Automated message from Essbase

Hi All,
i got this request from one of my business users.
H ewants to knwo whether Essbase can send an alert based on data value.
for example if the net income is below 50Mil it has to send an alert (email) to users list.
Is there any way to achieve this.
Thanks in advance.
Dornakal.
www.dornakal.blogspot.com

HI,
By using Trigger, you will send the alert message to users.
Types of Trigger:
There are two types of triggers: on-update triggers and after-update triggers.
On-update triggers are activated during the update process, when the block containing the data referenced by the trigger is brought into memory.
After-update triggers are activated after the update transaction is complete.
Note: On-update triggers are supported only on block storage databases.
I think you get the some idea about trigger. For more information, please refer the Essbase DBAG.....

Similar Messages

Automated Message from Oracle Files

Good Morning:
When I set a new user account in Collaboration Suite, Oracle files generated a email notification like:
"(Automated message from Oracle Files)
An account has been created for you on Oracle Files
(http://middleserver:7779/files/app) with the following
User ID: user01
In order to enable Protocol Access in Oracle Files you must go to
http://middleserver:7779/files/app/ProtocolAccess and
enter your Single Sign-On Password.
Thank you for using Oracle Files. "
But I need to change this message because the port setted is 7778 instead of 7779.
Where I can change this default port for generate the correct notification?
Thanks a lot for your help.

Hello,
I was wondering if we had the ability to handle this via the adapter?
Possible, but you need to develop adapter module for this.
It looks like a prologxmlepilog, but in your case, they are the ones sending. Where is the XML payload in the structure that you provided?
You can re-escape the characters using java mapping. For example, find %3C and replace with < . Here is the complete list of URL escape characters http://www.december.com/html/spec/esccodes.html
Hope this helps,
Mark

Automated messages from Apple in a language I do not speak

Hi Everyone!
For two weeks now everytime I connect to iCloud from any of my iOS devices, I get an automated message from Apple saying that I connected to iCloud using that specific device. The problem is that the message comes in French! Who can help me have Apple use English to communicate with me again????
All my settings in my devices and iCloud have the language set for English.
Thanks a lot!
The message is as follows:
Cher(ère) User,
Votre identifiant Apple ([email protected]) a été utilisé pour ouvrir une session iCloud et iMessage à partir d’un iPhone 4S appelé « User´s iPhone ».
Si vous n’avez pas récemment configuré un iPhone avec votre identifiant Apple, il serait plus sûr de changer le mot de passe de votre identifiant Apple.

Same here. Except I am English and am in Spain and everything comes in Spanish. Just because I am in a country for a while does not mean I speak that language well enough to read all the details...
APPLE PLEASE DON'T ASSUME THINGS THAT ARE NOT CORRECT!

Rejected record message from Essbase Studio load (3355)

I receive the following error when deploying an outline via Essbase Studio to an ASO cube (ver 11.1.2):
\\Record #36798 - Member XXX does not exist. Reference member column types require the field to be an existing member (3355)
As I read the error (BTW, can someone help me find the table of rejected record codes?), it is rejecting the assignment of an attribute to a member because the member does not exist.
What could be a reason though that I did not receive an "Error adding member XXX" rejection beforehand or something indicating that there was an error adding the member originally? I am puzzled because I cannot find anything special about the source data when comparing to the many others that loaded successfullly.

Hi All,
Towards this error if we are talking about Hyperion Essbase - Version 11.1.2.1.000 and later.
So mostly we are facing this issue has been verified as unpublished Bug 12967639.
As documented in KM:
Unable to Save ASO Outline After Renaming Members, "Error(1007072) Member [xxx] tagged as <REFER does not have a member to refer to" [ID 1465850.1]
Also towards ASO there is another document having all there as:
Oracle Hyperion Essbase and Aggregate Storage (ASO) [ID 1291202.1]
Thanks,
Shaker

Automated message recieved

Hi
I jsut recieved a skype call with an automated message from 'online help activation instructions' telling me my computer is not protected and referring me to a website.
Is this genuine? Does skype contact its users in this way?
Thanks for your help, and for this great service
YAL

SDM wrote:
I keep getting this message despite blocking the sender and reporting abuse. How is it that it keeps coming back? Is there any way to block it permanenently?
please visit the thread below for instructions and suggestions on how to deal with such unwanted and suspicious activities;
How to Handle Suspicious Calls, Messages and Contact Requests (Scam/Spam)
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Exception in OSM 7.0 when XSLT Automator received message from JMS

Hi
I have been prototyping on OSM 7.0 on Linux. I have a simple project, with two "Automated tasks" and some manual tasks.
The first Automated task is using a XSLT Sender, and sends a message to a JSM queue "A".
The second Automated task is using a XSLT Automator to listen for a JMS message received from an external system in JMS queue "B".
I have setup a JMS bridge on the WebLogic server where OMS is running, so that messages in queue "A" are forwared to queue "B".
So I am seeing messages being sent to queue A and then forwarded to queue B.
However, I keep getting exceptions when OSM is trying to process the messages received at queue B.
It complains about "ORA-20503: no current hist_seq_id found for given automation context.".
Does anybody know what this means ?
At first I thought it might be the "JMSCorrelationId" for the message which arrived at queue B which was wrong, but that does not seem to be the case, because if I sent a dummy message with a dummy JMS correlation id, then I get another exception : "ORA-20502: Automation context not found.". This exception is ok, and I understand the reason for it.
Here are som excerpts from the log file for the "no current hist_seq_id found" case :
com.mslv.oms.dataaccesslayer.ProxyException: ORA-20503: no current hist_seq_id found for given automation context.
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 27
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 88
ORA-06512: at line 1
Nested Exception: ORA-20503: no current hist_seq_id found for given automation context.
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 27
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 88
ORA-06512: at line 1
Nested Exception: java.sql.SQLException: ORA-20503: no current hist_seq_id found for given automation context.
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 27
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 88
ORA-06512: at line 1
     at com.mslv.oms.dataaccesslayer.a.execute(Unknown Source)
     at com.mslv.oms.dataaccesslayer.CallableProxy.execute(Unknown Source)
     at com.mslv.oms.automation.plugin.AutomationDispatcherImpl.getClusterRequestContext(Unknown Source)
     at oracle.communications.ordermanagement.cluster.message.ClusterMessageHandlerBean.onMessage(Unknown Source)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     Truncated. see log file for complete stacktrace
java.sql.SQLException: ORA-20503: no current hist_seq_id found for given automation context.
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 27
ORA-06512: at "ORDERMGMT.OM_AUTOMATION_PKG", line 88
ORA-06512: at line 1
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     Truncated. see log file for complete stacktrace
<11-Feb-2010 12:32:05,954 CET PM> <ERROR> <message.ClusterMessageHandlerBean> <ExecuteThread: '12' for queue: 'oms.automation'> <Failed to process cluster request due to ClusterRequestContext = NULL>
<Feb 11, 2010 12:32:05 PM CET> <Error> <oms> <BEA-000000> <message.ClusterMessageHandlerBean: Failed to process cluster request due to ClusterRequestContext = NULL>
<Feb 11, 2010 12:32:06 PM CET> <Warning> <EJB> <BEA-010065> <MessageDrivenBean threw an Exception in onMessage(). The exception was:
java.lang.RuntimeException: No transaction associated with request.
java.lang.RuntimeException: No transaction associated with request
     at oracle.communications.ordermanagement.cluster.message.ClusterMessageHandlerBean.onMessage(Unknown Source)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
     Truncated. see log file for complete stacktrace
Regards
Alf Hogemark
Edited by: user494649 on 11.feb.2010 04:26
Edited by: user494649 on 11.feb.2010 04:27

Hi,
I am trying to send message using XSLT sender for an automated task from osm 6.3.1 to ASAP 7.0, and also raised a request "Unable to deploy ATM/FrameRelay plugins for OSM 6.3.1" as i am stuck with an error- Null pointer Exception. could you share how did u deploy and register the plugins for sending message on automated tasks?
i am using ant for deploying the catridge and plugins,
Also could you point me the reason for the error
Thanks in advance.

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

Help: Removal of automated message (Sent from my BlackBerry smartphone with SprintSpeed)

I am getting the following automated message when I send outbound emails from my 8830 Blackberry:
"Sent from my BlackBerry® smartphone with SprintSpeed"
Is there a way to take this automated message off?
Thanks in advance.

this is the sprint bis site, you can login from your computer web browser. you should know your username and passwrd can be retrived by clickin on forgot password link and requesting passsword by entering pin numb of your devcie
http://www.sprint.blackberry.com
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Need help with an automating a "Message from webpage" click.

Any help would be appreciated. I guess I would consider myself as a beginner with VB.NET.
Basically - My program launches an internet explorer window. Points to a specific webpage that has records. Finds the "check all" and clicks it, then finds and clicks "delete".
I am stuck at this part. A "Message from webpage" pops up wanting to confirm the deletion of the records. I have 50 records per page and an excess of 14,000 records each day that need to be deleted. I do not have time to click OK on every single
page.
I have tried to sendkey function, which worked for a while but for some odd reason, it quit working. Someone suggested using API, which I know nothing about. Please help me! I am desperate!
Here is my code. I know the "threading.thread.sleep" isn't good to use but I need someway to pause. Like i said, I am a beginner, so please be easy!
Public Class Form1
Dim oInputs As Object
Dim oWShell As Object
Private Sub btndel_Click(sender As Object, e As EventArgs) Handles btndel.Click
With CreateObject("InternetExplorer.Application")
.visible = True
.navigate("WEDPAGE GOES HERE!")
Threading.Thread.Sleep(3000)
oInputs = .document.getElementsbytagname("a")
For Each elm In oInputs
If InStr(elm.innertext, "(Un)Check All") > 0 Then
elm.click()
Exit For
End If
Next
For Each elm In oInputs
If InStr(elm.innertext, "Delete") > 0 Then
elm.click()
Exit For
End If
Next
Do While .busy Or .readystate <> 4
Threading.Thread.Sleep(2000)
Loop
End With
Dim objShell = CreateObject("WScript.Shell")
Dim Success = objShell.AppActivate("Message from webpage")
Do Until Success = True
Threading.Thread.Sleep(1000)
Success = objShell.AppActivate("Message from webpage")
Loop
Application.DoEvents()
AppActivate("Message from webpage")
SendKeys.Send("{ENTER}")
End Sub

Hi msnyder1112,
Thank you for posting in MSDN forum.
Since this issue is related to the VB.NET, so we will move this case to VB forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I get rid of the automated message after my outgoing voicemail?

Hey Everyone,
I have a 16GB iPhone 3G, and I recently I contacted AT&T regarding problems I was having with the recently deployed Free Wi-Fi service at AT&T hotspots. The problem was resolved, but in the process AT&T reset my voicemail account. Since then, every time someone calls me, they hear my custom outgoing voicemail message, followed by the dreaded automated message, "At the tone, please record your message. When you are finished recording, you may hang up or press 1 for more options." One of my favorite things about the iPhone's visual voicemail was that it cut through all this type of excess! In an effort to resolve this (it was never like the before and I know I don't get the automated message when I call my friends who have iPhones), I called Apple Tech Support. They told me there to call the number 1-800-331-0500, and simply reset my pass code, and that this would fix it. Feeling relieved, I followed their instructions, but to no avail. I called AT&T and was told that "This is a new feature that AT&T has added to their voicemail service" and that "Anyone who has their voicemail reset would now have this new feature added to their voicemail." I was told there is no way to disable it! Is this in fact the case? Am I now stuck with this new "feature"? If anyone knows how to get rid of this, please let me know! If anyone from Apple is reading this, can you PLEASE see if anything can be done about removing this extremely annoying "feature" from iPhone voicemail? Thanks very much!
David

Hi David,
On your iPhone, when you press Phone> Voicemail, does it Call standard voicemail or show Visual Voicemail?
It sounds like this issue would be resolved by contacting AT&T again.
http://www.wireless.att.com/about/contact-us/contact-us-phone.jsp
Customer Support: 1-800-331-0500
Also, you might be able to find the answer on the AT&T message boards.
http://forums.wireless.att.com/cng/board?board.id=apple
-Jason

Error while extracting data from essbase

Hi All,
Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into the interface, an error occurs. And it works fine if I extract directly (with no joins).
Is there any other way except using staging table? Our data vloume is large, using staging table will waste lots of storages.
The messages as below.
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: Connecting to Essbase application [CORPPROD] on [172.18.93.150]:[1423] using username [admin].
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Successfully connected to the Essbase application.
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_FILE = D:\ODI_ESS_QUERIES\QUERY.TXT
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_TYPE = ReportScript
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_CALCULATION_SCRIPT = null
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXT_COL_DELIMITER =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option POST_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: inside getAppData()
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: Got Source Metadata
2011-07-12 23:34:01,119 ERROR [DwgCmdExecutionThread:null:49]: The number of columns returned by script [13] is less than the source data columns exposed [14]
com.hyperion.odi.essbase.ODIEssbaseException: The number of columns returned by script [13] is less than the source data columns exposed [14]
     at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.validateColumns(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.init(Unknown Source)
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor769.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx85.f$0(<string>:1)
     at org.python.pycode._pyx85.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
2011-07-12 23:34:01,119 INFO [DwgCmdExecutionThread:null:49]: Logging out and disconnecting from the essbase application.
From the working steps, I found a redundant column (Entity) was added while creating work table. Is it the reason?
create table HYP.C$_0CUX_ABC_HYP_INTERFACE
     C14_HSP_RATES      VARCHAR2(80) NULL,
     C3_ACCOUNT      VARCHAR2(80) NULL,
     C10_PERIOD      VARCHAR2(80) NULL,
     C7_SCENARIO      VARCHAR2(80) NULL,
     C9_CURRENCY      VARCHAR2(80) NULL,
     C15_YEAR      VARCHAR2(80) NULL,
     C6_DATATYPE      VARCHAR2(80) NULL,
     C2_VERSION      VARCHAR2(80) NULL,
     C1_CATEGORY      VARCHAR2(80) NULL,
     C12_ENTITY      VARCHAR2(80) NULL,
     C13_ENTITY      VARCHAR2(80) NULL,
     C11_DEPARTMENT      VARCHAR2(80) NULL,
     C8_PROJECT      VARCHAR2(80) NULL,
     C5_DATA      NUMBER(18,8) NULL
Appriciated!

Extract the essbase data to a staging area and then do the transformations in another interface.
The adaptor needs to extract the data first.
Cheers
John
http://john-goodwin.blogspot.com/

Not able to create a message from satellite system

Hello Everyone.
We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
Note : Error Message related to this problem is ....
<b>"Error in Local Message System : External number assignment, Enter notification num message was not Created."</b>
Thanks in advance.
Regards,
Nimesh V . Master

Hi, you need to check the number ranges for the notifications and make sure they are correct. Look in the IMG of the SAP Solution Manager system for the instructions. You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+. In the later SPs much of this configuration from the IMG is automated in the wizard.

Not receiving automated messages correctly for Droid

Is there a current problem with Droid not receiving automated messages correctly from short 5 digits numbers for example my dentist office sends out reminders for my appointments and they are not sending correctly I have included an example below of what it looks like below. You will see that there no message. I have put the message below of what I should have received from my dentist. So you can understand why people are confused and calling our office back wondering when there appointment is . (Yes, I work at the office and a patient
[10] 11 (Thu). Thanks! {edited for privacy}
Sammie, Reply with "YES" to confirm your appt at 10:00AM on 3/24/11 (Thurs). Thanks! {edited for privacy}
Is this something that can be fixed. Becasue I know that majority of ourpatients have Droids has it is a very popular phone and we are getting numerous complaints!
I will be looking forwrd to a response!

Well what's also weird is I'll send/receive other sms messages and there won't be any problems. But then, out of no where, my phone will get sms messages that are a few days old. I move around plenty in my area for work or other reasons so it's not like I stay in one location all the time. Also, I have Verizon and they have great coverage in my area anyway.

Data Export to Oracle table from essbase issue

Hello,
i am using a data export calc script to load data from essbase into an oracle table. We have Essbase 11.1.2.1 on windows 2008 64 bit R2 server. I have an ODBC system DSN created for this job.
However, when i launch this process i get a message in the log "Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]"
i have checked the ODBC.ini file also in C:\Windows directory and that file contains the connection entries...
Any thoughts as to why i am getting this error in one server whereas the same process on SIT server is working fine.
thanks...

please restart the application and try again . Check the application log if any details are there

Extracting Data from Essbase using ODI fails with: Cannot calculate file.

I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)

I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)

Automated message from Essbase

Similar Messages

Maybe you are looking for