Automatic adjustments - Adjustment level not working

Hi all
I have got some basic consolidation rules using the rules tables but as soon as i try and control the order in which the rules are executed using the Automatic adjustments - Adjustment level field, the stored procedure produces the error below:
Any help would be appreciated
Byron
TOTAL STEPS 1
1. Execute formulas: Failed in 6 sec.
2. Legal Consolidation: completed in 6 sec.
[Selection]
(Member Selection)
Category: ACTUAL
Time: 2010.P16
ConsoScope: C_ENGEN
[Messages]
Execute formulasError
SPRunConso Version 7.0.116
Warning : Nothing Extract From Ownership for OPENING Period
*ERROR* CSD-150 Problem extracting Data : C_REPART
*ERROR* CSD-160 Problem extracting Data : C_CONSO
*ERROR* CSD-150 Problem extracting Data : C_REPART
*ERROR* CSD-160 Problem extracting Data : C_CONSO
10000015 - 2498 Rows Calculated
10000015 - 0 Rows Updated

Hi Nilanjan
I have 2 rules in the Automatic adjustments table:
In short, Rule 1 should be executed first as Rule 2 should be based on the results of rule 1.
Rule 1: Non Group part cancellation for Proportionate units
Adjustment level = 0
Adjustment type = Proportional
Rule 2: Inter-company elimination
Here the adjustment level = 1
Adjustment type = Generic
When i run the following stored procedure:
*RUN_STORED_PROCEDURE = SPRUNCONSO(%APP%, %CATEGORY_SET%,%CONSOSCOPE_SET%, %SCOPETABLE%,%LOGTABLE%)
The correct results are posted but the package displays as failed with the error message as per the first message in this thread.
The help states the following, which is exactly what i need:
Adjustment level
This field must contain an integer value ranging from 0 to 99 and can be used to order the sequence of execution of the various ELIM rules, if desired.

Similar Messages

Adjusting Levels not working, please help. Photoshop CS3

Anyone have an answer for me? Tech support NOT helpful unless I dish out even more money! Using Photoshop CS3. I am trying to adjust the levels on a very simple bitonal scan from PDF. When I adjust them by going to, Image, adjustments, levels, the preview of it works and it shows what I want, but when I hit OK, it dissapears. If I go to Layers, New Adjustment Layer, Levels, it shows up fine until I save it.. I am trying to save it as a PDF file, and I am saving it with Adobe 6 (1.5) because of compatibility issues (so I've read), it should save layers. But its not saving. Or maybe it's not opening in my Adobe Acrobat? is there an update I need or something? Is there a step I am missing? is anyone else having this problem? Even so, the Level adjust should work regularly while in PS CS3.
THANK YOU!!

make sure you're viewing the preview at 100% zoom. any other zoom level isn't going to give you a true representation of the adjustment you're making...

Adjustment Brush not Working

in the Develop module my adjustment brush is not working, all the other sliders work, what is wrong?

Are you moving the sliders with the "pin" for your brushed area selected? When the "pin" is selected, it looks like a black circle surrounded by a very light gray circle and then a very thin black circle, like this:
What numbers do you move the sliders to?
Did you accidentally turn off the brush adjustments? The little doohickey highlighted in the red box, shown here, should be in the top position
Lastly, I am asking you to perform a very specific experiment, and report the results, and it does not appear that you have done so, or at least, you have not stated clearly that you have done so.
Please, click on "New" in the brush tool, then set Exposure to -4 and Flow to 100 and Density to 100, and brush. Report what happens.

Adjustment brush not working in camera raw cs6

The adjustment brush in Camera Raw PS6 is not working properly. The slider makes a slight change but I can do no local adjustments. All other parts of Camera Raw seems to be working. I have restored the computer. Is there a toggle I do not know about?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Adjustment layers not working in CS4

I just installed Photoshop CS4 and I can create an adjustment layer, but the editing box for that particular adjustment layer does not come up. It works just fine in CS3 on the same computer. I have a G5 (non Intel). Any ideas why this is not working?
Thanks, Beth

Look at the Adjustments Panel.. new in CS4. Window > Adjustments
There are no dialog boxes anymore.

Layout adjustment sometimes not working

I'm in a bit of a panic here. We've set up a file that we're due to deliver to a client today, the file has multiple master pages with various margins.
Normally in this type of situation we turn on the layout adjustment so that the text frame moves with the margins when the new master is applied. Normally this works just fine, we use it all the time, but for some reason its randomly NOT working! i.e. the text frame stays the size it was.
There doesn't seem to be any ryme or reason to it, sometimes its a left page, sometimes a right page.
Any ideas?
Thanks,
Ken

Yeah, I tried. Nothing seems to work all the time as is usually does.
I'll have to look again and see if I can find some correlation with the
pages that do not adjust.
Oy!
Thanks again

Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORK

:Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORKVHello!
I do possess this MP3 Player (with integrated speakers) for more than 2 years now and have never been using the Automatic Shutdown function of the player (in the menu settings). Yesterday, I went to bed, wanted to listen to some music and tried out this function the first time, but it did not work. I tried it with 5, 0 and 30 minutes. What am I doing wrong or is this setting just a joke?
I am using the current software/firmware and am not a newbie to technical instruments so I do know how to - theoretically - start this function by going to setting - Automatic Shutdown - scrolling to the minutes I want to have - Enter/Confirm with the middle ball-knob at the front of the player.
Maybe some of you might help me, I would highly appreciate that.
Kind regards
Guyfromgermany

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Enforcing attachment to process level not working

I am trying to attach attachments (doc, pdf etc) at process level from task form but it goes to task level some how. I was able to verify that by looking into WFATTACHMENT table.
UI side
<af:selectOneRadio value="#{bindings.attachmentScope.inputValue}"
label="#{resources.UPLOAD_TO_PROCESS}"
id="uploadToProcAttach"
I am making sure attachmentscope is going as 'BPM' not 'TASK' by binding to my own managed bean and set scope to process level.
This is working because if I do URL instead of desktop file then URL attaches to process level. I verified this too by looking into WFATTACHMENT table.
So not sure why
addAttachmentBean.uploadFile no matter what attaches pdf, doc etc attachment to task level and also notices that WFATTACHMENT table has row for this record with taskID as something like f76a60ad-53f2-40dc-ac75-af53d64854e4 instead of taskID as process instance Id like 4000001.
I am using Oracle BPM 11.1.1.6.0 PS5.
Attaching URL to process level from a task is working but from the same task attaching real doucment to process level goes to task level.
I am not using UCM.
I really appreciate any inside.

Finally, I was able to solve this issue.
Project was migrated from Oracle BPM PS4 to Oracle BPM PS5 so some how human tasks created in earlier version were not working in new version for new functionalities (adding attachment to process level). When I deleted these human tasks and recreated in newer version. Everything started working great.
I am not sure it is Oracle bug issue or what....

Zoom level not works on horizontal orientation

Hi, i've this issue : when i set crystalReporViewer.zoom(2) on a report with horizontal orientation, zoom not works. If i set vertically orientation, my zoom level is applied.
Thanks !

Hi Paulo,
It's not clear in the steps you are using. Are you setting the zoom level first before previewing or setting the zoom after previewing?
First post you said you were setting zoom to level 2, now you say you are setting zoom to level 300????
And Horizontal is Landscape and vertical is Portrait correct?
If you set the Zoom to 300 % you will have to scroll across, horizontal bar should be enabled.
If I set it to 1 then it fits the width:
This is a landscape report.
Don

Automatic approval workflow does not work anymore

Hi,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- We applied a new SP (SP07) not that long ago.
- These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Kind regards,
Tim

Hi Balaji,
In SRM 7.0,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Regards,
Shears

Privledge level not working

Guys and Gals,
I need to allow a level 9 user in my switches the ability to manage interfaces f0/1 to f0/44 but NOT
interfaces f0/45 thru interface f0/48 (these are trunks). Any Idea why this does not work...
privilege interface level 8 switchport port-security max
privilege interface level 8 switchport port-security mac stick
privilege configure level 15 interface f0/45
privilege configure level 8 interface f0/8
privilege exec level 8 config t
privilege exec level 6 show interface
privilege exec level 6 show run
thanks !

We are doing similiar but I believe you do not have the ability to go more granular then the interface.
privilege configure level 8 interface
Provides access to all interfaces but the command doesn't seem to be able to differentiate past that point. Might be able to do it using a TACACs server though.

I have LR 3.4 & 3.6... Adjustment Brush not working

I have LR 3.4 & 3.6... The adjustment brush is not working... I see people are having problems with LR 4 and are removing the preferences thing, but I don't see anything about LR 3 with this happening... I have it on my laptop and it doesn't work... So far the PC upstairs is still working... so not sure what happened on the laptop...
How do I fix it here?

There's no effect when I brush over the area.
I've tried exposure, brightness, teeth whitening and iris enhance... None of the changes they should make are showing...
I will try to remember to get a screen shot of the panel tomorrow when I've got the laptop again.

Automatic purging in HDS not working

Hi,
In my lab environment for POC, automatic purging for HDS database is not working even though registry values have modified accordingly. Only few tables get purged and not for Termination Call Detail and Route Call Detail tables.
Thanks and Regards
Suresh

Hi uma,
check your sdm logs , you may find some error over there because after successful activation thats the place where your deployment is started on, so check like the sdm password is working . Also to test this deploy small test webdynpro application from nwds directly using sdm password. If this is successful ,check your NWDI memory and also the server on which your portal dev.you should have enough space on this.
Thanks,
pkv

Adjustment Brush not working correctly

Since moving to LR 5.6 the adjustment brush has not worked correctly.
I am unable to adjust the size of the brush using the scroll function on my Mac mouse.When I try to do this I can see the slider moving indicating the size of the brush but nothing actually happens.When I try to adjust it using the slider itself again nothing happens.
Has anyone else experienced this problem or can you offer some advise please

The ACR plug-in files for PS-CS6 and PS-CC are in different folders, but the camera profiles and lens profiles are in a common folder. Since updates to ACR are typically handled by the product, itself, not direct-link downloads that you must have saved for ACR 7.1, I don’t know what the error means in relation to CC having a newer ACR.
What version of ACR did you have installed for CS6 before you tried to update to ACR 7.1? Are you trying to downgrade from a higher version of ACR on CS6?
The first thing I would try is install ACR 8.3 RC for PS-CS6, using the CS6-specific link at Adobe Labs.
If you really need to go back to an earlier version of ACR, then the Adobe-approved method is to uninstall PS, entirely, then re-install it to get the older version.
It may be that you have to uninstall both CS6 and CC and then install CS6, first, and get it updated the way you want it, then install CC, again, and update it how you want it. That seems like a lot of work, though.
Why are you wanting to install ACR 7.1 for CS6?
If you plan ahead, then the way you can switch between different versions of the ACR plug-in, is to save your Camera Raw.8bi file each time you upgrade (I rename mine so the extension is the version: Camera Raw_8bi.71 and leave them in the same folder), and just replace whatever version of the ACR plug-in with that one you want.

IPhoto '06 "Adjust" button not working

Hey, Gang;
Just loaded iPhoto '06 onto my Dual Core G5, prior to that (the day before) updated to 10.4.4 with no trouble. But I can't get the "adjust" feature to work in iPhoto '06. "Effects" works, everything else seems to as well. I tried adjusting several photos, digital snaps as well as scanned slides but no joy. Any thoughts?
Thanks,
David S.

When I clik on the Adjust icon in iPhoto 6 it is in the very lower left corner of my monitor (not in iPhoto window). There is not enough there to drag to the main window. Does anyone know how to prevent this from happening without restarting the app?
I see in Discussions that others have experienced the problem,
Remedies? Fixes ??
Thanks all.
Bill

Automatic adjustments - Adjustment level not working

Similar Messages

Maybe you are looking for