Autofill Stopped working after Yosemite install

I cannot get my autofill to work in Safari, I checked my Contact card, I made the Card Mine, Auto fill is selected Safari Preferences - AutoFill, I moved the AutoFill Icon to the Preference bar..... I am frustrated

Hi Eric, it is Safari but I thunk I've solved it by dragging the autofill into the safari toolbar and clicking on it when I want to use the fearture. Nothing else worked. this OS is a crock as far as I am concerned.

Similar Messages

Autofill stopped working after installing latest OS Mountail Lion update Can anyone help? I've gone into preferences and

Autofill has stopped working after installing latest update to OS X Mountail Lion (10.8). Latest of many problems with this OS - wish I had never upgraded to it. Can anyone help?

Hi Eric, it is Safari but I thunk I've solved it by dragging the autofill into the safari toolbar and clicking on it when I want to use the fearture. Nothing else worked. this OS is a crock as far as I am concerned.

Epson printer stopped working after yosemite

All of a sudden, after Apple autoupdate installed yosemite update and new epson drivers, my printer will only print first line of a document.
I've tried deleting and reinstalling printer, repairing and verifying drive, deleting printer library files, unplugging, rebooting... nothing is working. Does anyone have a solution for me? Help!

My Epson WF-4360 "lost it's mind" after being accidentally unplugged for most of a day.
The printer DID work from Yosemite both before and after the "loss of power"
The printer DID work from iOS before the loss of power ... but stopped working after that
ALL the printer status reported to be fine -- showed the wi-fi network address and connection ... but was NOT discoverable from iOS
This fix resolved the issue:
Find the wi-fi IP address of the printer -- either from the printer or the network (mine was a local IP ... 10.0.1.n)
Go to Safari on the iOS device -- enter the IP address of the printer
Scroll down to the BASIC SETTINGS on the left side menu
Scroll down to the AirPrint Setup button ... click to start
Click OK -- to advance through the menus ... two separate browser pages for me
You will see AirPrint "Setup Complete"
From iOS ... the printer is now discoverable.

DVD drive stopped working after Mavericks install

I have a Macbook Pro (late 08 model) that was running Snow Leopard. I recently did a clean install of Mavericks and since then the DVD drive just spins and ejects discs without being able to read them (doesn't seem to matter what I use. Software, games, audio cds, etc..). It was working fine before installing Mavericks and I can still boot from the DVD drive (old snow leopard boot disc) but it won't read any discs once booted into the OS even though the OS is detecting the drive just not the disc when inserted.
I've tried resetting the NVRAM/PRAM and resetting the SMC as suggested on other forums but like many others with the same issue it didn't help. I also cycled through several drutil commands as suggested to "wake up" the drive but that didn't help any either.
I'm kind of stumped here guys. I could roll back to Snow Leopard but I've got some software thats dropping support so I'd rather be running Mavericks if I can sort out this DVD drive issue. Clearly its not the drive itself since it worked fine before and I can boot from it. Any ideas?

Hrm looks like I might of fixed it. I went back after seeing another post about spamming drutil commands to "wake up" the drive and just spammed them about 20 or so times and the drive started working again.
I'm still very confused as to why it just stopped working within the OS after installing Mavericks (yet I was still able to boot from the DVD just fine). Clearly something is bugged in mavericks. I even came across a post on the apple forums from someone with this issue and it was effecting both his late 08 and early 2013 Macbook Pros.
I'll keep an eye on my own machine to see if it stops working again but for now it seems my drive is "fixed" go figure.

Yahoo messenger voice chat stopped working (after archive & install)

I have an iMac5 Intel Core 2 Duo 2.16 GHz. I (actually my wife) was using Yahoo Messenger v3.0 beta 4 (built 156957) for all chat and voice chat. About 2 months ago voice chat stopped working. when i send invite, it keeps ringing (but the receiver never sees any invite). When the other person sends me an invite, I don't get anything.
I have downloaded Gizmo, but it also keeps "connecting...".
About 2 months ago, I had to archive and install to solve a Java update issue which was causing wierd problems. Thanks to BDAqua's advice I managed to resolve that. I have J2SE 1.4.2 and 5.0; everything else is working fine.
What can cause voice chat to stop working? Is there some vc plugin in library that needs to be there, which has disappearted after my "archive and install'? Please advise. thanks Fahd

Hi again Fahdali,
Have you tried reinstalling it since then?
http://www.apple.com/downloads/macosx/email_chat/yahoomessengerformac.html
Or...
http://wiki.answers.com/Q/CaniChat_be_used_with_yahoomessenger

Boot keys stopped working after Leopard install

I have seen others having this problem in another thread but no answers, so thought I'd give it a go.
After reading these threads finally got Leopard to install and run okay. Many thanks all. But, along the way, my boot keys stopped working. It doesn't matter what I hold down, whether 'c' or 'cmd-opt-p-r' or 'shift' or any other key combination the machine just boots straight into Leopard.
I have tried resetting the PMU (or whatever it is these days) via the internal button in desperation but still no luck.
Anyone with any ideas?

Same problem here, so I'll pull this post up. No key works.
I always have to go to the Start Drive (or whatever it's called in english) in Preferences Panes and choose the partition I wish to start directly in OSX or Windows for booting back to OSX. This is very annoying. Alt key won't show up any possible boot disk although their both internal drives.
If someone would kindly post any ideas how to change that, would be great. I've done a fresh install, with a Time Machine recovery, but this didn't seem to help.
EDIT:
I found another subjet here from november '07:
http://discussions.apple.com/thread.jspa?threadID=1224639
it seems the new Apple Keyboard is the origin of the Problem on iMac Core Duo. Apple techs said that a new firmeware should be coming before the end of 2007 (but it's february 2008 now ?!?). Any other ideas how to get this work ? I'll write on Aplpe feedback page for sure. Maybe the other boot keys aren't working because of this keyboard too.
Message was edited by: Nordlaser

8i on NT Listener stops working after Designer install

We installed Oracle 8i Enterprise Edition 8.1.5.0.0 on NT. Database worked fine. After installing Designer 6.0, the Listener will not start.
FYI, for the Designer installation, we used the same ORACLE_HOME name as the database, but a different directory location. Any suggestions?
Please redirect us to another forum if appropriate.
Thanks,
-Don & Van
null

Ravi,
Thank you for your prompt reply.
1. Your answer would suggest that we have not installed the products in the proper order. Would you suggest that we de-install and re-install in the order you listed?
2. Could the installation order have caused the Listener to stop working?
3. Can you suggest another approach to resolving the Listener issue other than re-installing Designer and Oracle 8i in the order you suggested?
Thanks again,
-Don & Van

9i Report Builder stops working after 10g install

I have the 9i Developer Suit installed and recently I installed the 10g Developer Suit. After installing the 10g Developer Suit the 9i Report Builder stopped working. When I try to start it, it hangs at the launch screen. All the other apps in the 9i and 10g Developer Suits seem to work except for the 9i Report Builder. Please Help.

Nope. The 10g report builder works fine. The issue is only with the 9i report builder.

Itunes stops working after update install

Anyone have the issue where itunes stops working post the latest update install? Ive even uninstalled itunes and attempted to reinstall and it doesnt work

Hey Rockettman23,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. I also understand that you have already attempted to reinstall iTunes. You can use the steps in this resource to further isolate the issue to user-specific or system-wide:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

CD/DVD Reader Stopped Working After Yosemite Upgrade

My partner and I both have Mac Mini's (late 2012) versions. They came loaded with Mavericks. He recently upgraded to Yosemite and I did not. I have heard there are "Wi-Fi" issues and "don't want to fix something that ain't broke"!! He connects directly to our ATC, so he doesn't need to be concerned about those issues, however; he came home from getting an Xray yesterday and wanted to copy the CD they gave him. He's never done that before, so I said: "Sure, give me a blank and I'll burn a copy for you. Loaded up the Xray CD on his Mac and it started to read then just quit. The drive did not show up in the sidebar of Finder, like it does in Mavericks.....OK, so let me take the disc into my office and see if I can read. No problems, the disc loaded right up. I copied the files into my "Burn Folder"; loaded up the blank and burned all the files to it; just like it's supposed to. This morning I thought maybe his drive might be bad. We both have the same external USB 3.0 CD/DVD burners. Brought the drive and his cable into my office, plugged it in and it took off working like it was supposed to. So that eliminates the drive and cable. Took it back into his office and plugged it into a "known" good port on his machine, same thing, no work and had to eject the disc with a paper clip in the eject hole. Although his machine seems to address the drive (it will start and spin the disc), nothing shows up in his sidebar or desktop. Help...What's the problem???

This might help. If you haven't done so yet, try installing Apple's SuperDrive Firmware Update 3.0, which is on Apple's support site at http://support.apple.com/en-gb/HT201953 to see if that resolves it. Although it's not specifically for that problem, the firmware update seems to be important for making external SuperDrives work in Yosemite, and it is one step I used to get my SuperDrive to work in a USB external case when plugged into my MacBook Pro.
Please let us know either way, whether the firmware update helps or not in your situation.

Mail app stopped working after I installed Yosemite

My Mail app is not working. I receive the below message every time I try to open it. How can I fix??

Welcome to the Apple Support Communities
Go to  > About this Mac and copy Version. If you have 10.6.8, see > http://support.apple.com/kb/TS4424

Safari doesn't work after Yosemite install

I've recently installed Yosemite in my iMac*. Everything works as supposed except for Safari. Every time the computer wakes from sleep Safari does NOT work at all. It doesn't load any site. The only solution so far is to restart the iMac.
any clues?
* 27-inch, Late 2009, 2.66 GHz Intel Core i5, 16 GB 1067 MHz DDR3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Camera not working after Yosemite Install 10.10.1 Macbook Pro early 2008

After installing Yosemite the camera does not work or even show up in system report. It appears not to be recognized at all by the OS. I have tried all of the suggested reset processes but no change. Any ideas?

dannfort wrote: ... OS X Yosemite (10.10.1)...
Your OS X Yosemite (10.10.1) is not the latest version.
Even if you have already updated to 10.10.2 by a different method, do the following:
• Restart Mac, repair disk permissions, then download and install OS X Yosemite 10.10.2 Combo Update.
• Repair permissions again following the restart that completes the Combo Update. Then try your camera again.
Message was edited by: EZ Jim
Mac OSX 10.10.2

ITunes has stopped working after fresh install

Hey there,
Hoping someone can help me out. I've had iTunes for a while but just had to get my computer repaired and after a fresh windows install I am not able to get iTunes to work. I've searched the help forums and tried many things already but had no success.
Some computer info:
Windows 7
Processor: AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G 3.40 GHz
Installed memory: 4.00 GB
System Type: 64-bit Operating System
The error report I get:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 12.1.1.4
Application Timestamp: 54de1991
Fault Module Name: CoreAudioToolbox.dll
Fault Module Version: 7.9.9.6
Fault Module Timestamp: 54ddd41b
Exception Code: c000001d
Exception Offset: 00000000001fa332
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 4f7c
Additional Information 2: 4f7c296d7de48197416f5a96255d8b8d
Additional Information 3: 9f55
Additional Information 4: 9f55f98d4376c33fdaaf6d0e91a7f07b
Please help me figure this out.
I have already tried the following:
- Uninstalling iTunes and all the components and reinstalling iTunes
- Uninstalling iTunes and reinstalling in Safe Mode (wouldn't work)
- Downloading iTunes for slower video cards and installing that (didn't work)
- Downloading an older version of iTunes (would just rollback during install and not let it complete)
- Tried a different user on my system and also didn't work
Any help is appreciated. I love using this product and would like to continue using it.

also when I open itunes in safemode (using shift+ctrl), it works normally...

10g stopped working after 11g installed. Getting ORA-12514: error

I had Oracle 10g installed in win2000 sp2. with port 1521.
I have installed Oracle 11g on the same system. with port 1522.
I am able to start both the instances and tnslistener but I am not able to connect to Oracle10g database. Getting following error.
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
I have done the following check.
c:\> tnsping tek10g
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 14-MAR-2
008 13:04:26
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\app\mmurugai\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = PC456)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = tek10g) (SRVR = DE
DICATED)))
OK (50 msec)
2) Checked lsnrctl services
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PC456.SYNTELORG.COM)(PO
T=1522)))
Services Summary...
Service "orcl11g" has 1 instance(s).
Instance "orcl11g", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
Service "orcl11gXDB" has 1 instance(s).
Instance "orcl11g", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: PC456, pid: 284>
(ADDRESS=(PROTOCOL=tcp)(HOST=PC456.SYNTELORG.COM)(PORT=2963))
Service "orcl11g_XPT" has 1 instance(s).
Instance "orcl11g", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
The command completed successfully
LSNRCTL>
I am not able to see my tek10g 10g database details.
I also checked my tnsnames.ora file which has the entries properly.
Sqlnet.ora file has
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
How to solve this issue? Is that possible to run oracle 10g and oracle 11g in same host?
Thanks in Advance...
regards,
Manikandan

The approach I would take, in general is:
1) pick a listener, and only one. Get that working.
2) Make sure all the databases register to that listener
3) Fix the TNSNAMES.ORA files appropriately.
To fix the listener
1) Verify the listener address matches the current environment
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\app\oracle\product\10.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oracle\app\oracle\product\10.2.0\server)     << - MUST point to correct HOME
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = myHOST)(PORT = myPORT))
)where
myHOST is this host's resolvable name or IP address
myPORT is the port (default 1521) that the listener should monitor
The HOST is often a problem if the machine uses DHCP.
2) Register the databases
On startup, database will auto-register to the listener defined in the init parameter 'LOCAL_LISTENER', which defaults to 'HOST={current_host}, PORT=1521'
After startup, if the listener is taken down, you can register each database manually using the DBA command
ALTER SYSTEM REGISTER;
Either way, it should show up in the output of 'lsnrctl status'
While you are accessing the database, you might want to find out which services the database supports. That can be done in SQLPlus using the command
SHOW PARAMETER SERVICE_NAMES
Note that the database name is the default service name.
3) Fix [all] the TNSNAMES.ORA file[s].
Each SERVICE_NAME from the previous list that you want to access from this client, yu should find an entry that looks like
myTEST =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = myHOST)(PORT = myPORT))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = mySERVICE)
myTEST is the alias I want to look up by using it as the connect target string.
myHOST should match the HOST= entry in the LISTENER.ORA
myPORT MUST match the PORT= entry in the LISTENER.ORA
mySERVICE is the Service to which I am asking the listener to connect me, as found in the lsnrctl status output

Autofill Stopped working after Yosemite install

Similar Messages

Maybe you are looking for