_TOP               : /s03/oracle/prodappl/fnd/11.5.0
TXK_TOP               : /s03/oracle/prodcomn/rgf/PROD_aqherp
APPLTMP : /s03/oracle/prodcomn/temp
TWO_TASK               : PROD
ORACLE_LOCALPREFERENCE     : /tmp//tools/admin
TNS CONNECT STRING     : PROD
SQLPLUS               : /s03/oracle/proddb/9.2.0/bin/sqlplus
Setting of Environment completed.
SQL Command: SELECT language_code||',' FROM fnd_languages WHERE installed_flag IN ('B','I') AND language_code NOT IN ('US', 'SQ','IS','LT','VN')
ERROR DESCRIPTION:
(*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl)
TIME : Tue Jan 13 12:24:40 2009
FUNCTION: TXK::SQLPLUS::validateConnectInfo [ Level 3 ]
MESSAGES:
SQLPLUS executable not found in ORACLE_HOME/bin
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 167
     TXK::Error::abort('TXK::Error', 'HASH(0x810dd30)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 299
     TXK::Common::doError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin', 'undef') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 314
     TXK::Common::setError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 346
     TXK::SQLPLUS::validateConnectInfo('TXK::SQLPLUS=HASH(0x853767c)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 267
     TXK::SQLPLUS::setConnectInfo('TXK::SQLPLUS=HASH(0x853767c)', 'HASH(0x8537880)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 588
     TXK::TechstackDB::_getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 563
     TXK::TechstackDB::getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 147
     eval {...} called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 112
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
======================================================================================================
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /s03/oracle/prodcomn/admin/install/PROD_aqherp
adgendbc.sh INSTE8_SETUP 1
adgenjky.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
txkMultinode.sh INSTE8_SETUP 1
wdbsvr.sh INSTE8_SETUP 1
Directory: /usr/bin/perl -I /usr/lib/perl5/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/5.8.5 -I /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.5 -I /usr/lib/perl5/site_perl/5.8.4 -I /usr/lib/perl5/site_perl/5.8.3 -I /usr/lib/perl5/site_perl/5.8.2 -I /usr/lib/perl5/site_perl/5.8.1 -I /usr/lib/perl5/site_perl/5.8.0 -I /usr/lib/perl5/site_perl -I /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.5 -I /usr/lib/perl5/vendor_perl/5.8.4 -I /usr/lib/perl5/vendor_perl/5.8.3 -I /usr/lib/perl5/vendor_perl/5.8.2 -I /usr/lib/perl5/vendor_perl/5.8.1 -I /usr/lib/perl5/vendor_perl/5.8.0 -I /usr/lib/perl5/vendor_perl -I . -I /s03/oracle/prodappl/au/11.5.0/perl /s03/oracle/prodcomn/admin/install/PROD_aqherp
txkFrmUTF8.pl INSTE8_SETUP 1
AutoConfig is exiting with status 7
Best Regards,

Autoconfig Errors while applying Patch 981770 EBS 12.1.3

I am trying to apply patch 981770 to my recently upgraded 12.1.3 environment and I am seeing the following errors in the Autoconfig log file. Any suggestions on how I can correct this would be greatly apprechiated
Thanks in advance!
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/ora/10.1.3/config
jazn.xml INSTE8
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/ora/10.1.3/j2ee/forms-c4ws/config
jms.xml INSTE8
oc4j-connectors.xml INSTE8
oc4j.properties INSTE8
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/ora/10.1.3/j2ee/forms/application-deployments/forms
orion-application.xml INSTE8
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/ora/10.1.3/j2ee/forms/config
oc4j.properties INSTE8
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/ora/10.1.3/j2ee/oafm/application-deployments/ascontrol
orion-application.xml INSTE8
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/ora/10.1.3/j2ee/oafm/application-deployments/mapviewer/web
orion-web.xml INSTE8
AutoConfig is exiting with status 8

thanks again. I reran auto config and now I am seeing some different errors. Any further suggestions would be greatly appreciated.
Thanks!
Trying to connect using APPS_JDBC_URL
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/admin/install
adgendbc.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /d01/oracle/VIS/apps/tech_st/10.1.3/perl/bin/perl -I /d01/oracle/VIS/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /d01/oracle/VIS/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /d01/oracle/VIS/apps/apps_st/appl/au/12.0.0/perl -I /d01/oracle/VIS/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /d01/oracle/VIS/inst/apps/VIS_vintoracle/admin/scripts/adexecsql.pl sqlfile=/d01/oracle/VIS/inst/apps/VIS_vintoracle/admin/install
afwebprf.sql INSTE8_PRF 1
amscmprf.sql INSTE8_PRF 1
amswebprf.sql INSTE8_PRF 1
bisadmprf.sql INSTE8_PRF 1
bisdblrp.sql INSTE8_PRF 1
clnadmprf.sql INSTE8_PRF 1
cncmprf.sql INSTE8_PRF 1
cseadmprf.sql INSTE8_PRF 1
csfadmprf.sql INSTE8_PRF 1
csiadmprf.sql INSTE8_PRF 1
eamadmprf.sql INSTE8_PRF 1
fteadmprf.sql INSTE8_PRF 1
icxwebprf.sql INSTE8_PRF 1
oksfrmprf.sql INSTE8_PRF 1
wshadmprf.sql INSTE8_PRF 1
Directory: /d01/oracle/VIS/inst/apps/VIS_vintoracle/admin/install
adadmprf.sh INSTE8_PRF 1
afadmprf.sh INSTE8_PRF 1
afcpctx.sh INSTE8_PRF 1
afcpgsm.sh INSTE8_PRF 1
ibywebprf.sh INSTE8_PRF 1
igccmprf.sh INSTE8_PRF 1
jtfictx.sh INSTE8_PRF 1
okladmprf.sh INSTE8_PRF 1
txkJavaMailerCfg.sh INSTE8_PRF 1
txkWebServicescfg.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /d01/oracle/VIS/apps/tech_st/10.1.3/perl/bin/perl -I /d01/oracle/VIS/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /d01/oracle/VIS/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /d01/oracle/VIS/apps/apps_st/appl/au/12.0.0/perl -I /d01/oracle/VIS/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /d01/oracle/VIS/inst/apps/VIS_vintoracle/admin/install
adadmat.pl INSTE8_APPLY 1

Error in dbtier cloning

Hi All,
We are cloning a new test instance from the cold backup of our production. Production is single instance/archive log enabled. However, the target instance is single instance/no archive log. the DB version is 11.1.0.7
When i am running adcfgclone.pl on the database tier, it errors out with the following.
APPS Password : Log file located at /db1/oratrng/db/tech_st/11.1.0/appsutil/log/TRNG_oradapp/ApplyDBTier_11081226.log
| 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Mon Nov 8 12:35:16 2010
ERROR: Failed to execute /db1/oratrng/db/tech_st/11.1.0/appsutil/clone/bin/adclone.pl
The logfile shows the following errors:
ORACLE instance started.
Total System Global Area 1069252608 bytes
Fixed Size 2109352 bytes
Variable Size 427823192 bytes
Database Buffers 624951296 bytes
Redo Buffers 14368768 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/db1/oratrng/db/apps_st/data/system01.dbf'
alter tablespace TEMP1 add tempfile '/db1/oratrng/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/db1/oratrng/db/apps_st/data/temp02.dbf' REUSE
I tried by creating the controlfile manually too but it gave error when i tried to open the database:
SQL> @crctl.sql
ORACLE instance started.
Total System Global Area 1069252608 bytes
Fixed Size 2109352 bytes
Variable Size 427823192 bytes
Database Buffers 624951296 bytes
Redo Buffers 14368768 bytes
Control file created.
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/db1/oratrng/db/apps_st/data/system01.dbf'
I tried to recover the above datafile.
SQL> recover database using backup controlfile until cancel;
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [],
I tried another cold backup(we take cold backups every night) but facing the same issue with another backup also. That's why i think its not an issue with system.dbf file being corrupt.
when i searched metalink for ORA-600 with kcvhvdf_1, i found that it is a bug in 11.1.0.7. bug 9314439.
the bug says:
The problem is that when the datafiles have zero DB ID=0=0x0, the 'create controlfile set database' command is not setting the new DB ID in the datafile headers but only in the controlfile. It then causes the ORA-600 [kcvhvdf_1] to be produced in the recovery due to DB ID mismatch between datafiles (select FHDBI from x$kcvfh) and controlfile (select DBID from v$database).
I verified the above statement and found it true.
SQL> select FHDBI from x$kcvfh;
FHDBI
0
0
0
0
0
0
0
0
0
0
0
select DBID from v$database;
DBID
551459957
The bug states a work around:
If using a cold backup (after a clean shutdown - NORMAL/IMMEDIATE), one workaround is to open the database right after the create controlfile (with no previous recover):
CREATE CONTROLFILE SET DATABASE "DEV2" RESETLOGS ARCHIVELOG ...
alter database open resetlogs;
However, this workaround is not working for me.
Kindly help. Its urgent.
Edited by: muneer.uae on Nov 8, 2010 3:06 AM
Edited by: muneer.uae on Nov 8, 2010 3:08 AM

Hi;
I suggest apply lastest clone patch and try to take clone from beginning,you can also check
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1] << Section 4: Advanced Cloning Options
if you have still error message than you can follow:
Mainly,
1. Create controfile on source(alter database backup controlfile to trace as path)
2. Copy it to your target server
3. Edit control file wiht new settings(like dbname,dbf location etc)
4. startup nomount, than use new CONTROLFILE and create db on target
5. If you db up than enable autoconfig on dbtier via below note:
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]
Section 3: Patching AutoConfig 3.2. Enabling AutoConfig on a New Oracle Home
Regard
Helios

Adconfig error on dbTier...

hi,
when running adconfig.cmd on dbTier returns error below
the system cannot find the batch label specified - GET_DIRNAME
AutoConfig Wrapper
115.27
the system cannot find the patch specified
the syntax of the command is incorrect
Regards
***SBJ***

Hi,
Application Version:11.5.9 Base
Database Version :8.1.7.4
now only this system under my ctrl first time i try to run adconfig.cmd
befor this i applied AD.i.7 patch
when concurrent manager starts it automatically stop. in cm_log the error for cocurrent manager is
Routine AFPCAL recived failure code while parsing or running your concurrent program CPMGR
so only i am running adconfig.cmd in dbtier &appstier
in appstier only adgendbc.cmd error only
but dbtier when running adconfig.cmd the above post error is appearing.
i am trying to upgrade 11.5.9 to 12.1.1
after the concurrent issue solved only i will apply 11.5.9 CU2 patch
Regards
***SBJ***

Autoconfig Error- jtfictx.sh (INSTE8_PRF 1) ORA-29874: warning in the execution of ODCIINDEXALTER routine

Gurus,
EBS : R12.1.2 (OS Linux)
Database: 11.2.0.3 (OS HP UX Itanium)
I am getting error in autoconfig with jtfictx.sh. I am cloning PROD to QA. Usually I use RMAN duplicate to clone the database and then Application file system are copied. I have performed this method for many times( say 25 times).
This iteration after the database recovery, I ran the RDBMS autoconfig which completed successfully. Then I ran the autoconfig on the concurrent manager server first and received the below error. There are no change of steps from my usual.
Executing script in InstantiateFile:
/ebs02/oracle/inst/apps/SID_servername/admin/install/jtfictx.sh
script returned:
jtfictx.sh started at Sun Sep 8 01:04:11 CDT 2013
SQL*Plus: Release 10.1.0.5.0 - Production on Sun Sep 8 01:04:11 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29874: warning in the execution of ODCIINDEXALTER routine
ORA-29960: line 1,
DRG-10595: ALTER INDEX JTF_AMV_ITEMS_URL_CTX failed
DRG-11422: linguistic initialization failed
DRG-11446: supplied knowledge base file
/u01/oracle/orahome/11.2.0/ctx/data/enlx/droldUS.dat not installed
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 96
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
I usually backup the autoconfig/ context file before the refresh of EBS files from PROD. The previous refresh was performed 2 months ago and it was successful. There is no changes on database ORACLE_HOME as depicted in the error.
I see that someone have had asked similar error in forums and Hussein did recommend some Metalink Note. I did refer that but so far no success. Please do let me know if anyone faced similar issue and how did you solve it?
Notes Referred:
"Jtfictx.sh" Failed During Autoconfig On Application Tier, ORA-29874, DRG-10595 (Doc ID 1271186.1)
Autoconfig Failed On Apps Tier "jtfictx.sh INSTE8_PRF" . Running manually "jtfictx.sh " Failed on "DRG-10758: index owner does not have the privilege" (Doc ID 1357760.1)
Several Scripts Failing With A ORA-29855 Executing ODCIINDEXCREATE Routine During Upgrade To 12.1.1 (u6678700.drv) (Doc ID 1286033.1)
11i : Autoconfig Fails On The Application Tier in running jtfictx.sh (Doc ID 396174.1)
Thanks
Cherrish Vaidiyan

Yes I did and below are the DB components from dba_registry:
Oracle Application Express    APEX_030200    3.2.1.00.12    VALID
OLAP Catalog    OLAPSYS    11.2.0.3.0    VALID
Oracle Data Mining    DMSYS    11.2.0.3.0    VALID
Oracle XML Database    XDB    11.2.0.3.0    VALID
Oracle Text    CTXSYS    11.2.0.3.0    VALID
Spatial    MDSYS    11.2.0.3.0    VALID
Oracle Multimedia    ORDSYS    11.2.0.3.0    VALID
Oracle Database Catalog Views    SYS    11.2.0.3.0    VALID
Oracle Database Packages and Types    SYS    11.2.0.3.0    VALID
JServer JAVA Virtual Machine    SYS    11.2.0.3.0    VALID
Oracle Database Java Packages    SYS    11.2.0.3.0    VALID
Oracle XDK    SYS    11.2.0.3.0    VALID
Oracle Real Application Clusters    SYS    11.2.0.3.0    INVALID
OLAP Analytic Workspace    SYS    11.2.0.3.0    VALID
Oracle OLAP API    SYS    11.2.0.3.0    VALID
Only component invalid is RAC and I dont have RAC for this database.
Thanks
Cherrish Vaidiyan

Autoconfig error after convert to charachter set

Hi all;
I made character set converstion by using adadmin to American_America.UTF8 to WE8ISO8859P9... after this convertion i want to edit my xml file which is in application node.. I edit xml file and i change parameter to:
American_America.UTF8 to American_America.WE8ISO8859P9... I just didnt change one parameter..
its :
<dbcset oa_var="s_dbcset">UTF8</dbcset>
now when i run autoconfig its gives me that error:
************* Start of AD Character-set Conversion session *************
AD Character-set Conversion version: 11.5.0
AD Character-set Conversion started at: Thu Feb 12 2009 09:25:19
ERROR DESCRIPTION:
(*******FATAL ERROR*******
PROGRAM : (/data/CLON/prodcomn/admin/install/CLON_bmuhapp/txkFrmUTF8.pl)
TIME : Thu Feb 12 09:25:19 2009
FUNCTION: TXK::Process::run [ Level 3 ]
MESSAGES:
Command error: <rc> = 512, <command> = /data/CLON/prodappl/ad/11.5.0/bin/adncnv /data/CLON/prodora/8.0.6/forms60/admin/resource/TR/fmrweb_utf8.res utf8 /data/CLON/prodora/8.0.6/forms60/admin/resource/TR/frmweb_WE8ISO8859P9.res WE8ISO8859P9
STACK TRACE
TXK::Error::abort('TXK::Error', 'HASH(0x815425c)') called at /data/CLON/prodappl/au/11.5.0/perl/TXK/Common.pm line 299
TXK::Common::doError('TXK::Process=HASH(0x80c7a68)', 'Command error: <rc> = 512, <command> = /data/CLON/prodappl/ad/11...', undef) called at /data/CLON/prodappl/au/11.5.0/perl/TXK/Common.pm line 314
TXK::Common::setError('TXK::Process=HASH(0x80c7a68)', 'Command error: <rc> = 512, <command> = /data/CLON/prodappl/ad/11...') called at /data/CLON/prodappl/au/11.5.0/perl/TXK/Process.pm line 434
TXK::Process::run('TXK::Process=HASH(0x80c7a68)', 'HASH(0x8ae50a4)') called at /data/CLON/prodcomn/admin/install/CLON_bmuhapp/txkFrmUTF8.pl line 212
eval {...} called at /data/CLON/prodcomn/admin/install/CLON_bmuhapp/txkFrmUTF8.pl line 112
ERRORCODE = 1 ERRORCODE_END
.end std out.
I found this note:
Subject: Running "perl adcfgclone.pl appsTier" Failed on TXKFRMUTF8.PL, fmrweb_utf8.res utf8 Doc ID: 417562.1
in the note, the parameter is in my xml file is %s_at_cset% =WE8ISO8859P9
But i controlled one other instance and this parameter whihc we made convertion successfully its same as upper... My db is UTF8 now.. it can be cause of this error?
Thanks alot
Helios

American_America.UTF8 to American_America.WE8ISO8859P9... I just didnt change one parameter..
its :
<dbcset oa_var="s_dbcset">UTF8</dbcset>What about the following parameters?
<APPL_TOP_CSET oa_var="s_at_cset">WE8ISO8859P9</APPL_TOP_CSET>
<NLS_LANG oa_var="s_tools_nlslang">American_America.WE8ISO8859P9</NLS_LANG>
<NLS_LANG oa_var="s_nlslang">American_America.WE8ISO8859P9</NLS_LANG>
<NLS_LANG oa_var="s_weboh_nlslang">American_America.WE8ISO8859P9</NLS_LANGAs applmgr user, set NLS_LANG to the new value manually and run AutoConfig again.
Note: Make sure you backup your existing context file before modifying it.

Autoconfig errored out Doing RAC conversion 12.1.3

ERROR 1:
APPS_JDBC_URL='jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=xxxx.com)(PORT=XXXX))(ADDRESS=(PROTOCOL=tcp)(HOST=xxxxx)(PORT=xxxx)))(CONNECT_DATA=(SERVICE_NAME=XXXX)))'
Trying to connect using APPS_JDBC_URL
Exception occurred: java.sql.SQLRecoverableException: IO Error: Broken pipe
ERROR 2:
JDBC URL: jdbc:oracle:thin:@XXX:XXX:XXX
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
ERROR 3:
AutoConfig could not successfully execute the following scripts:
Directory: /oracle/appldev/inst/apps/XXXX_xxx/admin/install
adgendbc.sh INSTE8_SETUP 1
Thanks in advance

Please see these docs.
Troubleshooting Autoconfig issues with Oracle Applications RAC Databases [ID 756050.1]
adgendbc.sh fails due to existence of Service name SYS$APPLSYS.WF_CONTROL.. [ID 966642.1]
Service Temporarily Unavailable In Rac Env After Running Autoconfig [ID 267386.1]
Receive Error "Service Temporarily Unavailable" When Accessing WF Home Page On A Rac Database [ID 604415.1]
JDBC Thin Connection Confusion between Service and SID Results in ORA-12505 [ID 420447.1]
adpatch fails with ORA-12505 error in RAC environment on R12 [ID 742371.1]
Thanks,
Hussein

Autoconfig error on dbTier

Similar Messages

Maybe you are looking for