Automate Data Manager - for particular infocube in BW

Experts,
How to run process chain /CPMB/LOAD_INFOPROVIDER in the RSPC and hard code it to certain Infocube in BW.
OR
is there a process type which loads data from BW cube to BPC cube using data manager and NOT switching the cubes?
I see that we can use program UJD_TEST_PACKAGE to automate ,but my DM is not running.
I gave the answer prompts below ,can u please let me know if it is correct or the right syntax and method ?
also does the userid need to be SYSTEM userid ?
%InforProvide%     ZCUBENAME
%TRANSFORMATION%     \ROOT\WEBFOLDERS\APPSET\APPLICATION\DATAMANAGER\TRANSFORMATIONFILES\Load BW data.xls
%CLEARDATA%     0
%RUNLOGIC%     0
%CHECKLCK%     0
EHP 1 for SAP NetWeaver 7.0
CPMBPC 7.5 LEVEL 8
Thanks
Thanks

Hi,
Create a package link .While defining the package link you can make cube name as set prompt.
Sorry...my understanding is wrong!
Hope it helps...
regards,
Raju
Edited by: VaraPrasadraju Potturi on Nov 11, 2011 9:06 AM

Similar Messages

Error:Unable to determine data basis for virtual InfoCube.

Hi all,
 I am working on Virtual cubes. I have created a query on virtual cube which is getting loaded from a transaction cube. I am using a transaction cube which is a copy of standard cube 0BCS_C10 - Consolidation (Company/Profit Center). (Transaction cube).
When I execute the query in BEX it is disconnecting from the server and if I execute the same in transaction RSRT it is showing following errors.
1.Unable to determine data basis for virtual InfoCube.
2.Error reading the data of InfoProvider.
3.System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Will be thankful for suggestions.

Hi Pankesh,
Thanks for the response..
 Transaction cube contains data and characteristics of virtual cube are consistent.
 I am trying to see the contents of the virtual cube in transaction LISTCUBE, there also its showing same errors.
How can I proceed now?

How I can do data management for classification ?

Hi
How I can do data management for classification.
If I have new class and I want to add this class to a lot of materials, how can I do that? Is there a transaction to add and also to manage the data in the classification by mass?
Vijay

CLMM is the transaction for mass maintenance.
there you click set an change values button
you enter your class type.
in assingments tab you enter the new class
in target objs to enter the material number that need to get this new class assigned. (you can search the materials with the class they have currently and adopt the hits)

Automatic billing off for particular distribution channel

Hi Experts,
please tell me how I can automatic billing off for a particular distribution channel
Thanks in advance

Scheduling SDBILLDL is exactly like scheduling any ABAP report - it is an ABAP report. Any ABAPper in your team should be able to help. You need to create a variant for your sales org/distribution channel and schedule this report to run periodically.
Since you will be running this periodically, the billing date field should dynamically change for every run. Again a competent ABAPper should be able to help you setup a variant such that the date automaticaly changes for each run. This is accomplished by use of selection variables

Automatic batch management for Production order receipt

Hello ,
I have a requirement to setup & activate Batch Management only for Production order Good Receipt . I am looking out for what all configuration / data setup will be required to complete this .
To start with I have following questions .
1. Whether such activation is possible only for Production order Good receipt - 101 mov.type
2. IF yes , is Batch management activation status be at material or plant level .
3. As I need automatic assignment , should I be selecting Internal batch management .
4. What should be selected for valuation for Goods movement in Inventory management.
5. Is it necessary to have batch determination by maintaining Condition tables / Access sequence
6. What would be standard Class / characteristics to be maintained for automatic determination.
Also I will have to work with the running system where Material are already active and have stock in system . What precautions will I have take if I have to activate the Batch Management in a running system.
Appreciate all your expert advise.
Regards,
Lawrei

Thanks Adler for your comments .
With reference to your point , need further clarifications
1. If batch management is selected to material , this means that it will be active for all movement types for Inventory and cannot be restricted to 101 mov.type .
I see that in config node
+Define Batch Creation for Goods Movements+
    +Using this function, you can define for each movement type whether a new+
    +batch is created for a goods receipt and how it is created.+
Can I not restrict batch creation only for 101 movement , but again here I don't have options to select only for Good receipt for order - Tran/Ev type - WF .
& what about below config node
+Define Batch Creation for Production Order / Process Order+
    +In this step you can make the following settings in batch management for+
    +the existing production control profiles:+
Is it possible in this node .
Please advise.
Regards.
Lawrei

System and Query field disable in Data Manager for Netweaver BI

Dear All.
i have installed Xcelsius Engage Server 2008, when i try to add connection for SAP Netweaver BI from the Data Manager the dialog appears correctly but in Defination TAB only the Name field is enable both System and Query field is disable.
without that how can i configure the connection please let me know how to fix this issue.
Kind regards,

Hi,
You give the name of the connection and then click on "Browse". It will then prompt you to connect to the desired system. Log in and then select the appropriate query you want to build a dashboard on.
Hope this helps.
Regards,
RashmiG

Enabling data management for a coldfusion data service

Hello,
i have problem in calling a service withen a data service ,, that if i enable the data management i cant insert or update records , if i desable the data manabemt i can insert records but dont have result for get all or any get service all . it was working befor now no i completly remove the data service and created it again but the same problem even i deleted the valueobject and all the actionscript file related to that data service i have the same problem.
but
if i call the create record function ,, then i try to get the record i get the resutl from the database ?!!!
can someone help please

I saw the tutorial but that doesn't actually show how to configure for POST - it just uses GET and DELETE. When you configure for POST, you get prompted to "Specify an XSD that describes the structure of the request content". That implies that it is going to send the service an XML file as the attachment and wants to know the format of the XML file. The service that I want to use doesn't expect to receive an XML file, it expects form fields, and I think HTML forms send these like this:
p_zip_code=22209
p_selection=a
p_selection=b
p_selection=cOf course, the correct answer to my question may be "You can't get there from here" at least until 12c.
Ah ha! I see that some of what Frank mentioned is in the newly released 11.1.2.2, and didn't wait for 12c. I'll give that a try.
Edited by: jflack on May 11, 2012 2:58 PM

Exclude budget update in Funds Management for particular FI document type

HI FM gurus !!
We have an issue in FM .We do the service entry for Transporters for the whole years charges at one time . ( for some reason it cant be done for the month) So we have to pass the FI entry for the Prepaid Expenses. But when we do this entry in FI corresponding effect goes in FM and the Budget for this committment item gets INCREASED. THIS WE DONT WANT since this temperorily available budget may get used for other things. This is the background .
so All we would like to do is to prevent the budget update in FM for this Prepaid entry. How can we do this ? is there any config or BADI ?
PLEASE ADVICE

Its been resolved..
For budget not being available for consumption after being posted through FMBB th issue was in my AVC profile. and for the second part where budget was not consumed after invoice being posted through FB60 the issue was in my fiscal yeas variant year shift. the posting was taking plane in the wrong fiscal yeas hence consuming budget for that particular fiscal year and not of the year i intended to post to. Thank you so much fpr approving my query
Regards,

SSIS - pass variables to Data Manager for Appset and Application name

Hi folks,
I'm building an SSIS package, and I can't work out how to set the Appset and Application names in the Convert Task item - I have created the item, and the variables, but I can't work out how to reference the two.
Any tips or help greatly appreciated - this is one of the worst-documented pieces of software I've ever seen!
Thanks,
Jason

Hi,
Please refer to the other SSIS packages already created. We need not set these parameters while creating the SSIS package. When we link the SSIS to DM package, we can dynamically send the appset name and the application names.
Hope this helps.

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Searching attibutes in the record mode in Data Manager

Hi,
If i create a new attribute in taxonomy mode,i cannot view it in the corresponding search in the record mode in Data Manager.The particular attribute which i have added is not getting displayed in the attributes in the search pane.If i have to search for that attribute in the record mode what should i do.
Thanks and Regards,
Preethi

hi Preethi,
there are a few differencies between fields and attributres
have a look at table:
Tab. 1 Comparison Fields vs. Attributes
from this document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
for search options based on attributes have a look at the bottom
of the table I mention
hope this will clarify a little bit
Regards,
michal

BPFs and Data manager

In Version 7.5M I found some new steps when creating a BPF step for Data Manager.
- Data Manager for PackageExecute
- Run specific package for PackageExecute
- Run user package for PackageExecute
can anyone explain me these new steps?
Is it possible to link the data region from BPF to the Element selection in a specific package?
Exmple: in BPF i select a category, time and entity.
When starting a package, i would like to have these selections filled automaticly in the associated fields of the package.
Regards
Achim

Hi,
1) We use Import manager to import the spreadsheet data.You can map the fields in Import Manager.
Once the data is imported ,you can see the data in Data manager.You can edit ,update certain records,validate them in data manager.
2)Person resposible for importing data must have Import manager and Data manager installed on PC.You can even automate the import process.Apart from this if you have any other role like approver then you can install Data manager only for them to approve via data manager
End Users can search using SRM .they dont need the clients intalled on their system.
Regards
Nisha

Planning area data not updated in infocube in APO system

Hi all,
User is uploading a flat file using addon program to an infocube 1, from this infocube data for sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE. I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
I have information that 2 weeks before data was properly updated, but this time data is not updated,
system version is SAP SCM 4.0

Hi Vivek
it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
some of the consistency check reports are :
/SAPAPO/OM17 - liveCache Consistency Check
/SAPAPO/TSCONS - Consistency Check for Time Series Network
/SAPAPO/CONSCHK - Model Consistency Check
and so and so forth..
you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
let me know if this helps.
Rgds, Sandeep

Error in accessing 'Data Manager'...

I'm using BO Xcelsius 30-day-evalution pack.
It's not allowing me to configure 'Data Manager' for external datasource connections, when I click on 'Data Manager' ( Data > Connections...) I get an error with below message and the application exits!
error message: An unhandled win32 exception occured in Xcelsius.exe [3960]
Does it mean that 30-day-evalution version doesn't support this feature...?
Help appriciated!

Hi,
check the below steps..
Solution
You can subsequently install the ODBC driver 'sqlod32.dll' using the tool 'odbcreg.exe' in the \pgm directory of the SAP DB installation (usually c:\sapdb\<DBNAME>\db\pgm).
The call syntax is as follows:
odbcreg LiveCache -i -p <complete path to sqlod32.dll>
(Note: The path you have to enter specifies the directory in which the Dll lies, it does not specify the DII itself.)
For example:
odbcreg LiveCache -i -p c:\sapdb\<DBNAME>\db\pgm
Note: As of SAP DB Version 7.3.00 Build 33, you are required to register to another path. The example would then be as follows:
odbcreg LiveCache -i -p c:\sapdb\programs\pgm
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab.

Data Manager in 9i or 10g

Hi dears.
I am using oracle 8.0.5. I always using Data Manager for import and export.
Now i have installed oralce 9i and 10g. in both of these version i could not found Data Manager.
Can some body help me how i import and export by 9i or 10g
thns

Can some body help me how i import and export by 9i or 10gFor 9i/10g -- [http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023560]
For 10g and above --> [http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/part_dp.htm]
Anand

Automate Data Manager - for particular infocube in BW

Similar Messages

Maybe you are looking for