Autogrow of file '' in database
Dear Friends,
please help me.
one of my live database size 41 GB it's log file set restricted growth
2097152 mb, we enable compress backup option but the size of the backup file is 30 GB,in recently I checked in error log I got below message .
Message
Autogrow of file '' in database '' was cancelled by user or timed out after 29874 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
Thanks in Advance.
mastanvali shaik
Hi,
Above message points to fact that autogowth value is incorrectly set/or set to high value for database file. You should read below article for details. Have you set autogrowth in percentage? please change it to MB
http://support.microsoft.com/kb/2091024/en-gb
Make sure SQL server account has SE_MANAGE_VOLUME_NAME permission see below link
http://msdn.microsoft.com/en-us/library/ms175935.aspx
For correct autogrowth values please read
https://www.simple-talk.com/sql/database-administration/sql-server-database-growth-and-autogrowth-settings/
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles
Similar Messages
-
Help needed in reading text file to database table
Hello experts,
i have to insert the values from the column of this text file and insert them in my database table.
I have done a few file to table insertions but i'm having some trouble with this one.
Any suggestions plz
thanks
liab_report 1.00 Page: 1
CDC:00537 / Mon Jun-21-2010 LIABILITY REPORT Mon Jun-21-2010 22:06:26
DRAW 1; SET 1; November 7, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 701040.00 0.00 660146.00 0.00 40894.00 0.00 0.00
Div3 1444128.00 0.00 1330056.00 0.00 114072.00 0.00 0.00
Div4 4711900.00 0.00 3889700.00 0.00 822200.00 0.00 0.00
6857068.00 0.00 5879902.00 0.00 977166.00 0.00 0.00
DRAW 2; SET 1; November 14, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 817817.00 0.00 817817.00 0.00 0.00 0.00 0.00
Div3 1687405.00 0.00 1611742.00 0.00 75663.00 0.00 0.00
Div4 3402100.00 0.00 3034200.00 0.00 367900.00 0.00 0.00
5907322.00 0.00 5463759.00 0.00 443563.00 0.00 0.00
DRAW 3; SET 1; November 21, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 779933.00 0.00 769804.00 0.00 10129.00 0.00 0.00
Div3 1605548.00 0.00 1525104.00 0.00 80444.00 0.00 0.00
Div4 4891700.00 0.00 4256800.00 0.00 634000.00 0.00 900.00
7277181.00 0.00 6551708.00 0.00 724573.00 0.00 900.00Plz clarify whether u want to load text file as a file into database or value of this text file into database. If values are to be loaded from this text file, U can better format the text file and use SQL loader to load the file into database. By formatting the database, i mean remove the unnecessary headings and characters, kee only the values to be loaded idelimited by ' '(space) or ','(comma). Create a control file and load it into the target table.
-
How to save pdf file in database
Dear All,
my application is forms 6i and database is 8i,requirement is that how to save pdf file in database and users can view through formsI'll apologize up front for the length of this post. I have a few database procedures I created that write a file to a BLOB column in a table as well as retrieve the BLOB from the column after it stored there. I have successfully stored many different types of binary file to the database using these procedures - including PDF files. I have not used these procedures in a Form so I can confirm that they will work, but theoretically they should work. I'm including the code for each procedure in this posting - hence the apology for the long post! :-)
Also, since these procedures reside on the database you will need to use Forms TEXT_IO built-in package to write your file to the server before you can use these procedures to store and retrieve the file from the database.
These procedures reads and writes a binary file to a table called "LOB_TABLE." You will need to modify the procedure to write to your table.
-- Author : Craig J. Butts (CJB)
-- Name : load_file_to_blob.sql
-- : This procedure uses an Oracle Directory called "IN_FILE_LOC". If you
-- already have a directory defined in the database or would prefer to use
-- a different Directory name, make sure you modify line 21 to reflect the
-- new Directory name.
-- ==================================================================================
-- History
-- DATE WHO DESCRIPTION
-- 12/11/07 CJB Created.
CREATE OR REPLACE PROCEDURE load_file_to_blob (p_filename IN VARCHAR2) IS
out_blob BLOB;
in_file BFILE;
blob_length INTEGER;
vErrMsg VARCHAR2(2000);
BEGIN
-- set the in_file
in_file := BFILENAME('IN_FILE_LOC',p_filename);
-- Get the size of the file
dbms_lob.fileopen(in_file, dbms_lob.file_readonly);
blob_length := dbms_lob.getlength(in_file);
dbms_lob.fileclose(in_file);
-- Insert a new Record into the tabel containing the
-- filename specified in P_FILENAME and a LOB_LOCATOR.
-- Return the LOB_LOCATOR and assign it to out_blob.
INSERT INTO lob_table (filename, blobdata)
VALUES (p_filename, EMPTY_BLOB())
RETURNING blobdata INTO out_blob;
-- Load the file into the database as a blob.
dbms_lob.open(in_file, dbms_lob.lob_readonly);
dbms_lob.open(out_blob, dbms_lob.lob_readwrite);
dbms_lob.loadfromfile(out_blob, in_file, blob_length);
-- Close handles to blob and file
dbms_lob.close(out_blob);
dbms_lob.close(in_file);
commit;
-- Confirm insert by querying the database
-- for Lob Length information and output results
blob_length := 0;
BEGIN
SELECT dbms_lob.getlength(blobdata) into blob_length
FROM lob_table
WHERE filename = p_filename;
EXCEPTION WHEN OTHERS THEN
vErrMsg := 'No data Found';
END;
vErrMsg := 'Successfully inserted BLOB '''||p_filename||''' of size '||blob_length||' bytes.';
dbms_output.put_line(vErrMsg);
END;
-- Author : Craig J. Butts (CJB)
-- Name : write_blob_to_file.sql
-- Descrip : This procedure takes a BLOB object from a database table and writes it
-- to the file system
-- ==================================================================================
-- History
-- DATE WHO DESCRIPTION
-- 12/11/07 CJB Created.
CREATE OR REPLACE PROCEDURE write_blob_to_file ( p_filename IN VARCHAR2 ) IS
v_blob BLOB;
blob_length INTEGER;
out_file UTL_FILE.FILE_TYPE;
v_buffer RAW(32767);
chunk_size BINARY_INTEGER := 32767;
blob_position INTEGER := 1;
vErrMsg VARCHAR2(2000);
BEGIN
-- Retrieve the BLOB for reading
BEGIN
SELECT blobdata
INTO v_blob
FROM lob_table
WHERE filename = p_filename;
EXCEPTION WHEN OTHERS THEN
vErrMsg := 'No data found';
END;
-- Retrieve the SIZE of the BLOB
blob_length := DBMS_LOB.GETLENGTH(v_blob);
-- Open a handle to the location where you are going to write the blob
-- Note: The 'WB' parameter means "Write in Byte Mode" and is only
-- available in the UTL_FILE pkg with Oracle 10g or later.
-- USE 'W' instead for pre Oracle 10q databases.
out_file := UTL_FILE.FOPEN('OUT_FILE_LOC',p_filename, 'wb', chunk_size);
-- Write the BLOB to the file in chunks
WHILE blob_position <= blob_length LOOP
IF ( ( blob_position + chunk_size - 1 ) > blob_length ) THEN
chunk_size := blob_length - blob_position + 1;
END IF;
dbms_lob.read(v_blob, chunk_size, blob_position, v_buffer );
UTL_FILE.put_raw ( out_file, v_buffer, TRUE);
blob_position := blob_position + chunk_size;
END LOOP;
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks! -
Error while retreiving xml file from database
Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null. -
"Error retrieving xml file from database"
Hello All,
I have installed and configured planning with Shared services. While I try to create an instance in Configuration Utility by entering the Instance Name, Host Name, Port (8300) and Click "Next", I get this error -
*"System failure:Error retrieving xml file from database".*
My RDBMS is - SQL Server 2005
OS - Windows 2003 Server
I am unable to work on planning for few months due to this error.. I would sincerely appreciate if someone can provide me a solution for this..
Thanks much,
Varma.Hi,
Ive seen this before.
If this is a new environment could you create a blank database and configure it as your System database? Then try again and you should be fine.
I think you may have some invalid entries in your sys database.
Seb
www.taysols.com.au -
Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide SolutionHi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change................. -
Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AMThis has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/ -
System Failure:-Error while retreiving xml file from database
I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
Please help
ThanksI also have the same error. Win2000 Server and MS SQL 2005.
Maybe someone made request for official information from Oracle about this issue?
I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know... -
CR 2008 on SAP BW : Error on file filename : Database Connector Error
Hi,
We are facing a rather strange problem in our Prod box.
When we run a CR with a mandatory parameter from EP or Infoview,
For the first available LOV on Plant, (Plant is the Mandatory Parameter entry for the report)
For the first execution,
the Crystal report fails to execute and throws the following error.
Error on file <filename>: Database Connector Error
When we re-run the report with the same parameters, it executes and displays the result.
We are using Crystal Reports 2008 on SAP BW Query with SAP BW MDX Driver
Since the users currently access this report, we need this get resolved asap.
Any help is greatly appreciated.Hi,
this is a forum so people will answer questions when they get to it.
if you need help "asap" then I would suggest you open a case with SAP Support
Ingo -
I want to store an xml file into database, and transport it to the XI.
tell me in how many ways we can store a xml file in database.
one i know is.- create a table with field same as that of XML. store XML file data in it
and at the time of transfering data to XI fatch data from table and create an XML file and transfer...
tell me if u know some moreDear Swethi,
You can move images to SAP using SE78. then u can use them where ever u you require them.
SE78->GRAPHICS->BMAP here give ur image name and click on save
Rgds,
Kiran
Edited by: Kiran on Jun 11, 2009 7:15 AM -
SQL Loader problem while loading records from txt file to database table.
I am getting following error while loading records from flat txt file into database table with the help of 'sqlldr' command. I have executed catldr.sql from RDBMS folder but it is still showing same error. I am setting DIRECT = TRUE while issuing sqlldr command. If I try with DIRECT = FALSE then it works fine. Database is Oracle 8i.
SQL*Loader-951: Error calling once/load initialization
ORA-24329: invalid character set identifier
F1 Please.Hello,
Direct path load, can only be used with SQL*Loader and Database have the same version.
Care to tell the database version and sql*loader version you are using.
-Sri -
Open Hub - Change from File to Database table
Hello Experts;
I want to change the Open Hub Service that we create from File to Database table.
We are using the Delta Update. However, after I change the Open Hub, Activate the transformation and DTP, when I run it, I don't have any value in the table.
If I run a new delta into my cube, in the table I only get the data from delta.
Can anyone knows how to upload all the requests that I have in my cube for the first time I run the delta DTP?
Thanks and regards;
RicardoCreate a new Full DTP and execute, so that you can dump all of the current contents of the InfoCube into the table and push/pull that table to the target prior to the next delta retraction.
Edited by: Dennis Scoville on Nov 17, 2009 9:37 AM -
Reading Text file or Database efficiently
Hi.
I have an option to read EMP names randomly from either text file or database . Can anyone tell me which one will be fast. I have to read more than 5000 names dynamically for my application and pick one name randomly.
Many thanks, RaviHi quitte ,
Thanks for replying. I just want to pick names randomly from file or database to name each and every customer in my application dynamically.
For this, I created one table with Unique names and would like to design a code such that each customers will be named dynamically.
Any Suggestions or Advise?
Ravi -
How to extract data from text file to database table
Hi ,
I am trying to upload data in text file to database table using GUI_UPLOAD function .what would be the program for that.
thanks in advance.Hi,
I don't think you have a standard sap program to upload data from file to database table...
Instead you can create a custom program like this..
DATA: T_FILEDATA(1000) OCCURS 0 WITH HEADER LINE.
DATA: T_ZTABLE LIKE ZTABLE OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\TEST.TXT'
tables
data_tab = T_FILEDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FILEDATA.
T_ZTABLE = T_FILEDATA.
APPEND T_ZTABLE.
ENDLOOP.
MODIFY ZTABLE FROM TABLE T_ZTABLE.
COMMIT WORK..
Thanks,
Naren -
Pls tell me how to upload from excel file to database.
hello,experts,
I want to upload data from excel local file to database table created by myself.when I use function
CALL FUNCTION 'GUI_DOWNLOAD'
the data in the internal table just become error code data that can not understand.
who can help me out?
thanks.Hi,
1st copy the values in XLS into internal table by using function Module:-
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = file_name<it is file path of u r XLS>
i_begin_col = 1
i_begin_row = 1
i_end_col = 250
i_end_row = 1
tables
intern = itab<this structure is same like u r database table>
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
if sy-subrc 0.
then modify or insert these values to database from internal table:-
modify <DB table> from itab accepting duplicate keys.
for file popup use :
at selection-scree on <screen field>.
call function 'F4_FILENAME'
exporting
program = sy-cprog
dynnr = sy-dynnr
importing
filename = zfilename.
here zfilename of type rlgrap-filename.
and pass this as path in ASLA_EXCEL_TO_INTERNAL_TABLE
Edited by: vijay Mekala on Dec 29, 2007 12:45 PM
Maybe you are looking for
-
I have old pictures in my external drive that I filled up. I would like to make another iphoto library in a new external drive and have this one for new pictures. Can I do that? And how will I be able to see my old pictures on my older external dri
-
Hi Guys I've filmed a wedding using a Sony Z1 in 16:9 but I have some footage in 4:3 captured by a old little handheld Panasonic GS10. I'd like to use some of that footage but I need to make that 16:3. I saw a thread a couple of days ago that had a g
-
Process chain Activation Variant failed
Dear Gurus In BI7 executed a process chain,in this ods activation is in 4 th step,turned in to red,i repeated and got executed. Questions: 1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible. 2.Even
-
What is a upnp.log??????
Every now and then a file called upnp.log appears in my Hard Disk folder. What is it?
-
I have problem to change the store in i-tunes- i v got some deposit from german store and I want to use my czech credit card in czech store. Is there any chance e.g. erase the deposit (from german store) or somehow change it with the same apple ID? C