Automate cisco configuration

I want to automate copy custom backup configuration (custom-confg) to running-config at a reccuring date

You can use Archive command. We are using following lines to get our router backup to our FTP server.
archive   
 path ftp://username:password@IP/URL

Similar Messages

  • How can I automate switch configuration

    I am looking for a way to automate switch configurations. I want to create a standard configuration that I can apply to all new switches. What methods (software, scripts etc) are available to automate the configuration process? Ideally, the system would download and install a standard image and then apply a baseline config, which I could modify as needed after initial install.
    Thanks

    Sorry, this is correct URL - http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca735.html
    Also search Cisco website for release notes for your specific product since there might be some differences in supported features (like auto save of configuration after auto-install finished etc.). Here is one of them:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5013/prod_bulletin0900aecd803fdc15.html
    Regards,
    iLya

  • Can't launch Cisco Configuration Professional on Windows Vista x64

    The Help is necessary to resole the issue (see subject).
    Tech enveronment
    Windows Vista x64
    Adobe Reader X ver. 10.1.0 (Russian)
    Cisco Configuration Professional 2.5
    JRE 6 update 27
    JRE 6 update 27 (64-bit)
    Internet Explorer 9.0.8112.16421IS
    While launch CCP popup the message box :
    "Unable to read the resource file. The file could be corrupted. Please re-install Cisco Configuration Professional to resolve the issue."
    Ones (never popup after) Popup the message box (InstallShield Wizard):
    Adode Reader is not present on the PC. It is required to view the PDF file.
    Also the message box InstallShield Wizard:
    Internet Explorer with javaplug-in version 1.6.0_11   Cheked
    Adobe Flash Player version 10                              Cheked
    Memory 1 Gb                                                      Cheked
    Screen Resolution 1024x768                                Cheked
    Cuted _cpinstaller_004.log file:
    Product : Cisco Configuration Professional version 1.0
    10-4-2011 16:48:31 LOG   : Command line options =
    10-4-2011 16:48:31 LOG   : GetOS: OS Windows Vista
    10-4-2011 16:48:31 LOG   : GetOSServicePack: service pack 2
    10-4-2011 16:48:31 LOG   : GetIEVersion: IE version 9.0.8112.16421
    10-4-2011 16:52:51 LOG   : CheckCCPPorts: WARNING 80 is not a registered HTTP port
    10-4-2011 16:53:27 ERROR : SetRunAsAdmin: ERROR REG_APP_COMBAT_LAYERS_ROOT could not be created.
    10-4-2011 16:53:46 LOG   : GetJavaIEPluginVersion: java IE plugin version 1.6.0_27
    10-4-2011 16:53:47 LOG   : GetFlashPlayerVersion: flash player version 10
    10-4-2011 16:53:47 LOG   : GetScreenResolution: screen resolution 8
    10-4-2011 16:54:14 LOG   : OpenPDFFile: Adobe reader could not be found on system.
    10-4-2011 16:56:17 LOG   : OnEnd: installation successfully completed.

    Hi,ngoldwat!
    Yes, off cource, I've tried to launch CCP with Administartor rights - no success.
    I have re-installed CCP under Local Admin and launched it. Great!!! It works! But, one of but, the app does not launch from domain user while I use Run as Administrator. I think the issue in the permission and/or user's profile.
    Thanks ngoldwat! You have helped me.

  • Automatic Proxy Configuration URL doesn't work on some computers, but Manual proxy can work

    It seems that the Automatic Proxy Configuration URL doesn't work, I use the command netstat -a, can't see the connection to proxy server, but manual proxy is ok, and I tested on some others computers, most of these computers can work normally with Automatic Proxy Configuration URL.
    For the computer can't work normally with Automatic Proxy Configuration URL, I did below actions
    1.Clear the cache
    2.update the version of firefox
    3.reinstall the firefox
    4.use the safemode to run firefox
    but unfortunately, still doesn't work.
    Can some dear friends give me a big favor for this? Thanks a million in advance!

    I have the same problem, just showed up recently - very fricking annoying!!

  • Bypass automatic proxy configuration for some websites?

    Here's my problem, perhaps someone can help:
    I occassionally need to use my university's proxy server to access library materials, etc., through my off-campus connection. So I entered the .pac file (a url) in the Automatic Proxy Configuration box of System Preferences > Network. All well and good.
    The problem is, when I want to get more weather details from the weather widget for example, visiting a site like Accuweather.com throws up the login page for my proxy server. Having to enter my university id and password whenever I want to check the weather is guaranteed to drive me bananas.
    So is there any way to keep sites like Accuweather.com from demanding I log into my proxy server when there's no reason to, while still keeping my auto proxy configuration in place for when I really need to use it? Anything I can do in Safari about this?
    The other option seems to be to reserve one browser, configured with my university proxy, just for doing library research, etc., and another as a general surfing browser. I'd be happy to make Safari do general duty, and configure Camino to use the proxy server, but I can't seem to make this division work, since both use whatever's listed in Network Prefs. I can't tell one to use the proxy and the other not to, they're both controlled by this global pref.
    I think I might be able to specify the proxy locally in Firefox, and leave Safari w/o the proxy...But I much prefer the look and feel of Camino...
    Any ideas on how to get around this with Safari, or a combo of Safari and Camino?
    Thanks in advance for any tips.
    iBook G4 800Mhz 12"   Mac OS X (10.4.4)   Safari 2.0.3, Camino 1.0

    Okay, I found the "Bypass proxy settings for these Hosts & Domains" box right under my nose, in Network Prefs. It's explained in this kbase document,
    http://docs.info.apple.com/article.html?artnum=301534
    Getting closer...
    However, using the accuweather.com example, I tried entering the domain name and it still calls up the login in Safari. I even tried looking up the site's IP address and entering that in different forms:
    wwwa.accuweather.com
    207.242.93.24
    207.242.93.*
    Still no luck, it calls up the proxy server...

  • Could you tell me the automatic clearing configuration

    I want to know the automatic clearing configuration.i have seen f.13, in that i have executed , but  i am unable to understand the importance and its configuration for GL,AP,AR AND ASSET ACCOUNTING.
    please help
    thank you for your valuable time

    F.13 clears open items lying in the GL/AP/AR etc based on some pre defined conditions. for example.. if you have raised one invoice for Rs 100 and received payment for Rs100.00 In this case, you will have two open line items in the customer account.
    Based on three identical information in both open line items.. customer code, amount and invoice number, F.13 make these open itmes as cleared items.
    OB74 suggest you where exactly you will be putting your input( Invoice number in this case), you can use assignement field, or reference filed or so on(GL Account and Amount is default). You can sensitise this prgramm by giving more filters like other than these three, business area also should match then provide this in OB74 in criteria as GSBER.
    Hope things are clear..
    Regards
    RKG

  • Automatic Proxy Configuration keeps getting disabled for Manual Proxy Configuration

    When ever I launch Firefox 3.6.13, the connection settings get reset to Manual Proxy Configuration. I switch the connection settings to automatic proxy configuration and all works fine. Upon closing and re-launching Firefox the Connection Setting is set back to manual proxy configuration.

    See http://kb.mozillazine.org/Preferences_not_saved

  • What would be the command to uncheck Automatic Proxy Configuration?

    Looking for a script to uncheck the Automatic Proxy Configuration field so I don't have to touch every mac individually.
    I tried networksetup -setsocksfirewallproxystate Ethernet off which ran successfully but doesn't appear to have done anything.

    Figured it out networksetup -setautoproxystate Ethernet off

  • Automatic posting configuration for GR/IR account

    Dear Alll,
    I need some clarification on Automatic posting configuration for GR/IR account. In OBYP, for transaction BNG-Invoiced but not yet delivered we maintain GR/IR clearing account, adjustment account and target account. As per my understanding, adjustment accounts and target accounts are only hit during closing time when GR/IR account has some value and that time it is checked using the transaction F.19 and the amount is posted to adjustment account and target account. Please point out where I'm wrong and provide explanation if I'm loosing on some point
    Warm Regards
    Mazdul

    Hi Jud
    You should make these posting to a cost center then..The only way you can control account postings via PO type is having a account assignement category. You can make this as mandatory filed for this PO type..
    Please let me know if your requirement is different..
    CHeers
    R K Bolla

  • Setting up Easy VPN in Cisco Configuration Professional, external access problems!

    Hi
    I have a Cisco 857 router which is flashed with Cisco Configuration Express 2.6.
    Cisco Configuration Professional 2.6 is installed on my PC and I'm trying to configure Easy VPN for access away from the office.
    The steps I have taken are as follows:
    1) I launched the Easy VPN Server Wizard
    2) IP address of Virtual Tunnel Interface is unnumbered to Vlan1 from the drop down menu - Authentication, Pre Shared Key
    3) IKE Proposals set to the default option thats already there
    4) Transform set is the default which is already there
    5) Method list for group policy Lookup is LOCAL
    6) User authentication is LOCAL ONLY, the admin account shows up in ADD USER CREDENTIALS which is the account i'm going to test the connection with
    7) I have set up a GROUP POLICY which i've named, created a PRE SHARED KEY, created an IP address pool & subnet mask to the same range as the routers addresses and left all other options to default
    8) I left cTCP unticked and disabled
    9) I delivered the commands succesfully
    10) I click TEST VPN SERVER and get 3 ticks successful for Server configuration, dependant components & Firewall
    11) I open the cisco client and access the VPN internally using the routers LAN address, it prompts for my user name and password, I type it in and connect successfully
    12) When I go home I configure my client to the same settings except I change the LAN address for the external WAN ip address, but I get an error message which says "Secure VPN Connection terminated locally by the client. Reason 412: The remote peer is no longer responding"
    VPN Client settings are as follows
    Group Authentication
    Enable Transparent Tunneling- IPSec over UDP (NAT / PAT)
    Currently I have a dynamic external IP address, I intend to get a static one once I know I can get this to work.
    I would be extremely greatful if someone could help me solve this issue and work out why I can't connect externally.
    I have no knowledge of CLI but will use it if given some instructions.
    Thanks.
    P.S. I have turned off all antivirus and firewall programs on the client computer when trying to connect.

    Your nat exemption acl is backwards...
    access-list 101 permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
    should be...
    access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  • Configure SG500X using Cisco Configuration Assistant (CCA)

    Hi,
    I have a couple of SG500X Switches which need to be configured and I wanted to do this with a central managed tool to have an uncomplicated way to configure the switches.
    I already found Cisco Configuration Assistant, which supports the 200 and 300 Series but does not seem to support 500 Series. Also I found the Cisco Network Assistant which only supports Catalyst Switches.
    Is there a tool which can be used to centrally configure and manage SG500X switches?
    Thanks in advance,
    Christoph

    push
    Is there really no tool for the 500 Series?
    Seems strange to me, as 300 and lower have the CCA and Catalyst have CNA, only the 500 don't have any tool.

  • Automatic Proxy Configuration - FindProxyForURL

    The plug-in documentation states, "There are a number of JavaScript helper functions which can be called from the JavaScript function FindProxyForURL. Java Plug-in provides its own implementation of these functions to completely emulate the automatic proxy configuration."
    Does the Java Plug-in implement the dnsDomainIs helper function? I ask because the proxy.pac that I use has something like this:
    if (
    dnsDomainIs(host,"intranet.domain.com")
    return "DIRECT";
    When the Java Plug-in tries to connect to a particular host that is in our intranet (ex. host1.intranet.domain.com) I get a proxy server login prompt. However, if I use:
    if ( shExpMatch(host, "*.asco.ashland.com") )
    return "DIRECT";
    I do NOT get a proxy server login.
    Any thoughts?

    The plug-in documentation states, "There are a number of JavaScript helper functions which can be called from the JavaScript function FindProxyForURL. Java Plug-in provides its own implementation of these functions to completely emulate the automatic proxy configuration."
    Does the Java Plug-in implement the dnsDomainIs helper function? I ask because the proxy.pac that I use has something like this:
    if (
    dnsDomainIs(host,"intranet.domain.com")
    return "DIRECT";
    When the Java Plug-in tries to connect to a particular host that is in our intranet (ex. host1.intranet.domain.com) I get a proxy server login prompt. However, if I use:
    if ( shExpMatch(host, "*.intranet.domain.com") )
    return "DIRECT";
    I do NOT get a proxy server login.
    Any thoughts?

  • ISM-SRE-300-K9 & Cisco Configuration Professional Issue

    hi there,
    i have a cisco 2901 router running CME 8.6 the router has a ISM-SRE-300-K9 card init with Unity Express 8.0.5 installed.
    i am having issues with Cisco configuration professional and configuring the module
    under module configuration the status is "module is not reachable", if i click on details i get further information "unable to execute command from the module. module is either reloading or is in failed state. you must make the module up and refresh the module"
    i have tried reloading, resetting and refreshing the module but the issue is still present
    i have accessed the module from the CLI set it in offline mode and factory defaulted it and the same issue is still present
    the only thing i can think is that this is a bug with CCP as the loopback interface which the module is using can be pinged fine from the router so the message makes no sense.
    any ideas

    Is you problem with CCP or the module itself ?
    Because, CCP bugs and limitations aside, the module can be normally be installed, configured and managed using CLI or its web interface (after software is initially loaded).

  • Does Safari support Automatic Proxy Configuration with a .wpad file?

    Hello,
    I was wondering if anyone knows whether Safari supports Automatic Proxy Configuration with a .wpad file?
    Morgan

    HI Morgan ..
    Safari is extremely finicky about proxies and according to Wikipedia it dates back to older browser versions.
    http://en.wikipedia.org/wiki/Web_Proxy_Autodiscovery_Protocol

  • Can Cisco Configuration Professional to use IPS feature ?

    Dear Expert
    Hello.
    Could you tell me about Cisco Configuration Professional.
    I'd like to try the IOS-IPS on Cisco2901-SEC/K9.
    I was search in CCO about Cisco Configuration Professional.
    The Cisco2901-SEC/K9 does not support SDM.
    But, The Cisco2901-SEC/K9 supported the Cisco Configuration Professional.
    Can Cisco Configuration Professional to use IPS feature like SDM?
    Regards,
    Takuro.

    Hi,
    yes, you can configure IOS IPS from Cisco Configuration Professional.
    CCP has a wizard to guide you through the process, this is a link for that :
    http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6634/prod_white_paper0900aecd8066d265.html
    i hope this helps you.
    Mashal

Maybe you are looking for

  • Transaction behavior changed with change in Windows to Linux Environment

    Hi All, I am facing a very weird problem. I have a 2 BPEL Synchronous Services lets say A & B. A calls B in its flow and B inserts a row into database and then retrieves the inserted row (as the primary key is sequence generated through a Trigger). T

  • Hyperlink error : on Exporting crystal report to Editable RTF format

    Hi , In my crystal report I have hyperlink which works normally. Now when I export this report to Editable RTF format; the hyperlink gives error "Error! Hyperlink reference not valid. " It works for other formats. Please help

  • How to re-upload images in LR that were lost due to crash

    I edited a series of photographs in LR and the original files were on a flash drive (big mistake, I know). Well, my flash drive crashed and I lost the edited photos. I tried to go into LR to re-upload the files (because I have my SD card with the ori

  • Personalization of WD ABAP iViews

    Hi, Some of the ESS travel applications are WD ABAP based and we can personalize the UI on the browser. However, when we do the personalization, it doesn't ask to create any transport request. How do we normally transport the personalization changes

  • How can I access the metadata templates?

    I would like to use metadata templates in Photoshop CC 2014.2.2 from the File > File Info... menu option. When I click on Import in the Template drop-down menu at the bottom, the file browser comes up with the Metadata Templates folder selected but I