Autofill won't work but it is checked off.

Autofill won't work but it is checked off. I went through the normal steps to try to fix it. it used to work and suddenly stopped.

Explain what you mean by "still won't work." State everything you did to activate it and what exactly happens when you try to use it.
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime and iMessage activation
Message was edited by: modular747

Similar Messages

Since installing IOS6 autofill won't work in Safari.

Since installing IOS6 on my Ipad3, autofill won't work in Safari. It used to fill my name and address. Please help!
I've enabled Autofill, switched off Private Browsing, turned off Block Pop Ups...it was fine till I began with IOS6.

Hi all,
it seems that the root cause for this issue is identified:
Unfortunately it's not a bug, but a bufix which is responsible for this changed behaviour of autocomplete function in Safari browser.
The bugfix was introduced in iOS 6 and corrects that password input elements on HTML forms with the autocomplete attribute set to "off" were being autocompleted although they should not.
You can check if this is also the root cause in your case by searching in the source code of the webpage with the HTML form if the autocomplete tag is present and set to "off":
<input type="Password" name="password" ... autocomplete="off" ... >
References:
[1] http://support.apple.com/kb/HT5503 (search for string "CVE-2012-0680")
[2] http://www.cvedetails.com/cve/CVE-2012-0680/

When I hover over the Bookmark Icon for a few seconds it won't work but when I go straight to the icon and click on it, it will work. Running windows 7

When I hover over the Bookmark Icon for a few seconds it won’t work but when I go straight to the icon and click on it, it will work. Running Windows 7.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Firefox won't work but Safari will???

Firefox won't work but Safari will?
Firefox was already loaded on my macbook pro but won't work??

Firefox doesn't come preloaded on new Mac's.
So you must have gotten this machine used and the person set up Firefox with a proxy amongst other "tweaks" that your not aware of, possibly even remote access to your machine.
If this is a used machine you bought, ideally it would be best to backup any files you have to a external drive, c boot off the installer disk the other person should have given you and use Disk Utility > Erase > Zero and format the drive HFS+ Journaled. Quit and install OS X and start with a fresh machine.
If you don't have the disk, a $29 Snow Leopard install disk is avaialble from Apple (no iLife programs, sold seperatly) which you can do the same as above.
If you don't want to do this, then delete Firefox and it's Library > Application Support > Firefox folder and reinstall it fresh from Mozilla.
Just reinstalling Firefox alone doesn't work, the support files need to be trashed as well.

HT204291 Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

Reboot your router. The icon only shows when connected to wifi and Apple TV or similar device. Same thing happened with my phone and the icon appeared in control center after router reboot.

My batch action won't work but when I run the action on a single picture it works

I'm on a Mac and I set up 2 actions the first one to resize a photo and the second one to make a frame with my photography business logo on it. The actions have previously worked fine with no issues and now all of a sudden it won't work on a batch action but it will work fine on a single photo. Please help!!!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
-Griff W.

I updated my ipod touch and now it won't work but itunes says everything is fine. What should I do?

I was updating my itouch that I got in September to the IOS 5 and everything went fine until the end of the update when it was creating a new back-up of the information on the itouch. When I saw that it didn't work and it told me to restore the previous bakc-up I tried that, but nothing happened. Itunes was doing a lot of work but my ipod touch didn't show that anything was happening. My ipod touch wants me to go back through the set up and when it gets to the part where you can restore a previous back-up I tell it to do that. The problem then is that it tells you to connect it to itunes and I do but the itouch doesn't seem to realize that it is plugged into itunes. Then I try to restore the old back-up form itunes and it immeadiately pops up saying htat it can't because of error: ipod (-50).

Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694

HT3964 On my macbook pro my keyboard backlight won't work but it use to. I think i pressed something in the settings? please help me!

The backlight on my macbook pro isnt working but it use to work before by using the F5 and F6 keys. I think i pressed something in the settings to change this. please help me!

If you are in a well lit area this will pop up on the screen.

My Calendar synchronized with my Webmail provider is always remaining Swithched Off (Case: "Switch this calendar on" works but after immediatly becomes Off)

After installing Lightning 3.3 I created a new Calendar (infomaniak).
This Calendar is synchronisaning with my Webmail Provider (www.infomaniak.ch).
Il followed the instructions from my Webmail Provider (user name and password).
When this is created normally I have to received the display to write my User-Name and Password but theese are not asked.
The calendar informaniak es created but is always Switched Off.
Thanks a lot for helping.
Felipe Valenz
1028 Préverenges
Switzerland
e-mail: [email protected]

Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't see it nor will they respond to it.
Signed,
Just another customer

My iphone 3g sound doesn't work but goes on and off when i'm using headset,

my iphone 3g sound doesn't work but when i plug in headset, the headset sound goes on and off. I think the speaker has a problem or touches but why does the headset not work but goes off randomly?Pls help me out

my iphone 3g sound doesn't work but when i plug in headset, the headset sound goes on and off. I think the speaker has a problem or touches but why does the headset not work but goes off randomly?Pls help me out

Since installing Snow Leopard safari autofill won't work

I have checked the safari autofill preferences and have the top box and bottom box checked (not the middle passwords).
This used to work well as soon as I would enter one letter in a form it would complete it. Now I must type in everything even in websites I have visited often and recently.
I had the "word won't print or save as" problem but installing the new 1.1 security update fixed that but not this autofill problem.
What can I do now?

Thanks for the link, but it still doesn't work for me. It fills in some of the information but refuses to do postcodes & countries and telephone numbers are a bit random. It still doesn't do email addresses on many sites - even sites I visit every day. The only thing it gets correct consistently is the first line of my postal address. I tried deleting the contact, creating a new one and making it me - but it still does exactly the same thing.
I finally gave up and ran Chrome. Oh the joy of coming back to a site I visited only yesterday and have all the data I entered available at the click of a mouse; instead of taking minutes to book airport parking it takes seconds! It's like browsers used to be (and, incidentally, much faster than Safari and correctly renders all the sites I visit). It's so frustrating that Apple can't make something work that other browsers have been doing for decades.

Macbook screen won't work, but external monitor works fine...

Hey guys - are there any solutions out there for this problem that doesn't involve hundreds of dollars? A mate of mine spilled beer on a macbook - had to pay for it, I fired it up and everything works fine but the screen... Is there a way that I can check the connections or dry something off? Apple told the owner to throw it in the bin - but it works fine plugged into a monitor. The screen isn't cracked or chipped - all looks fine - I'm guessing that fluid had got into a connection somewhere. Help me Gurus!
Cheers

Have you tried drying it without the back cover and upside down? l heard it worked for some guy

DVD drive won't work but it will burn disk?

imac 2.4Ghz - 10.5.8
For sometime now my DVD drive spits out Cd's/DVDs as soon as I put it in. Strange thing is, it will let me put blank media in and will allow me to burn disks.
It's getting really annoying now as can't do so many things I need to do.
I want to upgrade to Snow leopard but until this is sorted I can't. I know I can attach an external drive or replace it but I need to know that I've covered all areas before resorting to this.
Wondering if an upgrade caused this possibly?
Would be very grateful for any help anyone can give me?
Many thanks

Hello kfq
Welcome to Apple Support Communities
1. Check and clean those CDs and DVDs, SuperDrives are picky and don't like dirty, filmy, scratched, warped, out of balance media with labels on them!
2. Check the Apple > System Preferences > CDs & DVDs to make sure that they were set correctly. To include toggling/re-setting them to something else and back, forcing the system to re-write the preferences.
3. Download the 10.5.8 Combo Update from the following Apple Support page and install it over the top of the current 10.5.8 > http://support.apple.com/kb/DL866
Dennis

Trace function won't work but why?

Okay, I used to use Flash MX+ and AS1 & AS2 alot and am
now ramping up to AS 3.0. This sounds simple and dumb, but I cannot
for the life of me get the trace() function to work. If I put this
into a new .fla:
function hello(){
trace('Hi');
hello();
I get nothing. Blank. Nothing in Output or anywhere. Can
anyone tell me why? I know trace() should be simple and I used to
use it a ton. Please help!
Thanks in advance!

What in the )$#)$#@!#@$$ stinkin #$@!!#@$$
Can you explain the filters to me? That is new?
I've asked this elsewhere and no one told me that. THANK YOU
SO MUCH. But I'd like to understand what the deal is....

Mac wireless internet won't work, but PC will. Help??

I recently joined a sorority and whenever I am at my sorority house studying, it takes my macbook pro an average of a half an hour to connect to the wireless internet. When it finally connects, it seems random. I cannot figure out what makes it suddenly work. Sometimes I wait so long for it to connect that I am forced to give up. Other girls who live in the house have some issues, but not as many as me and the girls who have PCs don't have any issues. Again, the girls who own PCs don't have ANY issues with the wireless internet. Also, my internet works fine on campus, in my apartment, at my parents house, etc...
Because I don't have any control over the internet I don't know what kind of router it is or anything, which I know would be helpful. However this just seems like such a specific problem that I was wondering if anybody had any ideas to make it work. I've gone through the network diagnostics numerous times and have done what I can within the network preferences.
I'm supposed to live in the house in the fall. Someone please help!
Thanks!
Paige

Do you have a choice of more than one wireless network? If you hold down an "option" key when you pull down the AirPort menu bar item, what value do you see for "RSSI"?

Autofill won't work but it is checked off.

Similar Messages

Maybe you are looking for