Automated report email notification using SCCM 2012

For SCCM mail notification using Office365 exchange.
Is smtp rely required.. Please suggest and provide link

duplicate thread.you have also asked the same question here http://social.technet.microsoft.com/Forums/systemcenter/en-US/cccd6760-0416-4fed-b5df-d19fac00035f/automated-sccm-report-send-to-email-addresssccm-2012?forum=configmgrgeneral#0e84de61-c872-44fe-8544-f6b39450a44d
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Similar Messages

Adobe Creative Cloud Enterprise Deployment Issues using SCCM 2012 R2

Hi,
I have been trying to deploy Adobe Creative Cloud Enterprise to Windows 8.1 machines that are identical, using SCCM 2012 R2.
The Adobe package seems fine, because it seems to deploy successfully to some machines. And SCCM 2012 R2 has been configured correctly, as I can deploy other software using it, and again, it deploys Adobe CC successfully to some of the machines.
I have tried comparing the package that is downloaded on the test machine/client machine, with the original package on the distribution point, using Beyond Compare, and there are no differences.
I have contacted Adobe Enterprise Support, and they asked me to send to them log files from Event Viewer, the msi installer, and other Adobe logs, from the machine that failed the deployment. However, after Adobe studying them, they told me that they could not identify any problems... Strange, because I could have sworn that I saw error 1603 pop up over 20 times on different machines indicating that the 'Set-up.dat' file had a problem with it.
After all the testing on over 20 identical machines (same hardware/same software), using different configurations on SCCM 2012 R2 and the client machines, I still can't seem to have a reliable solution to deploying Adobe CC.
The fact that it deploys successfully on one machine and fails on another, or sometimes deploy to two machines and fail on another (simultaneously), is something that I don't understand.
Another thing is that, if I retry the deployment 10-15 times after it failed the first time, it might go through...
Adobe Enterprise Support asked me if they could remote into a machine that failed the deployment to have a look at it and I agreed to that option, but it seems like my issue has been ignored because they never got back to me.
Has anyone had this kind of problem or anything similar before?
I need to be able to deploy this remotely to 100+ machines. So installing manually is not an option.
Any help is appreciated.
This was posted in the wrong section a few days ago. I'm hoping I can get some help here.
Case Number: 1862659812
UPDATE: I spoke to Adobe Customer Support and after 1.5 hours on the phone with a remote session going on, problem was still not solved or identified. Additional log files have been sent and now I'm waiting for a call back.

Hi Robert,
We seem to be having a very similar issue. Our installs would randomly fail with error code 1603 and an error message about a fault in Set-up.dat. Failure rate was near 95% on our 900 machines. Adobe Support and Karl having been looking into our issues but so far no solution has been found.
Having done a lot of investigating we've managed to deploy our package using a schedule task running as a domain admin. This is a nasty solution and we don't intend on using this permanently, but we needed to get the package out.
Are you seeing any of the following:
Entries in PDApp.log:
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The Bootstrapper Process is (5).Stopping the installation process.
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to find the pdb database.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to get the local payload database handle.
Event Log:
Faulting application name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Faulting module name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Exception code: 0xc0000005
Fault offset: 0x000d7c52
Faulting process id: 0xb40
Faulting application start time: 0x01d072a073861622
Faulting application path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Faulting module path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Report Id: c86d9216-de93-11e4-8284-782bcb99e284
Faulting package full name:
Faulting package-relative application ID:
Installer Log
Indicates it can't find the Media_db. We noticed that the folder C:\Program Files (x86)\Common Files\Adobe\caps doesn't get created on the machines were the install fails, so error message is correct in that there isn't a Media_db.db. Sysinterals Process Monitor seems to show that the setup tried to create the folder/files but they don't actually get created. Copying a Media_db into the folder from another machine seems to allow the installation to almost finish, but unsurprisingly you end up with problems later on.

Deleting queued email notifications in SCSM 2012

Hi,
We have disabled the email notification channel in SCSM 2012 and the workflows which are used to trigger the email notification were running.
Now, we need to enable the notification channel. But, we suspect that all the old emails which are queued in workflow will trigger once we enable the notification and will spam the customers mailbox.
If this is the case, how can we find and kill the pending email notifications in SCSM 2012.
Please suggest how to proceed with this.
Thanks
Kumaresan Lakshmanan

Hi,
Take a look at the end of this post, right Before the appendix:
http://blogs.technet.com/b/servicemanager/archive/2013/01/14/troubleshooting-workflow-performance-and-delays.aspx
You will need to increase your watermark if you want to make sure that old notifications won't trigger.
Regards
//Anders
Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

Silently uninstall using sccm 2012 Manually installed software in my domain

Dear All
i am new to sccm 2012,
we are experiencing headache issue in my domain.my domain users are roaming laptop users.
we need to uninstall software silently using sccm 2012 configuration manager which software installed does not use sccm 2012(Manually installed by users).
please share your valuable article and suggestion according to this issue.....
Thanks
Parthiban.S
[email protected]

The most important is that you have to inventory the applications that are installed and based on that you have to decided which applications you want to remove. For those applications you can create uninstalls in ConfigMgr.
For some information:
http://blogs.technet.com/b/christianwb/archive/2014/03/17/using-configmgr-application-model-to-uninstall-old-software.aspx
And: http://technet.microsoft.com/en-us/library/gg682013.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Error while deploying Windows 2008 R2 using SCCM 2012 R2

I am trying to deploy Window 2008 R2 image (captured from a reference machine) using SCCM 2012 R2. I have integrated MDT 2013 with SCCM 2012 R2 and created an MDT task sequence. During deployment, towards the end of Applying image.wim, it gives me
an error that task sequence failed with the error code 0x80070002. And then the system reboots. After reboot, I am able to login to the Windows Server. It seems to work fine, but there are no applications etc installed. Also the _SMSTS log folder is still
present in the C drive. And in the smsts.log file, i can see errors like failed to copy unattend.xml file. Please help me.

Hi,
Error code 0x80070002, it means the system cannot find file specified.
For more information, please review the link below:
Task Sequence Failed with the Error Code 0x80070002
http://prajwaldesai.com/task-sequence-failed-error-code-0x80070002/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

What best way to turn on all computers remotely using sccm 2012 sp 1

what best way to turn on all computers remotely using sccm 2012
and what the difference between wake on lan and out of band service point role

Hey!!! I am a 1E engineer and MVP... we started the power management movement with our very first software product, created around 12 or so years ago, called 1E WakeUp. The complete solution which manages power on (integrated with SCCM, or stand alone if
you are not an SCCM shop) and power off (under a tightly controlled process) is called
NightWatchman
Here is a
recent blog post I authored that was the last in a series documenting the entire wake-up process including how it integrates with SCCM or stood up standalone. It contains links to those earlier posts that explain our entire technology, so you will likely
want to read all of them in order for a full understanding of our technology. It works incredibly well, is the most mature solution in the industry, and is extremely simple to install with minimal resources.
If you have any questions, feel free to reach out to me privately
Ed Aldrich | 1E | Pre-Sales Solutions Engineer | ConfigManager MVP 2003-2012

Email Notifications Using Macro's

Hi Experts
What is the prerequesite for Sending email notifications using Macros in the APO DP & SNP, as we have the Document Function(Macro Element) in the Macro Builder.
How to use Document Macro Element?
Sai

Hi Sai,
We have created same macro for client requirement. Just check the following logic Take appropriate logic & apply.
Logic:
IF key figure 1 > ( 5% of Key figure 2 + Key figure 2) then system show warring Massage,Alert & send to Users.
IF key figure 1 > ( 10% of Key figure 2 + Key figure 2) then system show Error Massage,Alert & send to Users.
Macro:
New macro
step1: calculation : ( 1 Iterations : W 25.2008; W 25.2008 )
Row: New macro aux. row1 ( Frm W 25.2008 ) =
( ( ( 5 / 100 ) *
Row: Additional Field 2 ( Frm W 25.2008 )
) +
Row: Additional Field 2 ( Frm W 25.2008 )
Row: New macro aux. row2 ( Frm W 25.2008 ) =
( ( ( 10 / 100 ) *
Row: Additional Field 2 ( Frm W 25.2008 )
) +
Row: Additional Field 2 ( Frm W 25.2008 )
step : send message : ( 1 Iterations : W 25.2008; W 25.2008 )
IF
New condition
Row: Additional Field 1 ( Frm W 25.2008 ) greater than Row: New macro aux. row1 ( Frm W 25.2008 )
IF
New condition
Row: Additional Field 1 ( Frm W 25.2008 ) less than Row: New macro aux. row2 ( Frm W 25.2008 )
Information ( warning )
MAIL WITH WARNING
ELSEIF
New condition
Row: Additional Field 1 ( Frm W 25.2008 )
greater than
Row: New macro aux. row2 ( Frm W 25.2008 )
Information ( error )
MAIL WITH ERROR
ENDIF
ENDIF
Hope this will help you...
Regards
Sujay

For find activated lync client using SCCM 2012

Hi All,
In my current company we have in deployed lync client. But we are not sure how many clients are activated.
Is there any way to find which system got activated using SCCM 2012.
Please suggest and let me know any reference.
Thanks

I really don't know, but I would guess that a file or registry key would change once it's activated. Basically, I would simply compare an activated system with a not activated system and look for the difference. Once you've located that you can create
a compliance setting to see how many system are actived, or not.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Import certificate in to Firefox certificate store using SCCM 2012 R2

Hello,
I'm trying to figure out how to import a certificate in to the Firefox certificate store using SCCM 2012 R2 to push out to 8,000 computers. The only answer I have found was to import the certificate manually on my computer and copy the "cert8.db" file out of my "appdata\Roaming\Mozilla\Firefox\Profiles\******.default\" folder and use this file to copy to all profiles on each computer. I have not tried this since I believe this is not a standard practice. Is there a Firefox certificate scripting tool that I can use to accomplish this or a recommended way?
Thanks,
Matt

Hi,
It is listed here:http://technet.microsoft.com/en-us/library/gg712298.aspx
There are a number of limitations to supporting workgroup computers:
Workgroup clients cannot locate management points from Active Directory Domain Services, and instead must use DNS, WINS, or another management point.
Global roaming is not supported, because clients cannot query Active Directory Domain Services for site information.
Active Directory discovery methods cannot discover computers in workgroups.
You cannot deploy software to users of workgroup computers.
You cannot use the client push installation method to install the client on workgroup computers.
Workgroup clients cannot use Kerberos for authentication and so might require manual approval.
A workgroup client cannot be configured as a distribution point. System Center 2012 Configuration Manager requires that distribution point computers be members of a domain.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to update Office 365 using SCCM 2012 R2?

Hi,
I am using SCCM 2012 R2 and Office 365 ProPlus.
At products list (Software Update Point Components Properties) there is not Office 365.
Office 365 automatically updates from Internet.
I need to know the following:
How to disable Internet automatic updates at Office 365
How to deploy updates for Office 365 from SCCM.
Thanks in advance!

Funny thing you can't deploy those updates via WSUS and/ or ConfigMgr. See for more information:
http://blogs.technet.com/b/office_resource_kit/archive/2014/01/21/managing-updates-for-office-365-proplus-part-1.aspx
Also, make sure to read part 2 as it provides dome guidance on controlled testing of those updates.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Windows 7 Deployment using SCCM 2012

I am installing Windows 7 Enterprise 64bit on HP Desktops and Laptops using SCCM 2012 task sequence. I captured an image from the reference computer using capture media. The image works fine on Hp Desktops but when I install the same image on HP laptops,
I get an error message right at the end "Windows Setup could not configure Windows to run on this computer's hardware". I captured another image with plain Windows 7 Enterprise without SP1, updates and drivers. it works perfectly fine on all desktops
and laptops both. Below is the setupact and setuperr error logs. Much appreciated.
SETUPACT.LOG
capisp.dll::CryptoSysPrep_Specialize: assigned CAPI machine guid "d01b5e9b-0af5-4b3c-a712-70977e79a177"
2014-08-26 21:19:04, Info capisp.dll::SamConnect failed: c00000dc
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: DisableAdministratorIfApplicable failed
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: returning 65b
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Info IBS Callback_Specialize: Internal Providers Specialized Failed. System can't proceed to handle Internal Providers
2014-08-26 21:19:04, Info IBS Callback_Specialize: Specialize return: [1627]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b
2014-08-26 21:19:04, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows Setup could not configure Windows to run on this computer's hardware.]
SETUPERR.LOG
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service usbhub20.
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b

Hi,
From your error log, we could see the root is the incorrect driver.
How did you get the driver in your first image? If you enable "PersistAllDeviceInstalls" configuration when you capture the image, all Plug and Play devices in reference computer are uninstalled during the generalize pass and then reinstalled
during the specialize pass.
However, it‘s not always applied to your laptop.
Thus I suggest you download the proper driver or change the BIOS hard disk drive setting to IDE to check the result.
Warning: This procedure may involve changing your hard disk drive settings in the BIOS. Incorrect changes to the BIOS of your computer can result in serious problems. Microsoft cannot guarantee that problems that result from changes to the
BIOS can be resolved. Change the BIOS settings at your own risk. Incorrect or corrupted BIOS settings can cause startup problems or shutdown problems.
In addition, you could refer to the article below:
“Windows Setup could not configure Windows on this computer’s hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
http://support.microsoft.com/kb/2466753/en-us
Karen Hu
TechNet Community Support

Using SCCM 2012 Compliance to check if a GPO applied

Is it possible to use SCCM 2012 Compliance feature to check if a AD GPO settings applied to a Device / User collection or not?
If Yes, then how?

You can do this with SCM (Security Compliance Manager), download here:
http://www.microsoft.com/en-us/download/details.aspx?id=16776
Import your GPOs to SCM some guidelines here:
http://4sysops.com/archives/microsoft-security-compliance-manager-scm-v2-part-1
Export your GPO from SCM to DCM format guides here:
http://blogs.msdn.com/b/scom_2012_upgrade_process__lessons_learned_during_my_upgrade_process/archive/2012/09/21/compliance-settings-sccm-2012.aspx
Import your DCM to SCCM and off you go

Use sccm 2012 R2 Toolkit on cu1

Hi :)
Is it ok to use sccm 2012 R2 toolkit on updated CU1 install or should I wait for updated toolkit verision ?
Best regards
Nenad

To tag onto Phil's answer, CUs don't change the (major) version of the product in any way -- they are simply a collection of hotfixes that do not change core functionality and thus do not affect tools designed to run with that (major) version. There are
always possibilities for bugs of course, but unless someone specifically identifies a bug, there's no plan to update the tools for CU1 because there's nothing to update. In fact, they've never had to update the tools for any previous CUs because of any problems.
Jason | http://blog.configmgrftw.com

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

Automated report email notification using SCCM 2012

Similar Messages

Maybe you are looking for