Autohide flvplayback controls in full screen mode

Does anyone know how to autohide the playback controls ONLY
in full screen mode? I'd like them to always be visible when
"minimized", but would like them to fade away after entering fsm.
Many thanks in advance

I would like to do just the opposite. It seems that when I
enter Fullscreen mode using the FLVPlayback component the controls
I have created are hidden and the component takes up the full
screen. I would like my controls to remain visible.

Similar Messages

Video playback controls in full-screen mode???

I just downloaded a TV show and want to watch it full screen. Unfortunately, in full-screen mode I can't seem to figure out how to control the playback (e.g. Rewind a few seconds to hear something I missed).
I tried all sorts of keyboard shortcuts to no avail. Am I missing something?

Ba,
It may be of interest to know that streaming video codecs are designed for computers of a specific age (CPU and GPU speeds).
DVD quality streams MPEG-2 compression at about 10 Mbits/sec, and the older MPEG-1 compression, designed for NTSC television, streams at about 2 Mbits/sec. At 10 Mbits/sec, the processor must work faster to decompress & display the image. The latest compressions are based on MPEG-4. Even a G3 iBook could display MPEG-4 full screen; so I don't think you need a faster GPU.
Microsoft codecs & containers, the last time I checked, were ancient: based upon MPEG-2. So, check your speed:
DSL Reports speed tests
http://www.dslreports.com/stest
If you use Wi-Fi, IEEE 802.11n is fastest.
Increase the cache size for your codec, if you can. It needs to be contiguous, so I dare to recommend iDefrag 2 (US$30) to clean your remaining disk space and obtain about 20 GB of contiguous space. Video display uses many operating system files, which are likely not fragmented; but you can also de-fragment the Windows codec if it lies in over 100 fragments. (The Spotlight database usually has over 1000 fragments; but pauses in it don't affect one's pleasure in using it.)
My low-resolution DVD is interpolated by my graphics card, and look beautiful at maximal resolution. Streaming graphics apparently isn't programmed to interpolate low resolution: it demands high resolution and high bandwidth.
If you can't increase the cache in WMP, you can lower the resolution of your monitor. That may be why this System Preference was designed to sit on the desktop's top bar.
Bruce

How do I get controls in full screen mode?

In HD, in full screen, the screen goes off the monitor and I can't grab controls. anyone know solution? thanks.

thanks Tom, well you are right, but because so much of Final Cut footage is played back in QT I almost think of it as an an appendage of the program. I can repost this, but do you know the answer?

I need to remove "minimize, maximize, close" buttons on full screen mode

I can remove all buttons (like refresh, back, forward, address bar, etc..) but the little right 3 buttons "minimize, maximize, close" i cant remove, how can i make with userChrome.css or other option.
Because i can close firefox exiting from fullscreen and clicking on archive menu with "Alt" key.
I dont wanna this little 3 buttons, that i can hide and show permanent.
I hope explain me correctly
Thanks a lot

Add code to userChrome.css below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#autohide-context { display:none!important; } /* hide context menuitem "Exit Full Screen Mode" */
#window-controls { display:none!important; } /* hide window controls in full screen mode */
</nowiki></pre>

WebBrowser Control - Full Screen mode detection

Hi there,
I know that this is not the right place to ask, I read this also "Where to post your
VB 6 questions", sorry about that... :(
I already posted my question on VBForum, DreamInCode and StackOverflow about 1 months ago, but no one answered to my question.
I'm trying to detect full screen mode with WebBrowser Control in VB6...
When the video is loaded into WebBrowser Control and you Double click on video then it's goes Full screen mode and if you Double click again it goes back to normal view mode.
Loading the Html file and Navigate:
Code:
WebBrowser1.Navigate App.Path & "\example.htm"
Here is the htm file called "example.htm" to load into WebBrowser Control:
Code:
<html><body topmargin="0" leftmargin="0" scroll="no"> <iframe width="640" height="385" src="http://www.youtube.com/embed/xtYIEBOQ1eQ?rel=0&autoplay=1" allowfullscreen="true" menu="false" frameborder="0"></iframe></body></html>
Now I wish to detect those events!
p.s. I already tried to use:
Private Sub WebBrowser1_OnFullScreen(ByVal FullScreen As Boolean)
Form1.Caption = CStr(FullScreen)
End Sub
But, it's nothing to do with Full screen what I'm trying to achieve.
(Also tried the Microsoft HTML Object Library, but nothing there useful)
Can someone help me out?
Kind regards

Hi there,
I know that this is not the right place to ask, I read this also "Where to post your
VB 6 questions", sorry about that... :(
I already posted my question on VBForum, DreamInCode and StackOverflow about 1 months ago, but no one answered to my question.
I'm trying to detect full screen mode with WebBrowser Control in VB6...
Hi,
I am afraid that as you read the thread
Where to post your VB 6 questions, VB6 is not supported by these forums any more.
I would recommend you focus on the threads you have posted in the other forums, and perhaps
VB City forum could help you.
Sorry for any inconvenience and thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How To Make Screen Controls Disappear In Full Screen Mode?

I downloaded Quicktime 7.2 and even though I have selected Edit/Preferences/Player Preferences/Full Screen and under Controls, Display Full Controls, Hide after 2 seconds -
When I am watching a video in full screen mode, for example the latest Keynote Address by Steve Jobs, the control panel which accesses Stop/Pause/Fast Forward etc., does not disappear regardless of how long I wait. Additionally the mouse pointer does not disappear either.
I have to move the mouse pointer off the screen and/or move the Control Panel all the way down out of the way for it not to be visible.
If I Deselect the "Display Full Screen Controls", then of course the controls do not appear, however the mouse still stays on the screen in full screen mode.
How do I correct this. The Windows Media Player functions perfectly when I watch movies in full screen - controls disappear and so does the mouse. If I move the mouse, they reappear then disappear again after a few seconds.
Any advice in correcting this would be appreciated.
Thanks!

Yes, this is annoying, however I'm glad you 2 guys finally posted. This is what I've found out so far. If you delete the .plst file (do a search for for it), it appear that it will be recreated again by Quicktime. That cured the problem with the Control Panel disappearing after the preset time set in preferences. However, the pointer will not disappear. I tried to uninstal and reinstall and also view different movies, but it will not disappear.
So give that a shot and see if that resolves 50% of the problem. In Media Player, the control panel and pointer disappear in Full Screen mode. In Quicktime there seems to be a quirk. I've searched on this forum, but have not been able to find any other threads that indicatd a resolution to this issue. So let's hope that someone does or that Apple figures out the problem and issues an updated version for this.
There was a new update that I received over the past few days and I was hoping this would resolve this issue, but it didn't.
I've also read here that going to Windows Safe Mode and activating QT, watching a movie, then going back to normal mode fixes some issues. I've tried that too, but the pointer just will not disappear.
I've tried disabling the Control Panel and then it won't appear at all, but the mouse pointer always does and the only way is to move it physically off the screen. When you move it the Control Panel will appear for a few seconds, then disappear again.
Try these things out and comment on what you discover.

How to lock bottom control bar from auto-hiding in full screen mode

I am using Flash Player with ie in Win7. It is very irritating while watching YouTube videos for the status/control lbar to keep auto-hiding. When the bar auto-hides, the pause/play position becomes the progress bar position - and a click where Pause used to be resets the video to start. How can I keep the bottom control bar from auto-hiding in full screen mode?
Thank you, Steve [email: [email protected]]

There's nothing you can do to Flash Player, itself, to prevent this from happening. Apparently, there's no way to disable via youtube, or google, either -- http://productforums.google.com/forum/#!topic/youtube/_E5yFvNJCPk
You SHOULD be able to call up the bar by hovering the cursor at the bottom of the screen and then, after a a second or two, click on the pause button. (It shouldn't restart the video in other words.) But, if for whatever reason, this doesn't work, just click once in the center of the screen to pause the video. To restart, click the center of the screen again.
HTH,
OF

Keep the editing controls at top + bottom when in full screen mode??

hey all,
so... is there a way anyone knows of to keep the editing controls at the top and bottom when in full screen mode? i know they slide away so i can see the whole image, but what if i don't want to?!
thanks!
20 2GHz iMac G5; 15 1.5GHz Powerbook; Airport Express; Wacom Intuos 3; Motorola RAZR Mac OS X (10.4.2)

never mind, just figured it out, duh. o, um, go to the top, the menu bar will appear, under View, click on Show Toolbar.
Cheers!

Not able to get the minimize maximized and close button and its running with full screen mode.

Hi
My Thunderbird is running with ubuntu OS and while using some shortcut key my thunderbird mailbox switched to full screen mode. now i am not able to resize it's view and also not able to see minimize, maximize and close buttons on top left corner.
Please help me out.
Thanks

I'm also running Ubuntu. Not sure how you got there, but you can try a Control-Q to quit. Then restart it and hope in comes back normal.

Please help: Linking from PDF to other PDF's that open in a new window... but NOT in full screen mode!?

Hi All,
I have a project where a PDF is viewed in full screen mode when opened, from within this I wish to link to a variety of other PDF's.
Creating the links is simple, however I can not work out how to control the new window so that the new PDF opens with the toolbars and menus, ie not in full screen mode.
Any help would be apreciated, google is not my friend on this one.
LB.

Hi Thanks for the response.
I thought I had, but what seemed to be happening was that the Linked PDF was
adopting the full screen property of the original PDF. I'll give it another
go and let you know.
LB
2009/5/10 Steve Hart <[email protected]>
Have you tried setting the initiall view properties of those PDFs to what
you want? Go File>Properties>Initial View.
>

When I go into full screen mode in Safari 5.1 on LION it switches to a new Space, making my other displays useless. Anyone else annoyed that Apple has completely left out those with multiple displays?

I had a fear that this was going to be the case, but you can't have two full screen apps open in two different displays. At least that's how Safari fullscreen works. When switching over to full screen mode in safari, it automatically creats a new space, turns on four finger gesture to swipe through full screen apps which I had turned off in place of App Switcher.
I don't use spaces because of the lack of support for using spaces with multiple displays. I would use spaces and mission control if I had control of each display's mission control separately.
The fix would be to unlink the displays so they can scroll through full screen apps by themselves. I want this feature so I can mix and match the full screen apps on my three different displays. I see this beneficial for more people with multiple displays. in the future when thunderbolt display links, people will want better support too.
I know I would use spaces and mission control more if I could have this ability. I'd be interested to know people's opinion.

No no, if you read what I said, it would be that each individual display would be customizable to the user. The way you have it, it sounds like your second display will be dedicated to scrolling through fullscreen apps not allowing you to do it on the home screen. This is silly because with my concept, you could do that, by dragging apps to fullscreen in your second display, but if you want you could tell another display to scroll through fullscreen apps (independently) if you wanted. Each display will have it's own mission control with it's own set of desktops. I also can see how some people would still want them linked together, so this could just be a little check box made in mission control prefs to "link" or "unlink" desktops with link checked by default.
With your solution you're limited to your setup. but what if the person has three or four displays? Well then your solution would limit them to one dedicated display that scrolls through fullscreen apps where mine lets a person customize their desktops depending on their preference and setup.
further example: if you have safari, address book and mail in one display, you could still have ichat, PS and Illustrator in your second, and a text editor, FTP Client and iTunes in your third. Then you would mix and match these apps but it would promote the use of mulitple displays as well as benefit people with three or more, which thunderbolt, Cinema Display and Pro computers support.

How to exit full screen mode mail message

Inexplicably, when i open messages in Mail, they appear in something like full screen mode. The message viewer window is not in full screen mode, but if i open any message, the message takes up the whole screen. I can drag the message in order to see other things on the desktop, but i can't adjust the size of the window to the size i want, and see no way of exiting full screen mode. I lookd in Help, but it only shows how to enter Full Screen, not how to exit it.
In the View menu, there is an option to enter full screen. When i have the full screen sized message open on top, the enter full screen option in the View menu is greyed out. If i have the normal sized window for the message viewer window on top, the enter full screen is not grayed out and could be selected. I do not select it since there appears to be no 'exit full screen' option that i can see and i don't want to multiply this problem.
I know this might be a silly question, but if they have an enter full screen option, why wouldn't they also have an exit full screen option?
Or is there an exit full screen option which exists somewhere that i have not been able to find? I've searched Apple Discussions and Google but so far have not found a way to un-full screen my Mail messages. This started this morning.
Can anyone help?
I do not know how it got into full screen mode. It was not something i did deliberately or knowingly.
i have tried quitting and restarting Mail but the full screen message mode returns.
How can i get my mail messages out of this very annoying and awkward screen hogging mode?
I have only been using Mail since last November when i got a new MBP with Mountain Lion, which meant that for the first time since 1995, i could not use the simple straightforward faultless Eudroa anymore. So i have had my struggles with Mail. Trying to get through it. This is the most recent of various similar issues, inexplicable problems without apparent solutions. Sort of Microsoft-like.
I will be really grateful for any help.. thanks

Press Control + Command + F on your keyboard to enter or exit full screen mode.

Full screen mode bug in Safari?

In Safari, running in full screen mode, if a link opens a file (eg an Excel workbook), sometimes the Excel (non full screen) window will open over the top of the Safari full screen window. When that happens it's impossible to get access to the Excel window, as clicking on it will jump to the desktop "space" (where the window should have opened?). The only way out of the problem is to move to the Safari full screen "space" and take Safari out of full screen mode using the button in the top right corner (Esc doesn't work in this case). After that I can access both Safari and the Excel window no problem.
This doesn't always happen, but it has happened enough times to be annoying, and also happens with other apps (eg Preview), not just Excel.
Anyone else had the same problem?

It is a bug. If you start to search for something with the Safari not in full screen mode the history and predictive search functionality is there. If you then expand the application window to full screen it the search field will continue to work as expected. However, if you open the application and first expand it to full screen view before using the search field it will not work properly; the history will be inaccessable and the predictive search will fail. In order to restore functionality, hit 'control+command+F' to return to non-full-screen mode, type something in the search field or access your search history via the hour glass and then return to full screnn mode. The search field will now function normally again. This is definitely a bug and this behavior explains why the search seems to be fixed at times, and broken at others.

ScreenSaver coming on when in Full Screen Mode

Hi Guys,
My father-in-Law got the Quicktime pro 7 for windows, I still haven't been able to get him to buy a mac... but that's another story. When we installed the software on his laptop, everything works fine, but when watching an .mp4 file, we noticed that along the way every 15 mins the screensaver would take over the screen, we where watching in full screen mode, this of course it not right cause in my Mac, no screensaver takes control away from quicktime in full screen mode. We had to reset the screensaver to never for us to watch the .mp4 file.... please fix this in the next windows update. Or let's us know what settings to use for this not to happen. Thanks

Most screen savers allow the user to set the "time" when they start.
Set the delay longer than the QuickTime file.
Send to "Feedback" to request changes in the software. This one bugs me at times, too.

My safari window is disappearing in non full screen mode OSX Lion

Hi Guys,
I seem to have the following problem. not sure exactly how it started as my wife was using the mac at the time (she says she just dragged the safari to different desktop via mission control) but now the situation is as follows:
When I hit safari icon it switches on (I can see the little light dot underneath the icon and after right click I can see names of windows that are opened) however I can only see the Safari menu at the top but no window. If I scroll to the right or left to different desktops it's not there, the same goes if I double tap to see the Mission Control mode it's not there...
I so far figured out that once the Safari menu is visible on top of the screen I can go to View>Enter Full Screen and then Safari will come back into the full screen mode but once I unclick the full screen button in right top corner the whole window just swoops into the right top corner and it's nowhere to be found again.
I have rebooted and it's still the same - I can only get the full screen mode or none. it's very weird. Anyone's got any suggestions?

Thank you,
That's not it - Hot corners are not active, it's more like when you normally click the full screen on/off button (the two arrows facing each other) the transition happens with gray apple background and it moves either to or from full screen but here the background comes on and the window just goes into the corner and it's gone. Then when in Safari menu I go View>Enter Full Screen the window comes back exactly the same way: from top right corner into the whole screen.
Like I can only use Safai in Full Screen mode..

Autohide flvplayback controls in full screen mode

Similar Messages

Maybe you are looking for