Autoextend enabled in datafiles but not tablespace

Hi,
In my IDES ERP 6.0 EHP4 system, I have noticed that the tablespace PSAPSR3 is marked 'NO' in AUTOEXTEND colume in DBACockpit.
However, each datafile of this table space is autoexend enabled, the maxsize is 10GB and extend is 20MB per step.
I have no idea why the tablespace is marked as NOT AUTOEXTEND but datafiles are.
Please suggest.
Thanks a lot.
Regards,
Alex

Hi, this is my another account.
I have checked that the size and max. size of all datafiles of tablespace PSAPSR3 are same.
Tablespace name
Size(MB)
Free(MB)
Used(%)
Autoextend
Total size(MB)
PSAPSR3
150.000,00
9.863,06
93
NO
150.000,00
File name
File Id
Tablespace name
Size(MB)
#Blocks
Status
Rel. file number
Autoextensible
|D:\ORACLE\ECT\SAPDATA1\SR3_1\SR3.DATA1 |4      |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|4               |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_2\SR3.DATA2 |5      |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|5               |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_3\SR3.DATA3 |6      |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|6               |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_4\SR3.DATA4 |7      |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|7               |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_5\SR3.DATA5 |8      |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|8               |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_6\SR3.DATA6 |9      |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|9               |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_7\SR3.DATA7 |10     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|10            |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_8\SR3.DATA8 |11     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|11            |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_9\SR3.DATA9 |12     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|12            |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_10\SR3.DATA10|13     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|13          |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_11\SR3.DATA11|14     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|14          |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_12\SR3.DATA12|15     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|15          |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_13\SR3.DATA13|16     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|16          |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_14\SR3.DATA14|17     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|17          |YES
|D:\ORACLE\ECT\SAPDATA1\SR3_15\SR3.DATA15|33     |PSAPSR3        |10.000,00 |1.280.000 |AVAILABLE|33          |YES
Please suggest.
Regards,
Alex
Edited by: QiAlexLi on Aug 31, 2010 1:39 PM

Similar Messages

I can only backup the datafiles but not the control files and SPFiles

Hello, all,
I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
1. the ARCHIVELOG is on
2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
Accept the default of 31days
5. go to Schedul Backup
6. select customized from the backup Strategy drop-down menu. Select the Whole Database
7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
8. in the Setting page, select “Disk”
9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
10. just submit the job.
After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=268 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 11:20:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
What should I do? Any advice is highly appreciated!
Qian

the string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
I reset these values and tried to backup the whole database. The same error appeared. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=245 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 16:40:05
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
Any help is appreciated!
Qian
Message was edited by:
QianChen

My exchange is enabled for BTInfinity, but not ava...

Hi
My exhange (Oadby) is already enabled for BT Infinity - but not available on my line until Dec 31st.
A few months ago the checker said it would be available by 31st Sept !
I've looked at the reasons given here http://community.bt.com/t5/BT-Infinity/BT-Infinity-has-reached-my-area-but-the-line-checker-says-I-c...
How do I find out if I will eventually get connected (or not) ?
thanks

Toekneem beat me to it again....
In the thread below message #4 there is a picture of a typical Fibre cabinet sitting next to it's older little brother
http://community.bt.com/t5/BT-Infinity/How-can-I-find-my-cabinet-number-and-when-it-will-be-enabled/...
Edit there are a few varieties of fibre cabinets with some smaller, but the thing to look out for are cooling grills which as Toekneem mentioned if the cabinet is powered up you can easily hear the fans running.
And if so then your nearly set for Infinity and beyond!!!
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Fast writes enabled in BIOS but not in Windows 2000

WPCID and SiSoft Sandra report that fast writes is disabled despite being enabled in BIOS. When fast writes are enabled with NVMax, all games crash within 30 seconds.

Hi there:
Do you have Windows 8.1 Pro or Enterprise 64bit OS edition?
Please read this:
http://blogs.technet.com/b/canitpro/archive/2014/03/11/step-by-step-enabling-hyper-v-for-use-on-wind...
http://windows.microsoft.com/en-in/windows-8/hyper-v-run-virtual-machines
Additional:
http://www.howtogeek.com/196158/how-to-create-and-run-virtual-machines-with-hyper-v/
http://www.eightforums.com/tutorials/2493-hyper-v-how-use-windows-8-a.html
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Auto optimizer stats collection enabled, but not running and not showing up

I enabled auto optimizer stats collection days ago, but it never ran. DB version is 11gr2, OS is redhat 5. It shows enabled in dba_autotask_client, but not in autotask_task. Please help on this issue.
SQL> select client_name, status from dba_autotask_client;
CLIENT_NAME STATUS
auto optimizer stats collection ENABLED
auto space advisor DISABLED
sql tuning advisor ENABLED
SQL> select task_name, status, to_char(last_good_date, 'YYYY-MM-DD HH24:MI:SS') last_good_date, last_good_duration
from dba_autotask_task
where client_name = 'auto optimizer stats collection'; 2 3
no rows selected
SQL> select program_action, number_of_arguments, enabled
from dba_scheduler_programs
where owner = 'SYS'
and program_name = 'GATHER_STATS_PROG'; 2 3 4
PROGRAM_ACTION NUMBER_OF_ARGUMENTS ENABL
dbms_stats.gather_database_stats_job_proc 0 TRUE
SQL> select w.window_name, c.autotask_status, c.optimizer_stats, w.repeat_interval, w.enabled
-- , w.duration, w.last_start_date, w.next_start_date
2 from dba_autotask_window_clients c , dba_scheduler_windows w
3 4 where c.window_name = w.window_name
5 order by last_start_date desc;
WINDOW_NAME AUTOTASK OPTIMIZE REPEAT_INTERVAL ENABL
MONDAY_WINDOW ENABLED ENABLED freq=daily;byday=MON;byhour=22;byminute=0; bysecond=0 TRUE
SUNDAY_WINDOW ENABLED ENABLED freq=daily;byday=SUN;byhour=6;byminute=0; bysecond=0 TRUE
SATURDAY_WINDOW ENABLED ENABLED freq=daily;byday=SAT;byhour=6;byminute=0; bysecond=0 TRUE
FRIDAY_WINDOW ENABLED ENABLED freq=daily;byday=FRI;byhour=22;byminute=0; bysecond=0 TRUE
THURSDAY_WINDOW ENABLED ENABLED freq=daily;byday=THU;byhour=22;byminute=0; bysecond=0 TRUE
WEDNESDAY_WINDOW ENABLED ENABLED freq=daily;byday=WED;byhour=22;byminute=0; bysecond=0 TRUE
TUESDAY_WINDOW ENABLED ENABLED freq=daily;byday=TUE;byhour=22;byminute=0; bysecond=0 TRUE
7 rows selected.
SQL>

SQL> select max(last_analyzed) from all_tables where owner='ARAD';
MAX(LAST_
26-SEP-12

Flash in Safari but not in Firefox or vice versa?

Can I have Adobe Flash enabled on Safari, but not on Firefox?
I'd like regular, usable browser and one very safe, minimal browser.

HI,
Not sure if that is possible but an alternative is to use ClickToFlash available here.
Free, easy to install, compatible with Safari 5 + and Snow Leopard v10.6.4
http://clicktoflash.com/
When you visit a site where Flash content is streamed, just control or right click to start Flash.
Carolyn

Lost of datafile to 2 tablespaces, no rman but expdp image

Hello,
We lost 2 datafiles to 2 tablespaces in our non-production database. We can not open the database because of the missing 2 datafiles on the same mountpoint. The database is mounted. How to drop these 2 tablespaces and datafiles so the database can be open? We do not have rman but do have expdp files as backup. Thank you.

Offline drop the datafiles,drop the tablespaces,recreate them,import the data.
ALTER DATABASE DATAFILE '<full_path_file_name>' OFFLINE DROP;
ALTER DATABASE OPEN;
DROP TABLESPACE <tablespace_name> INCLUDING CONTENTS;
CREATE TABLESPACE <tablespace_name> DATAFILE
'<datafile_full_path_name'> SIZE <required_size>;
impdp .....
Werner

Add new datafile to logical standby database but not in primary

Hi,
Is it ok to add a new datafile to the SYSAUX tablespace on the logical standby database but not on primary? We are running out of disk space on the partition where SYSAUX01.dbf resides so we want to add a new SYSAUX02.dbf in another partition which has space. but this will only be on the logical standby not on primary, there is still lots of space in primary. standby_file_management is MANUAL and this is LOGICAL STANDBY not PHYSICAL.
Is this possible or where there be any issues?
Thanks.

Logical Standby can differ from Primary, it can have extra tablespaces, datafiles, tables, indexes, users ...
HTH
Enrique

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable it to save mp3 files on my computer?

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable Firefox to save mp3 files on my computer?

Go to Options>Applications tab > search MPEG Layer 3 audio(audio/mpeg) > use "Save File" option on drop down menu.

Back to my mac - iCloud enabled, but not working

Last year I made very regular use of Back to My Mac. Time and again I had no problems using my Mac Book Pro and connecting to my Mac Pro back home - did this from all over the place.
Then last month, my DSL router died and I had to upgrade.   The Netgear switch I had used stopped letting Back to My Mac work - turned out there was a glitch and I was one of the few who had a working unit, but not that it had tanked I could not get it back. All systems would get an error when trying to enable Back To My Mac instructing me to review my settings, enable UPnp, etc...
So now I have a new Netgear R6300 and my MiniMac, Mac Pro and Mac Book Pro all can have Back to My Mac checked without an error showing up. Can uncheck and re-check and the spinning wheel does it's thing and the box shows properly with no error.   Great - but apparently not really.   All these systems are in the same network, so of course they can see each other from within my network - no need for Back To My Mac at all.
But as soon as I try and connect from outside my network I can't.   The Netgear R6300 provides a guest wireless network (that can't see or share the home network), so I can grab another IP address and effectively be outside my home with the Mac Book Pro.   Again, no error when I look at iCloud - and I can uncheck and recheck the Back to My Mac box and the handshaking necessary seems to be fine - but I do not get my home systems appearing in the Finder Shared list as they once did.
The systems in my house can't see the Mac Book Pro either.
As I have a group of static IP addresses from Centurylink I can use a fireware adapter and directly connect a network cable to the M1000 DSL modem - and directly pull one of my other IP addresses for the Mac Book Pro and have it completely out from under the Netgear R6300.   But the situation is the same - the Mac Pro and Mini Mac both appear to be configuered for Back to My Mac (can check, un-check and recheck without an error), but they can't see the Mac Book Pro.   Likewise the Mac Book Pro appears properly set for Back To My Mac - but it can't see either the Mac Pro or the Mini Mac.
It makes no difference whether I enable the Centurylink M1000 DSL firewall or have it disabled.   UPnP is activated on the Netgear R6300, and if I turn it off I get an error when trying to set up Back to My Mac with any system funneling through the R6300 that the connection can't be made and I should check things like UPnP.    So when it is enabled there certainly seems to be at least some sort of semi proper handshaking going on.
For diagnostic purposes only, I have stretched a really long Cat 6 cable accross the room and plugged the Mac Pro directly into the M1000 DSL too - pulling yet another static IP from my assigned block. Now the Mac Book Pro and the Mac Pro can see each other via Back to My Mac - but neither can see the Mini Mac, and it of coruse can't see either of them.
I am not wedded to Netgear, but I have had lousy luck with Linksys and Asus - the Asus. The Mini Mac is a server (web and email) and Asus would not properly route mail to the Mini Mac and their Tech support was both difficult to reach and unable to explain why, just go try another.   The Linksis EA6500 was dead out of the box, and again Tech support suggested to just go get another one.   Asus was truly horrible to work with, but I would try another Linksis - but I have had flakey history with Belkin and Linksis which is why I went to Netgear.
So I know that the Centurylink M1000 does not appear to be the issue as devices connected directly to it can enjoy Back to My Mac.   I know that the Netgear R6300 appears to be working but clearly there must be something wrong somewhere.
I don't seem to be caught in a double NAT issue, and I don't have extreme firewall issues in play.   Much as I would like and intend to put stiffer rules in place, right now I just want to get thigns working.
Clearly I am missing something. Suggestions - even for a different router know to be working in a small but robust network with cable and wireless would be most welcome.   All three systems are running OS X 10.8.3 - the Mini Mac also running server. Both the Netgear R3600 and the Centurylink M1000 have the latest firmware.
Thanks in advance for your help.

Is the Extreme in bridge or router mode.. most people are finding it has to be in router mode to work although I don't think that is specific in the instructions..
You should not need to access the extreme to get into the Mac though.. do you have a hard disk on the AE you are trying to access??

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightr

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightroom.

Hi,
could you please give us some info on what kind of network you have?
Can other application communicate with the web?
Thanks,
Ignacio

I am having trouble running videos through Safari but not Google Chrome. All I get is a black screen. I have the latest adobe flash update and have enabled plug ins. any suggestions?

I am having trouble running videos through Safari but not Google Chrome. All I get is a black screen. I have the latest adobe flash update and have enabled plug ins. any suggestions?

Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Not empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Now try a video.

Jave installed but not enabled

Sorry, I'm sure this is a basic question, that I should be able to figure out myself, but hopefully someone will be able to assist me. I am trying to enable Java so that I can use/access programs that uses the Sun Java applet. I've gone to my control panel and see that it's on my computer. I've tried to re-download/intall it but it says I already have it even after removing it. I've done the "test" and it says that it's intstalled but not enabled. I've gone to Tools--internet options--Security--Custom-- there only seems to be a java option under scripting, but I've seen recommendations to make sure it's enabled in another section, but that isn't an option. I do not see the Java coffee cup logo in my control panel either and I can not access the Sun Java Console under tools either. It's there, but nothing happens when I click on it. Sorry so long, just trying to give some background into what I've already tried. Thanks for any help

I also have an hs_err file on my desktop that seems to be related.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x74D243F
Function=Java_sun_awt_windows_WColor_getDefaultColor+0x2E1D
Library=C:\Program Files\Java\j2re1.4.2_03\bin\awt.dll
Current Java thread:
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00419000      C:\Program Files\Internet Explorer\iexplore.exe
0x7C900000 - 0x7C9B0000      C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000      C:\WINDOWS\system32\kernel32.dll
0x77C10000 - 0x77C68000      C:\WINDOWS\system32\msvcrt.dll
0x77D40000 - 0x77DD0000      C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F56000      C:\WINDOWS\system32\GDI32.dll
0x77F60000 - 0x77FD6000      C:\WINDOWS\system32\SHLWAPI.dll
0x77DD0000 - 0x77E6B000      C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000      C:\WINDOWS\system32\RPCRT4.dll
0x77760000 - 0x778CC000      C:\WINDOWS\system32\SHDOCVW.dll
0x77A80000 - 0x77B14000      C:\WINDOWS\system32\CRYPT32.dll
0x77B20000 - 0x77B32000      C:\WINDOWS\system32\MSASN1.dll
0x754D0000 - 0x75550000      C:\WINDOWS\system32\CRYPTUI.dll
0x76C30000 - 0x76C5E000      C:\WINDOWS\system32\WINTRUST.dll
0x76C90000 - 0x76CB8000      C:\WINDOWS\system32\IMAGEHLP.dll
0x77120000 - 0x771AC000      C:\WINDOWS\system32\OLEAUT32.dll
0x774E0000 - 0x7761C000      C:\WINDOWS\system32\ole32.dll
0x5B860000 - 0x5B8B4000      C:\WINDOWS\system32\NETAPI32.dll
0x771B0000 - 0x77256000      C:\WINDOWS\system32\WININET.dll
0x76F60000 - 0x76F8C000      C:\WINDOWS\system32\WLDAP32.dll
0x77C00000 - 0x77C08000      C:\WINDOWS\system32\VERSION.dll
0x773D0000 - 0x774D2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x7C9C0000 - 0x7D1D4000      C:\WINDOWS\system32\SHELL32.dll
0x5D090000 - 0x5D127000      C:\WINDOWS\system32\comctl32.dll
0x5AD70000 - 0x5ADA8000      C:\WINDOWS\system32\uxtheme.dll
0x75F80000 - 0x7607C000      C:\WINDOWS\system32\BROWSEUI.dll
0x20000000 - 0x20012000      C:\WINDOWS\system32\browselc.dll
0x77B40000 - 0x77B62000      C:\WINDOWS\system32\appHelp.dll
0x76FD0000 - 0x7704F000      C:\WINDOWS\system32\CLBCATQ.DLL
0x77050000 - 0x77115000      C:\WINDOWS\system32\COMRes.dll
0x77260000 - 0x772FE000      C:\WINDOWS\system32\urlmon.dll
0x77FE0000 - 0x77FF1000      C:\WINDOWS\system32\Secur32.dll
0x77A20000 - 0x77A74000      C:\WINDOWS\System32\cscui.dll
0x76600000 - 0x7661D000      C:\WINDOWS\System32\CSCDLL.dll
0x77920000 - 0x77A13000      C:\WINDOWS\system32\SETUPAPI.dll
0x10000000 - 0x1001D000      c:\progra~1\mcafee.com\vso\mcvsshl.dll
0x014C0000 - 0x014C4000      c:\progra~1\mcafee.com\vso\ShlRes.dll
0x01500000 - 0x01588000      C:\WINDOWS\system32\shdoclc.dll
0x01790000 - 0x0179C000      C:\Program Files\Adobe\Acrobat 6.0\Reader\ActiveX\AcroIEHelper.dll
0x017C0000 - 0x017DF000      C:\WINDOWS\system32\dla\tfswshx.dll
0x017E0000 - 0x017EF000      C:\WINDOWS\system32\tfswapi.dll
0x017F0000 - 0x0182B000      C:\WINDOWS\system32\dla\tfswcres.dll
0x75E90000 - 0x75F40000      C:\WINDOWS\system32\SXS.DLL
0x01890000 - 0x01B55000      C:\WINDOWS\system32\xpsp2res.dll
0x75CF0000 - 0x75D81000      C:\WINDOWS\system32\mlang.dll
0x71AD0000 - 0x71AD9000      C:\WINDOWS\system32\wsock32.dll
0x71AB0000 - 0x71AC7000      C:\WINDOWS\system32\WS2_32.dll
0x71AA0000 - 0x71AA8000      C:\WINDOWS\system32\WS2HELP.dll
0x71A50000 - 0x71A8F000      C:\WINDOWS\system32\mswsock.dll
0x662B0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
0x71A90000 - 0x71A98000      C:\WINDOWS\System32\wshtcpip.dll
0x76EE0000 - 0x76F1C000      C:\WINDOWS\system32\RASAPI32.DLL
0x76E90000 - 0x76EA2000      C:\WINDOWS\system32\rasman.dll
0x76EB0000 - 0x76EDF000      C:\WINDOWS\system32\TAPI32.dll
0x76E80000 - 0x76E8E000      C:\WINDOWS\system32\rtutils.dll
0x76B40000 - 0x76B6D000      C:\WINDOWS\system32\WINMM.dll
0x77C70000 - 0x77C93000      C:\WINDOWS\system32\msv1_0.dll
0x76D60000 - 0x76D79000      C:\WINDOWS\system32\iphlpapi.dll
0x722B0000 - 0x722B5000      C:\WINDOWS\system32\sensapi.dll
0x769C0000 - 0x76A73000      C:\WINDOWS\system32\USERENV.dll
0x7D1E0000 - 0x7D492000      C:\WINDOWS\system32\msi.dll
0x02020000 - 0x0203C000      c:\progra~1\mcafee.com\vso\McVSSkt.dll
0x76F20000 - 0x76F47000      C:\WINDOWS\system32\DNSAPI.dll
0x76FC0000 - 0x76FC6000      C:\WINDOWS\system32\rasadhlp.dll
0x76980000 - 0x76988000      C:\WINDOWS\system32\LINKINFO.dll
0x76990000 - 0x769B5000      C:\WINDOWS\system32\ntshrui.dll
0x76B20000 - 0x76B31000      C:\WINDOWS\system32\ATL.DLL
0x7D4A0000 - 0x7D783000      C:\WINDOWS\system32\mshtml.dll
0x746C0000 - 0x746E7000      C:\WINDOWS\system32\msls31.dll
0x746F0000 - 0x7471A000      C:\WINDOWS\system32\msimtf.dll
0x74720000 - 0x7476B000      C:\WINDOWS\system32\MSCTF.dll
0x76390000 - 0x763AD000      C:\WINDOWS\system32\IMM32.DLL
0x75C50000 - 0x75CBE000      C:\WINDOWS\system32\jscript.dll
0x74C80000 - 0x74CAC000      C:\WINDOWS\system32\OLEACC.DLL
0x76080000 - 0x760E5000      C:\WINDOWS\system32\MSVCP60.dll
0x72D20000 - 0x72D29000      C:\WINDOWS\system32\wdmaud.drv
0x72D10000 - 0x72D18000      C:\WINDOWS\system32\msacm32.drv
0x77BE0000 - 0x77BF5000      C:\WINDOWS\system32\MSACM32.dll
0x77BD0000 - 0x77BD7000      C:\WINDOWS\system32\midimap.dll
0x66E50000 - 0x66E8F000      C:\WINDOWS\system32\iepeers.dll
0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
0x76200000 - 0x76271000      C:\WINDOWS\system32\mshtmled.dll
0x73300000 - 0x73367000      C:\WINDOWS\system32\vbscript.dll
0x73DD0000 - 0x73ECE000      C:\WINDOWS\system32\MFC42.DLL
0x03930000 - 0x03AD7000      C:\WINDOWS\system32\macromed\flash\Flash.ocx
0x763B0000 - 0x763F9000      C:\WINDOWS\system32\comdlg32.dll
0x6D430000 - 0x6D43A000      C:\WINDOWS\system32\ddrawex.dll
0x73760000 - 0x737A9000      C:\WINDOWS\system32\DDRAW.dll
0x73BC0000 - 0x73BC6000      C:\WINDOWS\system32\DCIMAN32.dll
0x79170000 - 0x79196000      C:\WINDOWS\system32\mscoree.dll
0x79410000 - 0x79425000      C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\mscorie.dll
0x7C340000 - 0x7C396000      C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\MSVCR71.dll
0x79480000 - 0x79499000      C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\mscorld.dll
0x71D40000 - 0x71D5C000      C:\WINDOWS\system32\actxprxy.dll
0x6CC60000 - 0x6CC6B000      C:\WINDOWS\system32\dispex.dll
0x66880000 - 0x6688C000      C:\WINDOWS\system32\ImgUtil.dll
0x5E310000 - 0x5E31C000      C:\WINDOWS\system32\pngfilt.dll
0x6D440000 - 0x6D450000      C:\Program Files\Java\j2re1.4.2_03\bin\npjpi142_03.dll
0x5EDD0000 - 0x5EDE7000      C:\WINDOWS\system32\OLEPRO32.DLL
0x6D310000 - 0x6D327000      C:\Program Files\Java\j2re1.4.2_03\bin\jpiexp32.dll
0x76FB0000 - 0x76FB8000      C:\WINDOWS\System32\winrnr.dll
0x6D380000 - 0x6D398000      C:\Program Files\Java\j2re1.4.2_03\bin\jpishare.dll
0x08000000 - 0x08138000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\client\jvm.dll
0x029B0000 - 0x029B7000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\hpi.dll
0x033F0000 - 0x033FE000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\verify.dll
0x03400000 - 0x03419000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\java.dll
0x03420000 - 0x0342D000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\zip.dll
0x07460000 - 0x0756F000      C:\Program Files\Java\j2re1.4.2_03\bin\awt.dll
0x07670000 - 0x076C0000      C:\Program Files\Java\j2re1.4.2_03\bin\fontmanager.dll
0x73940000 - 0x73A10000      C:\WINDOWS\system32\D3DIM700.DLL
0x6D2F0000 - 0x6D304000      C:\Program Files\Java\j2re1.4.2_03\bin\jpicom32.dll
0x03500000 - 0x0350F000      C:\Program Files\Java\j2re1.4.2_03\bin\net.dll
0x04360000 - 0x04382000      C:\Program Files\Java\j2re1.4.2_03\bin\dcpr.dll
0x5FF20000 - 0x5FF46000      C:\WINDOWS\system32\MSRATING.dll
0x5FF50000 - 0x5FF61000      C:\WINDOWS\system32\msratelc.dll
0x59A60000 - 0x59B01000      C:\WINDOWS\system32\DBGHELP.dll
0x76BF0000 - 0x76BFB000      C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 283K [0x10020000, 0x100c0000, 0x10780000)
eden space 512K, 49% used [0x10020000, 0x1005f758, 0x100a0000)
from space 64K, 45% used [0x100b0000, 0x100b7548, 0x100c0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 1408K, used 504K [0x10780000, 0x108e0000, 0x16020000)
the space 1408K, 35% used [0x10780000, 0x107fe098, 0x107fe200, 0x108e0000)
compacting perm gen total 4608K, used 4490K [0x16020000, 0x164a0000, 0x1a020000)
the space 4608K, 97% used [0x16020000, 0x16482860, 0x16482a00, 0x164a0000)
Local Time = Fri Jan 07 21:17:46 2005
Elapsed Time = 658
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_03-b02 mixed mode)
#

HT3775 I am using OS X Mountain Lion and I have this .avi file but not able to read. What is missing in my setup and what other file do I need to download to enable me to read? I can read mp4 files though.

I am using OS X Mountain Lion and I have this .avi file but not able to read. What is missing in my setup and what other file do I need to download to enable me to read? I can read mp4 files though.

Here is a link: https://itunes.apple.com/en/app/mplayerx/id421131143?mt=12
I agree that VLC is also a good choice but MPlayerX is more user friendly.

Autoextend enabled in datafiles but not tablespace

Similar Messages

Maybe you are looking for