Autofill / autocomplete not functioning properly with mouse

auto-complete or auto-fill display items to choose from as typing in on Google search or other fill boxes, however, using the mouse the click on an item takes me back to only what I had typed. Using the down arrow and enter key option seems to work.

Do you have the AVG Site Advisor extension installed? <br />
If so, disable it until AVG fixes it.
If not, see this to troubleshoot and find out which extension is causing that. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Similar Messages

  • HP laserjet M1120n MFP printer not functioning properly with Lion

    After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
    All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
    The printer is about 4yrs old.
    Thank you

    Your printer should be supported in Lion. Check to make sure you have the latest drivers installed. Make sure the driver for it is selected in the printer list.
    You might try deleting the printer and reading it once the latest driver and software is installed.

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • Extension may not function properly...

    My co-worker has been having some issues with her InDesign crashing latley. I opened up her Extensions manager just to see if I could find anything abnormal, and found alot of the extensions for InDesign have little yellow triangle warnings next to them. When I hover the mouse above it, it says "Extension may not function properly because it does not meet the dependency condition. I don't know what this means, or what should be done to resolve the issue.
    I checked my extensions manager on my computer at work, and i don't have any of these warnings on my InDesign extensions. So, I'm thinking this might be the cause of her InDesign crashing, but not sure.
    I clicked on the checkmark of one of her extensions, Assignment UI, to disable it, but not sure if I should do the same with the rest of them. After I disabled it, I can't see how to re-enable it. I try to click back on the box to enable it, but it doesn't do anything.
    She was just upgraded to OSX 9 Maverick today, but prior to that was using OSX 10.7.xx (Whatever the latest version was). I am currently using OSX 10.8.5, but wil be upgrading to Maverick soon as well.
    We are both using Mac 2.66 GHz Quad-Core Intel Macs with 16 GB memory. Both are using CS6, with the latest updates for InDesign applied.
    If anyone has any ideas on what to do with her extensions that have warnings it would be appreciated.
    Steve

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • Satellite P300D-110 integrated webcam is not functioning properly.

    Hello everyone,
    as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
    Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
    *How did this happen?*
    You tell me. This is how it went;
    * Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
    * Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
    To give a quick summary of the thread;
    * Using Camera Assistance Software provided by Toshiba I can take pictures.
    * Using Camera Assistance Software provided by Toshiba I can record sound.
    * Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
    * I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
    * I have downloaded and isntalled the latest drivers from the Toshiba website.
    * My laptop is about a week old.
    I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
    And if possible WITHOUT having to reinstall Windows Vista Home Premium.
    I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
    Sincerely,
    a sad customer.

    Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
    Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
    Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

  • HP computer will not work properly with an HP printer

    I have the following two items that I am trying to use together:
     - HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
     - HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
    When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up.  At this point, the system is unresponsive with respect to Adobe or the printer.
    I suspect that it is waiting for the input from the dialog box that never showed up.  I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
    I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer.  (I did not realize that a 9 month old printer was considered "old").  I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
    In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer.  (The printing function seems to work, just very slowly).
    Has anyone else heard of this?  Is there a resolution?

    Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
    I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
    I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores.  Hmmm....
    I feel like I am getting the run-around from HP.
    I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
    If anyone has any ideas or suggestions, I would be most happy to hear them.
    Thank you.

  • The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

    The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

    OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
    1. Powered off my MacBook and removed everything connected except for the power chord.
    2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
    3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
    Just added another couple of years usage with my aging mac :-)

  • Why do QTVR interactive images do not function properly or at all?

    QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
    http://www.edfruinphotography.com/MILLCITY_2.html

    I have Safari 5.1.7. I am using Mac Snow Leopard.
    That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
    You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General.

  • Why are my firefox icons and tabs not functioning properly?

    My firefox is not functioning properly since Monday. I have tried uninstalling and installing firefox but the problem is still there when I open it. Please help.

    Unfortunately, the most likely explanation is an incompatibility with your graphics card/chipset driver software. One of the effects of Safe Mode is to disable Firefox from using hardware acceleration. To turn that feature off in normal mode as well:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    This takes effect the next time you exit Firefox and start it up again. Any difference?

  • Cropping tool does not function properly in Photoshop CS3

    Cropping tool does not function properly in Photoshop CS3. Always crops to .004" x .004". Tried reinstall with no luck. Any fixes out there?

    Reset the tool by right-clicking on the crop tool drop-down/fly-out menu in the top options bar (big crop tool icon above the tools panel, when the crop tool is selected). Be sure to check there aren't values in the crop tool by hitting the clear button in the options bar.

  • TS1702 I am using iPad 3, today I upgraded it to iOS 6 however after updating a particular application is not functioning properly. it's Candy Shoot, need help in playing that game

    I am currently using iPad 3, and upgraded it to ios6 today. However after updating the software e a particular game Candy Shoot is not functioning properly. Please suggest how to get it solved

    thanks, but can you tell me how do I get in touch with the app development team?

  • HCPL0631 is not functioning properly please help!!

    To adminitrator,
    I am trying to use the HCPL0631 optocoupler for my simulation. However, this optocoupler will not function properly and will not give me a good result.
    I have attached the circuit diagram in the attachment, please let me know what is wrong with my circuit causing the components to fail.
    thank you for your kind attention
    Message Edited by justinycc on 04-11-2009 06:40 AM
    Message Edited by justinycc on 04-11-2009 06:41 AM
    Solved!
    Go to Solution.
    Attachments:
    circuit1.PNG ‏69 KB

    Actually, never mind about that, the model for the HCPL0631 isn't very good. It doesn't actual have a open collector output. It also has a built in VCC of 5V, so the power supply that you are attaching isn't really being used. Your problem is grounding. Multisim constructs mesh current and node voltage equations for simulation and can't do it accurately if you don't specify the ground for your circuit.
    Try adding a ground to the GND terminal of the optoisolator. You should also have a ground attached to the cathode of the optoisolator or neutral wire of the function generator. The GROUND component is in the Master Database in the Sources group and in the POWER_SOURCES family.
    Yi
    Software Developer
    National Instruments - Electronics Workbench Group

  • In my newly purchased MacBook Air, Dropbox does not function properly. It asks for Mac OS Password for my computer which I do not have.

    In my newly purchased MacBook Air, Dropbox does not function properly (it shows MS Word, Excell and Power Point docs but not pictures). It asks for Mac OS Password for my computer which I do not have. How should I get this password ?

    If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
    Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

  • Remote not working properly with Apple TV...sporadic fuctioning

    Hello,
    I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
    I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
    Please let me know if any of you have ever experienced this problem and what your solution was, if any!
    I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
    Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
    HELP PLEASE!
    Thank you,
    Travis

    The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
    Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

Maybe you are looking for