Automatic Acceptance

Hi QM Experts,
In my solusion, I create inspections lots from PM Orders. Each inspection lot has multiple equipments as inspection points. Currently in QE51N I go to each inspection point and either Accept or Reject. Based on that the usage decision is defaulted. At the end I associate the usage decision to the entire inspection lot.
I'm looking for a soluiton where I only mark the Rejected inspection points (which is very less) and rest are Accepted AUTOMATICALLY. Is there a way to do that?
Cheers
Deepal

Hi Sujit,
thanks for the reply,
but could you please elaborate below section (e.g. where to do the change etc)
In Operation overview screen in routing---->Select Quality Mgt Inspection points------> 3.Automatic valuation depending upon inspection point definition.
Cheers
Deepal

Similar Messages

Automatically accept screen sharing from specific user ???

My mother is a newbie mac user. To be honest, she's a newbie computer user - full stop. She did inherit my PC laptop when I switched, but within a week she had crashed it. The mac she has is still running. (And guess who got it for her. I'm a good daughter.)
Anyway - her G4 Powermac is running Leopard like a dream. In fact it is much faster now than before. Still, she has a few issues. Like the other day, she couldn't get music through her speakers and I'm abroad at the time.
I asked her to accept a screen share, she did. I fixed the speaker issue and closed the screen share. She is happy as larry. But that got me thinking. Is it possible to automatically accept screen share from certain users? That would be a great help if that would be possible.
Thanks in advance.

Musicsites, here is your answer. Just follow the instructions completely and it will work quite well. I have it running and it allows my iMac to automatically answer incoming Screen Sharing requests ONLY from my MacBook.
<http://www.getstonered.com/2007/11/applescript-automatically-accept-ichat.html>
Mike

How do i stop Calender invites from automatically accepting?

When i recieve a Calender invite it is automatically accepted?

My fault, this is only to sound the alarm if you get an invite. I don't get invitations, because I did not subscribe to any calendars. This seems to be the only way not to get some.
But there is a "respond" button right next to the Mounth view button, did you try this one?

Automatically accept FaceTime calls on my Mac OS X Yosemite, 10.10.2 from a specific phone number

I would like to be able to call my Mac FaceTime and have it automatically accept my call so that I can check on my puppy. I tried using the Terminal and typing in syntax that I had seen on other forums, but it didn't work.
Please help! I need foolproof instructions because I'm not all that tech savvy.

Maybe some 3rd parties tools?
Example: http://www.evological.com/evocam.html

Automatically accept invitations in iCal?

Hi,
I'm running a MacMini as private fileserver in our family. I want to use iCal to collect dates and meetings of our family. Ical will then publish this calendar automatically on .mac so that we can see all dates from every pc or location.
I have set up a certain mail account that the MacMini uses. If my wife or I send an invitation from our Outlook at work to this mail account, the MacMini receives it automatically and puts it into iCal.
Now the missing piece: I want iCal to automatically accept those inivitations, so that the published calendar on .mac is uptodate without user interaction. Outlook offers such a feature, iCal not. So - is there any tool or hint to solve my problem?
Best regards from Germany,
Heiko

They sent an invitation through their meeting invite feature.
Meeting invitations to myself are fine. I believe this is an issue between Apple and Microsoft, though I'm not sure why this is an issue in the first place because both should be complying with the iCal standard (the meeting format standard, not Apple's program).

Since IOS 5 my calender which syncy with google automaticly accepts invitations. Any known error, workarround ?

My calender on iPad and iPhone syncs with google calender.
Since i sync my Outlook as well with some tools, i will stay with google and not switch to iCloud (i use fotostream, email, ... However).
Since IOS 5 email invites for dates are automaticly accepted and silently synced into the calender.
Same storry with my Girlsfriends iPhone and a friend.
Is this a now bug for apple ? I was not able to find the knowledge base through the website any more... ?!?
Any advice, bug fix ?
Cheers,
Ralf

Skype to automatically accept calls on android pho...

I want my samsung android phone to automatically accept Skype calls and preferably from a specific Skype account.
I tried the automatic feature on the phone preference but the phone here would automatically launch however without video.
Help needed

Device: Samsung S5 unlocked / 32GB SM-G900HAndroid version: 5.0Skype version: 5.6.0.12393

Automatically Accept Incoming Contact

By default, when IC receives an incoming contact (call, email, etc) from a CMS such as Genesys, Avaya, etc., the Accept button in the toolbar will blink and the agent will have to click that button to initiate the interaction.
In Maximizing Your SAP CRM Interaction Center, however, it states on page 56 that the system can be configured to either automatically accept the incoming telephone call, or to prompt the agent with blinking accept and reject buttons.
I'm trying to figure out where within SAP this option can be configured. Normally I would be able to configure such a capability within the CMS, but there is a switch limitation that prevents it in this case, so configuring SAP to automatically accept the interaction is the only option we have.
Can anyone point me to the right location to configure this?

I do not use Genesys but found several places where the subject has already been mentioned, maybe they can inspire you:
- Auto answer call SAP CRM with Genesys (G+) : http://scn.sap.com/thread/3182272
- Genesys forum / auto answer call : https://forums.genesyslab.com/showthread.php?t=5988
Hope it helps,
Eli

Automatic acceptance of Service entry Sheet

Hi,
We have requirement like whenever the service entry sheet create automatically through CATM it should get service acceptance automatically

I think this is not possible through std SAP but you can use the user exit SRVESSR
to accept the service in background once it is generated through CATM.

Automatic acceptance of appointments in Outlook when using GW Integration

Hi,
we use Groupware Connector 2.0 with CRM 4.0.
Here it is the case thatif you create an appointment in CRM this appointment is sent to Groupware to the calendars of the participants. If ou create an appointment manually in Outlook, all invited people get a Mail and can decide if they want to accept the appointment or not. If it is an CRM activity, this mail is answered automatically and the appointment is fix in one's calendar.
Does anybody know if there is the possibiliy to change this behavior so that all invited persons also get a mail first that they can accept or not?
Thanks a lot and best regards,
Katharina

I found it out by myself, it's a setting in the groupware connector.

Automatically accept VeriSign certs?

Hi all. I'm pretty new to SSL so any help with this question would be appreciated.
I have a web service app running on a WebLogic 10.3 server (let's call it ServerA). This web service app also contains a web service client to make calls to another web service app running on another server somewhere (let's call it ServerB).
ServerB is beyond my control, but happens to be behind the same firewall as ServerA. For my app on ServerA, I've been asked to "auto-accept the connection (trust VeriSign)" when making a web service call to ServerB. I believe this is to avoid certificates expiring, but I may be wrong.
Can anyone tell me how (either in the WebLogic console or in my Java code) to automatically trust VeriSign certificates?
Forgive my ignorance on this subject. It's my first time working with SSL.

You probably want to also try the security forum:
WebLogic Server - Security
Specify whether you are using just 1-way SSL (where this should work without intervention I believe using the CA list with the JVM). If you're using 2-way SSL, then I think you'll need to do some key importing.
You should really consult someone who understands security requirements in your environment on what they want, as this is something you really want to get right and not misconfigure.

Automatic Accept or Rejection for Copy Inspection Result setting?

HI Sir,
Control in Insp. Lot - Automatic Data Transfer at Sample Calculation.
Control in RR - Automatic Data Transfer When accessing Results Recording
Close - Make Tick mark
Origin TL - No setting
DatOrig.RR - 02
Selection - 300
Mapping - 200
Log - Make Tick mark
above settings has done
Results also copied .
But I want copy Accept And Rejection .
This is possible? Give me the suggestion
Regards,
Naresh Reddy Nandi

Hi,
Acceptance or rejection varies for every lot. You can't cope the accept or reject while accessing the results recording. Thanking you.

Automatically accepting file transfer via Bluetooth?

I'm often sending files from my cellphone to the Mac.
Alas, for each file I must again click "accept" in the Bluetooth File Exchange dialog. It is especially annoying since sometimes I do not even sit in front of the computer and just want to clear my phone's memory from afar.
Is there any way to have the files accepted to be received automatically?
Thanks!

What you need to do is the following:
On your blackberry: Browse to Media, and select, pictures (for example), now press the menu button while in pictures and select "receive using Bluetooth" Now send a file from your mac using the bluetooth file transfer. This will work - if it doesn't then there may be an issue with either your mac or bb. Let me know if you need further instructions. Good luck.

How to automate accept client of the server side?

Hi.....
I am a beginner of using J2ME to developing my final year project. I have some problem of using bluetooth packet. I can't accept again the client message when the server accepted before. Any one can solve my problem? How can I using the loop or timer to accept the client message without using acceptAndOpen() packet? Thank a lot.....
The sample code is here:
- Server side
public class BluetoothServer implements Runnable {
     private GameMIDlet gameMIDlet;
     private HandleSetting setting;
     private HandleScore score;
     private ScreenGame screenGame;
     private int playerMethod;
     //private GUIGameServer guiGameServer;
StreamConnectionNotifier notifier;
StreamConnection conn;
LocalDevice localDevice;
ServiceRecord serviceRecord;
InputStream input;
OutputStream output;
private boolean isInit;
private boolean isReady;
private static String serverUrl = "btspp://localhost:" + ScreenMultiPlay.SHARE_UUID + ";name=GameServer;authorize=true";
public BluetoothServer(GameMIDlet gameMIDlet,HandleSetting setting, HandleScore score, int playerMethod) {
     this.gameMIDlet = gameMIDlet;
this.setting = setting;
          this.score = score;
          this.playerMethod = playerMethod;
     isReady = false;
isInit = false;
Thread accepterThread = new Thread(this);
accepterThread.start();
public void run() {
if (!isInit) {
// Initialization is done in the thread to avoid dead lock 'isInit' ensures it is done once only
try {
conn = null;
localDevice = LocalDevice.getLocalDevice();
localDevice.setDiscoverable( DiscoveryAgent.GIAC );
notifier = (StreamConnectionNotifier)Connector.open(serverUrl);
} catch (BluetoothStateException e) {
System.err.println( "BluetoothStateException: " + e.getMessage() );
} catch (IOException e) {
System.err.println( "IOException: " + e.getMessage() );
isInit=true;
System.out.println( "Starting Echo Server" );
try {
System.out.println("\n\nServer Running...");
isReady=true;
if (isReady) {
     try {
                    screenGame = new ScreenGame(this.gameMIDlet,this.setting,this.score,playerMethod);
          screenGame.start();
Display.getDisplay(gameMIDlet).setCurrent(screenGame);
               } catch(Exception e) {
                    gameMIDlet.showErrorMsg(null);
// Pauses thread until Transmission occurs
conn = notifier.acceptAndOpen();
// Read Data Transmission
String msg = ScreenMultiPlay.readData(conn);
System.out.println("Received Message from Client: " + msg);
// Send Back a Message
msg = "Hello Back from Server";
output = conn.openOutputStream();
output.write(msg.length()); // length is 1 byte
output.write(msg.getBytes());
output.close();
} catch (Exception ex) {
System.err.println("Bluetooth Server Running Error: " + ex);
public void destroy() {
//isClosed = true;
// finilize notifier work
if (notifier != null) {
try {
notifier.close();
isInit=false;
} catch (IOException e) {} // ignore
// wait for acceptor thread is done
/*try {
accepterThread.join();
} catch (InterruptedException e) {} // ignore*/
-Client side
class BluetoothClient implements DiscoveryListener {
     private GameMIDlet gameMIDlet;
     private HandleSetting setting;
     private HandleScore score;
     private ScreenGame screenGame;
     private int playerMethod;
private DiscoveryAgent discoveryAgent;
private RemoteDevice[] remoteDevices;
private UUID[] uuidSet;
private String serviceUrl;
public BluetoothClient(GameMIDlet gameMIDlet,HandleSetting setting, HandleScore score, int playerMethod) {
this.gameMIDlet = gameMIDlet;
this.setting = setting;
          this.score = score;
          this.playerMethod = playerMethod;
try {
LocalDevice localDevice = LocalDevice.getLocalDevice();
discoveryAgent = localDevice.getDiscoveryAgent();
discoveryAgent.startInquiry(DiscoveryAgent.GIAC, this);
//-----go to deviceDiscovered()-----------------
} catch (Exception e) {
System.out.println(e);
public void deviceDiscovered(RemoteDevice btDevice, DeviceClass cod) {
try {
// Get Device Info
System.out.println("Device Discovered");
System.out.println("Major Device Class: " + cod.getMajorDeviceClass() + " Minor Device Class: " + cod.getMinorDeviceClass());
System.out.println("Bluetooth Address: " + btDevice.getBluetoothAddress());
System.out.println("Bluetooth Friendly Name: " + btDevice.getFriendlyName(true));
// Search for Services
uuidSet = new UUID[1];
uuidSet[0] = ScreenMultiPlay.SHARE_UUID;
int searchID = discoveryAgent.searchServices(null,uuidSet,btDevice,this);
//-------------go to inquiryCompleted()----------------------
} catch (Exception e) {
System.out.println("Device Discovered Error: " + e);
public void inquiryCompleted(int discType) {
System.out.println("InquiryCompleted");
//---------------go to servicesDiscovered()------------------------
public void servicesDiscovered(int transID, ServiceRecord[] servRecord) {
System.out.println("ServicesDiscovered");
// in this example there is only one service
for(int i=0;i<servRecord.length;i++) {
serviceUrl = servRecord.getConnectionURL(0,false);
//---------------go to serviceSearchCompleted()--------------------
public void serviceSearchCompleted(int transID, int responseCode) {
if(responseCode == SERVICE_SEARCH_ERROR)
System.out.println("SERVICE_SEARCH_ERROR\n");
if(responseCode == SERVICE_SEARCH_COMPLETED) {
System.out.println("SERVICE_SEARCH_COMPLETED\n");
System.out.println("Service URL: " + serviceUrl);
StreamConnection conn = null;
try {
     String msg = "Say Hello World";
conn = (StreamConnection)Connector.open(serviceUrl);
OutputStream output = conn.openOutputStream();
output.write(msg.length());
output.write(msg.getBytes());
output.close();
System.out.println(ScreenMultiPlay.readData(conn));
} catch (Exception ex) {
     System.out.println(ex);
} finally {
     try {
     conn.close();
     } catch (IOException ioe) {
     System.out.println("Error Closing connection " + ioe);
if(responseCode == SERVICE_SEARCH_TERMINATED)
System.out.println("SERVICE_SEARCH_TERMINATED\n");
if(responseCode == SERVICE_SEARCH_NO_RECORDS)
System.out.println("SERVICE_SEARCH_NO_RECORDS\n");
if(responseCode == SERVICE_SEARCH_DEVICE_NOT_REACHABLE)
System.out.println("SERVICE_SEARCH_DEVICE_NOT_REACHABLE\n");

This question isn't logical at all. You don't execute javascript on the server. But if you want to waste time on it. .. look at Rhino http://www.mozilla.org/rhino/
Best of luck...

Automatically Accept meeting participants

Very often I will notice that someone has been waiting
outside the meeting for a while, and I feel awful. I wish I could
tell the program to just let in anybody who wants to join without
me having to click Accept. I can't imagine having a problem with
people trying to sneak into my meetings. (Seriously, they're not
that exciting) I can't find this anywhere in the settings. Does
anyone know if this feature exists?

Make the meeting room public. In the Manager side of Connect
select the meeting room then edit information and select the radio
button "anyone who has the URL can enter the meeting room". You
will then not have to accept anyone into the room, they will just
enter after giving their name.
Jorma@RealEyes

Automatic Acceptance

Similar Messages

Maybe you are looking for