Autodiscover is ok with selfssl but problem in outlook exchange 2013

hi,
Finally i can setup autodiscover service with self ssl, here is the result
Submit
Connectivity Test Successful
Test Details
The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected].
Autodiscover was tested successfully.
Additional Details
Elapsed Time: 18255 ms.
Test Steps
Attempting each method of contacting the Autodiscover service.
The Autodiscover service was tested successfully.
Additional Details
Elapsed Time: 18255 ms.
Test Steps
Attempting to test potential Autodiscover URL https://mail.tulisoft.co.in/AutoDiscover/AutoDiscover.xml
Testing of the Autodiscover URL was successful.
Additional Details
Elapsed Time: 18252 ms.
Test Steps
Attempting to resolve the host name mail.tulisoft.co.in in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 138.91.34.29
Elapsed Time: 146 ms.
Testing TCP port 443 on host mail.tulisoft.co.in to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 260 ms.
Testing the SSL certificate to make sure it's valid.
The certificate passed all validation requirements.
Additional Details
Elapsed Time: 661 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server mail.tulisoft.co.in on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=mail.mail.tulisoft.co.in, Issuer: CN=mail.mail.tulisoft.co.in.
Elapsed Time: 638 ms.
Validating the certificate name.
The certificate name was validated successfully.
Additional Details
Host name mail.tulisoft.co.in was found in the Certificate Subject Alternative Name entry.
Elapsed Time: 0 ms.
Testing the certificate date to confirm the certificate is valid.
Date validation passed. The certificate hasn't expired.
Additional Details
The certificate is valid. NotBefore = 5/5/2014 7:18:25 AM, NotAfter = 5/5/2019 7:18:25 AM
Elapsed Time: 0 ms.
Checking the IIS configuration for client certificate authentication.
Client certificate authentication wasn't detected.
Additional Details
Accept/Require Client Certificates isn't configured.
Elapsed Time: 953 ms.
Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
The Microsoft Connectivity Analyzer successfully retrieved Autodiscover settings by sending an Autodiscover POST.
Additional Details
Elapsed Time: 16229 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://mail.tulisoft.co.in/AutoDiscover/AutoDiscover.xml for user [email protected].
The Autodiscover XML response was successfully retrieved.
Additional Details
Autodiscover Account Settings
XML response:
<?xml version="1.0"?>
<Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<User>
<DisplayName>mailadmin</DisplayName>
<LegacyDN>/o=Tulisoft/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=594a81cd32dc4d488dbf698230a8a5bf-mailadmin</LegacyDN>
<DeploymentId>e2467991-8c60-4245-91b9-1518067363a0</DeploymentId>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<Protocol>
<Type>EXCH</Type>
<Server>[email protected]</Server>
<ServerDN>/o=Tulisoft/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
<ServerVersion>73C08204</ServerVersion>
<MdbDN>/o=Tulisoft/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
<ASUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</ASUrl>
<OOFUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</OOFUrl>
<OABUrl>https://mail.mail.tulisoft.co.in/OAB/22012d7f-80de-41bb-b2bf-4a52355ffdec/</OABUrl>
<UMUrl>https://mail.mail.tulisoft.co.in/EWS/UM2007Legacy.asmx</UMUrl>
<Port>0</Port>
<DirectoryPort>0</DirectoryPort>
<ReferralPort>0</ReferralPort>
<PublicFolderServer>mail.mail.tulisoft.co.in</PublicFolderServer>
<AD>mail.mail.tulisoft.co.in</AD>
<EwsUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://mail.mail.tulisoft.co.in/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=mail.tulisoft.co.in</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=mail.tulisoft.co.in</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tmCreating>
<EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tmEditing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-extinstall>
<ServerExclusiveConnect>off</ServerExclusiveConnect>
</Protocol>
<Protocol>
<Type>EXPR</Type>
<Server>mail.mail.tulisoft.co.in</Server>
<ASUrl>https://mail.tulisoft.co.in/ews/exchange.asmx</ASUrl>
<OOFUrl>https://mail.tulisoft.co.in/ews/exchange.asmx</OOFUrl>
<OABUrl>https://mail.tulisoft.co.in/OAB/22012d7f-80de-41bb-b2bf-4a52355ffdec/</OABUrl>
<UMUrl>https://mail.tulisoft.co.in/ews/UM2007Legacy.asmx</UMUrl>
<Port>0</Port>
<DirectoryPort>0</DirectoryPort>
<ReferralPort>0</ReferralPort>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<EwsUrl>https://mail.tulisoft.co.in/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://mail.tulisoft.co.in/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://mail.tulisoft.co.in/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=mail.tulisoft.co.in</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=mail.tulisoft.co.in</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tmCreating>
<EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tmEditing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-extinstall>
<ServerExclusiveConnect>on</ServerExclusiveConnect>
<EwsPartnerUrl>https://mail.tulisoft.co.in/ews/exchange.asmx</EwsPartnerUrl>
</Protocol>
<Protocol>
<Type>WEB</Type>
<Port>0</Port>
<DirectoryPort>0</DirectoryPort>
<ReferralPort>0</ReferralPort>
<Internal>
<OWAUrl AuthenticationMethod="Basic, Fba">https://mail.mail.tulisoft.co.in/owa/</OWAUrl>
<Protocol>
<Type>EXCH</Type>
<ASUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</ASUrl>
</Protocol>
</Internal>
<External>
<OWAUrl AuthenticationMethod="Fba">https://mail.tulisoft.co.in/owa/</OWAUrl>
<Protocol>
<Type>EXPR</Type>
<ASUrl>https://mail.tulisoft.co.in/ews/exchange.asmx</ASUrl>
</Protocol>
</External>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>mail.mail.tulisoft.co.in</Server>
<ASUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</ASUrl>
<OOFUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</OOFUrl>
<OABUrl>https://mail.mail.tulisoft.co.in/OAB/22012d7f-80de-41bb-b2bf-4a52355ffdec/</OABUrl>
<UMUrl>https://mail.mail.tulisoft.co.in/EWS/UM2007Legacy.asmx</UMUrl>
<Port>0</Port>
<DirectoryPort>0</DirectoryPort>
<ReferralPort>0</ReferralPort>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<EwsUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://mail.mail.tulisoft.co.in/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://mail.mail.tulisoft.co.in/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=mail.tulisoft.co.in</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=mail.tulisoft.co.in</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tmCreating>
<EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-tmEditing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=mail.tulisoft.co.in</EcpUrl-extinstall>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
</Protocol>
</Account>
</Response>
</Autodiscover>
HTTP Response Headers:
request-id: cdaeb3ce-1849-4e7e-8b84-16f43f2507a0
X-TargetBEServer: mail.mail.tulisoft.co.in
X-DiagInfo: MAIL
Persistent-Auth: true
X-FEServer: MAIL
Content-Length: 9094
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Date: Tue, 06 May 2014 15:21:59 GMT
Set-Cookie: X-BackEndCookie=S-1-5-21-1925192757-1526100558-3211384720-500=u56Lnp2ejJqBzM3Ix8qanJzSmZqbx9LLnpnI0sbKmc3Syc7Oys+azsbJyJ7KgYHK0MnQzc/Oy9/MxczOxcrG36+y; expires=Tue, 06-May-2014 15:31:59 GMT; path=/AutoDiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Elapsed Time: 16229 ms.
© 2013 Microsoft | Version 3.2 | Feedback | Privacy | Terms of Use
now when going to setup outlook 2013 its saying
"An Encrypted connection to your mail server not available "
and its not configuring anyway please help..

Hi,
Firstly, I’d like to explain, in Exchange 2013, all Outlook use Outlook Anywhere connect to Exchange server. Autodiscover service just help to get all information that Outlook client needs.
Thus, for the failure of configuring account, I recommend you the following troubleshooting:
1. Try to manually configure the account: please note the server name option should be filled with the user mailbox GUID:
[email protected]
To confirm it, you can run : get-mailbox name |fl exchangeGUID
2. Check if all users cannot be added in all Outlook clients.
3. Check the Outlook Anywhere configuration and certificate:
Get-outlookanywhere |fl
Get-exchangecertificate |fl
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

ITunes will not sync with iPod, but opens MS Outlook '03

When I try to sync my iPod (5th Gen 30GB Vid) with my iTunes (ver: 7.1.1.5) I get the following error: "Attempting to copy to the disk "MOM'S IPOD" failed. You do not have enough access privileges for this operation. iTunes could not save to your Music Folder because you do not have write access. Check the permissions on your Music Folder and folders in your Music Folder, then try copying this file again." Also, for some reason, Outlook 03 opens. I removed Outlook, and still recieved the same error, but this time Outlook didn't open. I also removed iTunes, Quicktime, and Apple Updater. I removed all iTunes entries from the registry, and rebooted. I downloaded iTunes 7.1.1.5 to my hard drive and re-installed all the iTunes stuff again. The error still occurrs. Any suggestions?
Sony Vaio Other OS Vista, 2GB RAM, Office03, 30 GB iPod Video
Message was edited by: waters27863

OK, here's what I did:
I removed iTunes, Quicktime and Apple Updater
Rebooted computer
Searched registry for every iTunes entry and deleted them
Rebooted computer
Searched C drive for anything with iTunes in the name and deleted them
Emptyed the recycle bin
Rebooted computer
Downloaded iTunes 7.1 again
installed iTunes
Syncs like a champ

OWA receives mail long before Outlook (Exchange 2013 with Outlook 2010 and 2013)

I recently upgraded my Exchange environment to Exchange 2013 SP1. The Outlook users are now experiencing a delay when receiving email. When they do arrive they appear in batches, often 20-45 minutes after they were sent, from a mailbox on the same server.
Additionally, the mail appears instantly when you monitor the inbox using OWA. The users are experiencing this on both Outlook 2010 and 2013 clients configured in both cached and non-cached modes. This appears to be a problem with Outlook connecting to Exchange.
Any suggestion about how to correct this would be greatly appreciated. Thanks!

Hi,
From your description, when users use OWA, they can receive emails normally. But if they use Outlook 2010 or Outlook 2013, there is a delay in receiving emails.
I recommend you use the Outlook safe mode to determine whether the problem is caused by add-ins. Also, please make sure users have installed the Outlook latest Service Pack.
If the issue persist, please create a new profile and check the result.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Email problem - Microsoft Outlook exchange

Hi,
I was trying to sync my email, which is provided by Microsoft Outlook Exchange on the website icex.ic.ac.uk with my BB. However, I was having issues.
Interestingly, when I first set up my BB this email worked, at that stage I entered my email details but I did not setup an account in email setup. Then when I chose to setup an account one day, and then within the account setup all my emails it stopped working! Now I cannot find a way of accessing my emails without having an account, so is there a way of going back to the old setup...?
Thank you

Hi and Welcome to the Forums!
It sounds as if you created BIS account credentials -- your BIS account already existed (hosted and controlled by your carrier) and, when only accessing from the BB, credentials are not needed as authentication occurs via PIN. But, to access your BIS account from a PC/browser, credentials are needed as there's no other way to authenticate you to the account. Once you create those BIS credentials, you must use them both from a PC/browser as well as from the device -- but the device should have a tickbox to check that will let it remember your credentials.
If you don't have it, to get to your BIS account via PC/Browser (using those credentials you created), look here:
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
Managing your BIS account from the PC/browser or from the BB is the same thing...it's just two interfaces to the same account. Once you create credentials, you must then forever use them. And credentials are required to access from a PC/browser. Personally, I hardly ever use the device interface to BIS...I much prefer the larger screen, keyboard, etc. of my PC to manage my BIS conduits.
If you want to remove the credentials, you'll need to contact your carrier to completely reset your BIS account back to an initial state.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Exchange 2013 DAG with single site and 2 multi-role servers with error "MapiExceptionIllegalCrossServerConnection"

Hi,
I've got a lab with a domain controller and an Hyper-v with on it two multi-role exchange 2013 CU7 servers on W2K12 R2 OS, configured in DAG semplified (but the problem is the same also if I use the classical DAG configuration), a witness server, and a L7
load balancer for the exchange servers.
When I made the test to disable the OWA application pool where I've got the active mailbox database of the user, the balancer in correct manner redirect the session to the other exchange multi-role server, but the client in his OWA session is no more
able to send new mail with the error "Error your request can't be completed rigt now. Please try again later."
The only strange log that I see on the server in the MAPI client access directory where there is the following error message:
2015-01-21T08:00:45.132Z,956,1,/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=1247f28558d24d4db872ab127b3e5810-Healt,,Microsoft.Exchange.RpcClientAccess.Monitoring.dll,15.0.0.0,Cached,,,,MapiHttp,Client=Microsoft.Exchange.RpcClientAccess.Monitoring,R:4ab7b6c8-54ee-4be3-aa9d-f8c856c4c47c:2,C:MAPIAAAAAOC4+7OCoZOjkqeKuoumlKSEtYO5ibyGs4bc/879z/vD9sX1zP28AwAAAAAAAA==|S:0-mGmHRQ==,OwnerLogon,0x6BB
(rpc::Exception),00:00:00.0310000,"Logon: Owner, /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=1247f28558d24d4db872ab127b3e5810-Healt in database last mounted on Exch2.lab.net",RpcEndPoint: [ServerTooBusyException]
Client is being backed off -> [ClientBackoffException] Mailbox was moved to a different mailbox server. A client needs to retry. -> [IllegalCrossServerConnectionException] Cannot open mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=1247f28558d24d4db872ab127b3e5810-Healt.
-> [MapiExceptionIllegalCrossServerConnection] Monitoring mailbox [] with application ID [Client=MSExchangeRPC] is not allowed to make cross-server calls from [Exch1.lab.net] to [Exch2.lab.net] [diag::AAAOAAAA/wAAAAAAAAAAAgAAAAA=],,,[email protected],
The CAS try to access the mailbox on the other server, but without success.
Someone have idea how to solve?
Thanks

Hi Hinte, sorry for the answer delay.
I've run the command you suggest to check the HealthMailbox status, but seems that all are fine:
[PS] C:\Windows\system32>get-Mailbox -Monitoring | ft name, servername
Name ServerName
HealthMailbox7021deb6ae104dadbf52feedfa7fa68b exch1
HealthMailboxb83c9040b32e4d1197f7f54f6709bb7f exch1
HealthMailboxb1c32037890b43fbb2af2efe7c36ba00 exch1
HealthMailbox8d174269b494458daf9ade5099e22845 exch1
HealthMailboxaa7d10f02d2d4cc588243b291ead3e3a exch1
HealthMailboxeb32c30a019f42968a7cbc49a6ac3e65 exch1
HealthMailboxc6ff1d36ba154c5db5411b44718edcbd exch1
HealthMailbox75dc7caa7e8c4a3b812a01b607536d48 exch1
HealthMailbox16c86e512f454e7890b80c180ce19c00 exch1
HealthMailboxc6e447f7dba24d9b913f1dfcabe9f927 exch1
HealthMailbox40fa5a3f2abc4accae6286cd98abc90a exch1
HealthMailbox2712b9544bad4e7b8b671be2cda8cfde exch2
HealthMailboxe2559124da20499386bf8103dcb21e9b exch2
HealthMailbox3264c6078dad45d4a78c56a3afe81df1 exch1
HealthMailboxacacc51eb8bc4717b295ddf0adccf77e exch2
HealthMailbox64c4dd8cddac4c4e8bb7314010e797b1 exch1
HealthMailbox4a92bfa14fdd47fbb27c19513f6d2beb exch2
HealthMailbox465d2a69de93430e84b4d699a88cb0c3 exch1
HealthMailbox97b578e57cd44204820fffa416b25633 exch2
HealthMailboxb411059771db4647bb775c665ec29440 exch1
HealthMailboxf981dde6f4134f839bf41eb0000434e4 exch2
HealthMailboxc33801c7c3b1474f8aa6065249bb4fca exch1
HealthMailbox2282128ed8d14937998212edd15adf20 exch2
HealthMailboxe3d12b756cf545239b38be4607904ae1 exch2
[PS] C:\Windows\system32>
Regarding the test sugested to diable instead the OWA App Pool only the OWA virtual directory, I've not found on IIS the possibility to stop the access to this virtual directory.
Also on exchnage Administration page there is no the possibility to switch off this virtual directory only (or I don't found where is this setting).
Regards

Exchange 2013 - outlook in LAN environment very slow upload but fast download - not using 'use cached exchange mode'

Hi,
I have Exchange 2013 setup in a new environment (no migration) and it is working great except I just realized there is a big problem.
I notice the following
Problem 1:
Outlook 2010 with sp2 with cached exchange mode on: when I import the pst into outlook, it imports fine but the sync is extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
Problem 2:
Outlook 2010 with sp2 with cached exchange mode off: when I import the pst into outlook, it imports extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
More info:
-user1 has 1GB of mail and when setting up the user on a new pc with outlook with cached exchange mode on, it downloads the mail very fast. It downloads at 40-80 Mbps/sec (bits).
-I have Exchange 2013 with CU3 with win2k12 non r2.
Why is the download so fast from Exchange 2013 but the upload to Exchange 2013 is extremely slow? How do I fix this?
Thanks

I did some more testing.
I setup a test environment with:
-Exchange 2013 SP1 on win2k12 r2
-Outlook 2010 SP2 on windows 7 sp1
-Outlook 2010 SP2 on windows 8.1
-Outlook 2013 SP1 on windows 8.1
Both windows 7 and windows 8.1 have the very slow upload issue to Exchange 2013. Windows 7 upload to Exchange 2013 is around 20-70KB/sec (bytes) via LAN. Windows 8.1 upload is a bit more responsive at around 500-600KB/sec (bytes) via LAN.
I changed the TcpAckFrequency to 1 for windows 7 and 8.1 and the problem went away. The upload on both Windows 7 and 8.1 was going at megabytes after the change.
I hope Microsoft fixes this soon.
PowerShell script to have this automated via GPO:
http://community.spiceworks.com/topic/571571-outlook-slow-after-migrating-to-exchange-2013
PowerShell Script:
$strGUIDS=[array](Get-WmiObject win32_networkadapter -filter "netconnectionstatus = 2" | select -expand GUID)
foreach ($strGUID in $strGUIDS) {New-ItemProperty -path HKLM:\System\CurrentControlSet\services\Tcpip\Parameters\Interfaces\$strGUID -propertytype DWORD -name TcpAckFrequency -value 1}

Why Do i need SCOM 2012 R2 with Exchange 2013 ?

This is a question is commonly asked now a days with the "Managed Service" Feature of Exchange 2013 , why do I still need SCOM for just my Exchange monitoring ?
I have my understanding that still with managed service in exchange there are several component's that needs to be monitored outside the managed service , but I am looking for some nice bullet points.
Please help.

If you are a small shop, then you may not need to spend the money on SCOM to monitor Exchange 2013. However, if you have a large deployement, then you might want to have System Center OM.
While Exchange 2013 does store performance data (configurable I believe) for maybe seven days, you will not have long term trend and performance data. I understand the Exchange 2013 MP is not collecting performance, but this doesn't mean you cannot
replicate what it is doing in a custom management pack for Exchange 2013. Now you will have a single repository for all of your Exchange 2013 servers, where you can see performance history, look at trends, etc.
Furthermore, events that might help you with KHI are going to roll out of the event logs on your exchange servers, unless you are archinving that data, even then, with no centralized location, it will be very hard to keep track of the issues you have experienced.
With SCOM agents sitting on those servers, that data will be stored, again, in a single database, where you can report on KHI's and what not (SLO/SLA included).
Furthermore, we know Exchange 2013 runs checks on potential failover candidates. These checks should come back healthy in order for the server to be considered a good failover candidate. What if these checks detect an issue with a potential failover
candidate? Wouldn't you like to know, so that you can address that before it impacts the Exchange service? Again, this is where SCOM would come in, not just for monitoring for these things, but other issues like network, hardware, software, OS,
etc.
So, like I said, if you are a small shop, you can probably forgo the expenses. If you have a large 2013 environment, then SCOM will be beneficial, but understand that you will probably have to add too the Exchange 2013 managememt pack in order to get
the most out of it (since they stripped this latest version down compared to E2K10 MP).
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Migration Exchange 2010 to Exchange 2013 with CAS Array and DAG

Dear All,
I am starting the migration of Exchange 2010 2 servers (CAS/Mailbox) with DAG no CAS Array to Exchange 2013 with 2 servers CAS array and 2 Mailbox servers with DAG. I read on some blogs that no requirement of CAS array on Exchange 2013. My concern how to
configure NLB on CAS servers for the client to connect.
Please guide and have any deployment guide for this, kindly share.
Thanks

Hi ,
As you said there is no use and meaning of having the cas array in exchange 2013 and also thanks a lot to Microsoft for introducing an single namespace facility in exchange 2013.
My suggestion and Microsoft recommendation should be to go with hardware load balancers for exchange 2013 rather than using the windows NLB and round robin method.
Why we need to go for HLB ?
Disadvantages
of some load balancing methods :
Windows
NLB :-
If you use Windows NLB then it can provide redundancy on server level failure and not on application level.
DNS
round robin :-
In case if we use the windows round robin method for load balancing then it wouldn't provide server level
and application level redundancy during the failures.At the Same time we need to manually adjust the DNS records during the server failure but on the client end dns caches will create the issues.
Configuring NLB for exchange 2013 :
http://msexchangeguru.com/2013/08/14/windowsnlb/
NLB configurations for exchange 2010 and 2013 will be same.
Configuring round robin for exchange 2013 :
http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
Advisable method is to have the CAS and MBX roles on the same box if NLB not comes it to play.Because windows failover clustering and NLB cannot be configured on the same box.In exchange 2013 cas role is a stateless server role so there is no need to have
that role on a separate box.
Thanks & Regards S.Nithyanandham

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

I'm assuming you have Photo Stream set up of both devices. However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.

Hot mail is not working after firefox upgrade. I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week .

I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week after firefox upgrade. After entering login the page freeze. I am not able to continue.
I reviewed the thread. I am not using Foxit.
I reviewed hot mail forum. They suggest firefox upgrade causes this issue.
I tried after clearing my browser's cache and cookies. The situation remain same. Any idea?
What is the workaround?

Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher?

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the things that have a billing problem? I tried to put my voucher code in again but it won't let me do that.

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

Migrating E&M immediate start from 2821 VGW to AS5350XM but problems with signalling

Hi,
We currently have 2821 VGW platforms running E&M Immediate start. The T1s go into the DACS and the IP interface connects to the SIP server with a simple number plan.
So, when a T1 DS0 signals, the VGW talks to the SIP server, the SIP server does a database lookup and talks back to the VGW and passes the connection details.
However we are now migrating to the AS5350XM platform and replicating the config from the 2821 to the AS5350XM is causing signalling issues.
Here is a sample of the existing 2821 config:
voice rtp send-recv
voice service pots
voice service voip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
rel1xx disable
min-se 1700
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
controller T1 1/0
ds0-group 0 timeslots 1 type e&m-immediate-start
ds0-group 1 timeslots 2 type e&m-immediate-start
ds0-group 2 timeslots 3 type e&m-immediate-start
voice-port 1/0:0
define Tx-bits idle 1111
define Tx-bits seize 0000
define Rx-bits idle 1111
define Rx-bits seize 0000
timeouts wait-release 1
connection plar 1000
voice-port 1/0:1
define Tx-bits idle 1111
define Tx-bits seize 0000
define Rx-bits idle 1111
define Rx-bits seize 0000
timeouts wait-release 1
connection plar 1001
voice-port 1/0:2
define Tx-bits idle 1111
define Tx-bits seize 0000
define Rx-bits idle 1111
define Rx-bits seize 0000
timeouts wait-release 1
connection plar 1002
dial-peer voice 1000 pots
destination-pattern 1000
port 1/0:0
dial-peer voice 1001 pots
destination-pattern 1001
port 1/0:1
dial-peer voice 1002 pots
destination-pattern 1002
port 1/0:2
dial-peer voice 1 voip
preference 1
destination-pattern .T
session protocol sipv2
session target ipv4:192.168.150.2:5060
session transport udp
voice-class codec 1
voice-class sip options-keepalive retry 1
sip-ua
retry invite 2
timers trying 150
sip-server ipv4:192.168.150.2:5060
Here is the same on on the AS5350xm:
voice rtp send-recv
voice service pots
voice service voip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
rel1xx disable
min-se 1700 session-expires 1700
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
controller T1 3/0:1
framing ESF
ds0-group 0 timeslots 1 type e&m-immediate-start
ds0-group 1 timeslots 2 type e&m-immediate-start
ds0-group 2 timeslots 3 type e&m-immediate-start
cas-custom 0
define-abcd loop-open 1 1 1 1
define-abcd loop-closure 0 0 0 0
cas-custom 1
define-abcd loop-open 1 1 1 1
define-abcd loop-closure 0 0 0 0
cas-custom 2
define-abcd loop-open 1 1 1 1
define-abcd loop-closure 0 0 0 0
voice-port 3/0:1:0
timeouts wait-release 1
connection plar 1000
voice-port 3/0:1:1
timeouts wait-release 1
connection plar 1001
voice-port 3/0:1:2
timeouts wait-release 1
connection plar 1002
dial-peer voice 1000 pots
destination-pattern 1000
port 3/0:1:0
dial-peer voice 1001 pots
destination-pattern 1001
port 3/0:1:1
dial-peer voice 1002 pots
destination-pattern 1002
port 3/0:1:2
dial-peer voice 1 voip
preference 1
destination-pattern .T
session protocol sipv2
session target ipv4:192.168.150.2:5060
session transport udp
voice-class codec 1
voice-class sip options-keepalive retry 1
sip-ua
retry invite 2
timers trying 150
sip-server ipv4:192.168.150.2:5060
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
What I did notice was the following:
1) When defining loop open and loop closed custom bit configuration is different....on the 2821 you do it on the voice port. On the AS5350, it is not supported on the voice port but appears to be configurable via the T1 controller. I'm not sure if the AS5350 needs any further E&M signalling configuration as the problem lies in the signalling....the AS5350 when the line is cleared down appears to start ringing it again and not following the signalling pattern.
2) When doing a "show voice port" on the AS5350XM does not show E&M signalling, whereas it does on the 2821:
AS5350XM:
5350VGW#sh voice port
DS0 Group 3/0:1:0 - 3/0:1:0
Type of VoicePort is CAS
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Non Linear Mute is disabled
Non Linear Threshold is -21 dB
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancellation NLP mute is disabled
Echo Cancellation NLP threshold is -21 dB
Echo Cancel Coverage is set to 128 ms
Echo Cancel worst case ERL is set to 6 dB
Playout-delay Mode is set to adaptive
Playout-delay Nominal is set to 60 ms
Playout-delay Maximum is set to 1000 ms
Playout-delay Minimum mode is set to default, value 40 ms
Playout-delay Fax is set to 300 ms
Connection Mode is plar
Connection Number is 1000
Initial Time Out is set to 15 s
Interdigit Time Out is set to 10 s
Call Disconnect Time Out is set to 60 s
Ringing Time Out is set to 180 s
Wait Release Time Out is set to 1 s
Spe country is not configured
Region Tone is set for US
Station name None, Station number None
Translation profile (Incoming):
Translation profile (Outgoing):
lpcor (Incoming):
lpcor (Outgoing):
DS0 channel specific status info:
                                      IN      OUT
PORT            CH SIG-TYPE    OPER STATUS   STATUS    TIP     RING
=============== == ============ ==== ======   ======    ===     ====
2821:
2821VGW#sh voice port
recEive and transMit Slot is 0, Subslot is 0, Sub-unit is 0, Port is 0
Type of VoicePort is E&M
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Non Linear Mute is disabled
Non Linear Threshold is -21 dB
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancellation NLP mute is disabled
Echo Cancellation NLP threshold is -21 dB
Echo Cancel Coverage is set to 128 ms
Echo Cancel worst case ERL is set to 6 dB
Playout-delay Mode is set to adaptive
Playout-delay Nominal is set to 60 ms
Playout-delay Maximum is set to 1000 ms
Playout-delay Minimum mode is set to default, value 40 ms
Playout-delay Fax is set to 300 ms
Connection Mode is plar
Connection Number is 1000
Initial Time Out is set to 15 s
Interdigit Time Out is set to 10 s
Call Disconnect Time Out is set to 60 s
Ringing Time Out is set to 180 s
Wait Release Time Out is set to 1 s
Companding Type is u-law
Rx A bit no conditioning set
Rx B bit no conditioning set
Rx C bit no conditioning set
Rx D bit no conditioning set
Tx A bit no conditioning set
Tx B bit no conditioning set
Tx C bit no conditioning set
Tx D bit no conditioning set
Rx Seize ABCD bits = 0000 Custom pattern
Rx Idle ABCD bits = 1111 Custom pattern
Tx Seize ABCD bits = 0000 Custom pattern
Tx Idle ABCD bits = 1111 Custom pattern
Ignored Rx ABCD bits = BCD
Region Tone is set for US
Analog Info Follows:
Currently processing none
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Station name None, Station number None
Translation profile (Incoming):
Translation profile (Outgoing):
lpcor (Incoming):
lpcor (Outgoing):
Voice card specific Info Follows:
Operation Type is 2-wire
E&M Type is 1
Signal Type is immediate
Dial Out Type is dtmf
In Seizure is inactive
Out Seizure is inactive
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Pulse Rate Timing is set to 10 pulses/second
InterDigit Pulse Duration Timing is set to 750 ms
Clear Wait Duration Timing is set to 400 ms
Wink Wait Duration Timing is set to 200 ms
Wait Wink Duration Timing is set to 550 ms
Wink Duration Timing is set to 200 ms
Minimum received Wink Duration Timing is set to 140 ms
Maximun received Wink Duration Timing is set to 290 ms
Minimum seizure Timing is set to 50 ms
Delay Start Timing is set to 300 ms
Delay Duration Timing is set to 2000 ms
Dial Pulse Min. Delay is set to 140 ms
Percent Break of Pulse is 60 percent
Auto Cut-through is disabled
Dialout Delay is 300 ms
Hookflash-in Timing is set to 480 ms
Hookflash-out Timing is set to 400 ms
DS0 channel specific status info:
                                      IN      OUT
PORT            CH SIG-TYPE    OPER STATUS   STATUS    TIP     RING
=============== == ============ ==== ======   ======    ===     ====
0/0/0:0          01 e&m-imd     dorm idle     idle
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Can anyone advise if further configuration is required on the AS5350XM in order to pass the E&M signalling correctly ?

Well for me the forms were ok to open with 11g, just had to correct differences and recompile to run.
That there script is a ton of help!..well you forgot to mention the Output_File parameter, but I could find that myself now that I knew what to look at. Now if I could also set it not to produce .err files when everything went fine and to set the output names so that the old compiled forms get overwritten..
the SRW.* calls turned out to be things used in Reports, so it was hopeless to compile in forms..but also not needed
as for ENABLE_ITEM and DISABLE_ITEM I found these to use as their definitions in a library, that proved sufficient.
procedure enable_item
( p_menuName in varchar2
, p_menuItemName in varchar2
) is
v_menuItem menuitem;
begin
v_menuItem := find_menu_item(p_menuName||'.'||
p_menuItemName);
if (not id_null(v_menuItem))
and (get_menu_item_property(v_menuItem,visible) = 'TRUE')
then
set_menu_item_property(v_menuItem, enabled, property_true);
end if;
end;
procedure disable_item
( p_menuName in varchar2
, p_menuItemName in varchar2
) is
v_menuItem menuitem;
begin
v_menuItem := find_menu_item(p_menuName||'.'||
p_menuItemName);
if (not id_null(v_menuItem))
and (get_menu_item_property(v_menuItem,visible) = 'TRUE')
then
set_menu_item_property(v_menuItem, enabled, property_false);
end if;
end;Some forms still playing with me, but the compilation issues there don't seem to be connected with this topic..and now I got issues with reports >.< but that requires a topic elsewhere. Thanks all!

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Autodiscover is ok with selfssl but problem in outlook exchange 2013

Similar Messages

Maybe you are looking for