Automatic back up on Cisco devices

I am planned to do the automatic configuration on all my network devices.. I had successfully implemented automatic back up configuration on Router and switches with krone policy. But i am not able to configure the same on ACS,ACE & ASA firewall and ISE.
all are cisco devices. I can able to configure krone policy on ACS but back up was not working, kindly suggest how to configure automatic back up on above said devices.

archive command we had bug in cisco. It not taking the back up correctly as per time configuration. Right i am looking freeware to take the back up locally with my windows machine.
Marvin option was good. But we need linux server( VM need to create) and also network not much aware of linux commands. So its difficult for us implement with out much knowledge about Linux.
I had implemented krone policy but its working fine for router and switch only then i had problem to take back up of ACS,ISE,ACE and firewall . The automatic back up tool should be unique.

Similar Messages

The backup files for my devices are saved to my internal hard drive. I have a small internal hard drive and would like them to be saved to an external drive. How can I change where iTunes automatically backs up to?

The backup files for my devices are saved to my internal hard drive. I have a small internal hard drive and would like them to be saved to an external drive. How can I change where iTunes automatically backs up to?

This has nothing to do with iTunes as iTunes provides no way to move or relocate the backup files.
A search of google or the fourms would reveal ways to create a folder link to relocate the physical location where the files are stored.

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

You can't. iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and The following is from this Apple document: iCloud: Backup and restore overview.
iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails
But not from a Mac. If you want to backup your photos and other important files I suggest you get an external hard drive and use it with Time Machine.
OT

Is there a comparable automatic back-up system to Time Machine for 10.4.11?

My dad has 10.4.11 running on a G4 tower.
I want to get him a back-up system that will save all his work.   I myself have an Intel Mac running 10.6.8, with Time Machine saving all of my work to an external HD.
I know you can't use Time Machine with 10.4.11   Is there a comparable back-up system to TM that does automatic back-ups for 10.4.11?
(One other note--he still maintains Classic OS 9 on his system as well as 10.4.11.   Will the back-up device also back up whatever he has on OS 9 as well as 10.4.11? And does it also back up the actual system software--the OSs 10.4.11 and 9--as well as all the files? So if he needed the backups, he would not need the system discs?)
Thanks for your help!

I'm sure Tr-Backup 5.1.7 will do everything you want, & far more that TM...
http://www.tri-edre.com/download/download/downloadtbu.html
From the PDF...
Basics ............................................................................... ....................................8
Two types of action: Immediate and Programmed ...........................................................8
What can be backed up or synchronized? ......................................................................8
Bootable copy of your startup disk ............................................................................... ..8
Backing up ............................................................................... ..................................8
Backup placement ............................................................................... ........................9
Restoring ............................................................................... .....................................9
Synchronizing ............................................................................... ...............................9
Multiple configurations ............................................................................... ................10
Backup Strategies ............................................................................... .................11
The copy of your hard disk ............................................................................... ...........11
What kind of backup to use? ............................................................................... .......11
Background execution ............................................................................... .................12
Create configurations for every backup .........................................................................12
Backup of several computers over the network .............................................................12
Back up your backup! ............................................................................... .................12
The Different Modes of Backup .............................................................................13
Manual Backup from the Desktop ............................................................................... 13
Using the Synchronization features ..............................................................................1 3
Immediate Backup ............................................................................... .....................13
Programmed Copy ............................................................................... ......................13
Programmed Mirror Backup ............................................................................... .........13
Programmed Evolutive Mirror Backup ...........................................................................14
Programmed Incremental Backup ............................................................................... .14
The Different Modes of Restoration .......................................................................16
Manual Restoration from the Macintosh Desktop ..........................................................16
Using Synchronization to Restore ............................................................................... .16
Using Immediate Copy to restore........................................................................ .........16
http://www.tri-edre.com/pub/files/tribackup5_en.pdf

My iphone 5 is not backing up, it's connected to wifi, locked and plugged in. It was automatically backing up regularly until Oct 27, now it just sits in limbo.

My iphone 5 is not backing up, it's connected to wifi, locked and plugged in. It was automatically backing up regularly until Oct 27, now it just sits in limbo. Now it won't work manually, nothing. Any suggestions out there?

Hi Omanaomi,
It sounds like you may be trying to back up your iPhone to iCloud. Try these methods to initiate the backup first:
iCloud: Back up your iOS device to iCloud
http://support.apple.com/kb/PH12520
If you are still unable to back up your iPhone to iCloud, you should see an alert message, the meaning of which can be explained by this article:
iCloud: Understanding Backup alert messages - Apple Support
http://support.apple.com/en-us/TS4576
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Once Icloud has automatically backed up my phone, where do i go to retreive my backup information?

Once ICloud has automatically backed up my phone, where do i go to retreive my backup information? Also if the backup is successful, can i delete an item off of my phone and it remain in the photo stream?

Welcome to the Apple Support Communities
To retrieve the backup information, you have to restore the backup onto the iPhone. To do it, first you have to restore or erase your device (go to Settings > General > Reset > Erase All Content and Settings). Then, you will have to set up the device again, and it will ask you to restore a backup, so follow the steps in order to restore the backup.
If you delete s photo from your device, it will still remain in Photo Stream. However, note that Photo Stream deletes photos 30 days after adding them

ISE version 1.0 - Unable to get management access for cisco devices

Hi All,
I want to manage all cisco devices with read and write privilege with ISE 1.0.
Is this functionality is available in this version?
I configured the 2960 switch. On switch redius test is successful. When I telnet to the switch, it ask for username and password. But message is authorization fail. But on ISE shows authentication is successful.
Is it configuration issue or this feature is not available in this version?
Regards,
Hanumant

Hanumant,
You will have to create an authorization profile to send back the privilege level for the user:
Here is the attribute (cisco-av-pair) you will have to send back:
shell:priv-lvl=xx

Change hostname on Cisco devices that are in production

I'm new to Cisco devices and to my current job as network analyst. Mostly in an attempt to establish consistency and to ease identification, I'd like to change the hostname of most of our Cisco switches and routers. However, I don't want to create any other problems.
If I proceed with the hostname change on our Cisco devices that are in production, would there be any negative impact that I may expect?
Thanks in advance!

Hi
Couple of things spring to mind
1) DNS resolution. How do you resolve the hostnames for your routers/switches now ?. if you do it via DNS then you need to update it to reflect the new name.
2) Any scripts etc. that you may use to automate taks on your network may need updating although if they use DNS to resolev just see 1
3) SSH. If you are using SSH to manage your routers/switches and you change the hostname the ssh key will become invalid. You will need to regenerate the key.
HTH
Jon

Fine tuning the logging to cisco device

Dear Netpro Community,
I am trying to fine tune the AAA portion on the cisco device
Here is my current configuration:
aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
If the radius server is offline, the first level is not a problem. However, the issue occurs if I want to go to enable mode. It will not use the enable password defined locally, but instead it will go to and search for radius server for authentication.
Debug:
test_switch>en
Password:
01:05:15: RADIUS: Authenticating using $enab15$
01:05:15: RADIUS: ustruct sharecount=1
01:05:15: RADIUS: Initial Transmit tty0 id 44 x.x.x.x:1812, Access-Request,
len 72
01:05:15: Attribute 4 6 AC10E10F
01:05:15: Attribute 5 6 00000000
01:05:15: Attribute 61 6 00000000
01:05:15: Attribute 1 10 24656E61
01:05:15: Attribute 2 18 69ABFDF8
01:05:15: Attribute 6 6 00000006
01:05:20: RADIUS: Retransmit id 44
01:05:25: RADIUS: Retransmit id 44
01:05:30: RADIUS: Retransmit id 44
Password:
01:05:35: RADIUS: Marking server x.x.x.x:1812,1813 dead
01:05:35: RADIUS: Tried all servers.
01:05:35: RADIUS: No valid server found. Trying any viable server
01:05:35: RADIUS: Tried all servers.
01:05:35: RADIUS: No response for id 44
01:05:35: RADIUS: No response from server
% Password: timeout expired!
% Error in authentication.
How do I ensure that i can access the switch in privilege mode if there is no path to the radius server?

Jagdeep:
With the default "radius-server retransmit" value, there are (potentially) three retransmissions that may occur if the RADIUS server doesn't respond to the first request. With a 1 sec. "radius-server timeout", this provides a four second window of opportunity for a successful response.
If he doesn't want to use a "radius-server timeout" as low as 1 sec. (per your concern), he can use the "radius-server retransmit" command to constrain (to a reasonable period) the time required to mark an MIA RADIUS Server as dead.
e.g.:
radius-server host aaa.bbb.ccc.ddd auth-port 1812 acct-port 1813 timeout 2 retransmit 1 key xxxxxxxxxx
Contrary to your statement, your approach and mine are trying to facilitate the same thing, i.e.: accommodating fall back to the enable method prior to login timeout.
However, your recommendation only results in a successful login after 20+ sec., due to postponement of fall back, resulting from the 20 sec. spent determining that the MIA RADIUS Server is dead.
I don't ever want to wait 20+ sec. for a login, and don't find it necessary to wait that long to conclude that an AAA server is MIA.

Simple question: I placed a document in iCoud on my iMac and it appeared on my iOS devices. If I change it on my iPad it changes on my iMac. Now, how do I change it and save it on my iMac so it automatically changes on my iOS devices?

Simple question: I placed a document in iCoud on my iMac and it appeared on my iOS devices.
If I change it on my iPad it changes on my iMac.
Now, how do I change it and save it on my iMac so it automatically changes on my iOS devices?

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Unable to open 2 9509 switches at the same time in Cisco Device Manager

Dear Friends,
There are a pair of MDS 9509 switches whose management addresses are 172.16.2.197 and 172.16.2.198.
When we try to manage these Devices through Cisco device manager, the first device opens up without any problem, but when the second 9509 is opened in Cisco Device Manager, it fails giving the following error message:
"Open udp transport failed: Address already in use: Cannot bind"
To get around this issue, if we close the first interface to the 9509 switch, then we are able to open up the second 9509 in Device Manager.
We have this problem only in Cisco device manager. If we open one switch in Cisco device manager and the other switch in Cisco Fabric Manager, it works.
Also, we can telnet to both the devices successfully at a time.
The device manager in use is 4.1.
Please find enclosed the sh version outputs for your kind reference.
Can you please help me understand the cause of this issue?
Thanks a lot
Gautam

Is it always the same MDS that fails to open, or can you open either one first, and then the second one poses the problem (no matter which one is second)?
Can you try from a second work station and see if you can open DM to both switched at the same time? I suspect the address it is complaining about is the local workstation IP, not the MDS IP.
If you open the FM map, then you click on the MDS ICONs, can you open DM to both MDS?
- Mike

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Time Machine NOT automatically backing up - Help

Running 10.5.2 on my MBP and MB. Have a TC 500 installed yesterday. Did the initial backup on both. Seems that Time Machine will not backup to TC unless I click on TC in my finder (to mount). If I restart or sleep the computer or switch networks (and come back to TC) TM doesn't backup. Been 3 hours since I've been back on the TC. Is there something I need to set up to get the computer to automatically back up without me having to tell the computer the TM designated disk is available. Thanks.
Sean

I hope this helps you...I just spent 3 hours on the phone with Apple Care and finally got the problem fixed. The problem was the NAME OF THE time capsule. I had used "Tony Ry*****'s Time Capsule" (I used xxxxx because I prefer not to use my whole last name on here). In any event, the name was too long! I changed it to "TimeCapsule" in Airport Utility. To do this, launch Airport Utility, click on "Manual Setup". Under the "Disks" section, you will see the name of your time capsule listed under "Time Capsule Disk" . Click on that, and to the right a white dialogue box will appear where you can change the name. Change it to something short with no spaces, or " ' " . After doing that you will need to go into the time machine preferences and select a new backup disk (since you changed the name). This worked perfect for me. Hope it helps you!

Does TM automatically back up external drives or only internal?

I have two external drives....one that I am backing up to (500GB) and one that will hold all my iphoto/tunes files (1TB). Will TM automatically back up the photos/music drive directly to my TM drive?
Also, the above drive I just bought is an iomega 1TB drive. TM said it was wrong formatting for backing up to, but can I still copy my files to it and will TM back up those files (to the other ext drive) without having to reformat it? If not, how do I reformat it?

ecddesign wrote:
I have two external drives....one that I am backing up to (500GB) and one that will hold all my iphoto/tunes files (1TB). Will TM automatically back up the photos/music drive directly to my TM drive?
Time Machine can back it up, if it's formatted for a Mac. Look in the exclusion list in +TM Preferences > Options.+ If the drive is listed there +*in black,+* it means it's not being backed-up, but can be. All you have to do is select it and click the minus sign at the bottom.
But if it's listed +*in gray,+* it means it's not formatted properly. Time Machine cannot back it up, and you can't remove the exclusion. You'll have to reformat it (which means erasing everything on it).
Also, the above drive I just bought is an iomega 1TB drive. TM said it was wrong formatting for backing up to, but can I still copy my files to it and will TM back up those files (to the other ext drive) without having to reformat it? If not, how do I reformat it?
See #5 in the Frequently Asked Questions *User Tip,* also at the top of this forum. Use the same procedure to format both drives.

I automatically back up my hd and now can't use my itunes library... Help!

I started using a Lacie external hd to automatically back up my hard drive using the time machine application. however, now when I try to play the music from my itunes library (or anything else for that matter) I get a message saying: "it can not be played because the original file could not be found" it then ask if "I want to locate it". I click yes but it only takes me to the drives directory.I go to the library in the external hard drive but when I find the itunes library in that hd and click to open,it sends me back to the original library and the whole cycle starts again.
Can anyone explain me what's happening and how I can get get my library back to play the music?

I'm glad that you were able to find one. I can't find the Twitter add-on that you had. Or at least it won't work with Firefox 29. I was able to find something that I think will do the trick for you. [https://addons.mozilla.org/en-US/firefox/addon/twitter-app/?src=ss Firefox Twitter Appp] I would say try that. You did not say that you have ad block + yet. So here is the link to that [https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/?src=ss Adblock Plus] . Hope this helps.

Automatic back up on Cisco devices

Similar Messages

Maybe you are looking for