Autofill Shipping when Logged In

Hi all,
Trying to set up a secure zone so that when someone signs up, they get free shipping, and they don't need to keep on filling out their shipping details.
I was thinking you'd just put in { module_FirstName} etc in the form value so that when they're logged in it'd display their details, but you can't do that for their address and other details as far as I can tell?
Any help would be wonderful.
Cheers,
Mitch.

Hi,
Open Control Panel -> Clock, Language and Region
-> Regional and Language, in Keyboards and Languages
tab, change the display language. In Formats tab, set
Formats as English. Then restart the server to apply the changes.
If this problem was happened after some changes, you may restart the server, press F8 at the indicated time and select "Last Known Good Configuration", check to see if it will be helpful.
If the problem still exits, is there any changes before? What is the system version and language?
Best Regards,           
Eve Wang            

Similar Messages

  • When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
    Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

  • I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

    I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
    Here is what the etrecheck results are:
    Problem description:
    slow at start up, screen is distorted while logging in, it is fine after
    EtreCheck version: 2.1.8 (121)
    Report generated April 5, 2015 at 9:42:01 AM PDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 297
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:7:0
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
        [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
    Startup Items: ℹ️
        HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.ucupdate.plist
        [failed]    com.apple.watchdogd.plist [Click for details]
    Launch Agents: ℹ️
        [not loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
        [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
        [not loaded]    com.logmein.logmeingui.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
    Launch Daemons: ℹ️
        [not loaded]    com.adobe.fpsaud.plist [Click for support]
        [not loaded]    com.google.keystone.daemon.plist [Click for support]
        [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
        [not loaded]    com.logmein.logmeinserver.plist [Click for support]
        [not loaded]    com.logmein.raupdate.plist [Click for support]
        [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.ARM.[...].plist [Click for support]
        [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Android File Transfer Agent    Application  (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
        HP Product Research    Application  (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
        HPEventHandler    Application  (/Library/Printers/hp/hpio/HPEventHandler.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        LogMeInSafari64: Version: 1.0.660 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeIn: Version: 1.0.660 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeInSafari32: Version: 1.0.660 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 10.0.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             7%    ocspd
             4%    WindowServer
             1%    kextd
             0%    ps
             0%    securityd
    Top Processes by Memory: ℹ️
        137 MB    Microsoft Word
        120 MB    Safari
        86 MB    ocspd
        82 MB    CalendarAgent
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        310 MB    Free RAM
        1.89 GB    Active RAM
        1.55 GB    Inactive RAM
        544 MB    Wired RAM
        1.13 GB    Page-ins
        8 KB    Page-outs
    Diagnostics Information: ℹ️
        Apr 5, 2015, 09:32:47 AM    Self test - passed
        Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
        Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
        Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • HT1338 i currently have a macbook 2.1 and want to update. what can it support? I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account.

    i currently have a macbook 2.1xersion 10.6.8 and want to update. what can it support? Everything i try, it won't support! I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account. Can anyone give me some advice besides buying a newer laptop?

    Lion 10.7.5 is as far as you can go. You must have at least 2 GBs of installed RAM.
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. Or you can order directly on the online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • BI Publisher Report can only seen when logged in as Admin

    Hi gurus,
    We have OBIEE is set up on Windows 2003 server and configured to use Active Directory (AD) authentication. In one of the dashboards, we have a BI Publisher Report embedded. This was working fine until we configured the BI Server to use AD.
    After the AD config, when logged in any user other than Administrator, the BI Publisher reprot throws up the error " Login Failed. Please contact Administrator for Username & Password".
    All the required roles have been created on BI Server and granted to the requird users. I am at loss with this error.
    Any help will be much appreciated.
    Regards
    Mahesh

    Did you create an Open Firmware password as well? If not then just insert the OS X Installer Disc into the optical drive and restart the computer. After the chime press and hold down the 'C' key until the spinning gear appears below the dark gray Apple logo.

  • User settings to access network when logged on as service/batch

    Hi.
    We have been running Oracle Remote Agent (running external jobs on other host) on some linux-distros and have now started to do it on Windows as well.
    But when we have setup everything properly, we get an 'Access denied' when trying to access the network from the Remote Host.
    The way it works, in the database, you set up a credential with a user name and password. This information is then sent to the ETL (Remote Agent) which then starts the process as the user supplied in credentials.
    So the service it self is running as Local Service and then starts a process as another user. Technically, how this is done on Windows I don't know...
    Anyhow, the process starts fine and if we are not trying to access the network, it works fine.
    But as soon as we are trying to access a network share using UNC path (\\192.168.1.10\share\directory), we get an 'Acces is denied'
    The user we are using is an administrator. When doing a desktop login, this user can access the share without any problem.
    Is there any other settings/policy/property the user must have to be able to access the network when logged on but not from the desktop?
    Cheers
    Richard

    Have you checked the security logs on 192.168.1.10?
    You should see the entries showing what account is attempting to log on through a network connect.  You may need to grant the User Right for "Allow Access from Network" and you may be having basic folder permission errors.
    I'm curious if the process is using the machine account to hit the share or if it's the user account you're starting the process with.
    Chris Ream

  • Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

    My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

    when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How to get iVIEW displayed when logged in a non administrator

    Hello friends
    I have configured EP in such a way when I login as a user with admin rights, it displays the right iview I want. But it also displays the CONTENT ADMIN,  USER ADMIN,  and SYSTEM ADMIN tabs also.
    I want to create a user which displays the ivew I want but not these admin related tabs.
    If I remove the role SAP_J2EE_ADMIN then the iview doesn't show up at all. I even tried just putting SAP_J2EE_GUEST role but didn't work.
    Any suggestions?
    Thanks in advance
    Ram

    Thanks a lot Santhosh for the response.
    I have created a group that has the right roles defined.
    I have created 2 users. One with admin rights and another without admin roles(SAP_J2EE_ADMIN)
    When I login as the user with Admin rights I see the iview that i need.
    However when i login as the other user with out Admin rights I dont see this iview.
    As I said in the beginning both belong to the same group that has right roles defined. Only difference between the two user accounts are that one has SAP_J2EE_ADMIN role added and the other one don't.
    So I would like to know why this other user, when logged in doesn't see the iview.
    Hope I have explained it clearly. If you have any further questions please let me know.
    THanks
    Ram

  • My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

    My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

    On your iPad tap Settings > Store
    Switch Books off then back on then reset your iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • Blue screen when logging into windows server 2008 r2

    when logging into windows server 2008 r2, all I have is a blue screen and the mouse. 
    I tried looking for solutions on the internet, then I found a microsoft hotfix "http://support.microsoft.com/kb/2590550" I run the hotfix in command line but it gave me nothing, no error or success messages.
    I tried to reboot but I still have the same problem. 
    Is there any solution to this problem ?? 

    Hi,
    Thank you for posting in Windows Server Forum.
    Did you face this issue during remote session or console session?
    In addition, have you try to change or install any driver\software which cause this problem?
    Have you use any debugging tools from Microsoft to find respective error cause?
    You can refer following article for memory dump.
    How to read the small memory dump file that is created by Windows if a crash occurs
    http://support.microsoft.com/kb/315263/en-us
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Error when logging on (MSG_LOGIN_FAILURE)

    Dear Friends,
                          I am configuring a SOAP TO RFC scenario.
    1.)I have generated a WSDL file .while testing through the SOAP UI tool I am getting a empty response from SAP .
    2) While debugging the application I found when i double click on the SENDER INTERFACE IN THE RECEIVER DETERMINATION in ID.
    Its throwing a error saying:-
    ERROR IN LOGGING:-
    Details
    Error when logging on (MSG_LOGIN_FAILURE)
    MESSAGE ID: com.sap.aii.ib.gui.script.rb_all.MSG_LOGIN_FAILURE
    STACKTRACE:
    com.sap.aii.ib.gui.script.LoginException: Error when logging on
        at com.sap.aii.ib.gui.script.ScriptServer.open(ScriptServer.java:51)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
        at sun.rmi.transport.Transport$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.rmi.transport.Transport.serviceCall(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
        at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
        at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
        at sun.rmi.server.UnicastRef.invoke(Unknown Source)
        at com.sap.aii.ib.gui.script.ScriptServer_Stub.open(Unknown Source)
        at com.sap.aii.ib.gui.script.ScriptClient$OpenRunnable.run(ScriptClient.java:75)
        at com.sap.aii.utilxi.misc.thread.ThreadPool$ThreadPoolThread.run(ThreadPool.java:321)
    3)Is it due to this I am not getting response or something wrong in mapping:----
    Please help !!!!
    Thanks,
    jeevan.

    Hi,
    >>>1.)I have generated a WSDL file .while testing through the SOAP UI tool I am getting a empty response
    did you put the user/pass details in SOAP UI while executing the call?
    you can do in the the SOAP UI attributes on the left and down corner
    you need to put user and pass otherwise XI will not accept the call
    Regards,
    Michal Krawczyk

  • I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    Hello there, Minig1501.
    The following Knowledge Base article has some information on the message you're receiving:
    Unable to use Apple Push Notification service (APNs)
    http://support.apple.com/kb/TS4264
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How do I get 3rd party photo software to work when logged in as myself?

    As someone who works with expensively in photography, Aperture is one of my main software programs for processing photos, Now, with Apple apparently no longer supporting Aperture in the near future, I need to find a replacement. I have spent years avoiding anything made by Adobe except Reader, but bit the bullet and purchased an out of the box (not monthly rental) version of Lightroom, When I opened it after downloading, it didn't work. I kept getting an error message about the modules not changing properly.  After searching for an extended period of time for how to contact Adobe tech support by phone, I was left to attempt to find a fix through their support community similar to this one. I received a couple of emails that attempted to help, but none of them worked, or allowed me to use the program at all, until it was suggested I log out and then log back in as another user to see if that works.  So I did that and redownloaded the software as the new user and it worked perfectly.
    But when I logged back out and then back in as myself, I was back to the same issue as before and I still can't use it as myself. This is highly problematic, given the number of photos I have access to when logged in as myself. Besides, I want to be me, not a different person.
    Is there anyone out there that can give me a "For Dummies" explanation of how to get the stupid software to work as myself instead as someone else? I already tried several times to uninstall and then redownload the program, but that didn't help. (God, I hate Adobe software!)
    Thanks for any assistance you can give.

    Frank:
    You make good points. Please allow me to make a couple myself:
    1. I am a serious photographer. And the first place I go with my RAW files is Aperture. I love Aperture. I also understand that it's not going away, so I will continue to use it. But if all the articles appearing in photography-related publications are correct, it eventually will be far behind newer versions of other photography software. It would be similar to something like if all my friends were using Mavericks OS, but I continued to use Panther OS. They would be far ahead of me in ability to do terrific stuff. Should the prognosticators prove correct about Aperture, then I will eventually need a replacement to stay current. In reading a plethora of articles, many of which were comparative from one photo app to another, I reluctantly decided to go with Lightroom. I dislike Adobe, hence, my reluctance. But it seemed the best of a series of poor replacements for Aperture. I didn't want to pay Adobe an annual fee equal to the cost of a single out of the box Lightroom product, so I did go out of the box in this instance. And my thought is that while I will continue to use Aperture for the near future, it might behoove me to practice on Lightroom so I am familiar with it if I eventually abandon Aperture.
    2. Your second point is that this is an Apple forum, not an Adobe forum. Point taken. I have always gotten terrific assistance when I come here for help. I went to the similar community in Adobe and the responses I got there were not as functionally helpful as what I usually get here. And since it seemed that it was eventually found to be a user issue, rather than a software issue, it would seem that a community of Apple users would be of more assistance than a community of 3rd party software users. So I came here. And what do you know? It seems that the information I received here was far superior/helpful to what I got over there. It turns out my faith in the Apple community was well-placed.
    When I get back home from work this evening, I'm going to take the info I received from Leonie and yourself and attempt to resolve my user issue. I'm keeping my fingers crossed.

  • LC_NUMERIC and LC_TIME bash warning when logging into TTY

    I recently re-installed Arch after bouncing around a few distributions, and ever since I completed the install, I've had the following error when logging in to the TTY (only there, never noticed it anywhere else).  Specifically, the error reads:
    -bash: warning: setlocale: LC_NUMERIC: cannot change locale ()
    -bash: warning: setlocale: LC_NUMERIC: cannot change locale ()
    -bash: warning: setlocale: LC_TIME: cannot change locale ()
    -bash: warning: setlocale: LC_TIME: cannot change locale ()
    Output of locale:
    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE="en_US.UTF-8"
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES="en_US.UTF-8"
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    LC_ALL=
    locale -a
    C
    en_US.utf8
    POSIX
    en_US.UTF-8 is also uncommented in locale.gen, and it's been generated.  I haven't gotten any locale errors in any application I use, and it only appears before the prompt after logging in to a TTY screen.  I've also not set those variables to anything else in /etc/profile, /etc/bash.bashrc, .profile/.bashrc.  Logging into the root user instead of my user account does not result in the errors.  Also, it seems from the error that the locales are being set to "", and I can't for the life of me figure out where it's coming from.  I've searched the forums for similar problems, and most of these errors included warnings about files and folders not existing, which doesn't happen here, and were resolved by re-generating the locale (I've tried it, no change).  The only one that came close was an old forum thread about guarddog generating a different set of locale's using incorrect locale definitions, which resulted in the same errors.  If anyone has a suggestion as to how to fix this (or a handy trick for finding all files where locales are set), I'm open to them.
    .bashrc:
    # .bashrc (2013, Dec 11)
    [ -z "$PS1" ] && return
    # set a fancy prompt (non-color, unless we know we "want" color)
    case "$TERM" in
    xterm-color) color_prompt=yes;;
    esac
    if [ -n "$force_color_prompt" ]; then
    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
    # We have color support; assume it's compliant with Ecma-48
    # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
    # a case would tend to support setf rather than setaf.)
    color_prompt=yes
    else
    color_prompt=
    fi
    fi
    if [ "$color_prompt" = yes ]; then
    PS1="\[\e[0;37m\]⮀\[\e[0;32m\]\u\[\e[0;36m\]@\[\e[0;32m\]\h\[\e[0;37m\]:\[\e[0;33m\] \W\[\e[0;37m\]\[\e[0;37m\]\$\[\e[0m\] "
    else
    PS1="\[\e[43m\]\[\e[31m\]\u\[\e[0;33m\]\[\e[46m\]⮀\[\e[34m\]\h\[\e[0;36m\]\[\e[47m\]⮀\[\e[33m\]\W\[\e[0;37m\]⮀\[\e[0m\] "
    fi
    unset color_prompt force_color_prompt
    # Alias definitions.
    # You may want to put all your additions into a separate file like
    # ~/.bash_aliases, instead of adding them here directly.
    # See /usr/share/doc/bash-doc/examples in the bash-doc package.
    #if [ -f ~/.bash_aliases ]; then
    # . ~/.bash_aliases
    #fi
    # enable color support of ls and also add handy aliases
    if [ "$TERM" != "dumb" ] && [ -x /usr/bin/dircolors ]; then
    eval "`dircolors -b`"
    alias ls='ls --color=auto'
    #alias dir='ls --color=auto --format=vertical'
    #alias vdir='ls --color=auto --format=long'
    #alias grep='grep --color=auto'
    #alias fgrep='fgrep --color=auto'
    #alias egrep='egrep --color=auto'
    fi
    ##custom aliases
    alias ls="ls -la --color=always --classify"
    alias lh='\ls -a --classify | grep "\."'
    alias halt="sudo shutdown -P now"
    PATH=$PATH:$HOME/.rvm/bin:$HOME/.gem/ruby/2.0.0/bin # Add RVM to PATH for scripting
    .profile:
    # ~/.profile: executed by the command interpreter for login shells.
    # This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
    # exists.
    # see /usr/share/doc/bash/examples/startup-files for examples.
    # the files are located in the bash-doc package.
    # the default umask is set in /etc/profile
    #umask 022
    # if running bash
    if [ -n "$BASH_VERSION" ]; then
    # include .bashrc if it exists
    if [ -f "$HOME/.bashrc" ]; then
    . "$HOME/.bashrc"
    fi
    fi
    # set PATH so it includes user's private bin if it exists
    if [ -d "$HOME/bin" ] ; then
    PATH="$HOME/bin:$PATH"
    fi
    PATH="$PATH:/usr/local/sbin"
    PATH="$PATH:/usr/local/bin"

    An update:
    I've tried explicitly exporting both variables with en_US.UTF-8 in my bashrc, which has resulted in no change whatsoever.  Checking the value of these variables from my running system yields an empty return (i.e. the variables aren't set).  Can someone let me know if these variables are set on their system?  If they are, I'll see if I can set them manually and if that resolves the issue.

  • In Lion, how do you bypass managed prefs when logging on?

    in Lion, how do you bypass managed prefs when logging on?

    Ahh, that's a Lion Server question...sorry, can't help.
    Someone else hopefully will be along to answer for you.
    EDIT: won't help you in the short-term, but long term might be worth investing in this:
    http://shop.oreilly.com/product/0636920022664.do

Maybe you are looking for