Automated , after adding people to DC....

Hello all,
I have now a serval people employed,
And now we are groing, we have serval OU's with dffrent staf's and functions.
Now they have all a private_folder, central folder where they can put all the documents for each other to see/
But now my question is,
How can i automate this, so when people are added to the DC they al get a new private_folder and have acces to the central folder automated? I tought first of VBscripts, but cant find nothing about it.
can somebody help me out here????

is this a little bit the same as in a situation like.
You have already all the shared_folders, but you only add the new person to a security group where he haves the permissions to do what it supposed to do in that security groep? Is there a possible way in AD-DS that when you choose a groep there he automated
makes a shared_path or is this the same thing,.,. ????

Similar Messages

Can I use the volume sliders after adding automation to tracks?

After adding a whole bunch of automation to pretty much every track on my first real project on GarageBand, I started trying to mix, and it seems the volume sliders are all locked up on the tracks with automation. I really don't want to have to add a million more automation points just to mix the song properly, so if anyone has a solution, that would be greatly appreciated!
Thanks!

Can I use the volume sliders after adding automation to tracks?
no
if anyone has a solution
you can select all the points by clicking in the header, and then drag them, though

Sharpoint designer 2013 crashes when Workflow People/Group Selection after adding AAM

I have same issue as mention in this post. Sharpoint
designer 2013 Stopping when Workflow People/Group Selection. SharePoint designer crashing after selecting peopicker in workflow. This is happening after adding AAM url.
And also as answer mentioned My website has same thing. like http://<systemname> as
Default and http:\\mycompany.com as
intranet.
And aslo I opened in website in designer is http://<systemname> .
It used to work before I adding AAM url. Now it is not working.
ItsMeSri SP 2013 Foundation

Hi,
Please check ULS log for more information about error to help narrow down the issue.
If you find error message as "the service '/_vti_bin/spclaimproviderwebservice.svc' cannot be activated due to an exception during compilation, The exception message is: This collection already contains an address with scheme http, There can be
at most one address per scheme in this collection.
http://xblogs.kompas-xnet.si/post/SharePoint-Designer-2013-Crashing-when-using-select-peoplegroups-from-SharePoint-site.aspx
Then the issue might be caused by more than one IIS Site Binding in single web application.
Please firstly remove AAM settings following the steps below:
In IIS manager, remove the added url binding from IIS site for SharePoint web application.
In CA, remove url under AAM settings and execute IISReset. Now you can check if the issue is resolved.
If you need to configure AAM for your web application, please extend web application and set AAM on the extended web application.
Regards,
Rebecca Tu
TechNet Community Support

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

I am unable to merge the call after adding in iphone 4 , can anybody help me ?

Unable to merge call for conference after adding new call . Can anybody help ?

Conference calls With GSM, you can set up a conference call with up to five people at a time, depending on your carrier.
Create a conference call: While on a call, tap Add Call, make another call, then tap Merge Calls. Repeat to add more people to the conference.
Drop one person: Tap Conference, tap next to a person, then tap End Call.
Talk privately with one person: Tap Conference, then tap Private next to the person. Tap Merge Calls to resume the conference.
Add an incoming caller: Tap Hold Call + Answer, then tap Merge Calls. Note: You can’t make a FaceTime video call when you’re on a conference call

After adding unable editing to UDF

Dear All,
Is there a way to disable UDF from changes after adding?
For example I have created UDF in A/R invoice and after creating one invoice with UDF, I don't want people come and edit the UDF after invoice have been created.
Thanks.

By user, you can use CTRL SHIFT B to manage the user fields and make that inactive for each user. They will need authorisation to complete the task, then remove the authorisation.
It's a bit of a mission, but it does work.
Using the new "Copy Form Settings" function, this can be copied across users.

IChat contact disappears a few seconds after adding

iChat contact disappears a few seconds after adding. For some reason it only happens with this one person.

Hi,
First of all go to the iChat Menu bar > View Menu and make sure you are showing Off Line Buddies ?
Do they appear as Off Line ?
Next go to iChat > Preferences > Accounts > Security tab and make sure they are not in the Block List (Or are In the Allow Specific People if you are using it) Preferably test with Allow All.
Make sure you are not trying to add them to the Recent Buddies Group as this is not really on you computer.
Lastly get them to email the Screen Name to you.
This will allow you to check the Spelling.
NOTE: if missplelt or blocked in some way they should appear in the Off Line Buddies.
One other option is that you are adding then as a @Mac.com name when they are in fact an AIM name (or any name variant of this)
For Instance
ralphjohnsr
[email protected]
and [email protected] are in fact three different Screen Names (or possibly people)
11:53 PM Monday; August 3, 2009

After adding folders to iTunes library, now have duplicates of each song

I store all my music on a separate drive, M:\
I have a specific file structure setup that has worked for me for years, M:\Artist\Album
I recently received an iPod for my birthday, and started using iTunes. After adding my music drive (M:\) for inclusion into the library (without "keep..." and "copy..." selected, as to keep my current file structure intact), when selecting "File->Display Duplicates" just about every song in the library has a duplicate, one in the original folder "M:\Artist\Album", and another in "M:\Playlists\..\Artist\Album". I understand that basically somehow iTunes glitched and started in the "M:\Playlist" directory when adding to the library at some point, however I am at a loss as to how. In my actual folders I only have 1 copy of each song, so basically iTunes is making a symbolic link to each song and adding it into the library as a separate song.
I have over 9000 (must...resist...meme...) songs in my library, and removing and restoring takes quite a while. I'm pretty sure I'm going to have to do this at least once now, but any ideas as to why or advice on how to avoid this particular problem in the future?
I am pretty set in my ways of my current file structure, since I don't use iTunes as my primary media software, so I would prefer to not have to resort to succumbing to just letting iTunes handle everything the way it wants (I pretty much hate that).
Thank you for any suggestions you may have.
EDIT: Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?
Message was edited by: kaziekama

If you have "Keep..." and "Copy..." unchecked, iTunes will simply reference the existing file, and will not change your file structure, as you correctly note.
I'm fairly sure that some other program is operating on your files. The "Playlists" folder that you mention has nothing to do with iTunes. On my PC, only Windows Media and Roxio use it.
To your question +"Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?"+ the answer is no. When iTunes rips a CD, it names the files as track number and title, with no option to do differently. And as far as placing the ripped files, they go in Artist/Album, with no option to do differently. As full-featured ripping programs go, iTunes is not even in the race.

How do I set up my Imac after adding a SSD along with my existing HD

How do I set up my Imac after adding a SSD so that my system and apps are on the SSD and everything else is on the HD? I am using mountain Lion. I want to make sure I can still do Time Machine backups.
I was planning on first formatting the SSD and then using Migration Assistant to copy the System and the Library and the Apps over. Where it gets confusing is the User account where some of the items will be on the SSD but I want all my folders to be on the HD. Do I just not copy over that other stuff and once I restart from the SSD it will know where all the folders are? Is there anything I need to know about setting up a time machine backup after that? Will the backup I had from the one drive have to be erased and start a whole new backup?
I just want to do this right so I don't have some major problems.
Thanks for any help.
Michael

time machine backed up your whole system data/everything in time machine hdd.
you want to use ssd over hdd so you need to put new mac os x in ssd.
then copy all the stuff that you want to put in ssd.
from my point of view put the mac os x and other application in ssd and leave other data in hdd.(music,movies,etc....)
more info about time machine : http://support.apple.com/kb/ht1427

What is the expected behavior in a zone after adding a new static route in Solaris 10....

Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.com

Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

Usertable error after adding a udf

I have a UI add-on that assigns values to a UDT by usertable object of the DI API, the problem is generated after adding a UDF from SAP menu and try to assign a value from the DI. The error is Invalida Field Name
My question is, is necessary to wait a while until SAP records the new field to be accessible by usertable?
Any suggestions?
oUserTable.UserFields.Fields.Item("U_" + colName).Value = respuesta;

Hi Ricardo,
As far as I know, you can use this field as soon as it is added to the usertable. But please make sure that this has been added successfully in your table and also make sure that ("U_" + colName ) is the same as it appears in SQL Server. Make sure that you are providing the right field name.
Hope it helps.
Thanks & Regards
Ankit Chauhan

A/P Invoice Vendor Ref Number Field updating after adding the Invoice Copy

Hi All,
              I am able to change the Vendor Reference number in A/P Invoice Document after adding the Document. I want to restrict this to happen. Plzz help how to do this????
Regards,
Sree.

1.The Modify Posted A/P Documents authorization refers to some fields only, e.g. the Due Date or Pay to address.
2. Additional authorization can be defined only for full forms, not for fields.
3. The SP Joseph suggests will refuse those modifications when the Vendor ref is empty.
To avoid modifying the Vendor ref you can use this code:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
set @li=
(select max(t.LogInstanc)
   from ADOC t
   where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
IF
   (select isnull(t.NumAtCard,'')
    from ADOC t
    where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
      and t.LogInstanc=@li-1)
!=(select isnull(t.NumAtCard,'')
   from OPCH t
   where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Vendor refernce not modifiable !'
end
END
Or if you want to allow modifying an unfilled reference, then this:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
declare @pref nvarchar(100)
set @li=
(select max(t.LogInstanc)
   from ADOC t
   where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
set @pref=
(select isnull(t.NumAtCard,'')
    from ADOC t
    where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
      and t.LogInstanc=@li-1)
If @pref !='' and @pref !=
(select isnull(t.NumAtCard,'')
   from OPCH t
   where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Filled vendor refernce not modifiable !'
end
END

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

After adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript

after adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript
I have no trouble viewing other websites with (most likely), flashfiles.
Here is the the PopUp message:
"Adobe-warning Adobe Flash PLayer has stopped a potentrially unsafe operation......"

In newer versions of Flash Pro, you can export to HTML5 Canvas, that's probably what they're talking about: Flash Professional Help | Creating and publishing an HTML5 Canvas document
.FLV and .SWF are Flash formats that won't show up on iOS (or an ever increasing number of other mobile devices). Mobile Flash was killed by Adobe a couple years ago, so the number of mobile devices that can see it is dwindling rapidly, don't use those formats if you want your viewers on mobile devices to see your content.

Automated , after adding people to DC....

Similar Messages

Maybe you are looking for