Automated server-based multicast session won't repeat without help

When I set up an ZENWorks Imaging multicast session on a server using
ConsoleOne, the session is no longer checked after the multicast session
runs.
I manage a fairly large school envrironment, and am trying to automate the
process of setting up an unattended daily imaging session in a computer lab
using ZfD 4.01 (fully patched). Wake-on-LAN is working fine, and PXE is
working fine, but the imaging only happens if the checkbox for "Multicast
Sessions Configured for this Server" is checked. Every time it runs, the
checkbox gets UN-checked!!!! AAARRRGGGHHH!!!!
The whole point of doing this is to eliminate the need for manual
intervention! I've never seen this issue discussed anywhere, and it's
driving me nuts. Is there a place I'm overlooking where this can be
changed?
Thanks,
Roger

How would one go about doing the LDAP thing?
Thanks,
Roger
"Marcus Breiden" <[email protected]> wrote in message
news:1qk3gk7uuaq4d$.[email protected]. .
> On Mon, 08 Jan 2007 19:53:11 GMT, Roger Kresge wrote:
>
> > The whole point of doing this is to eliminate the need for manual
> > intervention! I've never seen this issue discussed anywhere, and it's
> > driving me nuts. Is there a place I'm overlooking where this can be
> > changed?
>
> nope, only option is either to use ldap or similar to set the checkbox
back
> or to get zwake from www.engl.co.uk
>
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my
e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Similar Messages

Multicast sessions page of server properties

I am using ZEN 4.0.1 ir7, Netware 6.5sp4, ConsoleOne 1.3.6e.
I was creating multicast sessions on the multicast sessions page of server
properties for later use by my technician. I had created 5 sessions, then
closed the property page. Then later I went back to make changes on one of
the sessions. When I attempt to open that tab I get the message 'Loading,
one moment please...', and there it stays. I have to kill the ConsoleOne
process in task manager and restart ConsoleOne in order to do anything.
What's going on, and how do I correct it?

Thanks guys. I started c1 without the zen snapins, then deleted one of the
sessions from the 'other' tab. Then I put the zen snapins back in and was
able to view the rest of the multicast sessions. Kind of screws up the
linkages in edir doing it that way, but that's fixable.
>>> Kurt Finlayson<[email protected]> 11/5/2006 9:03:10 PM >>>
>Bill Knaack wrote:
>> I am using ZEN 4.0.1 ir7, Netware 6.5sp4, ConsoleOne 1.3.6e.
>>
>> I was creating multicast sessions on the multicast sessions page of
>server
>> properties for later use by my technician. I had created 5 sessions,
>then
>> closed the property page. Then later I went back to make changes on one
>of
>> the sessions. When I attempt to open that tab I get the message
>'Loading,
>> one moment please...', and there it stays. I have to kill the ConsoleOne
>> process in task manager and restart ConsoleOne in order to do anything.
>> What's going on, and how do I correct it?
>>
>
>This sounds familiar. I think this is fixed in a newer version of
>ZENworks but not in ZfD 4.x. You could try a consoleOne containing newer
>snapins of ZDM 6.5 or 7 and see what happens? Just a thought.

Microsoft Forefront Server Protection Eventing Service won't start?

Hi Guys,
When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
Event 465
Source: ESENT
FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
Event 301
Source: ESENT
FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
Event 454
Source: ESENT
FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
Event 1076
Source: FSCEventing
The Forefront Protection Eventing Service has stopped.
Thank you very much!
Arnel

Hi Arnel,
Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
Event Id 465
Hope this helps.
Best regards,
Justin Gu

How can i get session object based on session id?

I have tried searching in forum but i can't find any solution that i can get session object based on session id and i also would like to know how to check whether the session is still active? My company currently using weblogic 5.1. I really hope that some one or anyone can help. I am new in using Servlet. I hope that i can find some answer here. Thank you.

I have a need to get a Session object from a session id, so I don't think that the above should be deprecated. Here is my use case:
0. I am displaying files in a file list
1. I am downloading files.
2. I am downloading files through a Servlet
3. I am displaying the files as images in an applet
4. The applet is ImageJ, and it apparently uses a full URL to download the file.
5. I use request.getRequestURL() in the applet .jsp to get the full URL (the hostname and port)
6. My app server is OC4J and it's behind an apache server and is host aliased.
7. Thus the hostname is different between my applet .jsp and the Servlet URLs
8. Thus I have 2 different sessions
9. Thus I need to pass the session id (or some other unique identifier).
10. I could stored the unique identifier in the application object, but then I would need to clean it up
11. I cannot pass the the full path to the image due to security problems (what if someone downloads my password file?)
12. I would like this to work in a clustered environment
13. I think that WebDAV would solve my problems, since I could pass a full URL of webDAV to ImageJ for download. However, I am unsure how the security of WebDAV would work with ImageJ/URLConnection. I will have to research this feature in ImageJ.

Multicast session doesn't start

Hi,
I use NW 6.0 with lasp SP and ZfD 4.01 IR7. I use ZfD Imaging via PXE.
Now I try configure Multicast imaging, setup Server propertities at NDS
etc.
When I boot workstations to PXE menu, on the screen shows multicast
address (231.X.X.X) multicast name and workstations wait for master to
start multicast.
I define that two stations may start multicast or 5 minutes to start it.
On server console shows Multicast sessions (Zenworks imaging server
staistics) with rights name.
But workstations waits for master and no image transfer from server.
Can you help me ?
Lubomir

> [email protected] wrote:
>
> > But workstations waits for master and no image transfer from server.
>
> hmm... are they on the same switch?
yes
> --
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-
mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

LV5 as ActiveX automation server

Hello,
I hope that somebody here is able to help me. I have a question about using
LabView 5 as ActiveX automation server. This works fine for me when I build
an C++ application based on the examples I got with LabView. But all
examples I found make use of MFC.
Now I have a C application that is based on pure Win32 API. My question: How
can I implement calls to LabView-automation server using Win32 API without
MFC?
Thanks for your help in advance!
Martin Schellenberger.

Whether you are using database logging or not, you should not get an error like that when database options are loaded. From the kb's you specified it sounds like there was an issue with a COM/ActiveX server not getting registered in the past. Especially on machines in which TestStand was installed from a deployment rather than the main installer. Have you tried running the version switcher like the KB suggested? Did it succeed or give an error? If it gave an error what was the error? Could you perhaps try a fresh install of TestStand on a clean machine?
-Doug

I18n for Server-Based JavaHelp Helpsets?

Hi Folk,
Can anyone tell me how can we implement internationalization for Server-Based JavaHelp Helpsets?
As an example, I have below code snippet for Index.jsp and I am invoking JavaHelp from this page.
<jsp:useBean id="helpBroker" class="ServletHelpBroker" scope="session" />
and
<jh:validate helpBroker="<%= helpBroker %>" helpSetName="MyJavaHelp/alarms/Alarms.hs/>
As per my understanding,
In case, I have to support more than one language, then I must have so many .hs files for each lang. But the above( <jh:validate > ) tag accepts only fully qualified url.
Please let me know how to solve this else if you have any alternative.
Thanks in advance.
Pachu

We have sucessfully used javahelp with a custom network protocol handler
to fetch the documentation from specific "packages" in the classpath.
The same technique could be used with a database.
Drop me a line if you're interested in more detail.
Gordan Vosicki

Search for data in server based database.

I have a web page (http://gosolivitahomes.com) where I can enter a search for data in my server based database. If I enter a value less than $100,000 in Min Price I get no response. For values >= $100,000 I get the correct response. Why? Please help.

Yesterday I got no properties under $100,000.
To day I tried again and the first time I got 2 results, but when I went back and repeated the same thing, I got no result.
Then, like John Waller suggested, I cleared my cache and the 2 result were back.
Perhaps your problem is a template or other cms cache issue. I don't know very much about it, but when I had a login problem I had to disable user cache i the cms (Joomla).
I hope you will solve the problem

Can I use System Center 2012 Endpoint Protection in "Windows Server Remote Desktop Session Host" without buy the license ?

Can I use System Center 2012 Endpoint Protection in Azure Virtual Machine Gallary's "Windows Server Remote Desktop Session Host" without buy the System Center 2012 Endpoint Protection license ?
I want to protect my Azure RemoteApp against the malware.
System Center 2012 Endpoint Protection installed Azure Virtual Machine Gallary's "Windows Server Remote Desktop Session Host".
Now, I try to build Azure RemoteApp template by using the Azure Virtual Machine Gallary's "Windows Server Remote Desktop Session Host" .
Regards,
Yoshihiro Kawabata

Hi Yoshihiro,
Unless and until Microsoft modifies the license terms for System Center 2012 Endpoint Protection and/or modifies the Online Services Terms (OST) and/or other document explicitly saying that use is included with the Azure RemoteApp (ARA) monthly
fee I recommend you assume as that it is
not included and license it separately for ARA if that is even possible, which is a separate question.
For licensing it is best to be cautious and make decisions based on the official documents that are available that govern use of the software and services involved. At this moment I'm not able to find a Microsoft document that grants use of System
Center 2012 Endpoint Protection with Azure RemoteApp.
When I first used the gallery template and noticed that Endpoint Protection was installed within it I had the same question as you. I will update this thread if/when I obtain more information.
-TP

How can we restrict EQL result based on session value

How can we restrict EQL result based on session value or by checking with EBS secured function?
Example: I create a Item Search Dashboard but I have more than one inventory organizations and I want to restrict dashboard to bring inventory org respective data by validating responsibility/profile option.
Can anyone help me on this or if my concept is wrong so can anyone please guide me?

Hi Bob,
Thank you. Sorry for the late reply but I was busy in other stuff. I did the jar file and copied that Jar file into .ear/APP-INF/lib and copied on server and updated the df.securitymanager property under framework settings on Endeca Studio and restarted Endeca Server and Studio but seems like my class didn't get read. Kindly suggest and find below snippet of code;
public void applySecurity(PortletRequest request, MDEXState mdexState, Query query)
throws MDEXSecurityException
init(request);
String remoteUser = request.getRemoteUser();
String recordFilterExpression = "XX";
if(recordFilterExpression != null) {
DataSource ds;
try {
ds = new DataSource(request, mdexState.getId());
try {
ExpressionBase expression = ds.parseLQLExpression("FND_USER_NAME='" + remoteUser + "'");
DataSourceFilter dataSourceFilter = new DataSourceFilter(expression);
} catch (Exception f) {
throw new MDEXSecurityException("Unable to apply Expression", f);
} catch (DataSourceException e) {
throw new MDEXSecurityException("Unable to create DataSource", e);

Multicast session ends without waiting for clients

Hi..
Using SLES 10 sp1 and Zen 7 sp1 I am trying to set up a simple multicast to image about 30 pcs. I can pull an image from the server ok but when I try to start a multicast session, the imaging server opens, closes and thinks it is happily done. I used the command:
/opt/novell/zenworks/preboot/bin/novell-zmgmcast -mcast aa -p /home/images.base01.zmg -i 172.29.16.2 -c 3 -t 10
Running .../zimgmcast -status results in :
Update requests: 0
Images sent: 7 (Incremented by 1 over the last time I tried it.)
Images received: 0
Client Referrals: 0
Running .../zimgmcast -list returns:
There are no multicast sessions currently.
The debug log says:
[MPM] MCA failure -103
[MPM] no clients
[MBS] Session done, 11, 0
(sorry, the imaging server is isolated from the network and I can't copy and paste anything.)
Any idea what this failure is?
Thanks..

I know this is an old post but was wondering if you ever resolved this issue? I'm having the exact same issue with the same -103 error code on my SLES 10 server and Zen 7.
Originally Posted by dherde
Hi..
Using SLES 10 sp1 and Zen 7 sp1 I am trying to set up a simple multicast to image about 30 pcs. I can pull an image from the server ok but when I try to start a multicast session, the imaging server opens, closes and thinks it is happily done. I used the command:
/opt/novell/zenworks/preboot/bin/novell-zmgmcast -mcast aa -p /home/images.base01.zmg -i 172.29.16.2 -c 3 -t 10
Running .../zimgmcast -status results in :
Update requests: 0
Images sent: 7 (Incremented by 1 over the last time I tried it.)
Images received: 0
Client Referrals: 0
Running .../zimgmcast -list returns:
There are no multicast sessions currently.
The debug log says:
[MPM] MCA failure -103
[MPM] no clients
[MBS] Session done, 11, 0
(sorry, the imaging server is isolated from the network and I can't copy and paste anything.)
Any idea what this failure is?
Thanks..

Please Help...Itunes Automation Server problem

It installs up to the point where it says "Registering Itunes automation server", it freezes on the last bar and then says "cannot run cuz some of itunes required files are missing...reinstall"...but it won't. Can anyone help?
Thanks

You will need to import all your songs to the laptop first. Then, connect your
iPod. Select Erase and Sync. This will remove all the files from you iPod (SO
BE CAREFUL YOU HAVE YOUR SONGS ON THE LAPTOP). Then start over, like you did
when you first got the iPod. Sync it with the laptop.
What I would do, is go to your first computer and burn a DVD of all your songs.
Then on the laptop, do an "Add Folder to Library" in iTunes. Make sure your
iTunes is configured to "copy files when importing". After that, your laptop
should have all the files that you had on your old computer, on it. Generally,
you can't copy from the iPod to the computer. There may be 3rd party apps that
allow this, but not built in to iTunes.
Leave the songs on the old computer, incase things go bad. You can always
re-init the iPod and go back to the original computer and re-sync.
Good luck. Hope this helps.

LabVIEW Run Time Engine and ActiveX Automation Server

Hi,
I have a question related to LabVIEW Run Time Engine and ActiveX Automation Server:
We have a tool developed in LabVIEW and TestStand. End user interface is a LabVIEW GUI (it's an executable) which executes TestStand sequences. Some TestStand sequences call lower level LabVIEW VIs.
Everything works fine with LabVIEW installed, but I was wondering if I could run this tool on deployment machine with only LabVIEW run time engine installed. We are using LabVIEW 6.1 and with only the run time engine installed, I get the error message: "Unable to launch the 'LabVIEW.Application' ActiveX automation server ".
BTW, we are planning to upgrade the versions soon.
Is it possible to make things work only with the run time engine?
Thank you.

Thanks for the response, Brian.
I did upgrade to LabVIEW 8.0 and TestStand 3.5. Everything works fine on the development computer where LabVIEW and TestStand is installed. On the target computer in the lab, I installed LV RTE 8.0 and TestStand 3.5, and now when a VI is called in a sequence file, I get the following:
RunState.PreviousStep.Result.Error.Code -18002
RunState.PreviousStep.Result.Error.Msg "LabVIEW: The VI is not executable"
So, the executable opens and works fine (which means that the LV RTE is installed properly), but when a sequence calls a low level VI, it does not make it through.
comments/suggestions are appreciated. Thanks.

Referencing a "locally installed" Java applet from a server-based HTML page

How does one reference a "locally installed" Java applet from a server-based HTML page (i.e. via the applet, object, or embed tags)? I have seen references in documentation that this is possible, but I have not seen any examples. I have tried a few things, but nothing seems to be working.
Some background...
I'm working on a web site that aggregates Internet video. For many users, I would like the site to work "without" requiring Java to be installed (or any prompts, etc.). This version of the site allows users to stream videos directly over the Internet and does not require any sort of access to the local system.
However, in addition, I have a download manager that can be installed on the local system. Currently, it's a Windows-based "service" that is always running in the background, downloading files, etc. (with plans to later support other OSes).
My dilemma is trying to communicate between my web site running in the local browser (executing JavaScript code) and the download manager. I call this component the "gateway". I need the gateway to be able to do the following:
1) Pass user credentials from the web browser UI to the download manager (so it can communicate with my servers).
2) Check the status of downloaded videos
3) Launch a local media player (such as Windows Media, QuickTime, etc.) (or perhaps tell the download manager to launch the media player).
Under Windows XP, I have an ActiveX control that can do these things. It communicates with the download manager via reading/writing to a shared XML configuration file.
Unfortunately, under Vista and IE7 Protected Mode, ActiveX controls have become very restricted and my gateway no longer works. As such, I am looking at using Java for the gateway (also giving me the additional benefits of supporting additional browsers and OSes).
From my understanding, I believe I can created a "face-less" Java applet, whose methods can be called from JavaScript. Ideally, I'm thinking I could install the applet onto the local system at the same time the download manager is installed. This would give the applet the security permissions it needs to communicate with the download manager.
Thanks for any help and suggestions!

Hi,
Put the .jar file and the .class file in the path mentioned in one of the aliases in the plsql.conf file like /images or create
a seperate directory and create an alias like /applets "path" in the plsql.conf file.
<html>
<body>
<applet code=com.chartapplet.chart.BarChartApplet
codebase=/applets/
archive=/applets/chart.jar width=300 height=200>
<param name=background value="white">
</body>
</html>
Hope this helps.
Thanks,
Sharmila

Creating server based folder on mac/me IMAP- Problem!!!

I'm having a problem creating an IMAP server based folder to sync with my iphone.
I can create one for my personal domain email account, which, when sync via itunes appears in my mail app on the iphone.
But when I try to create one for my .mac/.me account, it does not appear in my Mail app on my computer, let alone on my iphone.
I click the '+' at the bottom of the left hand pane, click 'new mailbox' and then using location 'mac', with the nice picture of the cloud, enter the name I'd like it to have.
Can anyone tell me what I'm doing wrong, or do I have a bug?
Thanks
Al

http://www.biscade.com/2010/09/bootable-macpro-raid/

Automated server-based multicast session won't repeat without help

Similar Messages

Maybe you are looking for