Automated detect on a process failure
Hi,
I was using SQL developer to execute a pl/sql code, my version is 1.5.3. the code is actually running a program to recover a failure of a process, when the process fail, i need to recover manually by enter the date of the process fail and the last day of recovery. My question, is there any method or way to automatic recover the process or job when it failed? Did sql developer provide some function that can detect the process had failed?
Thanks
create or replace PACKAGE BODY Ewaste_Inventory_Recovery AS
PROCEDURE Inventory_Recovery (vFromDate VARCHAR2, vToDate VARCHAR2) IS
dLoopDay DATE;
dFromDate DATE;
dToDate DATE;
BEGIN
/* this will loop from failed date up to current date + 1 */
dLoopDay := TO_DATE(vFromDate, 'DD-MON-YY');
dFromDate := TO_DATE(vFromDate, 'DD-MON-YY');
dToDate := TO_DATE(vToDate, 'DD-MON-YY');
WHILE dLoopDay <= dToDate + 1
LOOP
IF dLoopDay < dToDate + 1 THEN
Inventory_Calculation(dLoopDay,'Yes');
ELSE
Inventory_Calculation(dLoopDay, 'No');
END IF;
dLoopDay := dLoopDay + 1;
END LOOP;
COMMIT;
END Inventory_Recovery;
PROCEDURE Inventory_Calculation (dInDate DATE, vInsertFlag VARCHAR2) IS
rDayBeforeInvRec Wste_Waste_Inventory%ROWTYPE;
rInDateInvRec Wste_Waste_Inventory%ROWTYPE;
fInDateReceiveQty FLOAT;
fInDateShipoutQty FLOAT;
fInDateOnHandQty FLOAT;
fInDateOpeningQty FLOAT;
nComponentId NUMBER(25);
vCompDept VARCHAR2(20);
vCompName VARCHAR2(80);
vWasteType VARCHAR2(2);
nGroupId NUMBER(25);
vComponentName VARCHAR2(80);
CURSOR Day_Before_Fail_Inv_Bal IS
SELECT * FROM wste_waste_inventory
WHERE wwin_date = dInDate -1;
CURSOR InDate_Rec_Exist IS
SELECT * FROM wste_waste_inventory
WHERE wwin_date = dInDate
AND wwin_wwco_id = nComponentId
AND wwin_comp_dept = vCompDept
AND wwin_waste_type = vWasteType
AND wwin_wwgr_id = nGroupId
AND wwin_component_name = vComponentName;
BEGIN
OPEN Day_Before_Fail_Inv_Bal;
LOOP
FETCH Day_Before_Fail_Inv_Bal INTO rDayBeforeInvRec;
nComponentId := rDayBeforeInvRec.wwin_wwco_id;
vCompDept := rDayBeforeInvRec.wwin_comp_dept;
vCompName := rDayBeforeInvRec.wwin_comp_name;
vWasteType := rDayBeforeInvRec.wwin_waste_type;
nGroupId := rDayBeforeInvRec.wwin_wwgr_id;
vComponentName := rDayBeforeInvRec.wwin_component_name;
OPEN InDate_Rec_Exist;
FETCH InDate_Rec_Exist INTO rInDateInvRec;
IF InDate_Rec_Exist%FOUND THEN
fInDateOpeningQty := rDayBeforeInvRec.wwin_onhand;
fInDateOnHandQty := rDayBeforeInvRec.wwin_onhand - rInDateInvRec.wwin_ship_out + rInDateInvRec.wwin_receive;
UPDATE wste_waste_inventory SET
WWIN_OPENING = fInDateOpeningQty,
WWIN_ONHAND = fInDateOnHandQty
WHERE wwin_date = dInDate
AND wwin_wwco_id = nComponentId
AND wwin_comp_dept = vCompDept
AND wwin_waste_type = vWasteType
AND wwin_wwgr_id = nGroupId
AND wwin_component_name = vComponentName;
ELSE
--IF vInsertFlag = 'Yes' THEN
fInDateOpeningQty := rDayBeforeInvRec.wwin_onhand;
fInDateOnHandQty := rDayBeforeInvRec.wwin_onhand;
INSERT INTO wste_waste_inventory (
WWIN_ID,
WWIN_WWCO_ID,
WWIN_RECEIVE,
WWIN_SHIP_OUT,
WWIN_ONHAND,
WWIN_OPENING,
WWIN_DATE,
WWIN_COMP_DEPT,
WWIN_COMP_NAME,
WWIN_WASTE_TYPE,
WWIN_WWGR_ID,
WWIN_COMPONENT_NAME )
VALUES (
SAPP_SEQ.nextval,
nComponentId,
0,
0,
fInDateOpeningQty,
fInDateOnHandQty,
TO_DATE(dInDate, 'DD-MON-YY'),
vCompDept,
vCompName,
vWasteType,
nGroupId,
vComponentName );
--END IF;
END IF;
CLOSE InDate_Rec_Exist;
EXIT WHEN Day_Before_Fail_Inv_Bal%NOTFOUND;
END LOOP;
CLOSE Day_Before_Fail_Inv_Bal;
COMMIT;
END Inventory_Calculation;
END Ewaste_Inventory_Recovery;
-K- said
What exactly do you want to automate? The program can automatically detect failure when the process fail, as you see my code, i need to manually key in the parameter date for Inventory_Recovery (vFromDate VARCHAR2, vToDate VARCHAR2) when i recover the job.
What do you mean by recovering?Recover the inventory because the process/job has downtime or something.....
Similar Messages
-
Process Failure when communicating over MODBUS using LabVIEW 2011 and DSC
I'm currently trying to read from a PLC's holding registers using MODBUS/TCP. I've confirmed that the PLC is updating the values and responding to MODBUS communication correctly using a third party program called Modbus Poll. However, when I try to poll the PLC using LabVIEW's shared variable engine, I am unable to read any values from the same addresses that I'm viewing with Modbus Poll.
My setup simply consists of a PC connected directly to the PLC over Ethernet, with no router in between. I am using LabVIEW 2011 SP1 with the DSC module.
I opened the NI Distributed Systems Manager to view the status of all shared variables in the Modbus library that I created and I've noticed that the CommFail bit is permanently set to "true". All other variables with a "read" access mode report "Process Failure". I've tried restarting the process as well as stopping and starting the local variable engine with no success. I've also restarted my computer several times to see if any services were failing, but this does not seem to have fixed the problem.
I finally resorted to monitoring communications over the network card that I have the PLC plugged into via Ethernet using Wireshark and I've found that while Modbus Poll is communicating with the PLC, many MODBUS and TCP packets are sent and received. However, when solely using LabVIEW or the NI DSM to communicate with the PLC, there does not appear to be any communication over the network card.
Something that may be worth noting is that I was able to communicate with the PLC and read values from it with the DSM on just one occasion, when I first figured out which addresses I should be reading from. It all stopped working shortly thereafter. Prior to this, "CommFail" was not usually set to "true" with my current configuration. Thinking that it was my firewall, I have since turned my firewall off, but this seems to have had no effect on the problem either.
Any help on this matter would be appreciated.
Solved!
Go to Solution.Just a thought but I think the register addresses used by LabVIEW are one off of the actual register #. I was using a CRIO as a modbus IO Server and had to shift the register addresses by 1 to get things to work correctly (can;t recall if it was +1 or -1). This is documented somewhere on ni.com but can;t seem to find it now. But here is another link that may help:
http://zone.ni.com/reference/en-XX/help/371618E-01/lvmve/dsc_modbus_using/
Dan -
Soap fault: SOAP processing failure, error id = 1018
Hello,
if I try to call a web service exposed via XI, i have this error message:
soap fault: SOAP processing failure, error id = 1018
Can someone help me to solve this problem?
Thank youThe following OSS note talks of 1018 error, see if it helps.
[946658|https://service.sap.com/sap/support/notes/946658] -
How to make detection and acquasition processes faster on 6602 board ?
Hi to everybody,
Currently I am using a NI 6602 board. And I am designing my project using VC++ in .NET framework(1.1) .
In my application, I have to wait a digital signal(triggering signal) to go high level to start my acquasition.
At first, I tried to check continuously that incoming digital signal in a seperate thread using ReadSingleSampleSingleLine() fxn (polling). In my application there aren't so much threads , just 3-4 threads, and this thread has the highest priority.
But I recognised that I am missing some acquasition data after I detect the trigger signal.
In more detail the case is: when the trigger signal arrives, I have to capture an incoming byte(which is available on another 8 digital input lines for just 5-6 microseconds).
And the problem is : I can detect the trigger signal by polling but I am missing the incoming byte. I am trying to detect the incoming byte using ReadSingleSamplePortByte() function again by polling. The incoming byte disappears before I manage to read it.
My fist question:
1. Is there anything that you can suggest to make my detection and acquasition process faster?
I tried to use digital edge triggering and change detection events hoping to faster my process. But I got an exception about my board does not support that kind of triggering.
My second question:
2. Is there any way to use digital edge triggering or change detection events in 6602 board?
This is the first time I am using an NI board.
I noticed that 6602 is specialized on timer counter concepts, not on digital I/O concepts. But I don't have a chance to use any other board right now and I have to manage my application using 6602.
any help is welcomed.
thanks in advance.
koray.In a more readable form:
Hi to everybody,
Currently I am using a NI 6602 board. And I am designing my project using VC++ in .NET framework(1.1) .
In my application, I have to wait a digital signal(triggering signal) to go high level to start my acquasition.
At first, I tried to check continuously that incoming digital signal in a seperate thread using ReadSingleSampleSingleLine() fxn (polling). In my application there aren't so much threads , just 3-4 threads, and this thread has the highest priority. But I recognised that I am missing some acquasition data after I detect the trigger signal.
In more detail the case is: when the trigger signal arrives, I have to capture an incoming byte(which is available on another 8 digital input lines for just 5-6 microseconds).
And the problem is : I can detect the trigger signal by polling but I am missing the incoming byte. I am trying to detect the incoming byte using ReadSingleSamplePortByte() function again by polling. The incoming byte disappears before I manage to read it.
My fist question:
1. Is there anything that you can suggest to make my detection and acquasition process faster?
I tried to use digital edge triggering and change detection events hoping to faster my process. But I got an exception about my board does not support that kind of triggering.
My second question:
2. Is there any way to use digital edge triggering or change detection events in 6602 board?
This is the first time I am using an NI board. I noticed that 6602 is specialized on timer counter concepts, not on digital I/O concepts. But I don't have a chance to use any other board right now and I have to manage my application using 6602.
any help is welcomed.
thanks in advance.
koray. -
SOAP processing failure, error id = 112
Hi,
i call a web service and get the following error message:
- <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
- <soap-env:Body>
- <soap-env:Fault>
<faultcode>soap-env:Server</faultcode>
<faultstring xml:lang="en">SOAP processing failure, error id = 112</faultstring>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>
I have no answer find in the forum.
Any ideas?
regardsdoes the connection test work in SM59??
I think you got to involve a basis guy. unless I can't see your proxy settings, your dev_traces and so on I can#t diagnose your problem correctly.
the unallowed XML-Tag error could arise in the following situation:
you call a service, but your proxy doesn't forward the request due to authentication or other problems and returns you something like
<html><body><h1>A proxy error occured. Call your admin.</h1></body></html>
this is because the proxy assumes you use a browser and therefore returns a 'nicely formatted answer'(i.e. one in HTML, which you could easily understand if you used a browser).
If its not the proxy your webserver could return for instance a 401-Forbidden, which also often comes nicely formatted to be rendered with a browser.
Your proxy runtime on the other side expects no other answer than one starting with
<xml ... > ....
since yours starts with
<html>...
it says 'unnallowed XML tag'.
This way there can be numerous errors and I can only advice you to use all debugging tools available and inspect the communication carefully.
anton
Message was edited by:
Anton Wenzelhuemer -
SOAP processing failure, error id = 1001
Hi,
I am trying to implement the yahoo widgets usingthe following blog:
BI Data Widget - Weblog Series & Pre-requisites
I am stuck at STEP 14. I am getting the error :
"An error has occurred. Maybe the request is not accepted by the server:
SOAP processing failure, error id = 1001"
Any idea how to rectify this. I have activated the service in SE80 also.
Thanks,Hi Avihai,
I exposed custom RFC as a webservice and the url specified in the reciever adapter is http://pdcntwr.wipro.com:8000/sap/bc/srt/rfc/sap/Z_Get_Transport_Request?sap-client=100.
Please let me know if anything needs to be done.
Please find the dump.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PARSING">ADAPTER.SOAP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>soap fault: SOAP processing failure, error id = 1001</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
How to Configure alert for process failures
Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi -
Hello All , I have installed Java and ABAP sneak preview on the same machine . I have also created a service from an existing BAPI 'BAPI_FLBOOKING_GETLIST' and released the service . When I am trying to test this new service from ZICF transaction then I get following error :
'SOAP processing failure, error id = 112' .
Has any one faced and resolved the same error ? Any help would be greatly appreciated .
Thanks
RajeshHi Avihai,
I exposed custom RFC as a webservice and the url specified in the reciever adapter is http://pdcntwr.wipro.com:8000/sap/bc/srt/rfc/sap/Z_Get_Transport_Request?sap-client=100.
Please let me know if anything needs to be done.
Please find the dump.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PARSING">ADAPTER.SOAP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>soap fault: SOAP processing failure, error id = 1001</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
32bit Primary to 64bit Standby-"ORA-00704: bootstrap process failure"
Hello All,
As per the Doc ID 414043.1 it is possible to use mixed word size primary-standby configurations since 10g and better in 11g.
So i created my test env:-
OS: Linux 5.5 64bit
DB Name: TEST
Primary - TEST32 on 32bit Oracle Home
Standby- TEST64 on 64bit Oracle Home
I could apply TEST32's archive logs(manually) on TEST64 without any problem, but when i tried to migrate to 64bit it kept failed with "ORA-00704: bootstrap process failure ORA-39700: database must be opened with UPGRADE option"
What i did on TEST64 is:
1) Activate physical standby
2) Startup Upgrade
3)@?/rdbms/admin/utlirp.sql
4)@?/rdbms/admin/utlrp.sql
5)Shutdown
6)Startup
When i issue startup(step 6); it fails with
<pre>
SQL> startup;
ORACLE instance started.
Total System Global Area 1670221824 bytes
Fixed Size 2227072 bytes
Variable Size 419431552 bytes
Database Buffers 1241513984 bytes
Redo Buffers 7049216 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 22712
Session ID: 126 Serial number: 5
SQL> exit
</pre>
Did i go wrong somewhere ?
TIA,
JJWhat i did on TEST64 is:
1) Activate physical standby
2) Startup Upgrade
3)@?/rdbms/admin/utlirp.sql
4)@?/rdbms/admin/utlrp.sql
5)Shutdown
6)Startup
SQL> startup;
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 22712
Session ID: 126 Serial number: 5SQL> Startup upgrade. -
Hi Everybody,
Database Version:Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
Os:Windows Xp.
When I am trying to startup the Database it giving me the following error..
SQL> startup
ORACLE instance started.
Total System Global Area 113246208 bytes
Fixed Size 1247588 bytes
Variable Size 58721948 bytes
Database Buffers 50331648 bytes
Redo Buffers 2945024 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forcedWhen i looked into the alert log file it showing me the follwoing error's
Fri Oct 17 15:47:22 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\udump\primary_ora_3812.trc:
ORA-00704: bootstrap process failure
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 16 bytes of shared memory ("shared pool","select o.owner#,o.name,o.nam...","sql area","kggsmInitCompact:offsetVec")
Fri Oct 17 15:47:22 2008
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
ARC2 started with pid=16, OS id=3024
Fri Oct 17 15:47:22 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_lns1_872.trc:
ORA-00704: bootstrap process failure
Fri Oct 17 15:47:22 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_reco_3120.trc:
ORA-00704: bootstrap process failure
Fri Oct 17 15:47:22 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_pmon_2652.trc:
ORA-00704: bootstrap process failure
Fri Oct 17 15:47:23 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_ckpt_928.trc:
ORA-00704: bootstrap process failure
Fri Oct 17 15:47:23 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_lgwr_3332.trc:
ORA-00704: bootstrap process failure
Fri Oct 17 15:47:23 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_dbw0_1696.trc:
ORA-00704: bootstrap process failure
Fri Oct 17 15:47:23 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_mman_1724.trc:
ORA-00704: bootstrap process failure
Fri Oct 17 15:47:24 2008
Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_psp0_2464.trc:
ORA-00704: bootstrap process failure
Instance terminated by USER, pid = 3812
ORA-1092 signalled during: ALTER DATABASE OPEN...even i looked into the trace files mentioned in the alert log but no definite information is provided out there.....
How to overcome this Bootstrap process failure error.......
Any Help Appreciated..
Regards,
Prosenjit Mukherjee.Recommended action for ORA-00704 is to contact Oracle support.
Just out of curiosity, whats the machine configuration? -
ORA-00704: bootstrap process failure and SYSTEM datafile corrupt
We have an Oracle 10g Express database that is getting the following error on startup.
ORA-00704: bootstrap process failure
It is also showing that the SYSTEM datafile is corrupt. And unfortunately the backups are gone. Is there any way to recover from this without a backup? Maybe some hidden undocumented parameter???
We do have some full database exports from a couple weeks ago so it is not a complete loss but would really like a full recover.Windows XP
We have tried allowresetlogs_corruption and allowread_only_corruption and no luck so far.
ALTER DATABASE MOUNT
Thu Aug 09 08:49:28 2012
Setting recovery target incarnation to 2
Thu Aug 09 08:49:28 2012
Successful mount of redo thread 1, with mount id 2672004948
Thu Aug 09 08:49:28 2012
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Thu Aug 09 08:49:50 2012
alter database open upgrade
Thu Aug 09 08:49:50 2012
Beginning crash recovery of 1 threads
Thu Aug 09 08:49:50 2012
Started redo scan
Thu Aug 09 08:49:50 2012
Completed redo scan
0 redo blocks read, 0 data blocks need recovery
Thu Aug 09 08:49:50 2012
Started redo application at
Thread 1: logseq 84298, block 3, scn 10745981851
Thu Aug 09 08:49:50 2012
Recovery of Online Redo Log: Thread 1 Group 4 Seq 84298 Reading mem 0
Mem# 0 errs 0: D:\DATA\ORACLE\ORADATA\XE\REDO04A.LOG
Mem# 1 errs 0: D:\DATA\ORACLE\ORADATA\XE\REDO04B.LOG
Thu Aug 09 08:49:50 2012
Completed redo application
Thu Aug 09 08:49:50 2012
Completed crash recovery at
Thread 1: logseq 84298, block 3, scn 10746001852
0 data blocks read, 0 data blocks written, 0 redo blocks read
Thu Aug 09 08:49:51 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=18, OS id=2524
Thu Aug 09 08:49:51 2012
ARC0: Archival started
ARC1 started with pid=20, OS id=2956
Thu Aug 09 08:49:52 2012
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 advanced to log sequence 84299
Thread 1 opened at log sequence 84299
Current log# 2 seq# 84299 mem# 0: D:\DATA\ORACLE\ORADATA\XE\REDO02A.LOG
Current log# 2 seq# 84299 mem# 1: D:\DATA\ORACLE\ORADATA\XE\REDO02B.LOG
Successful open of redo thread 1
Thu Aug 09 08:49:52 2012
ARC1: STARTING ARCH PROCESSES
Thu Aug 09 08:49:52 2012
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Thu Aug 09 08:49:52 2012
SMON: enabling cache recovery
Thu Aug 09 08:49:52 2012
ARC2: Archival started
Thu Aug 09 08:49:52 2012
ARC1: STARTING ARCH PROCESSES COMPLETE
ARC1: Becoming the heartbeat ARCH
ARC2 started with pid=21, OS id=3916
Thu Aug 09 08:49:54 2012
Successfully onlined Undo Tablespace 1.
Thu Aug 09 08:49:54 2012
SMON: enabling tx recovery
Thu Aug 09 08:49:54 2012
Database Characterset is WE8MSWIN1252
Thu Aug 09 08:49:56 2012
Hex dump of (file 1, block 39) in trace file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_876.trc
Corrupt block relative dba: 0x00400027 (file 1, block 39)
Bad check value found during buffer read
Data in bad block:
type: 6 format: 2 rdba: 0x00400027
last change scn: 0x0002.7fee0b69 seq: 0x1 flg: 0x06
spare1: 0x0 spare2: 0x0 spare3: 0x0
consistency value in tail: 0x0b690601
check value in block header: 0x8f6c
computed block checksum: 0x1000
Reread of rdba: 0x00400027 (file 1, block 39) found same corrupted data
Thu Aug 09 08:49:56 2012
Stopping background process MMNL
Thu Aug 09 08:49:56 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_876.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 39)
ORA-01110: data file 1: 'D:\DATA\ORACLE\ORADATA\XE\SYSTEM.DBF'
Thu Aug 09 08:49:57 2012
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
MMON started with pid=11, OS id=1012
Thu Aug 09 08:49:58 2012
ALTER SYSTEM enable restricted session;
MMNL started with pid=12, OS id=3584
Thu Aug 09 08:49:58 2012
ALTER SYSTEM SET systemtrig_enabled=FALSE SCOPE=MEMORY;
Thu Aug 09 08:49:58 2012
ALTER SYSTEM SET aq_tm_processes=0 SCOPE=MEMORY;
Thu Aug 09 08:49:58 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_324.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 39)
ORA-01110: data file 1: 'D:\DATA\ORACLE\ORADATA\XE\SYSTEM.DBF'
Thu Aug 09 08:49:58 2012
Error 604 happened during db open, shutting down database
USER: terminating instance due to error 604
Thu Aug 09 08:49:59 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_pmon_3120.trc:
ORA-00604: error occurred at recursive SQL level
Thu Aug 09 08:49:59 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_psp0_3444.trc:
ORA-00604: error occurred at recursive SQL level
Thu Aug 09 08:49:59 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mman_2592.trc:
ORA-00604: error occurred at recursive SQL level
Thu Aug 09 08:49:59 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dbw0_932.trc:
ORA-00604: error occurred at recursive SQL level
Thu Aug 09 08:49:59 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_ckpt_1156.trc:
ORA-00604: error occurred at recursive SQL level
Thu Aug 09 08:50:00 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_1508.trc:
ORA-00604: error occurred at recursive SQL level
Thu Aug 09 08:50:00 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_reco_2700.trc:
ORA-00604: error occurred at recursive SQL level
Thu Aug 09 08:50:00 2012
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_876.trc:
ORA-00604: error occurred at recursive SQL level -
hey,
please help me regarding the batch processing failure issue,
The file is placed in appropriate folder but in am getting an error when i execute it.
The error is
ORA-02291-integrity constraint
Please help Me OutWhat is in the user error log? (Toos > View Error Log). This is going to be a bit difficult to troubleshoot over the discussion forum, you may want to open a Service Request to allow an FDM analyst to view the files, users error logs, etc.
-
SQL30082N Security processing failed with reason "15" (PROCESSING FAILURE)
Hi all.
I'm managing the following error during a system copy:
<b>SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001</b>
Inside the db2diag.log, i have the following message:
<b>2007-10-15-16.44.56.793439+120 I718413554A270 LEVEL: Warning
PID : 483450 TID : 1
FUNCTION: DB2 Common, Security, Users and Groups, secLogMessage, probe:20
DATA #1 : String, 64 bytes
Password validation for user sapr3 failed with rc = -2146500315</b>
Can anyone help?
Thanks and regards,
Marco.Hi,
check if the files
$INSTHOME/sqllib/security/db2c?pw
have the correct permissions. They need a SUID bit to root.
If the SUID bit is not set, you can do a
<db2_install_dir>/instance/db2iupdt db2<dbname>
as user root to update your DB2 instance. This will set the permissions correctly.
Regards
Frank -
Group Policy processing failure on 2008 when MIX Domain 2003 with DC 2008
Dear I try to add additional Windows 2008 Domain to My Domain controller 2003 and I ma Receiving Group policy error in DC 2008 With Event ID 1055
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1055</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-06T14:36:44.411955300Z" />
<EventRecordID>3859</EventRecordID>
<Correlation ActivityID="{28DAD258-26D0-4C1E-A4B7-F37DEE04C8F1}" />
<Execution ProcessID="952" ThreadID="3276" />
<Channel>System</Channel>
<Computer>PRIMARYDC.Qtit.com</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1632</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">1578</Data>
<Data Name="ErrorCode">5</Data>
<Data Name="ErrorDescription">Access is denied.</Data>
</EventData>
</Event>
I install See KB939820 for a hotfix applicable to Microsoft DC 2003 regrading to he KRBTGT account
Refer Url : http://support.microsoft.com/kb/939820
I run dcdiag /v on and repadmin /showrepl at DC 2008
the dcdiag /v result
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine PRIMARYDC, is a Directory Server.
Home Server = PRIMARYDC
* Connecting to directory service on server PRIMARYDC.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=Qtit,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=Qtit,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\PRIMARYDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... PRIMARYDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\PRIMARYDC
Starting test: Advertising
The DC PRIMARYDC is advertising itself as a DC and having a DS.
The DC PRIMARYDC is advertising as an LDAP server
The DC PRIMARYDC is advertising as having a writeable directory
The DC PRIMARYDC is advertising as a Key Distribution Center
The DC PRIMARYDC is advertising as a time server
The DS PRIMARYDC is advertising as a GC.
......................... PRIMARYDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
A warning event occurred. EventID: 0x800034C8
Time Generated: 03/06/2014 10:18:56
Event String:
The File Replication Service has detected an enabled disk write cache on the drive containing the directory c:\windows\ntfrs\jet on the computer PRIMARYDC. The File Replication Service might not recover when power to
the drive is interrupted and critical updates are lost.
A warning event occurred. EventID: 0x800034C8
Time Generated: 03/06/2014 10:53:21
Event String:
The File Replication Service has detected an enabled disk write cache on the drive containing the directory c:\windows\ntfrs\jet on the computer PRIMARYDC. The File Replication Service might not recover when power to
the drive is interrupted and critical updates are lost.
......................... PRIMARYDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... PRIMARYDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... PRIMARYDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... PRIMARYDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Domain Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role PDC Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Rid Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
......................... PRIMARYDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC PRIMARYDC on DC PRIMARYDC.
* SPN found :LDAP/PRIMARYDC.Qtit.com/Qtit.com
* SPN found :LDAP/PRIMARYDC.Qtit.com
* SPN found :LDAP/PRIMARYDC
* SPN found :LDAP/PRIMARYDC.Qtit.com/QTIT
* SPN found :LDAP/e3d8c76c-1b59-4de6-9f7f-c438df9a2863._msdcs.Qtit.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/e3d8c76c-1b59-4de6-9f7f-c438df9a2863/Qtit.com
* SPN found :HOST/PRIMARYDC.Qtit.com/Qtit.com
* SPN found :HOST/PRIMARYDC.Qtit.com
* SPN found :HOST/PRIMARYDC
* SPN found :HOST/PRIMARYDC.Qtit.com/QTIT
* SPN found :GC/PRIMARYDC.Qtit.com/Qtit.com
......................... PRIMARYDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC PRIMARYDC.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=Qtit,DC=com
(NDNC,Version 3)
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Qtit,DC=com
* Security Permissions Check for
DC=DomainDnsZones,DC=Qtit,DC=com
(NDNC,Version 3)
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Qtit,DC=com
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=Qtit,DC=com
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=Qtit,DC=com
(Configuration,Version 3)
* Security Permissions Check for
DC=Qtit,DC=com
(Domain,Version 3)
......................... PRIMARYDC failed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\PRIMARYDC\netlogon
Verified share \\PRIMARYDC\sysvol
......................... PRIMARYDC passed test NetLogons
Starting test: ObjectsReplicated
PRIMARYDC is in domain DC=Qtit,DC=com
Checking for CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com in domain DC=Qtit,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com in domain CN=Configuration,DC=Qtit,DC=com on 1 servers
Object is up-to-date on all servers.
......................... PRIMARYDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=Qtit,DC=com
Latency information for 18 entries in the vector were ignored.
18 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=Qtit,DC=com
Latency information for 18 entries in the vector were ignored.
18 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... PRIMARYDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14607 to 1073741823
* SecondAD.Qtit.com is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 14107 to 14606
* rIDPreviousAllocationPool is 14107 to 14606
* rIDNextRID: 14124
......................... PRIMARYDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... PRIMARYDC passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000A001
Time Generated: 03/06/2014 16:04:05
Event String:
The Security System could not establish a secured connection with the server ldap/PRIMARYDC.Qtit.com/[email protected]. No authentication protocol was available.
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:06:35
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:11:36
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:16:38
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:21:39
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:26:41
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:46
Event String:
Driver TOSHIBA e-STUDIO16/20/25 PCL 6 required for printer TOSHIBA e-STUDIO16/20/25 PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:48
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microsoft XPS Document Writer is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:49
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:14
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:16
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microsoft XPS Document Writer is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:16
Event String:
Driver WebEx Document Loader required for printer WebEx Document Loader is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:31:42
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
......................... PRIMARYDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com and backlink on
CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=PRIMARYDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=Qtit,DC=com
and backlink on
CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
are correct.
The system object reference (frsComputerReferenceBL)
CN=PRIMARYDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=Qtit,DC=com
and backlink on CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com are
correct.
......................... PRIMARYDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Qtit
Starting test: CheckSDRefDom
......................... Qtit passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Qtit passed test CrossRefValidation
Running enterprise tests on : Qtit.com
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
PDC Name: \\SecondAD.Qtit.com
Locator Flags: 0xe00001bd
Time Server Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
Preferred Time Server Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
KDC Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
......................... Qtit.com passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... Qtit.com passed test Intersite
repadmin /showrepl Result
******************************8
==== INBOUND NEIGHBORS ===================================
DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:41:04 was successful.
CN=Configuration,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:41:39 was successful.
CN=Schema,CN=Configuration,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 15:53:01 was successful.
DC=DomainDnsZones,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:27:31 was successful.
DC=ForestDnsZones,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 15:53:01 was successful.
I try to down the DC 2003 and access \\Qtit.com it success open the syslog on DC 2008
Any help or adviceHi,
Were there other error codes logged in Event Viewer?
Regarding Event ID 1055, the following article can be referred to for troubleshooting.
Event ID 1055 — Group Policy Preprocessing (Security)
http://technet.microsoft.com/en-us/library/cc727272(v=ws.10).aspx
Based on the report you posted, this issue may be related to FRS replication service. As a result, we can use ntfrsutl tool to check whether the replication service is healthy.
Regarding this point, the following articles can be referred to for more information.
Troubleshooting File Replication Service
http://technet.microsoft.com/en-us/library/bb727056.aspx
Ntfrsutl
http://technet.microsoft.com/en-us/library/hh875636.aspx
In addition, we can also try doing a non-authoritative Sysvol restore on Windows Server 2008 DC to see whether the issue persists.
Using the BurFlags registry key to reinitialize File Replication Service replica sets
http://support.microsoft.com/kb/290762/en-us
Hope it helps.
Best regards,
Frank Shen -
Automating a report generation process
Hello guys!
I just took on a new role in a company which requires me to deal with SAP BEx Analyzer.
I'm completely new to this, but having gone through the report generation process, I feel the method I'm using is horribly tedious and I believe there should be a way to automate the process since it's a recurring monthly procedure.
What I have to do currently to get the report is:
1. Launch SAP Logon
2. Filter the Connection which i want to find (i'll call it "PQI").
3. Key in my Username, Password and Language
4. Select the third container in the folder (i'll call it "03")
5. After I open 03, it launches Excel with BEx Analyzer add in initialized. The report is currently empty
6. Select Change Variable Values, fill in Fiscal Year, Month and Accounting Area.
7. After which it will take like 15minutes to query, and a about 16,000 ++ rows are generated.
Problem #1: The format isn't good, i have to right click on every cell that writes "Result" with yellow highlight and under it's properties I have to select "Result Rows" > "Always Suppress". (Ref1.PNG)
This is horribly painful considering I have to wait about 1 minute for each response (it's very slow). I have to repeat this for every yellow column in the
report. Can this be automated or done in 1 step?
8. After doing so for all rows, I have to right click the table and select "Query Properties" and shift all the Free Characteristics (about 10) to "Rows".
BUT, I can't do all at once, it will say "out of memory" and crash. I have to do so 2-3 rows at a time. Each time it'll take about 10-15 minutes to
populate. It's very painful.
9. After it's all done, i have to repeat step 7 again, which is to Suppress all result rows (Ref2.PNG)
10.Followed by which I have to go to Query Properties > Display Options > Uncheck "supress repeated key values"
11. When that is done I have to generate a PivotTable on the data.
I have to repeat the same steps on a monthly basis.
Is there a way I can script it to run the process for me monthly? Or any other way to make it less tedious?
Thanks so much for any input or suggestion guys!
Warmest Regards
BrandonSuppressing Result Rows can be done in Query designer itself for one time. You need not to do after you get the report every time.
If you always expect some 10 free chars constantly, i suggest you to insert them in Rows pane in Query designer but not in Analyzer. So that your report layout will be taking care with all settings what you want to do after the report generates in Excel. I mean you will get desired layout when you run the report first time itself.
Suppress repeated key values also can be done in Query designer itself one time.
By doing above, your report execution will not be tedious and it will be minimizing your efforts.
Over all, What I have understood is, you are doing all sorts of settings in Analyzer after getting such huge volume of data, by which it gives you crash error.
With all above steps, you can run your report with all pre-defined settings.
Maybe you are looking for
-
IPod not syncing / scrambled by iTunes
For the second time this month, iTunes 10 has decided to freeze/crash while working on my iPod. The first time I was left with an iPod that seemed to still have everything on there, but it was all unaccessible. It claimed there were 0 files on there,
-
1) Firefox will not upgrade or install. During the install process a window pops up asking me to choose between ADMINISTRATOR or CURRENT USER. Does not matter which radio button I select, the popup goes away, the install process just quits. Have unin
-
Error with OpenSearch result source in Sharepoint online
I have error with result sources that use the Opensearch protocol. I add them via Site Settings -> Edit Result Source -> New Result Source but everytime I test them in the Result Sources list I get error saying key is null or empty Parameter name: ke
-
Reducing Page Boarders when printing.
I have what might require a very simply solution (or perhaps not...). I constantly am required to print PDF documents. I enjoy using the print two pages to one in the printing options. My problem is the excessive footprint that many articles require
-
Edge running slow/not displaying some items on stage
My project's growing quite large but I'm keeping everything very tidy and importing only small files (tiny PNGs, well compressed short videos, etc) but I've found the file slowing down and now it's not displaying some of my images and symbols. Also w