Automated reporting on dataloads for end-users

Dear forumers,
we are on BI 70
we are looking for a way to provide our endusers with a report/query, whichs shows the status of dataloads in each cube.
On forums I have found some tips on using the table RSREQDONE. Based on requests in this table, one should be able to provide a list with the number of records, start/stop times. When you create an infoSetQuery on this, it can give you some data.
But we load based on Process Chains, and we want to show the success or failure of each process chain, and show the date/time when this was completed. And we use DTP's for some of our loads, so no InfoPackages overall.
BTW: the technical status in a query on a multiProvider is not very helpfull, as this only shows the oldest data load from all underlying infoproviders; when one is a History cube which is updated once in the past, no usefull data here shown...
has someone looked into this as well? does someone have some tips, advice pointers for getting such a end-user usable query on data status?
-Jaap

You can build a query based on cube 0TCT_MC12. This will give you a status per process chain:
green yellow or red.
So in the query you put the process chain, date & the status.

Similar Messages

Any way to create a simple report selection menu for end user?

Hello. We purchased two full versions of Crystal Reports 2008, version 12.3.1.684. One copy is for me, where I create reports and the second copy is for an end user who runs them. I would like to create a basic menu so when he starts his copy of Crystal Reports it will open with this simple report menu. Is there a way to do this?

I would suggest you invest in small viewer tools for your user. The viewers can house the reports you create and your user can view them without accidently affecting the design structure of your report. With some viewers, you can even customize the report menu. You can begin with this website:
[http://www.kenhamady.com/bookmarks.html]
I hope this helps,
Regards,
Zack H.

Activity report for end-user ?

Hi,
One of my customers wish to get information about the use of it´s application. He is not the adminsitrator of the workspace.
As an administrator of the workspace you can run reports about activity for applications/users.
I would like to build it as a part of the application of my customer.
Can anyone point me in the right direction ?
Any reaction will be appreciated.
Leo

Hello Leo,
Maybe one of these views contain the data you need (to prevent you from re-inventing the wheel):
          APEX_WORKSPACE_ACTIVITY_LOG
               APEX_WORKSPACE_LOG_SUMMARY
               APEX_WORKSPACE_LOG_SUMMARY_USR
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

Recording NWBC scripts for End User Experience

Hi Experts,
I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording the script. We only have option to "Close all session and LogOff" in NWBC client .
When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
Please help me achieve this.
Regards,
Manish K

Hi,
for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
Maybe a similar strategy works for NWBC.. but I don't know the UI in detail.

Reset passwork for end user using XE version 2.1.0.00.39

Hi All,
I would like to create a link "Change Password" for end users to able to change their password anytime. I've followed the link below
Self Reset Password
but it still require the admin login before end users can change their password.
The following steps that I did:
1. Under "Shared Components", create a Navigation Bar entry name "Change Password".
2. On page 1, click on the "Change Password" link under Navigation Bar and entered
Target Type = URL
URL Target = javascript:popupURL('f?p=4350:53:&SESSION.:::53.F4350_P53_USER_NAME::APP_USER');
How do i make the "Change password" link go directly to reset password page after end users clicked on it without admin login require? I'm using a default authentication and all end users assigned to user group.
Thanks in advance,
Kevin

Kevin,
You want the users to go to popup page 58 (in application 4350). See this thread: Re: Pop Up Change Password Window . But I don't know if that will work in 2.1.
In general, you're better off using other types of account management tools such as LDAP.
Scott

Page customization for end user

is it possible to use other mechanism for end users to customize their own pages instead using the portal features since it's a little complicated cause each user needs to create new pages, add portlet, etc.
Can we use the mechanism like my cnn, my yahoo,excite and how to do that in a simple way?
thanks for helping

Hi,
I have the same question, but I would like to have a seperate page or application, showing only predetermined portlets, for users to choose from and place on their page. I do not want the end user to ever see the customization process Oracle uses. Can this be done???
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Karthika Siva ([email protected]):
A simple way to do this:
1. Create a page that will become the default page for end users. This page will have your branded look & feel (style) and contain a default set of portlets. These are portlets that you think your typical user will find useful.
2. Create portal user.
3. Grant one of the following privileges on the page to the user. Grant 'Full Customization' or 'Add Only Customization' depending on how much control you want to give the end user. Keep in mind that both of these privileges allow the end user to only customize their PRIVATE VERSION of the page. Others will see the default, or their own version if they have also personalized it. See the online help on the Access tab of the Customize Page screen for a description of the privileges.
4. Once that is done, set this page as the default home page for the user. You can do this using the Preferences tab on the edit user screen.
Now the portal user can log into the portal, and personalize his/her page by customizing portlets on the page, hiding/showing default portlets, and even adding other portlets to the page.<HR></BLOCKQUOTE>
null

CProjects for end users

Afternoon all, i've recently installed cProjects as a add on to a WEBAS system, i'm after some useful links/information about how to use the product at all, as i've no real experience of it.
Any help would be much appreciated, the SAP guides don't seem to be suited for end users thats all....

Hello James,
From your post I cannot make out which release of cProjects have you installed (3.1 or 4.0). Any way pl find below the links to the help.sap.com portal which is a detailed guide to cProjects Suite.
cProjects Suite 3.1
http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
cProjects Suite 4.0
http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
Hope this helps.
Rgds
Deepak

SCSM 2012 SSP Permission for End users

Hello Experts,
I have an issues with SSP - SCSM 2012 SP1.
As an admin user, I can see theOfferings, see the pending requests, can see the requests I have submitted, Approve them etc. But when I am an end user, browsing from my laptop, I see a blank Home page. I dont see the Service offerings in the
homepage..even I dont see the Need Help? text. What is the issue? FYI : Silver light is already installed on my laptop.
Interestingly, I see the Need Help? text with the same end user credential when I am opening the browser inside the server wher SSP is installed.
But, in both the cases, whether I browse in the server or from my laptop, I dont see the service offerings anywhere when i am an end user. I followed the below article..but no success.. :(
http://systemcentertech.com/2012/06/28/scsm-2012-portal-service-catalog-empty-for-end-users/
Please help...
Thanks!
Thanks

Hi,
Did you add the Service Offerings and Request Offerings to the Catalog Group? Here is another good blog on this you can reference:
http://www.concurrency.com/blog/scsmportalpermisions/
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Applet Debugging Option for End Users

Users in our 12.0.4 development system that only have the 'xMII Users' role can see and use the 'Applet Debugging' option under the System Management menu. I'd prefer them to only have the options under the Support menu.
I'm puzzled why this one option is availble for end users. What am I missing?
David Macindoe

What am I missing?
I guess nothing.
Its just that it is designed this way. Moreover the option is harmless from a Security point of view.
May be you will find this 'fixed' in later versions.

Training Material for end-users

Hi SAP Gurus,
I need to prepare a Online Quick Reference (OLQR)/questionnaire/FAQ's (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM), for the end-users, which they will refer to after Go-Live.
I also need to prepare training material for end-users for (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM),to be used during the training session's prior to Go-Live.
I would appreciate, if someone could please send me project documents related to the same on my email id [email protected]
This is very urgent and I have to complete the documents ASAP, so please reply at the earliest.
Thank you all in advance.
-- SJ
null

Hi Ravi,
Thanks alot for your help.
But, I was looking for some Project documents that I can refer to for preparing Training Material and questionnaire/FAQ's/online documents (SAP R/3 4.7 -FICO, SD & MM) for the end-users, which they can refer to after Go-Live.
It would be great, if you could please send me some project documents on my email id: [Email removed by moderator]
Thanks,
--SJ
Message was edited by:
Mario Herger

Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
It seems to be considering these items as removable media?
DPM 2012, SP1, version 4.1.3313.0
Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
Affected area: skutter.pmuk.net
Occurred since: 11/01/2013 09:04:43
Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
, atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
, firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
,firebird.pmuk.net_HADPCLQuality , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office ,firebird.pmuk.net_OMPM
, firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8 ,firebird.pmuk.net_Spares
,firebird.pmuk.net_test ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$ ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON ,legion.pmuk.net_SYSVOL
, nemesis.pmuk.net_KEvin ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$ ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
, valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
Any Ideas? backups are OK, recovery points/sync's etc.
Mark.

I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
In DPM I disabled EUR
In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
Delete all of the mappings within the container
In DPM enable EUR
In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
Related article on ADSI Edit and DPM -
http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
I hope this helps
JD Young

Utilizing the Workspace for end users

Trying to see how can I utilize the existing workspace for "end users" who are supposed to access the application, I have two questions:
1- How to remove the extra regions, logos and etc.
2- How to add link to the application
Thanks,
Mehr

I'm not clear on your question, but I'm going to take a wild stab in the dark and think you would like to customise the workspace login
http://www.grassroots-oracle.com/2013/02/modifying-apex-workspace-login-page.html
Why not provide them the appropriate URL in the first place?

Download and Upload Report Layout for End User

hi, i did the following
1. create an xml data file
2. load in in bipublisher
3.create a layout
4. create a report query in apex and load the rtf created in step 3
5. test the report.
it works fine.
my requirement is for trained end users (bipublisher trained) to download the rtf and edit it if need be. most of the editing will be text and they will not be editing any data fields. i will create a button for the end user to download the report layout, but what api can i use to download the rtf for them and where should i move the report layout (any apis for this) upon upload after the rtf is edited by the user.
thanks
a

hi check this document
http://docs.oracle.com/cd/E21764_01/bi.1111/e13880/T539768T526688.htm#5851577
http://docs.oracle.com/cd/E21764_01/bi.1111/e13880/T539768T526688.htm

Use of contribute for end users

I am new to the Adobe world and have searched for this answer
on this forum without luck. Pardon if this question sounds silly,
but does contribute need to be installed on every machine you do
edits on via this application? Or can it be installed on the server
and it allows the user to access the app that way to do edits to
the website from any browswer on any connection?
Thanks

Thank you for replying!
As a conclusion so far, there is nothing available out there that can solve this for us easily. We do have all the information available in SWI1 etc, and will have to go through the nitty griity job of developing reports and presenting them in the portal. I can imagine we might have a challenge presenting the reports in a understandable way for our end users.
Anette

CSV upload for end user

I've searched all over the web and this forum and haven't found exactly what I'm looking for. I see this referenced a lot (http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/), but it's still a little too technical for me to figure out.
Is there a packaged app or a dumbed down "how to" for creating a csv upload? I want the end user to be able to upload a csv file (same columns/headings, but the number of rows will vary) and display the table they just uploaded in a report.
Thank you!!

Hi Bob,
Where exactly are you stuck? In the example that Tony linked, all you have to do is modify ~line 53 to the number of columns that will go into your table (and the name of the file browse item).
i.e.
APEX_COLLECTION.ADD_MEMBER(
                            p_collection_name => c_collection_name,
                            p_c001 => v_curr_row(1),
                            p_c002 => v_curr_row(2) -- add more of these for the number of columns that will be in your csv file);Or does the example not meet your requirements? If I interpret correctly, you want the user to be able to upload a file where they have specified the column names at the top of the csv file? I have created an example using this technique, although I am not entirely happy with it yet (for the lack of confirming the data that is to be inserted).
Ta,
Trent

Automated reporting on dataloads for end-users

Similar Messages

Maybe you are looking for