Autodiscover URL error in SharePoint 2013

Hi guys,
I want to integrate exchange and SharePoint to send mail from SharePoint. With the reference of this link i have done everything.
http://www.scinaptic.com/support/0109.html
But i didn't import SharePoint FQDN certificate. Because i don't know why it is needed. And i am stuck with this error.
When i tried enable a trust and service permission in SharePoint. I stuck with this error. I search for this error. I read deleting all self-signed certificate from exchange and SharePoint would work. But i have one clarification.
If we delete a self-signed certificate which is given to SharePoint site. Can we able open that HTTPS site ?
Why we need to delete exchange self-certificates ?
I need resolve this. Please help me.
Do i have another way to resolve this ?

You need to import the certificate so the trust can be established. The error is stating that the certificate is not trusted.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Crawl log error in sharepoint 2013 for search services

Dear Support,
please find below mention crawl log error in sharepoint 2013 for search services.
8,597 The server is unavailable and could not be accessed. The server is probably disconnected from the network.
423 This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also
want to crawl this repository during off-peak usage times.
59 Processing this item failed because of a timeout when parsing its contents.
11 The filtering process has been terminated
4 SharePoint returned an empty response.
3 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly.
2 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.
would request your support for resolving this type of issue

1. Are you able to browse the sites on SP server. server is unavailable means that application pool
of that site is down. Check application pool on all server. if you start any application pool. make sure it does not stop few minutes later. you need to update password if it does stop
2. Create a disable loopbackcheck of registry on all servers
http://blogs.technet.com/b/sharepoint_foxhole/archive/2010/06/21/disableloopbackcheck-lets-do-it-the-right-way.aspx
http://support.microsoft.com/kb/926642/en-us
3. Create a new search service application and check if you face same issue.
4. I assume you have change some password or other setting when you started facing this issue. what changes were made in environment
If this helped you resolve your issue, please mark it Answered

How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
Thanks & Regards, Krishna

Hi Krishna,
For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<HideCustomAction
GroupId="Customization"
HideActionId = "ProjectSettings"
Location = "Microsoft.SharePoint.SiteSettings">
</HideCustomAction>
</Elements>
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Microsoft Setup Bootstrapper Error during SharePoint 2013 install using Hyper-V on Windows 8.1

Client Machine
Windows Server 2008 R2 SP1
SQL Server 2012 (11.0.2100.60)
Hosted on Windows 8.1 Hyper-V
Doing a SharePoint Install and during the install (very near completion) I get:
Error log shows the ugly:
2014/01/07 13:36:12:444::[3648] MSI(INFO): 'Action start 13:36:12: ArpWrite.'
2014/01/07 13:36:12:444::[3648] MSI(INFO): 'CustomAction
ArpWrite returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2014/01/07 13:36:12:444::[3648] MSI(INFO): 'Action ended 13:36:12: ArpWrite. Return value 3.'
2014/01/07 13:36:12:444::[3648] MSI(INFO): 'Action ended 13:36:12: INSTALL. Return value 3.'
...SharePoint\global\oserver.MSI ErrorCode: 1603(0x643).
A couple of posts seemed related:
http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=346
http://blogs.msdn.com/b/odabasi/archive/2012/12/28/failed-to-install-the-product-drive-name-global-oserver-msi-error-code-1603-0x643-error-when-istalling-sharepoint-2013.aspx
http://www.helpfuladm.in/sp2013-preview-install-error-microsoft-sharepoint-server-2013-preview-encountered-an-error-during-setup/
I have had a few virtual machines that built fine... one I’ve been using to test with works about 33% of the time and fails with the same error other times.
I have tweaked the RAM and the # of Virtual Procs and nothing seems to consistently fix it. Specifically I've disabled dynamic memory, set the RAM to 8GB and the number of procs to
4. I've also downloaded the SharePoint ISO from multiple sources (MSDN/TechNet/Trial) thinking the installer was possibly corrupt - same issue.
At this point I'm thinking it is either an issue with Hyper-V on Windows 8.1 + SharePoint or else something specific to my hardware but it is terribly hard to troubleshoot an error that
is intermittent. Any thoughts or suggestions would be appreciated!

@Trevor, I'm new to MSI debugging... now that I have a verbose log, what should I be doing with it? :)
The area of the error appears to be:
Action ended 13:13:06: Set_ArpWrite. Return value 1.
MSI (s) (2C:E0) [13:13:06:201]: Creating MSIHANDLE (15358) of type 790542 for thread 4064
MSI (s) (2C:BC) [13:13:06:201]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIE1F4.tmp, Entrypoint: OcaArpWrite
MSI (s) (2C!44) [13:13:06:216]: Creating MSIHANDLE (15359) of type 790541 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Creating MSIHANDLE (15360) of type 790540 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Creating MSIHANDLE (15361) of type 790531 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Creating MSIHANDLE (15362) of type 790531 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Closing MSIHANDLE (15362) of type 790531 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Note: 1: 2259 2: 3: 4:
MSI (s) (2C!44) [13:13:06:216]: Creating MSIHANDLE (15363) of type 790531 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Closing MSIHANDLE (15363) of type 790531 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Closing MSIHANDLE (15361) of type 790531 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Closing MSIHANDLE (15360) of type 790540 for thread 3908
MSI (s) (2C!44) [13:13:06:216]: Note: 1: 2205 2: 3: Error
MSI (s) (2C!44) [13:13:06:216]: Note: 1: 2228 2: 3: Error 4: SELECT `Error`,`Message` FROM `Error`
MSI (s) (2C!44) [13:13:06:216]: Closing MSIHANDLE (15359) of type 790541 for thread 3908
Action start 13:13:06: ArpWrite.
MSI (s) (2C:BC) [13:13:06:216]: Closing MSIHANDLE (15358) of type 790542 for thread 4064
CustomAction ArpWrite returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 13:13:06: ArpWrite. Return value 3.
Action ended 13:13:06: INSTALL. Return value 3.
Any thoughts on what else I should look for in the MSI Log?

Showing search service application status error in SharePoint 2013

Hi All,
I'm unable to configure search service application in SharePoint 2013.When I go to CA > manage services , it is showing below issue.
On the place of started or stopped it shows 'error'. I'm using admin credentials here.
Then, when click on search service application, it shows details screen as follows
Thank you

HI,I would recommend to re-create the service application.please check the below links that gives you the solution of the issue.
http://expertsharepoint.blogspot.de/2014/07/the-search-service-is-not-able-to_19.html
http://expertsharepoint.blogspot.de/2014/07/the-search-service-is-not-able-to.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Error in Sharepoint 2013.

Hi Friend,
I have upgraded sharepoint 2010 application into sharepoint 2013. i am getting the below error message when i excuted the SP2013 application.
Sorry, something went wrong
Failed to get value of the "Request Type" column from the "Managed Metadata" field type control. See details in log. Exception message: Invalid field name. {00000000-0000-0000-0000-000000000000}
/apps/etms/Lists/Requests.
so kindly advise how to resolve this issue.
One more question, any limitation to upgrade SP2013 from SP2010 application. kindly advise.

Hiya,
I'd guess on the following. One of your content types are referencing an managed field type. This reference is set by ID and not name. When you move the solution to a new server, the ID's of the managed metadata might change, if the managed metadata is not
moved with ID's. This will break your references and might lead to the error you are seeing.
Something along the lines of this:
http://blog.kuppens-switsers.net/sharepoint/migrate-managed-metadata-between-farms/

Workflow Suspended error in sharepoint 2013

Hi,
I have created one list and attached one workflow to send notification mail when item is creatd.
The problem is while i created the item ,notification mail triggers.But the when other user creates item,the workflow get suspended and showing the following error.
Waiting for your quick response.
Thank you

Dear Aditi Das,
I tested below steps on library and worked.
Added the System account to Full control Permission on bin folder and GAC.(workflow "app" would need to have higher or elevated permissions)
Confirmed that this account have full control on the Web application.
Checked Site actions > Site Settings > Site features > Workflows can use app permissions > Activate.
Performed an IISReset.
Account was showing as SharePointApp now in place of System account.
SharePoint 2013 workflow are working as expected now.
Sachin Shetty| MCP|MCT|MCTS|MCITP| http://sachinshetty.design.officelive.com Please remember to mark the replies as answers and Vote as helpful if they help and unmark them if they provide no help.Thank you in advance.

Listform webpart is throwing error in SharePoint 2013

Hi,
I have added a listform webpart(newform of a SPlist) to a page. But,the page is throwing "Object Reference Not Found" error. If i replace the listform webpart with custom list form, i am not getting any error.
Please let me know if i need to make any change in the SharePoint 2013 site. Any help is highly appreciated.
Thanks

Hi,
How did you add a listform webpart to a page? Do you mind to breaking this down into steps so we can try to reproduce the error?
James
Please mark as Answered if it helped you
James Tsai | SharePoint Consultant | MCPD,MCTS |
www.jamestsai.net

Could not load file or assembly AjaxToolkit error in SharePoint 2013 Visual Webpart

I wanted to use ajax controls in visual webpart for sharepoint 2013 so i followed steps.
1-I cut this snippet (see below) from <head></head> Section and paste in <body></body> Section for my master page since it's a requirement for SharePoint 2013 ajax functionality.
Snippet:




2-downloaded a latest ajax tool kit and then added ajax toolkit dll from the toolkit library in my solution's bin-->debug folder
now add ajax entries in web.config in these sections
in <SafeControls>
<SafeControl Assembly="ajaxcontroltoolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e, processorArchitecture=MSIL" Namespace="AjaxControlToolkit" TypeName="*" />
in <assemblies>
<add assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
in <controls>
<add tagPrefix="ajax" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
finally registered ajax in visual web part as
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajaxtoolkit" %>
added following calender control
<asp:TextBox MaxLength="10" ID="txtToDate" runat="server" CssClass="FormTextBoxSmall"></asp:TextBox>
<asp:ImageButton ID="calReqDateTo" runat="server" ImageUrl="" />
<ajaxtoolkit:CalendarExtender id="CalendarExtender2" runat="server" targetcontrolid="txtToDate"
format="dd/MM/yyyy" popupbuttonid="calReqDateTo" />
reset iis and deployed my solution but when i deployed it throws error
"could not load file or assembly AjaxToolkit,Version=4.1.7.1213 "
please help

Hi,
In this below thread they have discussed and resolved your issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/60fa19fe-86a0-446b-b61f-11a82fe4287f/how-to-implement-ajax-toolkit-for-sharepoint2013?forum=sharepointdevelopment&prof=required
Please let us know if you need further details
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Visual Webpart Sandboxed Solution Error in SharePoint 2013

I am trying to insert a visual web part using sand boxed solution on a page.But when i insert a web part on page i get the following error.
"Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: The type is not registered as safe".
Please suggest how do i get rid off this error as I've to use sand boxed solutions not farm solution.

Hi ,
According to your description, my understanding is that you got an error when you used visual web part solution in SharePoint 2013.
Whether you have enabled the web part solution in Site Collection Administrator->Site Collection features.
Whether there were some non-authorized methods called in your code.
Here are some similar posts for you to take a look at:
http://blogs.msdn.com/b/vincent_runge/archive/2010/05/12/support-answers-on-sandboxed-solutions-in-sharepoint-2010.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8573ec4c-8fdb-40f5-b730-250174a08efb/sandbox-solutions-with-web-parts-upgrade-error?forum=sharepointdevelopmentprevious
http://sharepoint.stackexchange.com/questions/59679/sandbox-unhandled-exception-was-thrown-partial-trust-app-domain
http://scrum.codeplex.com/workitem/11222
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error - Connecting SharePoint 2013 with OWA

We are configuring OWA on SharePoint 2013.
Installation and configuration of OWA is done are when the "https://<InternalName>/hosting/discovery" is typed in browser, XML is being displayed on the Web Front end server.
There is an error on running the below command on the web front end server:
New-SPWOPIBinding -"Servername" ,
Checking the event viewer , there is an error :
An operation failed because the following certificate has validation errors with event id 8311
I am struck here, should i re install the certificate?
What could be the problem here?
Thanks in advance

Hi Balaji Pastapure,
do you have:
1. Your ADRMS server installed on the same machine as SharePoint?
2. SCP registered in AD domain?
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Issue with @mention urls in newsfeed - SharePoint 2013

I have configured mysites in SharePoint 2013 with following cnfigurations,
Server name : Server1
Alternate Access Mappings for Portal (on port 80): Server1 (default), Intra.domain.com
Alternate Access Mappings for MySites (on port 1234): Server1:1234, mysite.domain.com . I created these by extending web applications on port 80 with host header.
When accessing Mysites using - mysite.domain.com
I am able access mysites and intranet portal without any issues, browse org chart, post comments etc..
Links to Newsfeed, Onedrive Pro, about me etc.. all are working fine.
links to Hashtags are working fine. E.g #SharePoint
But when i post with '@mention' links to these user profiles are taking me to 'Server1:1234' urls instead of 'mysite.domain.com' urls.
Did any one experience similar issue? I am not if it is a bug in SharePoint.
Any ideas to fix this issue?

Hi Srujank,
According to your description, my understanding is that the URL changed to Server:1234 when you posted with @mention in Newsfeed.
Did this issue occur with other users?
How did you configure the Alternate Access Mapping for the My Site web application?
I recommend to set the Server:1234 as the default zone URL of the My Site web application and set the mysite.domain.com as the other zone’s URL.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

"Sorry, we couldn't find your file. Is it possible it was moved, renamed or deleted?" Error with SharePoint 2013 and Office Web Apps

When I try to open any docx file from the SharePoint it opens on web via office web apps, and when I choose edit document > edit in Word , Microsoft word show me this error "Sorry, we couldn't find your file.
Is it possible it was moved, renamed or deleted?" followed by half a url to the end users document on onedrive.
I noted that this problem only happens with Docx files, with specific users and only when you try to open the Docx file from OneDrive folder ( SkyDrive ) which is hosted in the MySite.
Any Help?

Hi,
According to your post, my understanding is that you failed to open the Docx file from OneDrive folder ( SkyDrive ).
Since this problem only happens with Docx files, with specific users, I recommend to delete and recreate the personal site for the specific users.
More information:
Configure My Sites in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

SharePoint Workflow Services Communication Error in SharePoint 2013

I am developing a few workflows using SharePoint Designer 2013. Previously my workflows can be run without any WorkflowCommunication error but after Nintex Workflow is deployed and run in the same server, there were a few times the workflows that were created
using SharePoint Designer 2013 failed to run due to SharePoint WorkflowCommunication error. Below is the example of the error:
Microsoft.Workflow.Client.WorkflowCommunicationException: The request was aborted: The request was canceled. Client ActivityId : 3ef6779c-fb54-e0c5-7c03-e24d99e809f1. ---> System.Net.WebException: The request was aborted: The request was canceled. --->
System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Configuration.ConfigurationChannelFactory`1[Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract], cannot be used for
Currently, to make the workflow run again, we restart the SharePoint Workflow services again or restart the server again. Besides, the workflow can run normally after a few hours without any restart of SharePoint Workflow services or server restart. Is there
any advice on this?
wawa87

I am developing a few workflows using SharePoint Designer 2013. Previously my workflows can be run without any WorkflowCommunication error but after Nintex Workflow is deployed and run in the same server, there were a few times the workflows that were created
using SharePoint Designer 2013 failed to run due to SharePoint WorkflowCommunication error. Below is the example of the error:
Microsoft.Workflow.Client.WorkflowCommunicationException: The request was aborted: The request was canceled. Client ActivityId : 3ef6779c-fb54-e0c5-7c03-e24d99e809f1. ---> System.Net.WebException: The request was aborted: The request was canceled. --->
System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Configuration.ConfigurationChannelFactory`1[Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract], cannot be used for
Currently, to make the workflow run again, we restart the SharePoint Workflow services again or restart the server again. Besides, the workflow can run normally after a few hours without any restart of SharePoint Workflow services or server restart. Is there
any advice on this?
wawa87
Is there any explanation on this?
wawa87

Autodiscover URL error in SharePoint 2013

Similar Messages

Maybe you are looking for