Automatic assingment of Cprojects to SAP PS project

Hi all,
I am using Cprojects 4.0 and is installed as add on on ECC6.0. I have created a projects in Cproject and wnat to replicate it into SAP PS. I have done all necessary customizations required for account integration and in project type and in controlling scenario.
When I am going to accounting tab in cproject , I can see the tab for assing PS project and Assing WBS element. But when I click on Assign PS project, the projects is not getting assing automatically. I cannot see any project in below space.
The scenario is for automatic assignment. Please help
Thanks and regards,
Hemant Patil

Hi Hemant,
I am a little unclear about your questin.
As far as I understood, you use the automactic assignment, that mean, the PS project & wbs elementen are created automatically. After it runs successfully, you shoud see the assignment between cProject object & PS objects. But why do you carry out action 'click of assign PS project', this action is only relevant for manuall assignment.
Kind regards,
Zhenbo

Similar Messages

"Automatically create a cProjects project when this item is created"

Hi,
In the creation screen (after the item type is entered),then input the 'cProject template ', AND
selection the option, 'Automatically create a cProjects project when this item is created'
(typically in the bottom.)
I need to change the check box to Disabled. can i know the were we need to change?
Please Provide me Field name and Table name.
Regards,
Dhananjaya

Dear Dhananjaya;
Check this thread --> Re: Default values while item create
Best regards;
Mariano

Automatic scheduling of Cproject

Hi All,
We have changed the plan finish date of an item from 31.12.2011 to 31.12.2012. Corresponding Cproject project definition is in Released status. As a part of synchronization the dates on the Cproject project definition changes to 31.12.2012. But the dates are not copied to the lower hierarchy i.e. tasks. We have only tasks under PD.
System message is u2013 Can not update scheduling data
Reason u2013 As the Cproject is in Released status scheduling can not happen automatically. Scheduling should be carried out manually.
How to enable scheduling automatically when the Cproject project is Released. Business do not want manual scheduling of Cproject project.
Regards,
Gaurav

Hi Gaurav,
There's no standard way to activate the automatic scheduling once the project has been released.
You will have to enhance standard class CL_PPM_SCHEDULING / method GET_SCHEDULING_FORCE and force the parameter rv_scheduling_force to abap_true.
Regards,
Matthias

In sap plm projects

hi guru.
in sap plm projects is this necessary , to generate the reports,scripts.
what is exactly sap plm projects,give some idea briefly.because just recently
i got offer for working in sap plm development projects.
help me.
thanks& regards
subhasis

Hi Subhasis,
Are you a Technical/Functional i.e. ABAP/Functional please let me know?
If you are a Technical (ABAP) then you no need to worry about your work in PLM
your work remains same as of ABAP. i.e. you will be working on Function Modules, User Exits, Field Exits, Report Design, Scripts & enhancements etc.
The Objects/Area which you will be dealing are : Document Managment System (DMS), Engineering Change Management (ECM), & CAD Integration yes i forget to mentioned you will be working on "Interfaces" too. and rest in PS or CProjects & CFolders based on the Scenarios/Requirements of your Project.
If you are a Functional:
Then working in PLM is still easy if you have a experience of working in SAP,
First part of your PLM is PDM (Product Data Managment) which deals with
DMS, ECM, CAD Integration, Material Master, BOM etc
Basically you have to integrate all these objects or business objects precicely speaking to all the modules of the SAP R/3.
Welcome to the board.
If you have any specific questions, you can write at SDN, SDN team will help you at maximum, no need to worry.
Best Regards
Rehman
<b>Mark Useful Answers</b>

Who uses cProjects for IT internal projects ?

Hi togehther,
is there someone who uses the cProjects System to handle IT-Projects?
Which templates do you use for IT-Projects?
How to start such a project?
best Regards,
Carsten Schulz
ebmpapst - Germany

Greetings.
We are in the process of impmenting SAP Suite in our organization. I am trying to promote the use of xRPM and cProjects during the impmentation. The main reason is that we are looking for a sloution for our core activities which is related to development project fianiancing. The use of xRPM and cProjetcs will give a good chance whether this sloution is suitable for us. The other reason is to enforce good project managment discpline by utlizing cProjects stage-gate concept.
I wish to hrear from others on thier expricne of using cProects in IT projects, speciaclly for SAP realted projects.
Regards,
Abdullah

To create the follow up transaction automatically on status change in sap crm?

To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

Hi vishal,
As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
this is requirement of client.
now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

Automatic creation of PM order by a project

It is possible to automatically create a PM order on a Project?, I already have the configuration to link PM orders to a project.
If so, please give me a tip for it.
Best Regards...

Hi Juan,
You can do it by linking a Maintenance Plan and Milestones.
create Maintenance plan cycle
Create a mile stone in your project.
Trigger a milestone function module.
Inside the function module call the function module to tigger the maintence cycle with will create the MO when the milstone is triggered.
You can also explore variant configuration for doing this.
Regards,
Ramesh

SAP Enterprise Project Connection 2.0 in SAP ECC 6.0 EHP6

Hello experts,
Before describing any think let me tell u that i am very new to this field.
We are configuring SAP Enterprise Project Connection 2.0 in our SAP ECC 6.0 EHP6 .I have already installed ABAP add on for EPC in ECC system.
I have also installed trial version of primavera6 in another system.So now how can i connect my ECC system to Primavera6 through Enterprise Project Connection(EPC). I have gone through the installation guide for SAP Enterprise Project Connection 2.0 SP2.But i could not get any clear idea.
Any reply is helpful for me..
Thanks
Debasis

Hello Debasis,
Post EPC installation,you need to perform configuration of EPC through portal.You can see it listed under configuration--> configuration scenarios-->EPC.
During configuration you will be asked to define path of you primavera installation and a user on that system with sufficient permissions. This user is called APS user.
Try to do a mock configuration run on sandbox/dev system and then you can follow the guide.
Regards,
Hetal

SAP Retail Project - Assembly Order configuration

Dear all,
We are into SAP Retail Project, as per the process we have to generate an assembly order to our internal workshop to assemble the product.
this assembly order has to generate from sales order. Articles required to assembly will be maintained in workshop only.
we are not implementing Production module, we are trying to create a purchase requisition from sales order. but the BOM main items purchase requisition is not getting generated and there is no communication between sales order and workshop regarding Assembly process.
I am expecting an expert advice, with config steps to map this process into sap. Your suggestions will be highly appreciated.
Thank you
Raghu ram.

Hi Mohan,
Thanks for the useful link you shared.
But I am looking for specific configuration and master data set up required for store order creation scenario where " Warehouse stock is created if stock exists else third party order is created"
This option is activated in POS interface inbound profile for store order control by selecting document categorydefault as "A - Warehouse order if stock exists, otherwise third-party order"
Just wanted to understand how this option works by requiring what kind of configuration and master data settings.
Any further suggestions will be really helpful.
Regards,
Debraj

SAP CRM Projects Implemented or Done in India Required Urgent and Important

hi, friends and experts
      I wish u could send me SAP CRM Projects done in india with information including, Clients Name Operations, Duration and Location as soon as possible. Its urgent and important. Pls send the details.
                                                  thanking you
                                                         with regards
                                                   PRAVEEN

There are several potemtial root causes.
+ NetWeaver Mobile/DOE is not setup
+ DOE -> CRM should be Trusted RFC
+ CRM application user ID should be in DOE

Role of a Security Consultant in an SAP implementation Project

Hi All,
What is the role of a Security Consultant in an SAP implementation Project and the stages in which he is involved?

Hello Mohammed,
The role of a Security consultant in any SAP product implementation (not just GRC) is wide enough and it's hard for anyone to sum up on a single forum post. Still I can give you some pointers.
Security consultants come from different backgrounds, some from networking, database administration, infrastructure and even development like me. They contribute enormously to any product implementation from scratch (landscape design) to go-live (and continuous maintenance) so they are active on every phase of the implementation.
Following are some of the activities they may perform (or participate)
-System Landscape Design (work closely with BASIS and DBAs)
-Check Infrastructure feasibility from security perspective (For Portals exposed to internet or extranet work closely with network providers for firewall security, VPS etc.)
-Propose security guidelines, access policies, disaster recovery plan, business continuity roadmap (work closely with information security consultants and internal auditors or risk management teams)
- Implement SAP solution specific Security measures (involves almost every SAP solution) for example: SAP R/3 security, GRC, BW/BI, HR, FI, Portal security etc.
- participate in application integration for example: LDAP, IDM, SAP UME, shared directories etc (User master records security is on high priority).
- Check for any possible backdoor access vulnerabilities (ex: open RFCs, function modules like ping_rfc), and it involves almost all SAP solutions and there are special procedures to analyze such vulnerabilities.
there are many such activities that a security consultant perform on day to day basis. Please do not interprete the above mentioned activities (entirely) as a criteria for any security consultant profile. There are many many possibilities for a security consultants to work from pen testing to SoD violation remediation. That's why I said it's not easy to sum up security.
Always remember, Security and GRC are two sides of a coin they work together. however GRC is more of a combination of policy, regulation, events and involves management participation whereas security is a purely technical practice.
You may also be interested to know what it takes to become a forensic security specialist. Take a quick look at [http://amudee.com/?p=378|http://amudee.com/?p=378]
Best Regards,
Amol Bharti

Function Point Analysis for SAP BW Projects

Hello All,
Have been assigned a task to come up with Function Point
analysis for SAP BW projects.
Any help will be appreciated.
Thanks,
Mainak

Hi Mainak,
Function Point Analysis is independent of technology, methodology or platform, so there is no function point analysis specific for sap bw, rather you should familiarize with the fundamentals of FPA.
And as you might know, FAP is used to determine whether a given a tool, an environment or a language is more productive when compared to others.
I can send you good links if you can give me your email-id.
Hope this helps...
Thanks,
Raj

QA job for sap bw project

Hello Gurus,
will you please tell how to do QA job for sap bw project?
Many thanks,
Frank Zhang

hi chakri,
i sent some docs to your mail i.d
also refer to these links
http://help.sap.com/bp_biv235/bi_en/html/BWspecific_Info.htm
http://help.sap.com/bp_biv235/bi_en/documentation/Multi-dimensional_modeling_EN.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2b50ac90-0201-0010-d597-8d833833f9e0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/828d9590-0201-0010-95a7-ea8cf8814b94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
Also for Bw case studies u can refer to these links
http://help.sap.com/bp_biv135/index.htm
http://service.sap.com/bi .
regards
ravi
<b> Assigning pts is the way of saying thanks in sdn</b>

Cutover checklist for SAP BI project

Hi All,
Please share the cutover checklist for SAP BI project.
Thanks
Sandeep

sandeep,
please give us details of ...
where you are on the upgrade
landscape you are trying to upgrade
nature of systems ....
cutover depends on :
1. criticality of systems and their availability
2. Nature of upgrade - if you are upgrading your sandbox - then cutover is just a formality
3. Ensuring that no data loss happens...
Please be more specific - also search the forums on the same ..... this has been discussed a lot many times...
since you have not given details - I expect that you will be adding more details to your post and am not locking your post....
Arun

SAP XI project - proof of concept

What will be tasks of an XI consultant for a SAP XI project - proof of concept stage.
Thanks,
-Naveen.

Hi Naveen,
As an SAP XI proof of concept...
First you need to understand what what Business System your are integarting or migrating any existing Interfaces in that case...you need to analysis how the interface is developed in that particular Tool..you need to analys the code if and business functionality with the Buiness Analyst and with the endusers..
This will be done usually for set of interfaces but not a single interface as an when the requirements,Business Process list,architecture,Communication plan,logic data model,usecase ...
you need to do design documents in which you need to explain you interace design and flow of it and design mapping documents for partiuclar inteface...
accoding to the time factor the initial face takes some time but designing document and mapping spec takes around 2 to 4 days
Amaresh

Automatic assingment of Cprojects to SAP PS project

Similar Messages

Maybe you are looking for