Automatic Batch determination at time of Goods receipt for production order
Hi SAP experts,
Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
I have done the following settings:
1.Specified batch level at material level
2.External batch number assignment
3.Defined production order condition table '501' (plant/material)
4.Defined production order access sequence (order type-plant -material)
5.Defined Production Order Strategy type.
6.Defined Batch search procedure in Production Order.
7.Assigned Batch search procedure to Production order type for a particular plant , batch check not activated.
Please let me know of any more settings to be checked for the same.
For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components is taking place for 1 EA qty. from 5 different batches.
So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
It is desired that the system should do GR for the qty. 1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
Thanks in advance. good day.
Best regards,
RB
HI Rahul,
As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
I am not sure if i understand your requirement 100%.
But let me explain you standard behaviour.
When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
Check and Revert,
Santosh Sarda
Similar Messages
-
Batch derivation in goods receipt for production order
Hi all,
i have set up batch derivation for the event 'goods receipt for production order'. The field derived is HSDAT (date of manufacture) /minimum. Although in the batch derivation monitor I can see tha the derivation was performed OK and the correct date (oldest of the components) is selected the field in the Batch is not updated. Can anyone help??Hi Vagia,
Your problem sounds like derivation type issue.
Please check your derivation type to be static for the 400 event.
Let us know if this helped.
Regards.
St.Pan. -
Bins problem while creating goods receipt for production order.
Hi All,
I am facing a problem with selection of bins while creating goods receipt for production order in transaction MB31 and MBBE.
The order of filling bins is with respect to storage Unit not by document no, Please suggest something.
The scene is like that.
The bins are not filled in the proper sequence, the system checks for the empty bins and filled those later on.
like this,.
Typ StorageBin SC SS Stock Avail.st BUn GR Date DocumentNo Storage Unit Time
SLoc Batch Re IA PutawayS Pick qty Cert. No.
VN1 106A088 0 0 CS 01/25/2010 4739297 1005721391 10:00:59
100 0001020069 60 0
VN1 107B076 0 0 CS 01/25/2010 4739298 1005721392 10:01:01
100 0001020069 60 0
VN1 108B076 0 0 CS 01/25/2010 4739299 1005721393 10:01:04
100 0001020069 60 0
VN1 109A077 0 0 CS 01/25/2010 4739300 1005721394 10:01:06
100 0001020069 60 0
VN1 110B079 0 0 CS 01/25/2010 4739301 1005721395 10:01:08
100 0001020069 60 0
VN1 106B088 0 0 CS 01/25/2010 4739302 1005721403 10:01:11
100 0001020069 60 0
VN1 123B158 0 0 CS 01/25/2010 4739303 1005721389 10:01:13
100 0001020069 60 0
VN1 124A160 0 0 CS 01/25/2010 4739304 1005721390 10:01:15
100 0001020069 60 0
VN1 118A133 0 0 CS 01/25/2010 4739305 1005721396 10:01:17
100 0001020069 60 0
VN1 119A128 0 0 CS 01/25/2010 4739306 1005721397 10:01:20
100 0001020069 60 0
VN1 120B162 0 0 CS 01/25/2010 4739307 1005721398 10:01:22
100 0001020069 60 0
VN1 121B159 0 0 CS 01/25/2010 4739308 1005721399 10:01:24
100 0001020069 60 0
VN1 122B159 0 0 CS 01/25/2010 4739309 1005721400 10:01:26
100 0001020069 60 0
VN1 123B159 0 0 CS 01/25/2010 4739310 1005721401 10:01:29
100 0001020069 60 0
VN1 124B160 0 0 CS 01/25/2010 4739311 1005721402 10:01:31
100 0001020069 60 0
Thnks you,
Anmol.
Edited by: anmol112 on Jan 25, 2010 10:34 PMno replay, clossing threat.
-
Error during Goods Receipt for Production Order
Hi All,
When using MIGO to post Goods Receipt for a Production Order, I got a customize message saying that the posting is only available between 2010.08.25 to 2010.08.27. I have checked in Business Add-in using SE19 but there are no implementation present. I know that in Logistic Verification MIRO there is a transaction OMRM to set messages. I would like to ask is there anything similar for MIGO.
Or is there any other place in Configuration which allows me to add these Customize message.
Thanks.
Edited by: jamison2004 jordan2004 on Jul 9, 2010 9:09 AMHello Jiaul,
Sorry I may have mislead you. The actual error message is "Goods Receipt for Production Order XXXX can only be made on 2010.08.25 to 2010.08.27". These two dates are the Start Date and FInish Date for the Production Order in CO03,
The Basic Start Date for the current Production Order is 2010.08.25
The Basic Finish Date for the current Production Order is 2010.08.27
I think what it means is that you can only Post Goods Receipt for the Production Order only after the Basic Start Date of the Production Order. Do you know where I can find the configuration for this message?
Thanks -
Good receipt for production order
Hi experts,
When good receipt for production order 60003408 , it shows error "No valid order items exist for order 60003408" like this how to resolve this...
In diagnosis they were specified as change into good receipt in production order screen but in default it shows GR Non-valuated.
ThanksHi,
You can create production order directly from sale order at CO08.
You can create the production order without material in CO07.
CO07 specially meant for Rework order (Production order without material)
Hope claer to you.
Regards,
R.Brahmankar -
SAP how to determine the account in Goods receipt for purchase order?
We know when we make a Goods receipt for purchase order,we will use the account in GBB and BSX define in OBYC. But where can we find the rule? I mean why system can find the account in GBB and BSX , not the other TEcode?
HI
This is again based on the movement type which SAP has created a link internally.
So if you see when a document is posted it basically derives the GL accounts based on the Movement type,Valuation class,valaution area and so on.
Good luck
Hari -
Early Inspection for a Goods Receipt for production order
Dear Experts,
This is with respect Early Inspection for a Goods Receipt for inspction type 04.( 03 is also active in material master)
We made partial confirmation 250 qty for production order using t code co11n ( total qty of production order is 1000).
made the usage decision with an acceptance and posted all open stocks. to unrestricted.
Now in second partial confirmation prodn order of 250 qty was made . This suppose to be rejected . but sytem will add this 250 qty directly to unrestricted stock . how to over come this .
Regards
SandeepDon't make the UD until all stock has been receipted?
You basically approved the batch. So why wouldn't the system put the stock to unrestricted?
Why would you make a UD when you still have stock to be posted anyway? You can post stock without without making a UD so why not just post some if you need it, and wait on making the UD?
Craig -
Goods Receipt for Production Order SDK example
Hi all,
Is it possible to do a goods receipt for a Production Order with the SDK?
(I've tried but have no ideia hoe to fill the Documents & Document_Lines objects)
If somebody could help me by providing an example, it will be great!
Thanks all!
mdiasOk, I've found the solution.
I only need to set BaseType = 202 of my Documents object.
Thanks anyway,
mdias -
Error while doing Goods Receipt for Production Order
We have created following test data in our Development System:
Production Order:1000016
We have processed the abv. production order thru create, release & confirm stages.However, on doing Goods Receipt of the Order thru MB31, system is giving following error:
Msg.No.NA M7001:Check Table TFBEFU_CR entry 10 does not exist.
Can u pl help me in analysing the same.
With Rgds.,
Rakesh Kumar
09324847499Hi,
Maintain the OPK9 (Valuation Variant for the Order Costing).
It will go thorugh..
Otherwise revert for further discussion..
Regards,
Siva -
Goods Receipt for Production Order
Dear All,
I am Creating a Production order manually and assigning the Project WBSE in Assignment Tab.
Then i conformed the order. Now i am doing the MIGO for goods receipt against that Production Order.
System is receiving the stock in Pant, not as a Project stock. But as per my requirement it should be created as a project stock.
So please tell me what is the issue in this...
Regards,
Rao
Message was edited by: Mohamed Rafi - Search forum, refer SAP Help.Hi,
I find the settings as below.
Item cat: L
Priority
Plant 2
Project 1
Sales Ord 3
Regards,
Rao -
Goods Receipt with production order in WM
Hi all,
My client requirement is whenever i am issuing goods to the production order the stock reserved to production order, once i confirmed the TO stock level reduced.Once production completed when i put the goods receipt with production order the stock increased for finished goods only at storage location level not upto warehouse level.
when i put goods receipt with others the stock increased in warehouselevel upto my destination bin(as i configured).My requirement is how to move goods to my destination bin when goods receipt for production order. any configuration required? solve my issue
i am maintaining configuration as
i)in omlj iam using movt type-103, source as 901(scr checked),dest as 003,reqirement type-orders.
ii)in omlr i am assigning 103wm mov type to 101 im type.
whether my configuration is correct or i have to do any other configuration ?..i am not maintain any production staging process is it necessary?
appreciate your help always
rameshTo consolidate your requirements once again
You want imediate TO creation for components. (It is configured & working fine now)
You dont want imediate TO creation for finished goods, only in the case of GR for Productio order. Right?
If Yes, you need to have a small configuration setting (if it is missing)
In OMLR Create TO immediately Indicator should be space "Do not initiate TO creation" (not X) for 101 F - 103 -
User Exit for MSC2n( Batch) while doing a Good receipt for an order
Is ther any exit to update the Date1 field(MCHA-FVDT1) in MSC2n( Batch) while doing a Good receipt for an order
Thanks in advanceHi Varsha,
Try these User Exit.
BATCHCHK Function Module Exits for Check in Case of Batch Change
MBCFC010 Propose batch number on Inventory Management item scree
SAPLCHVW Batch where-used list
SAPLMHD1 Shelf life expiration date
SAPLV01D Determining the initial status of a batch
SAPLV01P Function Module Exits at Time Batches Are Updated
SAPLV01Z CFCs for internal batch number assignment
SAPLV1ZE CFCs for external batch number assignment
SAPLV1ZN CFCs for batch valuation in VB_CREATE_BATCH
Regards,
Vijay -
Batch number issue when posting goods receipt for Subcontracting PO
Dear expert,
I always heard there will be issues while posting goods receipt for subcontracting PO. If the component is managered by batch.
No batch number will be proposed during PGR in MIGO...
I dont quite understand where is the issue??
My understanding:
We have batch managered components and End Product. All have batch numbers, then we PGI the stock to 'SC stock' via 541 movement type.
Then Vendor will finish the end product and send us back the end product.
We consumption the components use 543 O movement type? And GR the end product..
So while goods receipt, the sytem just need pick the existing batch number for both components and finish products..
Where are the issues???
Thanks.Hoo Laa wrote:
I have questions for people always mentioning there are issues with batch determination while post goods receipt for subcontracting orders.
>
> I am thinking maybe they didnt active the batch determination for 543 movement type..
>
> Thanks.
Hi Hoo,
You are right!!
Setting of batch number determination has its importance in Mvt Type be it 541, 543....
The issue you might have observed would be with Batch Determination in Goods Issues which folks find it bit tough to achieve n make it work for them.
Cheers!!
Shiva -
Error: GR "Goods receipt for purch. order" is not allowed (ORD 4000048)
Hi gurus, can anyone please help me
while doing service entry for the PO with account assignment F and Item Category D
our client is facing the error
"Goods receipt for purch. order" is not allowed (ORD 4000048) MSG no: BS007
Diagnosis
The current status of object 'ORD 4000048' prohibits business transaction 'Goods receipt for purch. order'.
Procedure
To process business transaction 'Goods receipt for purch. order', you first have to change the status of object 'ORD 4000048' to allow the transaction 'Goods receipt for purch. order'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
Anyone can give the solution please
Gurukhi dear all
Really thanks for your prompt reply.
i solved this issue, as what u said, it is not released in IW31, at the time of PR creation. So i asked the User to go to IW32 anc choose the apprpriate order and change mode and click on Flag Icon to release.
Any way i awarded points for your support
Thanks
regards
Guru -
Error while doing Goods receipt for process order. Error code: "BS027"
I am getting error while doing GR for a day whereas previous day(s) GR is already done and also 2 days post that day are also done successfully.
Error : ""Goods receipt for prodn. order" is not allowed (ORD XX-CEMTSAL) " (XX = First two characters of plant code)
Error code: BS027.
Thanks to all in advance.Hello,
This issue would occur when you want to post a confirmation for a production order. The error message is generated if you wanted to post a backflush for a component and if this component was assigned to a sales order stock. The sales order itself was assigned to a work breakdown structure element which should be debited with the actual costs. However, the business transaction 'Confirm' is not permitted for a work breakdown structure.
Please look into SAP Note 62367 and 64370
Hope the information is helpful
regards
Maybe you are looking for
-
Oracle 9i - Database closed while normal use
Hi all, I have big problem with my 9i database. One of my sid get closed (sort of shutdown) while we're using it. I have no trace in alert, and no trace dumped. I don't what to do ? I have tried new allocation of space memory... Dont' work. It shutdo
-
Looks like this version of SQL Developer has lost the tables option under the Schema Browser and the Schema tree view. I can no longer view tables under a given User/ Schema. Is this a bug or am i missing something? Any help would be greatly apprecia
-
HT1338 hi has anyone been using the new OS Mountain Lion recently released?
I have had nothing but frustration with the new Mountain Lion release First all my printer drivers have failed and I have had to re-load software drivers to get it to work. Next the Safari version needed to operate this engine is not supported by my
-
Problem displaying oracle.sql.timestamp columns
When displaying table contents using the editor, column values of type oracle.sql.timestamp show up as "<error>". In the "SQL Results" window, for colunms of this type, the column value shows only "oracle.sql.TIMESTAMP. Does anyone know if there is a
-
My microphone no longer works although my audio still works.
Could someone please help me resolve this problem? Thanks.